Size Genetics Extender with the VLC Tugger with DISCOUNT!!!
- Thread starter Super
- Start date
-
- Tags
- 7 inches 8 inch 8 inches 9 inches ads autoextender average ball skin base girth bathmate behind the cheeks big girth circulation cock ring cum discoloration dld blasters doublelongdaddy effective eight elongation equipment erect erectile erection erection quality erections erotic stories exercise exercises extender extenders extending extreme flaccid foreskin gain gaining gains genetics girth gains glans growing growth hands hanging huge cock ide impotence inner penis jelq jelqs jes-extender larger length gains load loads massive massive cock masturbate nerve damage p.e painful penis penis extender penis stretching peyronies phallosan phalosan posts progress pump pumping pussy question recovery research results review routine sensations sensitivity sex short shower size size genetics size genetics penis extender sizegenetics sizegenetics answers sizegenetics opinions sizegenetics questions sizegenetics results sizegenetics support skin sleeve sleeves small penis stories stretch stretched stretcher stretching stretchy suction supplement support surgery tender tension thick tissue growth tugging uncircumcised vacuum viagra wide workout wrap
good one man
start to grow a monster cock
start to grow a monster cock
JohnSwindle;459483 said:
Hey Guys,
I've been using the [words=http://TLCTugger.com/MOS]VLC[/words] mod for my [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] for probably about 3 weeks now. I have no problem strecthing, don't have issues with slippage (except the very odd time) and everything seems good. This mod is way more comfortable than the noose or strap and even more comfortable than the Velcro mod.
I can see great gains come from the [words=http://TLCTugger.com/MOS]VLC[/words] and [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words]. I started with two large rods on each side and 1 small rod on each side, then removed the small rod on each side and added the medium rods on each side. I'm now up to two large rods, one medium rod and one small rod on each side.
The only issue I have it seems I can't go 4 to 6 hours like some are able to do. I have an issue where at about an hour I have to take the skin cone off because I feel some buring at my foreskin and it's actually small blisters because my foresking sticks to the skin cone. Some suggested to try baby powder but I think this suggestion is if your having slippage issues. I don't really have slippage issues, but decided to try baby powder. When applying baby powder to my foreskin ironically then I had slippage and could never get mounted on the [words=http://TLCTugger.com/MOS]VLC[/words] and skin cone.
Does anyone have suggestions to preventing the burning and blisters on my foreskin? I really want to use the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] for longer hours like most of you are doing and not have to take it off around every hour and take a break.
Thanks!
I've been using the [words=http://TLCTugger.com/MOS]VLC[/words] mod for my [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] for probably about 3 weeks now. I have no problem strecthing, don't have issues with slippage (except the very odd time) and everything seems good. This mod is way more comfortable than the noose or strap and even more comfortable than the Velcro mod.
I can see great gains come from the [words=http://TLCTugger.com/MOS]VLC[/words] and [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words]. I started with two large rods on each side and 1 small rod on each side, then removed the small rod on each side and added the medium rods on each side. I'm now up to two large rods, one medium rod and one small rod on each side.
The only issue I have it seems I can't go 4 to 6 hours like some are able to do. I have an issue where at about an hour I have to take the skin cone off because I feel some buring at my foreskin and it's actually small blisters because my foresking sticks to the skin cone. Some suggested to try baby powder but I think this suggestion is if your having slippage issues. I don't really have slippage issues, but decided to try baby powder. When applying baby powder to my foreskin ironically then I had slippage and could never get mounted on the [words=http://TLCTugger.com/MOS]VLC[/words] and skin cone.
Does anyone have suggestions to preventing the burning and blisters on my foreskin? I really want to use the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] for longer hours like most of you are doing and not have to take it off around every hour and take a break.
Thanks!
I am currently using the [words=http://TLCTugger.com/MOS]TLC[/words], and I get the same burning when I have too much tension.
btw I also have the [words=http://TLCTugger.com/MOS]VLC[/words] but can't use it yet, because I don't have enough foreskin. Maybe you don't have enough foreskin to stretch.
btw I also have the [words=http://TLCTugger.com/MOS]VLC[/words] but can't use it yet, because I don't have enough foreskin. Maybe you don't have enough foreskin to stretch.
1Sepp;459554 said:
Hey 1Sepp thanks for the response. I don't think not having too much foreskin is the issue because watching the videos and looking at the pics of the [words=http://TLCTugger.com/MOS]VLC[/words] mod I would say I have just as much foreskin as the guys in the pics and in the video. Even though I'm a cut guy I still can get a lot of foreskin around the [words=http://TLCTugger.com/MOS]VLC[/words], because when I'm flaccid I have a lot of loose skin!
I hope there is a way to prevent this burning and blistering on my foreskin because I really love the [words=http://TLCTugger.com/MOS]VLC[/words] mod and being able to wear it for 4 to 6 hours would bring faster and greater gains
The burning is normal.
It happens to me too.I take off the [words=http://TLCTugger.com/MOS]tugger[/words] ,massage my foreskin for a couple of minutes and put it back on.The burning is concentrated on the foreskin because thats where it attaches between the [words=http://TLCTugger.com/MOS]tugger[/words] and the skin cone.
Just get used to it ...it is alot less painful than the velcro mod,comfort strap or noose and is part of getting a bigger dick guys.
Man up -no pain here no gain!
It happens to me too.I take off the [words=http://TLCTugger.com/MOS]tugger[/words] ,massage my foreskin for a couple of minutes and put it back on.The burning is concentrated on the foreskin because thats where it attaches between the [words=http://TLCTugger.com/MOS]tugger[/words] and the skin cone.
Just get used to it ...it is alot less painful than the velcro mod,comfort strap or noose and is part of getting a bigger dick guys.
