Gravik;454360 said:
I have a drill bit that's 5/16" or a 1/4" one. that should work right?

Then just get a screw slightly smaller?

Edit: How far up should the hole be drilled?

Exactly. Set screw hole far enough away from slits that it does not effect the integrity of the head unit.
 
Hey Seeking,
That is incredible gains in 3 weeks!
Congratulations man ...there are a bunch of us who have started this around the same time so its VERY inspirational to hear you have gains already.
3 weeks is nothing really...again congrats!

How many hours are you at per day on average?
I am at 6 per day and waiting on the elastic strap to stretch while I'm sleeping.
seeking8.5x6;454325 said:
checkin back in gentlemen, i get mad stretch with this during the day time, i have it modded to where i can increase the tension easily and release just the same. During the 3 weeks ive been using the setup with no other lengthening just girth work ive tacked on 1/4 inch in EL.

Once again awesome sttuff for gettin us all started and a good technique supra.
 
Yeah either drill bit will work.

And yeah get the machine screw AND nut to go with it that is slightly smaller.

Like DLD said drill the hole in the center of the white plastic piece of the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] at the end .

Good luck!
Gravik;454360 said:
I have a drill bit that's 5/16" or a 1/4" one. that should work right?

Then just get a screw slightly smaller?

Edit: How far up should the hole be drilled?
 
Dickleaker;454307 said:
NP Tbone!
I figure in this sport we can use every advantage we can find to get bigger cocks and we all inspire each other .
Did you try baby powder for slippage?
Its also important to :
wash ur glans every time before attaching to remove natural oils and sweat
wash the [words=http://TLCTugger.com/MOS]tugger[/words] and skin cone as well
put some baby powder on your foreskin once you have rolled it up over the [words=http://TLCTugger.com/MOS]tugger[/words] before you put on the skin cone!


I just checked some posts way back and we both started Penis Enlargement around same time.

What were your starting stats and what are you now?
I started at 6" EL and 4.5" EG last October.
Last measure in July was 7 1/8" EL and 5.5" EG.

Started last november, and was real consistent with it until the beginning of summer, which I was crazy busy.

November: BPenis EnlargementL 5.25 EG: 4.75
today: BPenis EnlargementL: 6 EG: 5.25.
 
Way to go man!

Those are great gains.

Looks like you are hooked on this now like myself.
tbone77;454430 said:
Started last november, and was real consistent with it until the beginning of summer, which I was crazy busy.

November: BPenis EnlargementL 5.25 EG: 4.75
today: BPenis EnlargementL: 6 EG: 5.25.
 
Dickleaker;454431 said:
Way to go man!

Those are great gains.

Looks like you are hooked on this now like myself.

for me, this set up is perfect. so weird....you just feel yourself getting bigger. have not done any measurements since I started with this, but I feel thicker, longer, and I hang better. Not to mention that the EQ is through the roof.
 
I know the feeling man .

Had some hot sex yesterday and during I looked at my cock and said to myself DAMN that looks big.

I am hoding off doing any measuring till Nov 1st.
tbone77;454433 said:
for me, this set up is perfect. so weird....you just feel yourself getting bigger. have not done any measurements since I started with this, but I feel thicker, longer, and I hang better. Not to mention that the EQ is through the roof.
 
Alright.

Just drilled the whole. Used a 1/4" drill bit :D

Sure is one tough piece of plastic!

Now to go get a machine screw.
 
At a boy! Not so scary? Modifications are where it is at! Takes guts and a pioneering attitude but in the end you really benefit!
 
The [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words] I have already has three holes in it. What do I have to do to modify it in order to attach the [words=http://TLCTugger.com/MOS]VLC[/words] [words=http://TLCTugger.com/MOS]tugger[/words]?
 
Can a pic and post it and I will help you :)
Sezuki;454513 said:
The [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words] I have already has three holes in it. What do I have to do to modify it in order to attach the [words=http://TLCTugger.com/MOS]VLC[/words] [words=http://TLCTugger.com/MOS]tugger[/words]?
 
mine has the 3 holes in it as well, all i did was buy a 1/4 inch hex screw about 3/4" long. boom. done. i put the screw in either of the top two holes.
 
Gravik;454522 said:
Damn, bought the wrong size screws on accident, so looks like I won't be getting started till tomorrow :(

Sorry bro, it sucks when your raring to go and all of a sudden, at 11:30 on a Sunday night you realize you have the wrong screw! FUCK! All good things take time and reason for the path they follow:)
 
Dickleaker;454378 said:
Hey Seeking,
I am at 6 per day and waiting on the elastic strap to stretch while I'm sleeping.

Man I am just ordering my strap today. The [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] with the [words=http://TLCTugger.com/MOS]VLC[/words] is a winning team - I can feel that my cock is longer - the EQ is fucking crazy with this thing. Will measure at the end of Oct!
 
