Progress thread Stretch For the Stars...Land in the Cul de Sac!!!
- Thread starter longstretch
- Start date
-
- Tags
- 7 inches 8 inch 8 inches ads autoextender average ball skin base girth beginner bib hanger circulation cockring condom cum dating depression discoloration dld blasters doublelongdaddy edging effective equipment erect erection erection quality erections exercise exercises extreme flaccid foreskin gain gaining gains gaiter genetics girth girth gains glans growing growth hands hanging ide inner penis jelq jelqs kegel larger length gains length master load malehanger mandingo stretch massive masturbate masturbating nerve damage newbie routine painful pelvis penis penomet phallosan posts progress pump pump sleeve pumping pussy question quick gains recovery remedy research results reverse kegel review routine sensitivity sex short shower shrink skin sleeve sleeves slow squash jelq ssj stretch stretched stretcher stretching stretchy suction supplement support supra slammers tender tension testicles thick tingling tugging vachanger vacuum veins wide workout wrap x 50
06/17/14: Tuesday
65 min Hanging SD Sitting @ 7.5 pounds
Comments: I did have some fluid build up tonight. I think it's a combination of using old tape and the long session just coming back from a break. I will increase weight back to what I was using but shorten the set next time. My next hanging session will most likely be tomorrow, I got a date tonight, but I will use that as an opportunity to cut new tape and take pics. My setup may change as weight changes but I will keep it updated
65 min Hanging SD Sitting @ 7.5 pounds
Comments: I did have some fluid build up tonight. I think it's a combination of using old tape and the long session just coming back from a break. I will increase weight back to what I was using but shorten the set next time. My next hanging session will most likely be tomorrow, I got a date tonight, but I will use that as an opportunity to cut new tape and take pics. My setup may change as weight changes but I will keep it updated
Last edited:
06/18/14: Wed
55 min Hanging SD Sitting @ 8.75 pounds
06/19/14: Thursday
15 min Dry Jelq
55 min Hanging SD Sitting @ 8.75 pounds
06/19/14: Thursday
15 min Dry Jelq
This post will be a long one and is to document my current setup with the LG Hanger. It is subject to change.
All materials I use. I'm cut so this is how I attach mine. I use an 8 inch and 12 inch strip of Tender tape. The pink band is taken from an X-sleeve and is used as a girth band. The LG attaches to the penis via expansion of the penis in the hanger opposed to compression from other hangers. There is the clear sheath, two rubber bands, velcro strap, the LG Hanger & the hand-pump also
View attachment 28771
I fold the sheath a little to stretch it onto the hanger and then I unroll that flap. Part of keeping the sheath in good condition is taking it off the hanger at the end of the day and fairly often rinsing it with water and sometimes soap to keep fuzz and dust from building up. After rinsing and drying the sheath is alot more tacky and tacky helps stick to the hanger and your skin/tape better.
View attachment 28772
I tuck the sheath inside the hanger and then attach the rubber bands. The tuck is optional I just find it quicker and easier to position the bands.
View attachment 28773
Sheath untucked with bands attached
View attachment 28774
Girth band placed. I personally put it 2-3 inches down the shaft and will let the sheath roll on top of it.
View attachment 28775
I use the 8 inch piece of tape to wrap around the girth band and skin infront of it. Before doing this some of the skin in front would get sucked on in the vacuum, almost like being pinched and would leave a ring of very mild edema, no biggie but just to use caution I now wrap this area. I will slightly spiral the tape up towards the head after the first pass.
View attachment 28776
Overlapping the 8 inch piece with the 12 inch piece. Since the LG is based on expansion to grip the penis you want it tight but not too tight to halt expansion.
View attachment 28777
Squeezing the base with one hand to inflate the glans before wrapping the glans. This will give some breathing room for when you add the vacuum and eventually weights. I try to make sure the area directly under the head on the ventral side (underside) is well wrapped as this is the area where edema seems to be easily formed.
View attachment 28778
Fully wrapped penis. I wrap past head and then tuck overwrap onto self sticking tape like is recommended by the makers of the LG.
View attachment 28779
Roll of sheath onto hanger. Makes attaching easier and smoother as it will roll right onto penis.
View attachment 28780
Insert penis all the way into the well of the Hanger. I also squeeze at the base before unrolling the sheath to make my penis expand. Remember expansion is important.
View attachment 28781
Unroll sheath.