Man up -no pain here no gain!
countryboy;459556 said:Hey 1Sepp thanks for the response. I don't think not having too much foreskin is the issue because watching the videos and looking at the pics of the [words=http://TLCTugger.com/MOS]VLC[/words] mod I would say I have just as much foreskin as the guys in the pics and in the video. Even though I'm a cut guy I still can get a lot of foreskin around the [words=http://TLCTugger.com/MOS]VLC[/words], because when I'm flaccid I have a lot of loose skin!
I hope there is a way to prevent this burning and blistering on my foreskin because I really love the [words=http://TLCTugger.com/MOS]VLC[/words] mod and being able to wear it for 4 to 6 hours would bring faster and greater gains
countryboy;459556 said:Hey 1Sepp thanks for the response. I don't think not having too much foreskin is the issue because watching the videos and looking at the pics of the [words=http://TLCTugger.com/MOS]VLC[/words] mod I would say I have just as much foreskin as the guys in the pics and in the video. Even though I'm a cut guy I still can get a lot of foreskin around the [words=http://TLCTugger.com/MOS]VLC[/words], because when I'm flaccid I have a lot of loose skin!
I hope there is a way to prevent this burning and blistering on my foreskin because I really love the [words=http://TLCTugger.com/MOS]VLC[/words] mod and being able to wear it for 4 to 6 hours would bring faster and greater gains
@countryboy, you may have the same problem as myself, although i'm uncut, i have niggling problems, so far i have purchased 2 tuggers both give me different headaches!
my first [words=http://TLCTugger.com/MOS]tugger[/words] is sized with my flaccid state at 32mm this is the deep [words=http://TLCTugger.com/MOS]tugger[/words], the one with the same depth most folk will have, this one creases when any tension is applied all around the circumference, which in turn these crease dig into my foreskin...... causing discomfort very soon.
2nd [words=http://TLCTugger.com/MOS]tugger[/words] i order 32mm to match glans, this time i opted for the shallow style [words=http://TLCTugger.com/MOS]tugger[/words], this is much improved, but once [words=http://TLCTugger.com/MOS]tugger[/words] settles position on glans this leaves a gap on underside between glans and [words=http://TLCTugger.com/MOS]tugger[/words], so about an hour in to a set the pain kicks in because the gap created sucks in foreskin causing it to blister!
don't no why i'm having such a hard time getting one of these to fit correctly........i'm having another go ordered another [words=http://TLCTugger.com/MOS]tugger[/words] 28mm/deep style [words=http://TLCTugger.com/MOS]tugger[/words]. i think this will be better suited, the 32mm just does not go bak far enough to take in the thick part of glans, i think thats how its creasing.
currently i have been back using this setup with major discomfort for 5 weeks, i just know there must be a [words=http://TLCTugger.com/MOS]tugger[/words] that works for me!
Dickleaker thanks for your response! I can deal with the burning and you mentioned you are experiencing the same thing. Along with the burning that you experience are you also getting blisters? I'm not really concerned about the burning but I'm concerned about the blisters.
fonic thanks for the response as well! Like you, I really want to utilitze the [words=http://TLCTugger.com/MOS]VLC[/words] mod because I think it will have lots of poetential, but the blisters are becoming a concern. I properly warm up, and have even made sure my penis, [words=http://TLCTugger.com/MOS]tugger[/words] and skin cone were all freshly washed as suggested by Ron. You mentioned that so far you have purchased two different [words=http://TLCTugger.com/MOS]VLC[/words] tuggers and second one a 32mm to match your glans. I appologize but I'm a little confused lol When I went to Ron's website I only noticed one [words=http://TLCTugger.com/MOS]VLC[/words] [words=http://TLCTugger.com/MOS]Tugger[/words] (with a SKU# [words=http://TLCTugger.com/MOS]VLC[/words]) which everyone on [words=http://www.mattersofsize.com/join-now.html]MOS[/words] is buying. I never noticed any mm measurements to go with the [words=http://TLCTugger.com/MOS]VLC[/words] [words=http://TLCTugger.com/MOS]tugger[/words]. The only measurements I noticed were with the skin cones having an mm attached to it.
Do you have a link to this [words=http://TLCTugger.com/MOS]VLC[/words] [words=http://TLCTugger.com/MOS]Tugger[/words] 28mm/ deep style [words=http://TLCTugger.com/MOS]tugger[/words] because I might be interested?
Thanks a lot guys! I want to succeed in the Penis Enlargement world, and I appreciate your help!
fonic thanks for the response as well! Like you, I really want to utilitze the [words=http://TLCTugger.com/MOS]VLC[/words] mod because I think it will have lots of poetential, but the blisters are becoming a concern. I properly warm up, and have even made sure my penis, [words=http://TLCTugger.com/MOS]tugger[/words] and skin cone were all freshly washed as suggested by Ron. You mentioned that so far you have purchased two different [words=http://TLCTugger.com/MOS]VLC[/words] tuggers and second one a 32mm to match your glans. I appologize but I'm a little confused lol When I went to Ron's website I only noticed one [words=http://TLCTugger.com/MOS]VLC[/words] [words=http://TLCTugger.com/MOS]Tugger[/words] (with a SKU# [words=http://TLCTugger.com/MOS]VLC[/words]) which everyone on [words=http://www.mattersofsize.com/join-now.html]MOS[/words] is buying. I never noticed any mm measurements to go with the [words=http://TLCTugger.com/MOS]VLC[/words] [words=http://TLCTugger.com/MOS]tugger[/words]. The only measurements I noticed were with the skin cones having an mm attached to it.
Do you have a link to this [words=http://TLCTugger.com/MOS]VLC[/words] [words=http://TLCTugger.com/MOS]Tugger[/words] 28mm/ deep style [words=http://TLCTugger.com/MOS]tugger[/words] because I might be interested?
