Penimaster pro

CaptainCaveman · Nov 16, 2012

Nice job on your progress man! About the skin growth....I'll try to explain my understanding of it. I do the best I can to put the head in only, but there is the space inside the sleuce that also needs to be filled. That's the area where the skin right behind the ridge of the glans sits because thats the part of the penis directly bordering the glans. With that said, I've been switching it off between the X4 and the PMP just to keep from getting any one area of contact from getting too sensitive. That seems to have helped and I've noticed some growth in my bpfsl due in part to me using it more, and also to making heating and manual stretching a part of the regimen.

diesel225 · Nov 16, 2012

MikeShlort;517732 said:
It's quite comfortable but I think there may be issues with losing suction and a bit of slippage. However, if you use the hose attachment and make the suction very strong there should not be much slippage.

You get slippage I haven't had that issue with the pro.

diesel225 · Nov 16, 2012

Jaronimo;517907 said:
Don't even bother with the pump ball unless you just want to for shits and giggles, the hose attachment reigns supreme. Make sure you play around with it for a while, different vacuum pressures and everything don't get discouraged by negative things you read on here. If there's a will there's a way and we all find our way at different times.

Like jaronimo said don't worry about the negative stuff everyone is different with this stuff you just have to find what works for u. I personally like the ball pump and don't use my tube but I like it as well but prefer the ball so to each there own just find the best way that works for u.

diesel225 · Nov 16, 2012

CaptainCaveman;517912 said:
Nice job on your progress man! About the skin growth....I'll try to explain my understanding of it. I do the best I can to put the head in only, but there is the space inside the sleuce that also needs to be filled. That's the area where the skin right behind the ridge of the glans sits because thats the part of the penis directly bordering the glans. With that said, I've been switching it off between the X4 and the PMP just to keep from getting any one area of contact from getting too sensitive. That seems to have helped and I've noticed some growth in my bpfsl due in part to me using it more, and also to making heating and manual stretching a part of the regimen.

Ok try this
1. Get slightly erect pull skin back so it's tight.
2 use the extra ring adapter they include this will allow you to feel when the head pops in once it clears that part stop suction.
3 pull head piece out with some tension pull shaft back slightly then with penis extended pull sluice ring back as it may bunch up.
I have had this happen to me at first it is over suction pulling the shaft in and skin bunches up behind glands. It is easy to do if you use the tube. Not the ball. I'm almost 100% sure this is the problem because when I started using the tube suction it happen a couple of times the I realized what I was doing I just kept sucking in air. Thus will also cause swelling and pain on the glans and behind the glands on the skin it will cause some fluid to be trapped in the shaft skin that got sucked in.

Dangler · Nov 17, 2012

I've heard from both cut & uncut users who have had shaft skin sucked in. This is the shaft skin between the glans corona ridge and the abdomen. Even happens to me.
If you suspect some skin has creep-ed in, you can reduce vacuum a little, pull on the skin to draw it out, then increase vacuum if needed.
See if less lube is a help, of just adjust it as diesel and I have described.
Note to those who are restoring their foreskin....This is an excellent way to extend and increase coverage, just let the skin be pulled in and stretched by the glans chamber. Remove hourly to prevent edema/water build up.

diesel225 · Nov 18, 2012

For some guys having problems with ball suction I found that when a new diaphragm The ball has Insufficient suction but once you get the diaphragm, to full expand by just re applying suction from the ball till the diaphragm is fully pulled in and see through. Then allow it to sit there for a bit to take shape and this will allow easy suction from the ball which I believe give correct pressure not over pressure. Don't get me wrong there is less learning curve with the tube suction but I think this may be causing some issues with over suction causeing pain to the glands and extra skin being sucked into head piece when not wanted unless you are trying to increase skin like mentioned by dangler. Hope this helps.

DLD · Nov 19, 2012

diesel225;518206 said:
For some guys having problems with ball suction I found that when a new diaphragm The ball has Insufficient suction but once you get the diaphragm, to full expand by just re applying suction from the ball till the diaphragm is fully pulled in and see through. Then allow it to sit there for a bit to take shape and this will allow easy suction from the ball which I believe give correct pressure not over pressure. Don't get me wrong there is less learning curve with the tube suction but I think this may be causing some issues with over suction causeing pain to the glands and extra skin being sucked into head piece when not wanted unless you are trying to increase skin like mentioned by dangler. Hope this helps.

i saw this and was pretty impressed. It seems to be the best point of the PeniMaster Pro.