View attachment 28782
Now you'll need to know what vacuum you're going to use. The general recommendation is 1 mmHg for each 1 lb up to 15 lbs and then just keep it around 15 mmHg for each weight after. I started with 5 here because I'm helping the expansion along. I'll add vacuum to 5 mmHg and then pulse-tug to help with expansion. Repump to 5 mmHg if need be and repeat until fully expanded. Then slowly add the amount of vacuum needed for the weight used. I'm using 8.75 lbs currently so I'll pump up to 9 mmHg.
View attachment 28783
Pulse-tug/ Pulse-push. Its just adding a few pounds of pull with your hands and releasing. Rinse & repeat a few times.
View attachment 28784
Vacuum level decreased after Pulse-tug.
View attachment 28785
Pumped up to amount of vacuum needed to hold the weights. In my case at this moment 9 mmHg
View attachment 28786
Attach weight with hand-pump still connected
View attachment 28787
Attach velcro strap to better secure vacuum and prevent leaks. I place it directly on top of the girth band and helps make sure no air will leak out. I do it while the weights are attached because at that point I have reached expansion in the tube but when the weights is added the penis can thin out as its being stretched. So to prevent any air from escaping from any loose areas that might be made open during the thinning of the stretched penis I attach the velcro strap to help snug everything up.
View attachment 28788
Lifting up on the weights will prove my point as there has been some air leak before I placed the strap.
View attachment 28789
Pump back up. Lower the weights. Repeat a few times to make sure no leaks are being made.
View attachment 28790
Rest weights. I may pump up .5 to 1 mmHg more just to be sure I have enough vacuum before detaching the hand pump. Sometimes I think you can lose a little vacuum from just disconnecting the hand-pump. This time I did not. Ideally rest the weights on something that is waist level so it'll be easier to set them down to hang after you disconnect the hand-pump.
View attachment 28791 View attachment 28792
FINALLY WEIGHTS HANGING!!! Now that I have my routine down it'll take me 2 minutes to attach the hanger perfectly.
View attachment 28793
Penis did swell a little after hanging 8.75 pounds for 45 minutes. I'm coming back from taking almost a month off so some of this is due to need for conditioning again. As long as I didn't get a blister and most of it disappears within 10 minutes in case I need to hang another set I'm fine with it. The more swelling the longer it takes to go away of course, not to mention chance of blisters forming increase. To this day with all my vacuum hanging I've had much worse edema but no blisters.
View attachment 28794View attachment 28794View attachment 28795
10 min after hanging. Most of the swelling is gone.
View attachment 28796View attachment 28797
All materials I use. I'm cut so this is how I attach mine. I use an 8 inch and 12 inch strip of Tender tape. The pink band is taken from an X-sleeve and is used as a girth band. The LG attaches to the penis via expansion of the penis in the hanger opposed to compression from other hangers. There is the clear sheath, two rubber bands, velcro strap, the LG Hanger & the hand-pump also
View attachment 28771
I fold the sheath a little to stretch it onto the hanger and then I unroll that flap. Part of keeping the sheath in good condition is taking it off the hanger at the end of the day and fairly often rinsing it with water and sometimes soap to keep fuzz and dust from building up. After rinsing and drying the sheath is alot more tacky and tacky helps stick to the hanger and your skin/tape better.
View attachment 28772
I tuck the sheath inside the hanger and then attach the rubber bands. The tuck is optional I just find it quicker and easier to position the bands.
View attachment 28773
Sheath untucked with bands attached
View attachment 28774
Girth band placed. I personally put it 2-3 inches down the shaft and will let the sheath roll on top of it.
View attachment 28775
I use the 8 inch piece of tape to wrap around the girth band and skin infront of it. Before doing this some of the skin in front would get sucked on in the vacuum, almost like being pinched and would leave a ring of very mild edema, no biggie but just to use caution I now wrap this area. I will slightly spiral the tape up towards the head after the first pass.
View attachment 28776
Overlapping the 8 inch piece with the 12 inch piece. Since the LG is based on expansion to grip the penis you want it tight but not too tight to halt expansion.
View attachment 28777
Squeezing the base with one hand to inflate the glans before wrapping the glans. This will give some breathing room for when you add the vacuum and eventually weights. I try to make sure the area directly under the head on the ventral side (underside) is well wrapped as this is the area where edema seems to be easily formed.
View attachment 28778
Fully wrapped penis. I wrap past head and then tuck overwrap onto self sticking tape like is recommended by the makers of the LG.