Thanks a lot guys! I want to succeed in the Penis Enlargement world, and I appreciate your help!
countryboy...i feel your pain brother, its not the easiest site to navigate or get what you want, the blisters aren't fun...agreed on that..ive been pushing myself through it self medicating with some tasty vaporising hehe
i'm thinking you must have skin suck into the [words=http://TLCTugger.com/MOS]tugger[/words] also, which means your [words=http://TLCTugger.com/MOS]tugger[/words] can't be the right fit, i have had plenty dialogue with ron abt my problems, but its hard for someone to understand whats actually wrong
unless they see it for themselves, although my glans is 32mm width flaccid state which is what I've been asked for when ordering, the [words=http://TLCTugger.com/MOS]tugger[/words] doesn't go back that far to utilise this width...hence creases because of gaps when tension applied,
i don't have a link buddy, i just place an order, then a follow up e-mail with that size i want, i'm hoping with this new size it will fit snuggly, leaving no gaps and room for skin to be sucked in..........who knows third time lucky maybe.
i'm thinking you must have skin suck into the [words=http://TLCTugger.com/MOS]tugger[/words] also, which means your [words=http://TLCTugger.com/MOS]tugger[/words] can't be the right fit, i have had plenty dialogue with ron abt my problems, but its hard for someone to understand whats actually wrong
unless they see it for themselves, although my glans is 32mm width flaccid state which is what I've been asked for when ordering, the [words=http://TLCTugger.com/MOS]tugger[/words] doesn't go back that far to utilise this width...hence creases because of gaps when tension applied,
i don't have a link buddy, i just place an order, then a follow up e-mail with that size i want, i'm hoping with this new size it will fit snuggly, leaving no gaps and room for skin to be sucked in..........who knows third time lucky maybe.
Are you talking about the Your Skin cone that comes in different sizes? I think there's only one [words=http://TLCTugger.com/MOS]VLC[/words] size at the moment.
Anyways, I"m having the same problem. I'm cut relatively tight and I get the same burning feeling on my skin after a while
Anyways, I"m having the same problem. I'm cut relatively tight and I get the same burning feeling on my skin after a while
SirKyle;459617 said:Are you talking about the Your Skin cone that comes in different sizes? I think there's only one [words=http://TLCTugger.com/MOS]VLC[/words] size at the moment.
Anyways, I"m having the same problem. I'm cut relatively tight and I get the same burning feeling on my skin after a while
i'm talking about the [words=http://TLCTugger.com/MOS]vlc[/words] [words=http://TLCTugger.com/MOS]tugger[/words], i gave a specific size at weekend, i never asked for cone, i thought everything was custom made to your size, not a bog standard [words=http://TLCTugger.com/MOS]vlc[/words].....so confused now.
they have sent it out and nothing was mentioned about the size i asked for, so i presume i'm getting what i asked for...........or am i
aren't you ordering two parts? The [words=http://TLCTugger.com/MOS]VLC[/words] aka the white solid thing and a silicone cone that comes on top of it (most of us have it in transparent but Ron also sells it in white) - that cone can be bought in different sizes and comes quite cheap.
The [words=http://TLCTugger.com/MOS]tugger[/words] itself, I don't think so - for now at least. Am I wrong?
The [words=http://TLCTugger.com/MOS]tugger[/words] itself, I don't think so - for now at least. Am I wrong?
no just ordered [words=http://TLCTugger.com/MOS]tugger[/words], only gave a size that matches the width of the [words=http://TLCTugger.com/MOS]vlc[/words] [words=http://TLCTugger.com/MOS]tugger[/words] opening that i want, this will be my third [words=http://TLCTugger.com/MOS]tugger[/words] order.
i'm hoping he wouldn't send out the same thing i already got.....considering the chats i have had to ron about this and my problems relating to this matter.
having said that....no doubt i have the wrong end of the stick here and i will get sent same thing.
i'm hoping he wouldn't send out the same thing i already got.....considering the chats i have had to ron about this and my problems relating to this matter.
having said that....no doubt i have the wrong end of the stick here and i will get sent same thing.
CB,
I get a small ring of raised skin on my foreskin...is that what you mean by blister?
Once I take off the [words=http://TLCTugger.com/MOS]tugger[/words] and massage my dick for a couple of minutes it goes away.
Dickleaker thanks for your response! I can deal with the burning and you mentioned you are experiencing the same thing. Along with the burning that you experience are you also getting blisters? I'm not really concerned about the burning but I'm concerned about the blisters.
I get a small ring of raised skin on my foreskin...is that what you mean by blister?
Once I take off the [words=http://TLCTugger.com/MOS]tugger[/words] and massage my dick for a couple of minutes it goes away.
Dickleaker thanks for your response! I can deal with the burning and you mentioned you are experiencing the same thing. Along with the burning that you experience are you also getting blisters? I'm not really concerned about the burning but I'm concerned about the blisters.
SirKyle,
Its normal to get the burning feeling on the skin cause thats what's trapped between the [words=http://TLCTugger.com/MOS]tugger[/words] and skin cone to create the seal.
Like I said I take it off every hour and massage my foreskin for a few minutes and then I'm ready to go again.
It is way less painful than the comfort strap or velcro mod cause it doesn't cut off your circulation!
good luck with it and your gains!
Its normal to get the burning feeling on the skin cause thats what's trapped between the [words=http://TLCTugger.com/MOS]tugger[/words] and skin cone to create the seal.
Like I said I take it off every hour and massage my foreskin for a few minutes and then I'm ready to go again.
It is way less painful than the comfort strap or velcro mod cause it doesn't cut off your circulation!
good luck with it and your gains!
SirKyle;459617 said:Are you talking about the Your Skin cone that comes in different sizes? I think there's only one [words=http://TLCTugger.com/MOS]VLC[/words] size at the moment.
Anyways, I"m having the same problem. I'm cut relatively tight and I get the same burning feeling on my skin after a while
Fonic,
Like SirKyle said,there are 2 pieces that come with the [words=http://TLCTugger.com/MOS]VLC[/words] [words=http://TLCTugger.com/MOS]tugger[/words] or the [words=http://TLCTugger.com/MOS]TLC[/words] [words=http://TLCTugger.com/MOS]tugger[/words].
