Equipment modification Modification to Bathmate HydroXtreme 7 with a pressure gauge

Hi @oldandlively
Just got the parta today and already assembled by your very accurate guide.
Already had the chance to try it and i really liked it. I finally could see my pressure with my Bathmate.

So the black marking is the inHG right?
I wonder why the pointer goes down to minus instead of going up? Is there a way to reverse it? As in the up site you have much more space and you have one whole line for each 1inHG where on the negative site you have each line for 2inHG which is a bit bummer where you can't see where you at in big, but need to really take a good look all the time.

P.s I saw that in 4-5inHG i feel the tense but it's not bad. While at 6inHG i starts to feel a bit on edge.
 

Attachments

  • 20240505_234624.jpg
    20240505_234624.jpg
    991.5 KB · Views: 0
  • 20240505_224216.jpg
    20240505_224216.jpg
    1.1 MB · Views: 0
trustr1 said:
Hi @oldandlively
Just got the parta today and already assembled by your very accurate guide.
Already had the chance to try it and i really liked it. I finally could see my pressure with my BM.

So the black marking is the inHG right?
I wonder why the pointer goes down to minus instead of going up? Is there a way to reverse it? As in the up site you have much more space and you have one whole line for each 1inHG where on the negative site you have each line for 2inHG which is a bit bummer where you can't see where you at in big, but need to really take a good look all the time.

P.s I saw that in 4-5inHG i feel the tense but it's not bad. While at 6inHG i starts to feel a bit on edge.
Click to expand...
Yes. Black mark is the inHg.
 
Is there a way to make it go up towards the positive as it's more BIG, and not down towards the negative ?
 
No. Positive is air pressure. Negative is vacuum pressure. If you like larger gauges, you can replace the one with only negative or vacuum pressure only. I have both. The gauge is fairly cheap.
 
@oldandlively is there some component/device you can put in a pneumatic system, where you can adjust the maximum vaccum pressure on a tube/line, and if the vaccum pressure goes over this pre-set value, you will not be able to add more vaccum pressure.

Some kind of release valve. šŸ¤”
Also it needs to be cheep.

I need this bad. I need to force myself to only do maintenance, becouse it do not go so well. I was expanding up to 7 Inch girth again this evening.

I don't think even need to use a pump now. Jelq's seams to be more the enough to keep my penis healthy.
 
Also good for safty in a water trap, but I do not know what to look for. šŸ¤”
 
squirt_inducer_man said:
@oldandlively is there some component/device you can put in a pneumatic system, where you can adjust the maximum vaccum pressure on a tube/line, an if the vaccum pressure goes over this pre-set value, you will not be able to add more vaccum pressure.

Some kind of release valve. šŸ¤”
Also it needs to be cheep.

I need this bad. I need to force myself to only do maintenance, becouse it do not go so well. I was expanding up to 7 Inch girth again this evening.

I don't think even need to use a pump now. Jelq's seams to be more the enough to keep my penis healthy.
Click to expand...
Yes, and it's a very bulky set up. Way too bulky. There's no mini inline version either. The valves you're looking for is digital (as manual is accurate) fluid regulator with bleed valve or a solenoid inline valve. Some comes together as a pump to pull the fluid to a certain pressure and stops, or some has a built in regulator to control the pressure, but these regulators are plugged into the electrical source.

1720301901706.png

or this type of set up (there is also a liquid version as well):

1720302265174.png


squirt_inducer_man said:
@oldandlively is there some component/device you can put in a pneumatic system, where you can adjust the maximum vaccum pressure on a tube/line, and if the vaccum pressure goes over this pre-set value, you will not be able to add more vaccum pressure.

Some kind of release valve. šŸ¤”
Also it needs to be cheep.

I need this bad. I need to force myself to only do maintenance, becouse it do not go so well. I was expanding up to 7 Inch girth again this evening.

I don't think even need to use a pump now. Jelq's seams to be more the enough to keep my penis healthy.
Click to expand...
Unfortunately, there's no compact version, and to have anything automatic with a pressure relief valve, you have to rig the set up with multiple stages. One is the pressure regulator itself, the second is the adjustable relief or bleed valve. I used to set this up for my aquarium with CO2 flow meters and diffusers. It's a living mess.
 
oldandlively said:
Yes, and it's a very bulky set up. Way too bulky. There's no mini inline version either. The valves you're looking for is digital (as manual is accurate) fluid regulator with bleed valve or a solenoid inline valve. Some comes together as a pump to pull the fluid to a certain pressure and stops, or some has a built in regulator to control the pressure, but these regulators are plugged into the electrical source.

View attachment 1836533

or this type of set up (there is also a liquid version as well):

View attachment 1836534



Unfortunately, there's no compact version, and to have anything automatic with a pressure relief valve, you have to rig the set up with multiple stages. One is the pressure regulator itself, the second is the adjustable relief or bleed valve. I used to set this up for my aquarium with CO2 flow meters and diffusers. It's a living mess.
Click to expand...
Thanks! :) Awesome information.
If I had my own workshop, I would create this and create an overbuild system.
Water trap and these switches, Solenoid valves, and all in a "compact" box made of aluminum.
This can be a project for the far far future.
You just have 2 hoses connected to this box. One for the vacuum pump and the other one for the penis cylinder.
The next step is to have an automatic vacuum pump, but that would not be as safe or easy to implement in my opinion.

You can always dream for the perfect solution!
I will stick with the discipline for now. I have removed the valves from my 2.25" and 2.5" Acrylic.
I even was thinking to get a 3" cylinder....šŸ˜‚ but I stopped myself. hahahaha!!!
 
We may end up with a Hulk penis pump system. Ease up brother, before you exceed the stallion standards and enter into unicorn standards, where a penis made only of dreams and wishes.
 
oldandlively said:
We may end up with a Hulk penis pump system. Ease up brother, before you exceed the stallion standards and enter into unicorn standards, where a penis made only of dreams and wishes.
Click to expand...
The decision is made, I will not use a penis pump as much, and if I do 5 in.Hg is max vacuum pressure, and 2" wide cylinder is the biggest (smallest) I am allowed to use. I will listen to only myself and no other.

Thanks for the talk.
 
oldandlively said:
We may end up with a Hulk penis pump system. Ease up brother, before you exceed the stallion standards and enter into unicorn standards, where a penis made only of dreams and wishes.
Click to expand...
I should think so
 
You must log in or register to reply here.

Similar threads

squirt_inducer_man
  • Sticky
Equipment modification Modifications to BathmateĀ® HydroXtreme models
Replies
7
Views
1K
squirt_inducer_man
squirt_inducer_man
squirt_inducer_man
O
Air-water hybrid pump mod with larger reservoir
Replies
9
Views
431
O
oldandlively
O
O
Pumping with water comparison to air (water vs air)
Replies
19
Views
444
DLD
DLD
DLD
O
MityVac comparison to Bathmate
Replies
10
Views
296
DLD
DLD
DLD
O
Sciences behind PE
2
Replies
21
Views
1K
DLD
DLD
DLD
Back
Top Bottom