Penimaster pro

MikeShlort;484917 said:
Hey tbone, I'm very glad to see that you are getting good results and that you are an active part of the forum, I remember when you started out not long ago. Good job man
Click to expand...


thanks!
 
I've tried using the extender that comes with the PMP, but I have to switch back to the x4 because of the larger base that they offer. I'm not that thick, but my base girth measurement is high because of turkey neck skin and my ligaments. The x4 base isn't perfect; I had to file down part of it with sandpaper because it was sharp, and it's slightly too big because sometimes a testicle will pop through the base when in the upward position, but it's still better than the bases from other companies. An in-between size would be perfect for me. The vacuum attachment is comfortable, but the base is so small that it makes the experience uncomfortable.

The affiliate program might make the company listen to our suggestions for improving the product. We should keep a list of suggestions. My main suggestion is the larger base (while keeping the other and giving people the choice), and also I think that having the glans chamber made of clear plastic would be an improvement.
 
Baba_Booey;484939 said:
The affiliate program might make the company listen to our suggestions for improving the product. We should keep a list of suggestions. My main suggestion is the larger base (while keeping the other and giving people the choice), and also I think that having the glans chamber made of clear plastic would be an improvement.
Click to expand...

I agree and I am sending them this thread now:)
 
fellas, good news to report tonite!

Earlier this afternoon I did 2 hours in the sg extender with the pmp, and used the v stretches in many variations. Also did a good warm up/warm down. It had been a few hours and I was wearing the divo suit. Long story short, I had a great erection and decided for shits and giggles to do a quick bone pressed measurement....I was over the 6.5 mark. Very stoked right now as getting over the 6 mark was taking forever. That's over a half inch of gain since March.

A special thanks goes to dickleaker. We both had the Bathmate, the sg with tlc, and now the pmp. His dedication is what kept me going when I thought it wasn't going to happen, so many thanks, DL!

tbone
 
Congratulations my man!!

However its you who did the work and kept the warrior mind to put in the time bro.You deserve the bigger cock...now how fun with it ;)
tbone77;484973 said:
fellas, good news to report tonite!

Earlier this afternoon I did 2 hours in the sg extender with the pmp, and used the v stretches in many variations. Also did a good warm up/warm down. It had been a few hours and I was wearing the divo suit. Long story short, I had a great erection and decided for shits and giggles to do a quick bone pressed measurement....I was over the 6.5 mark. Very stoked right now as getting over the 6 mark was taking forever. That's over a half inch of gain since March.

A special thanks goes to dickleaker. We both had the Bathmate, the sg with tlc, and now the pmp. His dedication is what kept me going when I thought it wasn't going to happen, so many thanks, DL!

tbone
Click to expand...
 
doublelongdaddy;484951 said:
I agree and I am sending them this thread now:)
Click to expand...

Ya, when you said there's a small market for a 6.5" base, I agreed DLD, but the only reason I used the figure 6.5" base is because that's what the X2 Labs extender base is. I believe the SG base is 5" or 5.5" right now, when I was pumping I could have gone for a 6" base. Basically something .5"-1" bigger in girth than the standard SG base would be ideal for people with larger girth, or people who are doing lots of girth work as well as length work. I found when pumping that my penis would be inflated for a good 20 hours after each session, and since I pumped each night, it stayed that size and then some. As of right now the standard SG base is good enough since I am focusing on length, but I think it may be beneficial for them to make a larger option if they are able to financially.
 
Dickleaker;484979 said:
Congratulations my man!!

However its you who did the work and kept the warrior mind to put in the time bro.You deserve the bigger cock...now how fun with it ;)
Click to expand...

WHen you say V-stretches, are you doing these stretches with the extender or manually with your hands?
 
Congrats tbone and good news for us all who are using the pmp! Regarding the divosuit, can you be more specific in how you use it? Do you put it on with the applicator? And if so how? Also, do you find that you also need to wear the divocup to get good traction? Sorry for all the questions but I would like to learn from your experience.
 
I've tried the divosuit but I didn't like how it squeezes your shaft. It seems like common knowledge, as well as the SRT theory as I understand it, that it's not good to suppress your size. It will keep your length longer than usual flaccid length, but the compression on the shaft felt uncomfortable for me and it felt like it might be counterproductive to gaining. The static wraps from static stretcher work much better at maintaining as longer-than-usual flaccid, but they seem to have gone out of business. It might be possible to get that static wrap material from another company and cut wraps out of it, but I don't know what that material is called.

Regarding the small PMP base: I have modified my base by filing it down from the inside and I increased the inside height to nearly 2 inches. I tried using a Dremel tool, but sandpaper worked better, it just took a long time. It's definitely more comfortable, but I'm still looking for a way to reduce the pain from the base pressing into the skin. If you wear an extender down or straight out, the pain will be where the base presses into the scrotum, and if you wear if upwards, the pain will be where the base presses into the top exit point. If you use an extender for multiple angles, you can change when to pain starts. I only stretch upwards so all I can do is point it down then back up and have it not press into the exact same spot and try different materials in between the base and my skin. I'm interested to hear from any of you that use something to reduce this pain from the base.
 