One is the [words=http://TLCTugger.com/MOS]tugger[/words] itself and the then the outer rubbery skin cone that fits over your foreskin once its pulled over the [words=http://TLCTugger.com/MOS]tugger[/words] .
Nice on the vapour dude!
Like SirKyle said,there are 2 pieces that come with the [words=http://TLCTugger.com/MOS]VLC[/words] [words=http://TLCTugger.com/MOS]tugger[/words] or the [words=http://TLCTugger.com/MOS]TLC[/words] [words=http://TLCTugger.com/MOS]tugger[/words].
One is the [words=http://TLCTugger.com/MOS]tugger[/words] itself and the then the outer rubbery skin cone that fits over your foreskin once its pulled over the [words=http://TLCTugger.com/MOS]tugger[/words] .
Nice on the vapour dude!
fonic;459636 said:
Dickleaker;459646 said:Fonic,
Like SirKyle said,there are 2 pieces that come with the [words=http://TLCTugger.com/MOS]VLC[/words] [words=http://TLCTugger.com/MOS]tugger[/words] or the [words=http://TLCTugger.com/MOS]TLC[/words] [words=http://TLCTugger.com/MOS]tugger[/words].
One is the [words=http://TLCTugger.com/MOS]tugger[/words] itself and the then the outer rubbery skin cone that fits over your foreskin once its pulled over the [words=http://TLCTugger.com/MOS]tugger[/words] .
Nice on the vapour dude!
full melt bubble vape mmmm -\^(-_-)^/-
well i will let y'all know what arrives this time..........................coz i'm TOTALLYCONFUSED.COM
Well I'm tugging and I think I'm doing it right. I have attached the [words=http://TLCTugger.com/MOS]VLC[/words] to the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] with some shoe string for now. Thanks DL for mentioning the ring around the foreskin, i was worried about this.
Does the skin have to be even around the [words=http://TLCTugger.com/MOS]VLC[/words] or is all that matters is that you get a good suction?
Does the skin have to be even around the [words=http://TLCTugger.com/MOS]VLC[/words] or is all that matters is that you get a good suction?
Tried to email you at that address and all I got was smoke!
fonic;459650 said:
Hey JohnSwindle,
If you are getting good suction and a good pull/stretch with your [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] then you will gain man.
The blister/ring on the foreskin gets less and less as your dick gets used to this thing.Hang in there my man!
If you are getting good suction and a good pull/stretch with your [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] then you will gain man.
The blister/ring on the foreskin gets less and less as your dick gets used to this thing.Hang in there my man!
JohnSwindle;459657 said:
The shoe string is a bad way to attach the [words=http://TLCTugger.com/MOS]VLC[/words], I can't get enough tension.. I'm going to have to go to the hardware store to rig something up..
I still get a lot of slippage.. I'll get some baby powder tomorrow, but it's my first night with I probably have to play with it more
You can see right away though how the glans gets more shiny and healthy looking though
I still get a lot of slippage.. I'll get some baby powder tomorrow, but it's my first night with I probably have to play with it more
You can see right away though how the glans gets more shiny and healthy looking though
Hi, I'm starting to get motivated to wear the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] with the [words=http://TLCTugger.com/MOS]VLC[/words] daily. I didn't really wear it because I would get this stinging pain after 2 minutes from the foreskin being bunched up in the skin cone, so that put me off wearing it. Recently I watched supras video series and saw that he brings his foreskin to a certain point on the [words=http://TLCTugger.com/MOS]VLC[/words] and puts on the skin cone.
The second video really clued me in because I saw why I was having pain. The reason is that I was bunching too much skin that was being trapped in the cone. You don't have to roll up your foreskin that high on the [words=http://TLCTugger.com/MOS]VLC[/words], just so that it almost touches the area that supra said to go to, maybe even less. If you have a lot of foreskin bunched up and wrinkled, it's going to cause pain.
I'm taking it very slow, I'm only using 2 big bars on each side with no tension at all. I still can't wear it for extended periods of time with that annoying burning sensation on the foreskin but it's not nearly as bad as before. I'm guessing it will go away though when I get used to it because I only wore it for a little and it feels the pain is becoming less and less. Has anyone else felt this, does it go away after you wear the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] and [words=http://TLCTugger.com/MOS]VLC[/words] a lot? Thanks supra for the video series which really helped me and gave me a visual.
The second video really clued me in because I saw why I was having pain. The reason is that I was bunching too much skin that was being trapped in the cone. You don't have to roll up your foreskin that high on the [words=http://TLCTugger.com/MOS]VLC[/words], just so that it almost touches the area that supra said to go to, maybe even less. If you have a lot of foreskin bunched up and wrinkled, it's going to cause pain.
I'm taking it very slow, I'm only using 2 big bars on each side with no tension at all. I still can't wear it for extended periods of time with that annoying burning sensation on the foreskin but it's not nearly as bad as before. I'm guessing it will go away though when I get used to it because I only wore it for a little and it feels the pain is becoming less and less. Has anyone else felt this, does it go away after you wear the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] and [words=http://TLCTugger.com/MOS]VLC[/words] a lot? Thanks supra for the video series which really helped me and gave me a visual.
Last edited:
Hi all! This mod seems quite interesting and I've been following this thread for awhile. Before trying this myself I'd like to know if anyone has had issues with turkey neck from using the [words=http://TLCTugger.com/MOS]VLC[/words] [words=http://TLCTugger.com/MOS]Tugger[/words]. In the videos it really looks like the skin from around the base is pulled up a lot; Does this then happen with your new erect length, or are you also growing new skin along the shaft?
Hey guys,
I think I may have found out why I'm getting the burning and blistering issue using the [words=http://TLCTugger.com/MOS]VLC[/words] with the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words]. I think I may have added rods too fast as it took an extreme amount of force each time to mount the [words=http://TLCTugger.com/MOS]VLC[/words] on the modified head piece.