I have order [words=http://TLCTugger.com/MOS]TLC[/words] [words=http://TLCTugger.com/MOS]Tugger[/words] 11 days ago and it hasn't arrive yet..<:(
How long did your shipment take?

Today I also ordered 4 additionl 2 inch rods (Jes [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words]) just in case there wouldn't be enough of them.

Can't wait to start tugging rofl
 
I'll be ordering the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] and [words=http://TLCTugger.com/MOS]VLC[/words] and all that soon! Still a bit confused on the whole thing but thats because I havent even handled the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words]
 
JohnSwindle;454671 said:
anyone working in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] with this?

Definitely, the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] is the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words] evil twin!
 
i am using the [words=http://TLCTugger.com/MOS]tugger[/words] combo everyday, and the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] every other day.

Just got the strap and larger cone....fast shipping, ordered it on Friday night....

the larger cone seems to be the ticket for me.....grabs more foreskin.
 
tbone77;454521 said:
mine has the 3 holes in it as well, all i did was buy a 1/4 inch hex screw about 3/4" long. boom. done. i put the screw in either of the top two holes.


Hey Tbone,

Did you just use the screw and nothing else? No nut for the end of the screw is needed? Did you drill through the little plasctic piece in the hole?
Thanks for for any advice you can give.
 
I just emailed Ron.. He's working on a small add-on so you don't have to drill your [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words]!
 
JohnSwindle;454717 said:
I just emailed Ron.. He's working on a small add-on so you don't have to drill your [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words]!

How long til this add-on is available?
 
lkm082;454714 said:
Hey Tbone,

Did you just use the screw and nothing else? No nut for the end of the screw is needed? Did you drill through the little plasctic piece in the hole?
Thanks for for any advice you can give.

I used a cap to a machine screw...the tension of the device will keep the screw from moving, so I just wanted something on the under side so that the screw didn't snag furniture or whatever while you are wearing the device, if that makes any sense.
 
Damnit, I thought this was going to be easy to put on :( I must just be retarded or something, but it keeps slipping off.

if someone could make a video on how they're putting it on, that would be awesome.

otherwise, looks like another night without the [words=http://TLCTugger.com/MOS]vlc[/words] :( :(

edit: The skin cone might be too small...grr, now I might have to order another one.
 
wash the [words=http://TLCTugger.com/MOS]tugger[/words], cone, and your glans. when you put your foreskin over the [words=http://TLCTugger.com/MOS]tugger[/words], put some baby powder around your foreskin, then put on the your cone. I had quite a bit of slippage early on, but that helped me a lot. I have the rc10 and the rc14, and they actually hold about the same for me. Also, as you use it, your foreskin will stretch out a little, and you will be able to get more of it around the [words=http://TLCTugger.com/MOS]tugger[/words].
 
I used a wooden hanger today for something to grab onto while stretching. It was amazing...my ligs were sore as hell. I just hooked the hanger on the [words=http://TLCTugger.com/MOS]tugger[/words] and pulled...it was simple. The helicopter stretches were awesome! :)

This [words=http://TLCTugger.com/MOS]tugger[/words] is taking my game to a whole new level!
 
BB,
Very inventive!
Will have to try that one.
BigBanker;454726 said:
I used a wooden hanger today for something to grab onto while stretching. It was amazing...my ligs were sore as hell. I just hooked the hanger on the [words=http://TLCTugger.com/MOS]tugger[/words] and pulled...it was simple. The helicopter stretches were awesome! :)

This [words=http://TLCTugger.com/MOS]tugger[/words] is taking my game to a whole new level!
 
tbone77;454723 said:
wash the [words=http://TLCTugger.com/MOS]tugger[/words], cone, and your glans. when you put your foreskin over the [words=http://TLCTugger.com/MOS]tugger[/words], put some baby powder around your foreskin, then put on the your cone. I had quite a bit of slippage early on, but that helped me a lot. I have the rc10 and the rc14, and they actually hold about the same for me. Also, as you use it, your foreskin will stretch out a little, and you will be able to get more of it around the [words=http://TLCTugger.com/MOS]tugger[/words].
Alright. Well I feel like I need a slightly bigger skin cone, so I went ahead and ordered the rc10.
 
JohnSwindle;454671 said:
anyone working in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] with this?

Hey - I am not using the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] but a Vacuum Pump - air rather than water based - same principle. I dont have alot of time so I use the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Sg[/words] with [words=http://TLCTugger.com/MOS]VLC[/words] for 2-3 hours then do 20 mins pump with 200 jelqs at 90% erect (i do this three times) every night. In the morning I do some manual stretches and a 20 min vacuum pump whilst showering then wear a cock ring for the day. I am ordering the strap that goes with the [words=http://TLCTugger.com/MOS]VLC[/words] so I can stretch through the night!
 