Baba_Booey;485119 said:
I've tried the divosuit but I didn't like how it squeezes your shaft. It seems like common knowledge, as well as the SRT theory as I understand it, that it's not good to suppress your size. It will keep your length longer than usual flaccid length, but the compression on the shaft felt uncomfortable for me and it felt like it might be counterproductive to gaining. The static wraps from static stretcher work much better at maintaining as longer-than-usual flaccid, but they seem to have gone out of business. It might be possible to get that static wrap material from another company and cut wraps out of it, but I don't know what that material is called.

Regarding the small PMP base: I have modified my base by filing it down from the inside and I increased the inside height to nearly 2 inches. I tried using a Dremel tool, but sandpaper worked better, it just took a long time. It's definitely more comfortable, but I'm still looking for a way to reduce the pain from the base pressing into the skin. If you wear an extender down or straight out, the pain will be where the base presses into the scrotum, and if you wear if upwards, the pain will be where the base presses into the top exit point. If you use an extender for multiple angles, you can change when to pain starts. I only stretch upwards so all I can do is point it down then back up and have it not press into the exact same spot and try different materials in between the base and my skin. I'm interested to hear from any of you that use something to reduce this pain from the base.
Click to expand...

Ya I was going to suggest the whether stripping but someone beat me to it. Sometimes I just take a piece of toilet paper and put it between the plastic base and my scrotum. However, the pain usually goes away by wearing it regularly and I don't have to worry about it. The only pain I get now is from my head being squeezed by the noose.

Also, about the divosuit, thank you for this info. I was going to order one to try it out but I have been told that compressing your penis is bad because it can lead to discoloration (iron deposits) that block the cells from repairing properly, or something like that. You'd have to ask a doctor/scientist for a proper explanation.
 
it looks like if you buy from the link, it comes with it's own extender...however, it will still work with your size genetics. if you just want the pmp kit with the head piece, then you want the upgrade kit 1, which is 235 US dollars. if you use the MOS discount thing....it's 335 US dollars, but then you get about 45 bucks in free extras....since you have the sg extender, I'd just get the upgrade kit, the hose attachment for easier application, and extra sluices....it still gonna be cheaper by about 50 bucks. considering you don't need a 2nd extender. either way, it's worth it....how much do you think more than a half inch of extra cock is worth? :) Seriously, bro, I wouldn't lead you astray if I didn't believe that this thing was the difference for me.
 
tbone77;485205 said:
it looks like if you buy from the link, it comes with it's own extender...however, it will still work with your size genetics. if you just want the pmp kit with the head piece, then you want the upgrade kit 1, which is 235 US dollars. if you use the MOS discount thing....it's 335 US dollars, but then you get about 45 bucks in free extras....since you have the sg extender, I'd just get the upgrade kit, the hose attachment for easier application, and extra sluices....it still gonna be cheaper by about 50 bucks. considering you don't need a 2nd extender. either way, it's worth it....how much do you think more than a half inch of extra cock is worth? :) Seriously, bro, I wouldn't lead you astray if I didn't believe that this thing was the difference for me.
Click to expand...

I'd value an extra half inch of cock at $15,000 per half inch.
 
tbone77;485205 said:
it looks like if you buy from the link, it comes with it's own extender...however, it will still work with your size genetics. if you just want the pmp kit with the head piece, then you want the upgrade kit 1, which is 235 US dollars. if you use the MOS discount thing....it's 335 US dollars, but then you get about 45 bucks in free extras....since you have the sg extender, I'd just get the upgrade kit, the hose attachment for easier application, and extra sluices....it still gonna be cheaper by about 50 bucks. considering you don't need a 2nd extender. either way, it's worth it....how much do you think more than a half inch of extra cock is worth? :) Seriously, bro, I wouldn't lead you astray if I didn't believe that this thing was the difference for me.
Click to expand...

Thanks by the way, I'm ordering it now. I've been using the noose for months so I'm sure I'll be much happier with this. Hopefully with the new head piece I won't have to add new bars to my extender.
 
i hated the noose.....the pmp will change the way you extend. i think you will be very happy with it.
 
I've noticed occasionally that when I remove the extender the top of my glans is not entirely in the glans chamber. It's not pulled back past the sluice ring, but it's in between the glans chamber and sluice.

I do the pump ball twice then pull on the chamber, which pulls out any shaft that was sucked in and positions the chamber right behind the glans. It's not anything wrong with the latex because it only happens sometimes. My guess is that it's from not having enough vacuum on those sets, but I can't consistently get the same amount of vacuum every time using the pump ball, and I can't always tell if it's enough or not. I can't get the hose to work, so I might have to modify my glans chamber to work with a hand pump.
 
You must log in or register to reply here.

Similar threads

O
  • Sticky
Equipment modification Modification to Bathmate HydroXtreme 7 with a pressure gauge
2
Replies
26
Views
1K
O
oldandlively
O
DLD
  • Sticky
SRT the worlds fastest way to a thick, long massive cock...penis enlargement
6 7 8
Replies
141
Views
40K
DLD
DLD
DLD
DLD
  • Sticky
Essential Creating the biggest penis ever! Penis Enlargement at its best
3 4 5
Replies
81
Views
19K
DLD
DLD
DLD
Lightning
SiliSleevs Silcone Penis Sleeves by MOS - NEW!
25 26 27
Replies
520
Views
120K
H
huge-girth
H
Lightning
  • Sticky
Girth work MityVac Hydro Vac Penis Pump User Instructions
5 6 7
Replies
132
Views
30K
L
limpeh
L
Back
Top Bottom