I'll give you a little run down first. About 3 weeks ago when I really started using the [words=http://TLCTugger.com/MOS]VLC[/words] mod I started with 2 big rods on each end. At first it was at a maximum tension of 1500g but as time went by it would go to 1200g then eventually 900g. Rather than use the screws on each side to increase tension I decided to add 1 small rod on each side. I followed the same thing it started at 1500g and as time progressed eventually went to 900g and once again rather than using the screws to increase tension i just removed the two small rods on each side and replaced them with a medium rod on each side.
Once again followed the same method as before but this time rather than waiting for it to go to 900g, I decided to add a small rod to each side when I hit the 1200g mark. And keep in mind once again when I hit the 1200g I didn't bother using the screws on each side to increase tension.
This is when I really started noticing the burning and blisters and I was at two large rods, one medium rod and one small rod on each side. With this setup I really had to pull on my penis extremely hard just to get it mounted on the modified head piece for the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words], I never had this issue before I was able to mount with some effort needed before this but it didn't take an extreme amount of effort like my current setup did.
I decided to remove one small rod on each side yesterday, so my current setup now is two large rods on each side and one medium rod on each side. To mount the [words=http://TLCTugger.com/MOS]VLC[/words] onto the modified head pice of the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] took some effort but it was nothing like before I removed a small rod on each side it took a lot of effort to get the [words=http://TLCTugger.com/MOS]VLC[/words] mounted on the modified head pice.
1) Could the burning and blistering of been caused by adding the small rod on each side too fast?
2) When I'm in the [words=http://TLCTugger.com/MOS]VLC[/words] with the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] should I use the screws to increase the tension, so if it goes from 1500g to 1200g should I use the screws to bring the tension back to 1500g?
3) When is the proper time to use the screws to increase tension, once it goes from 1500g to 1200g or do you wait until it gets to 900g?
4) I explained how I use to add rods wait for the tension to go from 1500g to 900g and I never used the tension screws to increase tension. When is the proper time to add rods using my method or when the tension screws on each side can't be turned anymore leaving the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] at it's maxium length for your existing setup?
Thanks!
I think I may have found out why I'm getting the burning and blistering issue using the [words=http://TLCTugger.com/MOS]VLC[/words] with the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words]. I think I may have added rods too fast as it took an extreme amount of force each time to mount the [words=http://TLCTugger.com/MOS]VLC[/words] on the modified head piece.
I'll give you a little run down first. About 3 weeks ago when I really started using the [words=http://TLCTugger.com/MOS]VLC[/words] mod I started with 2 big rods on each end. At first it was at a maximum tension of 1500g but as time went by it would go to 1200g then eventually 900g. Rather than use the screws on each side to increase tension I decided to add 1 small rod on each side. I followed the same thing it started at 1500g and as time progressed eventually went to 900g and once again rather than using the screws to increase tension i just removed the two small rods on each side and replaced them with a medium rod on each side.
Once again followed the same method as before but this time rather than waiting for it to go to 900g, I decided to add a small rod to each side when I hit the 1200g mark. And keep in mind once again when I hit the 1200g I didn't bother using the screws on each side to increase tension.
This is when I really started noticing the burning and blisters and I was at two large rods, one medium rod and one small rod on each side. With this setup I really had to pull on my penis extremely hard just to get it mounted on the modified head piece for the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words], I never had this issue before I was able to mount with some effort needed before this but it didn't take an extreme amount of effort like my current setup did.
I decided to remove one small rod on each side yesterday, so my current setup now is two large rods on each side and one medium rod on each side. To mount the [words=http://TLCTugger.com/MOS]VLC[/words] onto the modified head pice of the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] took some effort but it was nothing like before I removed a small rod on each side it took a lot of effort to get the [words=http://TLCTugger.com/MOS]VLC[/words] mounted on the modified head pice.
1) Could the burning and blistering of been caused by adding the small rod on each side too fast?
2) When I'm in the [words=http://TLCTugger.com/MOS]VLC[/words] with the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] should I use the screws to increase the tension, so if it goes from 1500g to 1200g should I use the screws to bring the tension back to 1500g?
3) When is the proper time to use the screws to increase tension, once it goes from 1500g to 1200g or do you wait until it gets to 900g?
4) I explained how I use to add rods wait for the tension to go from 1500g to 900g and I never used the tension screws to increase tension. When is the proper time to add rods using my method or when the tension screws on each side can't be turned anymore leaving the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] at it's maxium length for your existing setup?
Thanks!
Just to let you guys know...I have stretched the hell out of my skin cone-I think it is the RC10 from using it for 6 hours every day for 2 months.
When I first got it was perfect fit over my foreskin...now it is stretched and keeps slipping off so tonight I ordered a couple of more...the RC8 and another RC10.
If you are new at this and thinking about ordering you may want to order an extra one for the future.
When I first got it was perfect fit over my foreskin...now it is stretched and keeps slipping off so tonight I ordered a couple of more...the RC8 and another RC10.
If you are new at this and thinking about ordering you may want to order an extra one for the future.
countryboy, that's exactly what I found out yesterday! Two big bars on each side even without tension gives me the burning pain.
Now I only use 1 big bar and a medium on each side which is the minimal stretch for me. I'm going to wait until I can wear it for long periods of time without any discomfort. Then I'll sneak up the tension, once I get used to full tension
I'm going to add the small bars at 0 tension and repeat the process. I also tried the regular strapping/noose method again, after trying it I'm never going back to it because it's a big hassle compared to the [words=http://TLCTugger.com/MOS]VLC[/words] method and painful as well.
I was skeptical at first but I really learned to appreciate the [words=http://TLCTugger.com/MOS]VLC[/words] and [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words], it's making me finally log in some hours and making the glans healthy at the same time. Didn't know the skin cone stretches like that leaker, glad I got a 3-pack of the RC14 cone. Even though it's going to take me a while to add all the bars and tension, I would love to have an extra set of big bars in reserve.