CaptainCaveman · Nov 21, 2012

Thanks for the tip diesel and Dangler. Making sure shaft skin doesn't get sucked in is something I will definitely tend to. In my case though, its not excess shaft skin that's a problem. It's the border between the glans and the shaft. Right under the hood of the ridge. There's no way to make sure that doesn't get sucked in because its located directly in between the glans and the shaft. I need to find a way to reduce the strain on that part because it seems to be bearing lots of the tension as it is resisting the pull of the glans chamber (and the ring inside). The only thing I can think of is reducing the tension. But when doing it on low tension (over the 3rd line), I just feel like I'm wasting time. On the bright side...using the X4 in conjunction with the PMP is working out nicely. I definitely recommend switching it up to reduce potential irritation.

diesel225 · Nov 21, 2012

Supra;501766 said:
I dont like the PMP, i tired it and it makes your penis head turn white for months..no thank you. VLC still the best

Wow I would have thought you would have liked it. I never get any issues with the pro. Maybe give it a second chances reduce suction I use very little suction. I love the thing.

maybe you are to big for the head piece I think hey should make reg and larg size one size can't fit all.

CaptainCaveman · Nov 22, 2012

Wearing the PMP on highest tension with no pain

. Thanks to diesel for the great tip about removing shaft skin! And being patient. It pays to wait about 20 minutes before adding tension once strapped in.

tparker84 · Nov 23, 2012

Any PROGRESS from anyone

CaptainCaveman · Nov 23, 2012

3/8 of an inch in bpsfl in a month. But only after adding stretching.

magicjohnson · Nov 27, 2012

I can't even get my head in, ive been trying all day. This is really frustrating.

magicjohnson · Nov 28, 2012

FINALLLY.

I just got it to work, I ordered with the hose as well and I've tried both but for me the pump ball works way better. The hose doesnt work for me at all.

diesel225 · Dec 2, 2012

No problem man glad i could helped. Its funny how many times i have used a device and thought it didn't work put it away then take it out months later to see if i can make it work and some times a slight modification or different wrapping technique makes it usable.

For example when i used to use the Bathmate i never thought of multiple short sessions to keep fluid build up down I stumbled on dld routine and it help out a lot but now i use penomet so no need for short sessions. i think people try it for a little bit and then if it doesn't work perfect the first couple of times they figure its the device and not user error.

Again glad i could help.

diesel225 · Dec 2, 2012

i just added some 30 min hanging in with at albs try to hit it 2 times per day follow the grip types system hang 8lbs as they say this cause almost micro tears. so my thought is 1 hr hang per day 30 am 30 pm. will equal 3-4 hr of time over tension so if you hit 6 tour really at 8-10 hrs SG max tension is 2.5 lbs or something close to this. so this would equal 3-4 hrs in time over tension at max tension.

DLD · Dec 4, 2012

Pretty cool kit I must say. I had so much fun doing all the tutorials for the Penimaster and seeing all the different ways of use. Good shit Penimaster!

Dangler · Dec 4, 2012

so tonight, I get a notification about post #1234, see below:

Dear Dangler,

im4u89 has just replied to a thread you have subscribed to entitled - Penimaster pro - in the PeniMaster Pro Penis Enlargement Forum forum of Matters of Size :: Free Penis Enlargement Forums and Exercises.

This thread is located at:
http://www.mattersofsize.com/forum/showthread.php?65239-Penimaster-pro&goto=newpost

Here is the message that has just been posted:
***************
Id say the whole head starts to kill after 3 hours. Ill definitely try less bars.
***************

There may also be other replies, but you will not receive any more notifications until you visit the forum again.

All the best,
Matters of Size :: Free Penis Enlargement Forums and Exercises

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Unsubscription information:

To unsubscribe from this thread, please visit this page:
http://www.mattersofsize.com/forum/...=160311&auth=3ba67e4ea9f0cf4dd4c4ee111ce922ea

To unsubscribe from ALL threads, please visit this page:
http://www.mattersofsize.com/forum/subscription.php?do=viewsubscription&folderid=all

drudra · Dec 7, 2012

Ordered a penimaster pro complete set with the mos discount-ordered extra latex spares, lube, pulling force belt and tube suction fitting. Tried a number of times with much anguish but today it all came together and got in a one hour session. Onwards and upwards!

daysdaily · Dec 19, 2012

I've been scrolling through the forum was wondering if someone can give me mockup of the order, I should place? Also for maybe 1 year use what I should get.
Particularly the extras to buy like what is the hose system
and also the spare parts
I plan to get to the complete set

Penimaster pro

0

0

0

0

0

0

doublelongdaddy

0

0

0

1

0

0

0

0

0

doublelongdaddy

0

0

0

Similar threads