It doesnt matter - once its on - you can get hard, soft etc its doesnt matter- I find that it stays on. In fact when the "burn" begins to increase, I usually start reading erotic stories to get my cock hard and the burn eases a little, it lets me stay in the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]sg[/words] longer.
 
I'm very skeptical about using this for high pressure (vacuum hanging), but I'm eager to go the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] route. [words=http://TLCTugger.com/MOS]Tugger[/words] hasn't arrived here yet unfortunately :(
 
SirKyle;454767 said:
a week ago, I'm not worried yet at all.

Has Ron e-mailed you. I got an e-mail acknowledgement within a day of placing my order and it arrived three days later.

I could not get it mounted for the past two days; however, I have been wearing it for the past hour without any weight/tension, but will hang some weight from it later and see what happens.
 
Mine arrived today...
In the previous pages there was a lot of talk about drilling the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] and stuff... I came up with a mod which consists of 7 parts
1 - 3mm x 25mm screw
3 - 3.2mm(inner diameter) 9mm(outer - effective - diamter) washer
3 - 3mm bolt

All the parts as well as the assembly can be viewed by clicking the picture links bellow...



It works like a charm :blush:
 
It's been around 2 weeks now since I started using the [words=http://TLCTugger.com/MOS]tugger[/words]. I am so glad I found this thread. I started stretching at 7 inches, and am now up to 7.5" comfortably for ~5-6 hours a day (1 hour at a time). At the end of each hour, I can get another 1/4" bar on making the total stretch at 7 3/4". This is all in 2 weeks. Everyone has got to give this a try. Best thing ever!
 
Faber;454786 said:
Mine arrived today...
In the previous pages there was a lot of talk about drilling the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] and stuff... I came up with a mod which consists of 7 parts
1 - 3mm x 25mm screw
3 - 3.2mm(inner diameter) 9mm(outer - effective - diamter) washer
3 - 3mm bolt

All the parts as well as the assembly can be viewed by clicking the picture links bellow...



It works like a charm :blush:


See, that was not so bad:)
 
Getting hard is okay in this setup.It actually improves circulation while you are stretching and is a good thing!Getting hard was impossible before the [words=http://TLCTugger.com/MOS]tugger[/words] setup cause the comfort strap would strangle my dick and the last thing that was going to happen was to get hard.
Gravik;454746 said:
Also, how do you guys prevent getting hard while putting this on???

I got it on successfully once but had an 85% boner. :(
 
Getting hard should not cause any issues, you may need to tighten up after but nothing more.
 
This thing is honestly starting to piss me off :(

Five seconds after the [words=http://TLCTugger.com/MOS]vlc[/words] touches my dick I start to get hard. How are you supposed to get a good stretch with a boner???

Skin cone is definitely too small, as I don't feel like I can get enough skin under the cone. The cone doesn't seem near as loose as in the demonstration video.

Ugh. I hope I'm not going to be one of the unlucky few who it doesn't work for.
 
Jerk off then before you put it on Gravik.
If the skin cone is too tight ask Ron for a bigger one .
Can u take some pics and show me the problem u are having and i will try to help you.

Don't get pissed off that won't get ur dick any bigger.
Some of these Penis Enlargement tools have a learning curve.

Did you give Ron your measurements when you first ordered the skin cone?
Gravik;455020 said:
This thing is honestly starting to piss me off :(

Five seconds after the [words=http://TLCTugger.com/MOS]vlc[/words] touches my dick I start to get hard. How are you supposed to get a good stretch with a boner???

Skin cone is definitely too small, as I don't feel like I can get enough skin under the cone. The cone doesn't seem near as loose as in the demonstration video.

Ugh. I hope I'm not going to be one of the unlucky few who it doesn't work for.
 
@ Gravik. Also try to a few manual stretches(4) before putting the [words=http://TLCTugger.com/MOS]VLC[/words] on. This will Pre-stretch your penil-tissues and will put your mind more at ease.
If you still get hard before attaching the device, do some thing non-pe and try again after some minutes. Hope this breaks the ice.
 
how does this work? how.do.you put the tuuger on your penis? also what is the [words=http://TLCTugger.com/MOS]vlc[/words] skin cones? im so confuse. because im cut and im curious how or what type to put on. i cant keep the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]size genetics[/words] on longer than 45 minutes which is annoying.

help please
 
Karmi read this entire thread and then ask if you have questions.
karmi;455084 said:
how does this work? how.do.you put the tuuger on your penis? also what is the [words=http://TLCTugger.com/MOS]vlc[/words] skin cones? im so confuse. because im cut and im curious how or what type to put on. i cant keep the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]size genetics[/words] on longer than 45 minutes which is annoying.

help please
 
ok does this in any way effect guys who are cut? it doesnt make them get permanent skin as if they was not cut right? i think i understand how it works.

how do you know what [words=http://TLCTugger.com/MOS]vlc[/words] [words=http://TLCTugger.com/MOS]tugger[/words] to get because thete are a few
 
Back
Top