Now I only use 1 big bar and a medium on each side which is the minimal stretch for me. I'm going to wait until I can wear it for long periods of time without any discomfort. Then I'll sneak up the tension, once I get used to full tension
I'm going to add the small bars at 0 tension and repeat the process. I also tried the regular strapping/noose method again, after trying it I'm never going back to it because it's a big hassle compared to the [words=http://TLCTugger.com/MOS]VLC[/words] method and painful as well.
I was skeptical at first but I really learned to appreciate the [words=http://TLCTugger.com/MOS]VLC[/words] and [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words], it's making me finally log in some hours and making the glans healthy at the same time. Didn't know the skin cone stretches like that leaker, glad I got a 3-pack of the RC14 cone. Even though it's going to take me a while to add all the bars and tension, I would love to have an extra set of big bars in reserve.
Last edited:
Guys it's better to take it slow and not risk injury which will stop you exercising full stop. With the [words=http://TLCTugger.com/MOS]vlc[/words] the temptation is to add bars quickly - you must take it slowly - it shouldn't take a massive effort to connect the [words=http://TLCTugger.com/MOS]vlc[/words] to the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]sg[/words] head piece. Better to go slow and not risk blisters etc - it will probably cement gains by going slower too.
Truant
Sounds good...like Supra said its better to log in the hours then have pain and get demotivated and stop.
Its the hours logged that will get you more gains...higher tension just gets them a little faster.
Get some extra big bars from autoextender.They are cheaper then [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words]'s and much cheaper for shipping.
The skin cone loses its strength over time same way an elastic loses its strength if constantly stretched out at its max length.
I have been stretching at max tension and this week my skin cone showed that it lost its grip cause of that.
Good luck and stay at it!
Sounds good...like Supra said its better to log in the hours then have pain and get demotivated and stop.
Its the hours logged that will get you more gains...higher tension just gets them a little faster.
Get some extra big bars from autoextender.They are cheaper then [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words]'s and much cheaper for shipping.
The skin cone loses its strength over time same way an elastic loses its strength if constantly stretched out at its max length.
I have been stretching at max tension and this week my skin cone showed that it lost its grip cause of that.
Good luck and stay at it!
truant;459923 said:
doublelongdaddy;460006 said:
That's great to hear, DLD. It really is a fantastic little product but I was pretty bummed out when you were getting Ron a bunch of advertisement and purchases without anything in return... I'm glad this worked out for both parties, should be a successful venture for both of ya!
hi everyone my [words=http://TLCTugger.com/MOS]vlc[/words] arrived yesterday and before i start was hoping someone could give me a bit of advice i regard myself tightly cut. in the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] i can stretch to just under 9in can someone advise what approx i should be stretching to with the [words=http://TLCTugger.com/MOS]vlc[/words] on thanks to anyone who replys
Glad you worked something out with Ron
Leaker, thanks for the tip, I heard the bars from auto [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] aren't the same as the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] ones. I heard they work but are hard to screw in, is this true? Have you tried them with the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words]? Thanks
My experience has been the burning sensation is caused by pull on the skin in between the two cones.
When I feel the burning sensation I remove the tension and find the burning sensation subsides in a short period of time. Once it subsides I can hook up the tension again. I don't have to remove the [words=http://TLCTugger.com/MOS]VLC[/words], just let the tension off.
For the past 2 to 3 weeks I've only been using the day strap which Ron sells. I feel like I'm getting some results in girth and erection quality but won't measure for a few more weeks. I want to use it regularly for about 2 months before I measure. The strap is much more convenient because it's not nearly as bulky as the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] and it's much easier to conceal in my jeans. One issue is when you sit down the tension drops because the strap doesn't have as much tension as when standing. I usually adjust the positioning of the strap to get more tension, then readjust when I stand back up.
When I wrap the strap around my leg (under the knee) I make sure the safety pin is below the strap that wraps around. When I need more tension when sitting I just pull the strap connected to the [words=http://TLCTugger.com/MOS]tugger[/words] downward and the part of the strap that wraps around the leg has enough tension to keep it there.
I make it a point to wear it for a minimum of 4 hours a day and have worn it for up to 8 to 10 hours on some days. My goal is to consistently wear it for 12 hours a day.
Another thing I noticed about the burning. It appears the more skin I can get on the cone the longer I can wear it before I feel any burning sensation. I've had sessions of 4 hours without any discomfort and only took it off after 4 hours because I had to piss.
I've used the night strap a few times and find after a few hours I wake up from the burning sensation and just undo the clip connecting the strap to the [words=http://TLCTugger.com/MOS]VLC[/words].
I think having any tension over a long period of time will cause the body to adapt. I'd rather keep it under lighter tension for a long period rather than having it under higher tension and having to fuss with adjusting it frequently. Higher tension will cause faster adaptation but the trade off is discomfort in a shorter period of time. Tortoise and the hare concept - slow and steady.
When I feel the burning sensation I remove the tension and find the burning sensation subsides in a short period of time. Once it subsides I can hook up the tension again. I don't have to remove the [words=http://TLCTugger.com/MOS]VLC[/words], just let the tension off.
For the past 2 to 3 weeks I've only been using the day strap which Ron sells. I feel like I'm getting some results in girth and erection quality but won't measure for a few more weeks. I want to use it regularly for about 2 months before I measure. The strap is much more convenient because it's not nearly as bulky as the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] and it's much easier to conceal in my jeans. One issue is when you sit down the tension drops because the strap doesn't have as much tension as when standing. I usually adjust the positioning of the strap to get more tension, then readjust when I stand back up.
When I wrap the strap around my leg (under the knee) I make sure the safety pin is below the strap that wraps around. When I need more tension when sitting I just pull the strap connected to the [words=http://TLCTugger.com/MOS]tugger[/words] downward and the part of the strap that wraps around the leg has enough tension to keep it there.