View attachment 28779
Roll of sheath onto hanger. Makes attaching easier and smoother as it will roll right onto penis.
View attachment 28780
Insert penis all the way into the well of the Hanger. I also squeeze at the base before unrolling the sheath to make my penis expand. Remember expansion is important.
View attachment 28781
Unroll sheath.
View attachment 28782
Now you'll need to know what vacuum you're going to use. The general recommendation is 1 mmHg for each 1 lb up to 15 lbs and then just keep it around 15 mmHg for each weight after. I started with 5 here because I'm helping the expansion along. I'll add vacuum to 5 mmHg and then pulse-tug to help with expansion. Repump to 5 mmHg if need be and repeat until fully expanded. Then slowly add the amount of vacuum needed for the weight used. I'm using 8.75 lbs currently so I'll pump up to 9 mmHg.
View attachment 28783
Pulse-tug/ Pulse-push. Its just adding a few pounds of pull with your hands and releasing. Rinse & repeat a few times.
View attachment 28784
Vacuum level decreased after Pulse-tug.
View attachment 28785
Pumped up to amount of vacuum needed to hold the weights. In my case at this moment 9 mmHg
View attachment 28786
Attach weight with hand-pump still connected
View attachment 28787
Attach velcro strap to better secure vacuum and prevent leaks. I place it directly on top of the girth band and helps make sure no air will leak out. I do it while the weights are attached because at that point I have reached expansion in the tube but when the weights is added the penis can thin out as its being stretched. So to prevent any air from escaping from any loose areas that might be made open during the thinning of the stretched penis I attach the velcro strap to help snug everything up.
View attachment 28788
Lifting up on the weights will prove my point as there has been some air leak before I placed the strap.
View attachment 28789
Pump back up. Lower the weights. Repeat a few times to make sure no leaks are being made.
View attachment 28790
Rest weights. I may pump up .5 to 1 mmHg more just to be sure I have enough vacuum before detaching the hand pump. Sometimes I think you can lose a little vacuum from just disconnecting the hand-pump. This time I did not. Ideally rest the weights on something that is waist level so it'll be easier to set them down to hang after you disconnect the hand-pump.
View attachment 28791 View attachment 28792
FINALLY WEIGHTS HANGING!!! Now that I have my routine down it'll take me 2 minutes to attach the hanger perfectly.
View attachment 28793
Penis did swell a little after hanging 8.75 pounds for 45 minutes. I'm coming back from taking almost a month off so some of this is due to need for conditioning again. As long as I didn't get a blister and most of it disappears within 10 minutes in case I need to hang another set I'm fine with it. The more swelling the longer it takes to go away of course, not to mention chance of blisters forming increase. To this day with all my vacuum hanging I've had much worse edema but no blisters.
View attachment 28794View attachment 28794View attachment 28795
10 min after hanging. Most of the swelling is gone.
View attachment 28796View attachment 28797
Last edited:
I haven't been logging here since my last post but I have been hanging one set @ 8.75 pounds daily for 45 min sitting SD. One day I stood and the past couple of days I hung for 50 min
No new gains yet but it's only been like a week back I believe
06/31/14: Monday
30 min Hanging SD occasionally swinging @ 8.75 lbs
45 min Hanging SD Sitting @ 8.75 lbs
07/01/14: Tuesday
2 [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x 50[/words] Hanging SD Sitting @ 8.75 lbs with 3 hours between sets
06/31/14: Monday
30 min Hanging SD occasionally swinging @ 8.75 lbs
45 min Hanging SD Sitting @ 8.75 lbs
07/01/14: Tuesday
2 [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x 50[/words] Hanging SD Sitting @ 8.75 lbs with 3 hours between sets
No but I am starting to build up some fatigue that feels really nice. Still can't [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words] but hopefully I'll be able to add that back in in a few weeks
07/02/14: Wed
45 min Hanging SD Sitting @ 8.75 lbs
30 min Hanging SD Standing @ 8.75 lbs
20 min Edging with Ejaculation
Comments: A plastic piece from the female coupling of my LG broke off that led to the metal slide, springs and pin coming out last night before my second set. I can't remember if I dropped the hanger but it is likely and I hang above concrete floors. I was able to to just stick the pump in the hole and add vacuum but I was still unsure if this would hold the pressure so I only hung for 30 min. Today I was able to connect all the parts back together and it works for now. The guys at LG Hanger are sending me a new coupling tomorrow so my fear of being away from hanging for a few days and having to send the dome in to be repaired have been relieved. I'm really loving this hanger and the company more and more everyday.
