Penimaster pro

Baba_Booey · Mar 7, 2012

I don't know how you can do max tension with this. I figured people were just using the PMP to get a light stretch. I tried as much vacuum as the pump ball could do (eventually it stays compressed and doesn't go back to its original shape) but I couldn't do anywhere next max tension without it coming off. I tried the adaptor rings too, but the same thing happens.

And if you're waiting a long time for your order it's possible that it was seized by customs. I'm in the US and I got my last order from them in 8 business days.

tparker84 · Mar 7, 2012

Baba_Booey;475705 said:
I don't know how you can do max tension with this. I figured people were just using the PMP to get a light stretch. I tried as much vacuum as the pump ball could do (eventually it stays compressed and doesn't go back to its original shape) but I couldn't do anywhere next max tension without it coming off. I tried the adaptor rings too, but the same thing happens.

And if you're waiting a long time for your order it's possible that it was seized by customs. I'm in the US and I got my last order from them in 8 business days.

How would it get seized? I just emailed them and they apologized for the wait and said they are checking into it

Baba_Booey · Mar 7, 2012

I had a Bathmate seized by customs because they labeled it as a medical device, but not the correct level of medical device. If customs is holding it, they'll probably contact you through the mail.

My PMP box was labeled something like device for correcting and extending, but it might be considered a medical device. With Bathmate, not all orders were seized, but some of them were.

If it's not customs, then they forgot to send your order or it got lost in shipping.

Still interested to hear from anyone that can use this with max tension.

celttank · Mar 7, 2012

I get max tension no problem. What i do first is half squeeze the ball and release it. The tip is barely inside. Then i take the ball off squeeze and reattach it. i do this twice. So i get 2 and a half sucks with the pump ball. Even my foreskin gets sucked all the way in. try this and see what happens.

shavenasian · Mar 7, 2012

I do it on max tension - in fact I have it on right now at max tension. I do something similar to celttank - but I end up doing 3-4 sucks of the pump ball. Today is my second day with the PMP - it took one attempt to get it on.

Baba_Booey · Mar 7, 2012

I use the pump ball multiple times, and eventually the ball stays compressed when it's on, like it can't suck anymore air out. My glans are fully in the chamber, but it's not a strong enough hold to use much tension.

Squashbuddie · Mar 7, 2012

Have you tried using lesser lube then? I can go max tension with no problem like the others.. I barely use any lube though, just enough to cover the glans with a thin layer..

Baba_Booey · Mar 7, 2012

I'm able to get a better hold without the split adapter, I guess I can't fully get in the chamber with it in. I'm using it at max tension now, but it doesn't feel like I'm stretching as hard as with a strap extender. Part of that could be the different base and springs, but I'll see how it goes.

celttank · Mar 7, 2012

Lube is not the problem, i use a shitload of lube!
You must be loseing suction somewhere and i'm guessing it's coming from the initital pump. When you pump first does any of ur glans get sucked in? You might be taking the ball off too quick. Leave the ball attached for about 15 seconds. Sometimes when i release the ball nothing happens but i wait 10 seconds and then it sucks the glans in.

Baba_Booey · Mar 7, 2012

I don't think I was doing anything incorrectly. I used the pump ball a couple times and got fully sucked into the chamber. I'd have a seal, but it can slowly pull away at high tension. I could probably use less bars and keep the seal, but as it is I don't get as good of a stretch as I do with my strap x4.

At least for me, a strap extender with my nail mod works better. A glans filled with blood and a strap is a much better attachment method than latex attached via vacuum.

9inchtail · Mar 7, 2012

Baba_Booey;475739 said:
I don't think I was doing anything incorrectly. I used the pump ball a couple times and got fully sucked into the chamber. I'd have a seal, but it can slowly pull away at high tension. I could probably use less bars and keep the seal, but as it is I don't get as good of a stretch as I do with my strap x4.

At least for me, a strap extender with my nail mod works better. A glans filled with blood and a strap is a much better attachment method than latex attached via vacuum.

you could have a defective head piece. Check for cracks. also check the valve cap and the valve to make sure there are no cracks. I cracked mines. I once maxed out tension ( didnt homd it long, maybe 15 minutes) just to see if it would hold and it held fine.

shavenasian · Mar 8, 2012

Check for cracks and make sure the latex pieces are on properly. I find that it doesn't matter how much lube I use, I get a good seal. Perhaps you should try a different lube.

ronan69 · Mar 8, 2012

I must say one thing , boy was I totally wrong about modifing my insert. I got injured again around the corona and right behind it. As the day went on the wearing of it rubbed me rawwwwwww , so bad it still healing after 4 dfays. Dickleaker is correct about the amount of vaccuum one is better off with to much than not enough , i feel that is the reason my injury happened.
The lube question that has been floating around, The PMP stuff is thick so that it helps increase adhession . I noticed that if I dont wash the glans chamber after a couple of applications there ends up being to much in there and thats when slipping occurs( at least w/ me). So that being said I am not so sured about using a lube that is mlor slippery , I would think you would have to incfreazse tyhe vacuum level to compensate for slippage. That is just my opinion . Good luck to all.

shavenasian · Mar 8, 2012

Ronan - good luck with that injury - sounds painful

celttank · Mar 8, 2012

what does adhesion have to do with anything? Your dick is being held in by a vaccum, not adhesion. The lube is for comfort and to create a seal. Slippery lube is great.

irspow · Mar 8, 2012

I would think that you would want something with a high viscosity just so that it created a good seal for the partial vacuum which is trying to be applied to an irregular surface. Like a "liquid gasket" :D I really should spend some money on one of these crazy devices that all of the kids are using LOL

Dickleaker · Mar 8, 2012

In the manual they explain why the lube has to be thick for that reason...better adhesion to distribute the pulling forces.
So guys if you are going to use a different lube go with the thicker silicone ones.

Tom...wish I had an extra one to send you for gratitude on how you have helped me!
You are a great addition to this forum and I wish you best in everything brother!

irspow;475811 said:
I would think that you would want something with a high viscosity just so that it created a good seal for the partial vacuum which is trying to be applied to an irregular surface. Like a "liquid gasket" :D I really should spend some money on one of these crazy devices that all of the kids are using LOL

ronan69 · Mar 8, 2012

Sorry .... I was trying to be helpful, although it did not seem to be recieved that way. I usually pay attention to odd details like that one , if someone would like to see a video on why this is supposed to work , her is the link
http://www.penimaster.com/Penis-Expander/PROMaster-Comfort-Care-Videos-Adhesion.html.
On a different note I have been using Hardboy Stackables to stretch my sack but, also pull the penile scrotal webbing down more towards or on the sack itself. I hope this helps w/ some of the fluid retention at the frenulum.
Squashbuddie mention that this was happening to him also . Good luck all and thanks for the help you have provided for myself in the past.

tparker84 · Mar 8, 2012

So i emailed this company about my pm kit and was told it hasn't left Germany and I ordered it feb 15. NEVER AGAIN MAN

n8dogg · Mar 8, 2012

That's Fuckin lame. I ordered mine a week after you and got it last friday

Penimaster pro

0

1

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

0

Similar threads