I make it a point to wear it for a minimum of 4 hours a day and have worn it for up to 8 to 10 hours on some days. My goal is to consistently wear it for 12 hours a day.
Another thing I noticed about the burning. It appears the more skin I can get on the cone the longer I can wear it before I feel any burning sensation. I've had sessions of 4 hours without any discomfort and only took it off after 4 hours because I had to piss.
I've used the night strap a few times and find after a few hours I wake up from the burning sensation and just undo the clip connecting the strap to the [words=http://TLCTugger.com/MOS]VLC[/words].
I think having any tension over a long period of time will cause the body to adapt. I'd rather keep it under lighter tension for a long period rather than having it under higher tension and having to fuss with adjusting it frequently. Higher tension will cause faster adaptation but the trade off is discomfort in a shorter period of time. Tortoise and the hare concept - slow and steady.
Last edited:
After reading this thread I was wondering if there was a way to measure the actual tension in the day strap. My search brought me to an interesting site.
http://apollotechonline.com/index.php?cPath=48&osCsid=fjzoymfttvjqfx
It's a company geared toward foreskin restoration. They actually have a tension scale. Although it goes up to 8 lbs. I wonder if there is a scale that's smaller in size and only goes up to a few pounds. The [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] has increments of 900gram, 1200 gram and 1500 gram. Those translate into : 900 grams = 1.98 lbs; 1200 grams = 2.64 lbs; 1500 grams = 3.3 lbs.
Maybe I'll send Ron and email with the suggestion of putting a tension scale in line with his day and night straps so the tension can be monitored and adjustments can be made to achieve the tension someone wants.
http://apollotechonline.com/index.php?cPath=48&osCsid=fjzoymfttvjqfx
It's a company geared toward foreskin restoration. They actually have a tension scale. Although it goes up to 8 lbs. I wonder if there is a scale that's smaller in size and only goes up to a few pounds. The [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] has increments of 900gram, 1200 gram and 1500 gram. Those translate into : 900 grams = 1.98 lbs; 1200 grams = 2.64 lbs; 1500 grams = 3.3 lbs.
Maybe I'll send Ron and email with the suggestion of putting a tension scale in line with his day and night straps so the tension can be monitored and adjustments can be made to achieve the tension someone wants.
Truant I'm happy you are starting to find your comfort zone with the [words=http://TLCTugger.com/MOS]VLC[/words]. After removing the small rod on each side I was able to stay in the [words=http://TLCTugger.com/MOS]VLC[/words] last night for over 2 hours with no burning of the foreskin or blisters. Only burning I felt was at the base (ligs) and along the shaft but this is normal as the penis is slowly being stretched to its new size.
It's true what the members are saying take Penis Enlargement slow. It's tempting to add rods as quick as you can with the [words=http://TLCTugger.com/MOS]VLC[/words] mod, but that's where my problems started to arise with burning and blistering. As stated before I really had to pull for the [words=http://TLCTugger.com/MOS]VLC[/words] mod to attach it to the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] modified head piece. Simply by removing one small rod on each side things were back to normal and was able to use the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] with very little discomfort! I guess being in Penis Enlargement for a little while I should of realized that Penis Enlargement is a marathon and not a 100 metre dash.
I'm taking the [words=http://TLCTugger.com/MOS]VLC[/words] slow from now on increasing tension as needed with the tension screws and slowly add rods as time progresses with the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words].
It's true what the members are saying take Penis Enlargement slow. It's tempting to add rods as quick as you can with the [words=http://TLCTugger.com/MOS]VLC[/words] mod, but that's where my problems started to arise with burning and blistering. As stated before I really had to pull for the [words=http://TLCTugger.com/MOS]VLC[/words] mod to attach it to the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] modified head piece. Simply by removing one small rod on each side things were back to normal and was able to use the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] with very little discomfort! I guess being in Penis Enlargement for a little while I should of realized that Penis Enlargement is a marathon and not a 100 metre dash.
I'm taking the [words=http://TLCTugger.com/MOS]VLC[/words] slow from now on increasing tension as needed with the tension screws and slowly add rods as time progresses with the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words].
I've solved the problem of losing tension when sitting down while using the day strap from Ron. Instead of running the day strap down the inside of the leg I've adjusted it to go over my leg to the outside of my knee. When I sit down, bending the knee puts tension back on the strap. If I need more tension I just move my leg to the outside until I get the tension I'm looking for.
The strap may move around on the top of your knee and can even slip off it. Just readjust it as needed. I'm working on how to get the strap to hold position on the knee.
Here's a drawing:
The strap may move around on the top of your knee and can even slip off it. Just readjust it as needed. I'm working on how to get the strap to hold position on the knee.
Here's a drawing:
Saintjohn,
Its going to depend on what point you attach the [words=http://TLCTugger.com/MOS]tugger[/words] and skin cone ...how much skin you can get in there .Whatever it is because your dick is attaching at a point further back on the headpiece of the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] you will probably add more bars than your regular setup.
When I first used this I was stretching only at 6 3/4" and now am at 8" .Before I used the [words=http://TLCTugger.com/MOS]tugger[/words] with my [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] I was stretching max at 7 1/2".
Don't know if that helps...just stretch out as much as you can...measure that as your new bencHydromaxark(it doesn't mean anything except as a new starting point for your future reference).
Then slowly increase the tension and add more bars over time.
Supra gained 3/4" EL in 4 months using this setup.
I have been at it for 2 months now 6 hours a day at high tension and love the [words=http://TLCTugger.com/MOS]tugger[/words] with the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words]...addicting for sure!
Log in as many hours as you can and when you can't be in the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] keep your dick in an extended state as per DLD's [words=http://www.mattersofsize.com/forum/showthread.php?64036-My-Best-Work-Ever-Penis-Enlargement-will-Be-Changed-Forever-gt-gt-Gain%20inches%20with%20SRT-Theory-and-Routine]SRT[/words] theory using the elastic strap from Ron's site or [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]Uncle Jim[/words]'s Wrap.