07/02/14: Wed
45 min Hanging SD Sitting @ 8.75 lbs
30 min Hanging SD Standing @ 8.75 lbs
20 min Edging with Ejaculation
Comments: A plastic piece from the female coupling of my LG broke off that led to the metal slide, springs and pin coming out last night before my second set. I can't remember if I dropped the hanger but it is likely and I hang above concrete floors. I was able to to just stick the pump in the hole and add vacuum but I was still unsure if this would hold the pressure so I only hung for 30 min. Today I was able to connect all the parts back together and it works for now. The guys at LG Hanger are sending me a new coupling tomorrow so my fear of being away from hanging for a few days and having to send the dome in to be repaired have been relieved. I'm really loving this hanger and the company more and more everyday.
07/03/14: Thurs
45 min Hanging SD Sitting
30 min Hanging SD Sitting 8.75 lbs dropped to 7.5 lbs Hanging SD Standing for 20 min
07/05/14: Sat
2 x 45 min Hanging SD at 8.75
07/07/14: Mon
45 min Hanging SD Sitting @ 8.75 lbs
Comments: Took the 4th off, had sex like 4 times Saturday and was away from home all day Sunday
45 min Hanging SD Sitting
30 min Hanging SD Sitting 8.75 lbs dropped to 7.5 lbs Hanging SD Standing for 20 min
07/05/14: Sat
2 x 45 min Hanging SD at 8.75
07/07/14: Mon
45 min Hanging SD Sitting @ 8.75 lbs
Comments: Took the 4th off, had sex like 4 times Saturday and was away from home all day Sunday
Awe DLD you should use what you got man, I just hope I just hope I don't get your sloppy seconds! I hung since my last post but I had family at my house sleeping in my room all week so I didn't get any hang time or pe in this week
That's right when the time comes the right one will find her way in your life.
07/22/14: Tues
60 min Hanging Sd Sitting @ 8.75 pounds with standing swings thrown in
Comments: I finally had the family leave and my room all to myself. I had sex on Wednesday and all weekend to make up for no PE. I came orally for the first time ever on Sunday and it was awesome!!! I definitely have a psychological holdup or something when it comes to coming orally and had to be kneeling beside her while she layed on her side. I think I have to be in control to cum. I'll be out of town this weekend but my family will be away all next week so I'm planning on making the most of my time and privacy then as well as start my routine back up
07/22/14: Tues
60 min Hanging Sd Sitting @ 8.75 pounds with standing swings thrown in
Comments: I finally had the family leave and my room all to myself. I had sex on Wednesday and all weekend to make up for no PE. I came orally for the first time ever on Sunday and it was awesome!!! I definitely have a psychological holdup or something when it comes to coming orally and had to be kneeling beside her while she layed on her side. I think I have to be in control to cum. I'll be out of town this weekend but my family will be away all next week so I'm planning on making the most of my time and privacy then as well as start my routine back up
Last edited:
07/25/14: Friday
46 Min Hanging SD Sitting @ 10 lbs
07/26/14: Sat
46 Min Hanging SD Sitting @ 10 lbs
20 min Hanging SD Sitting @ 10 lbs with some standing swings
46 Min Hanging SD Sitting @ 10 lbs
07/26/14: Sat
46 Min Hanging SD Sitting @ 10 lbs
20 min Hanging SD Sitting @ 10 lbs with some standing swings
So I didn't state this but last Saturday I developed my first blister ever. I should have know better to than to go up in weight and add pendulum swings too. Also I remember being rushed so I'm not so sure I wrapped properly. When I got out of the tube and took a shower a had a very small water blister on the right side of my glans. I popped it and then after work came home. By that time there was no blister just a slight purple mark where it was and I do remember the skin on the blister being thin so I decided to hang a short set. Well it came right back. I was thinking of using the Bib but the internet at my job went down and I didn't have time once I got home to research the things needed to make a switch to the Bib for this week. I was able to hang tonight with no problems and there is still a very thin scab where the blister was. On the bright side I'm close to a weight that I know will cause the fatigue needed for growth.
08/01/14: Fri
30 Min Hanging SD Sitting @ 10 lbs
08/01/14: Fri
30 Min Hanging SD Sitting @ 10 lbs