Good luck!
Its going to depend on what point you attach the [words=http://TLCTugger.com/MOS]tugger[/words] and skin cone ...how much skin you can get in there .Whatever it is because your dick is attaching at a point further back on the headpiece of the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] you will probably add more bars than your regular setup.
When I first used this I was stretching only at 6 3/4" and now am at 8" .Before I used the [words=http://TLCTugger.com/MOS]tugger[/words] with my [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] I was stretching max at 7 1/2".
Don't know if that helps...just stretch out as much as you can...measure that as your new bencHydromaxark(it doesn't mean anything except as a new starting point for your future reference).
Then slowly increase the tension and add more bars over time.
Supra gained 3/4" EL in 4 months using this setup.
I have been at it for 2 months now 6 hours a day at high tension and love the [words=http://TLCTugger.com/MOS]tugger[/words] with the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words]...addicting for sure!
Log in as many hours as you can and when you can't be in the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] keep your dick in an extended state as per DLD's [words=http://www.mattersofsize.com/forum/showthread.php?64036-My-Best-Work-Ever-Penis-Enlargement-will-Be-Changed-Forever-gt-gt-Gain%20inches%20with%20SRT-Theory-and-Routine]SRT[/words] theory using the elastic strap from Ron's site or [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]Uncle Jim[/words]'s Wrap.
Good luck!
saintjohn;460088 said:
dickleaker thanks for your reply i have been playing about with the [words=http://TLCTugger.com/MOS]vlc[/words] today and its been a bit of a pain with being tightly cut by the time i,ve attached the [words=http://TLCTugger.com/MOS]vlc[/words] to the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] the max length i get to is only just reaching 6 1/2 in well over 2in down on what i reach with the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] alone i can fell a burn when the [words=http://TLCTugger.com/MOS]vlc[/words] is attached but it seems to be coming from within maybe this is a good sign whats your opinion should i stick with it or return to [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] only thanks
Thanks leaker, they are way cheaper at auto [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words]! Supra you are a trooper for wearing the [words=http://TLCTugger.com/MOS]VLC[/words] with all the bars for long periods of time w/o frequent massage breaks, but I'm guessing you don't feel the burning feeling. After 3 days I'm slowly getting used to one big bar and a medium on each side with 0 tension.
I'm only getting a very light stretch at this stage, it's set up just enough so that it's barely extended.
Today as I'm typing this, it's been on for the longest time yet because I'm not feeling any burning sensation.
It feels as though it's not there, and so comfortable to the point I can even fall asleep with it on for a quick nap! This is exciting, also when I take it off I get raging eq which is such a cool bonus. I'm actually thrilled that this can make my glans healthy and restore a little foreskin. When I take off the [words=http://TLCTugger.com/MOS]VLC[/words] my skin stays in place like I'm uncut lol. I actually want a little extra foreskin for pleasure. I'm also going to do JAI stretches whenever I take it off to massage.
I'm only getting a very light stretch at this stage, it's set up just enough so that it's barely extended.
Today as I'm typing this, it's been on for the longest time yet because I'm not feeling any burning sensation.
It feels as though it's not there, and so comfortable to the point I can even fall asleep with it on for a quick nap! This is exciting, also when I take it off I get raging eq which is such a cool bonus. I'm actually thrilled that this can make my glans healthy and restore a little foreskin. When I take off the [words=http://TLCTugger.com/MOS]VLC[/words] my skin stays in place like I'm uncut lol. I actually want a little extra foreskin for pleasure. I'm also going to do JAI stretches whenever I take it off to massage.
Last edited:
I dont think I understand the tension on the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] yet..
Basically I attach the [words=http://TLCTugger.com/MOS]VLC[/words] and turn the screws (adding tension) until it is difficult to keep turning them.. anything wrong with this?
Basically I attach the [words=http://TLCTugger.com/MOS]VLC[/words] and turn the screws (adding tension) until it is difficult to keep turning them.. anything wrong with this?
another thing noticed is that the head of penis is somewhat cold after I tug (i've only been experimenting with the [words=http://TLCTugger.com/MOS]VLC[/words] for 10 minutes at a time since i havent gone to the hardware store)
I assume this isnt a good thing, but it isn't numb or anything
I assume this isnt a good thing, but it isn't numb or anything
I was just trying out the knee strap.. even with a light stretch, after 10-15 minutes, the head of my penis was rather cold and turning a bit purple.. whats going on here?
Am i possibly bundling up too much foreskin and choking the head of my penis? I can only seem to get the [words=http://TLCTugger.com/MOS]tugger[/words] to stay on if i roll my skin all the way up to the metal.. I'm cut but not tightly
Am i possibly bundling up too much foreskin and choking the head of my penis? I can only seem to get the [words=http://TLCTugger.com/MOS]tugger[/words] to stay on if i roll my skin all the way up to the metal.. I'm cut but not tightly
Last edited:
Saintjohn
Like I said don't be concerned about your measured stretch in this setup compared to before.The important measurement is going to be erect length now and when you decide to take your next one!
If you are feeling the burn means the penis tissue is micro tearing and then overnight your body is going to make more cells and your penis slowly gets bigger with this process.
You will also find that you will quickly increase your stretched out length from 6 1/2".
That is about where I started 2 months ago and I am stretching now to 8" in the [words=http://TLCTugger.com/MOS]tugger[/words]/SG.
Good luck to you
Like I said don't be concerned about your measured stretch in this setup compared to before.The important measurement is going to be erect length now and when you decide to take your next one!
If you are feeling the burn means the penis tissue is micro tearing and then overnight your body is going to make more cells and your penis slowly gets bigger with this process.
You will also find that you will quickly increase your stretched out length from 6 1/2".
That is about where I started 2 months ago and I am stretching now to 8" in the [words=http://TLCTugger.com/MOS]tugger[/words]/SG.
Good luck to you
saintjohn;460151 said: