Hard core hanging

D

Dashdeming

Well-known member
I am now up to 33 pounds hanging for 20 minutes each day and 6 days per week. I believe that more weight and shorter hang periods are the ticket for me after extensive time working up to the heavier weights. I usually hang straight down and sometimes straight out.

Then:
October 23, 2002 - 5 5/8" BPenis EnlargementL and 4 15/16" erect girth

Now - 8" BPenis EnlargementL and 5 7/8" erect girth

That is 2 3/8" length gain in just over 15 months and 15/16" erect girth gain.

My routine is to hang 20 minutes and then dry jelk 500 to 800 strokes. I occassional use an [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words] for a few hours each day.
 
Dashdeming said:
I am now up to 33 pounds hanging for 20 minutes each day and 6 days per week. I believe that more weight and shorter hang periods are the ticket for me after extensive time working up to the heavier weights. I usually hang straight down and sometimes straight out.

Then:
October 23, 2002 - 5 5/8" BPenis EnlargementL and 4 15/16" erect girth

Now - 8" BPenis EnlargementL and 5 7/8" erect girth

That is 2 3/8" length gain in just over 15 months and 15/16" erect girth gain.

My routine is to hang 20 minutes and then dry jelk 500 to 800 strokes. I occassional use an [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words] for a few hours each day.
Click to expand...

Sounds like this is working really well for you so far. What weight did you start with?
 
I started at 8 pounds about 15 months ago and then moved up to 24 with-in 12 months. I hust recently moved up to 33 pounds so it will be several months before I move up more.

Yes, just 20 minutes although I have added a second 20 minutes several times per month. I believe heavy is the key for me!
 
This sounds interesting I need to try. Also did you just do one eset a day for those twelve months?
 
1) very nice gains

2) what device are you using?

3) I may try this myself, but obviously anyone thinking of doing this should proceed w/ extreme caution and should be able to handle the weight

4) Good Luck!
 
Xulf said:
1) very nice gains

2) what device are you using?

3) I may try this myself, but obviously anyone thinking of doing this should proceed w/ extreme caution and should be able to handle the weight

4) Good Luck!
Click to expand...

I have designed and constructed my owm hanger and yes you should take extreme caution and plenty of time to condition your penis.

Supra,
Yes, I only did one 20 minute set for the duration and will most likely stay with the 20 minutes but continue to increase the weight.

ItsElectric,
Yes, this is pretty much my routine the whole time. I have thrown in some pumping at times but not as a rule.
 
Wow, I've gotta admit that this makes me want to try this out. Any advice on how much max weight I should hang? I currently hang 15 lbs. Will it feel extremely stressful?

-ItsElectric
 
ItsElectric said:
Wow, I've gotta admit that this makes me want to try this out. Any advice on how much max weight I should hang? I currently hang 15 lbs. Will it feel extremely stressful?

-ItsElectric
Click to expand...


I tried this today and love it. I had to tighten my hanger more than usual of course, but I got a great work out with fewer sets. I did a total of 3 sets today, and with 25lbs my first set, 27.5lbs the next set and back to 25lbs my last set. All done BTC. I like this a lot better than 9 sets+ with 17.5 to 20lbs. I do not under any circumstances advocate that guys just go ahead and make drastic jumps in the level of weight they are using. This has to be done with extreme care. It has taken me several months....more like over a year, combined time of off and on hanging to work up to using 20lbs. So, in reality, I'm 'only' hanging 5 to 7.5lbs over my usual weight level.

I would personally advise only going a few pounds higher in weight than you might normally...at least at first to see how it feels. If things dont feel right, try changing your hanger settings or the amount of wrap you use. This may seem more than obvious to some of us, but the heavier you hang, the tighter your hanger should be.
 
NO. Why would it defeat the purpose of hanging?? The purpose...or more aptly, the POINT of hanging is to get a stretch for much longer than you could ever get with your hands doing manual stretching...with a set level of resistance. If you use your hands...you 'may' be able to get a stretch at 20lbs++, but only for a few minutes at most before your hands get tired and your grip fails. With hanging...you dont need your hands, and you can hold the stretch for 15 to 20 minutes.
 
stillwantmore said:
NO. Why would it defeat the purpose of hanging?? The purpose...or more aptly, the POINT of hanging is to get a stretch for much longer than you could ever get with your hands doing manual stretching...with a set level of resistance. If you use your hands...you 'may' be able to get a stretch at 20lbs++, but only for a few minutes at most before your hands get tired and your grip fails. With hanging...you dont need your hands, and you can hold the stretch for 15 to 20 minutes.
Click to expand...

I can hold a hard stretch for a good 5 minutes, and anyone could work up to that with practice. So all I have to do is switch hands 3 times to mimic a 20 minute hanging set.

But with my hands I can vary the resistance to get a maximum stretch the entire 20 minutes, wheras with a constant weight the first 10 minutes or so isn't max, but it gets harder as the set goes on. (I may be wrong, thats after 1 month hanging experience)
Also, its a hell of alot more comfortable (and safe) with your hand rather than a hanger, especially with a heavy weight which you plan on using.

So looks to me like manual is the way to go if you want heavy weight and short duration.
 
quijjiboo said:
I can hold a hard stretch for a good 5 minutes, and anyone could work up to that with practice. So all I have to do is switch hands 3 times to mimic a 20 minute hanging set.

But with my hands I can vary the resistance to get a maximum stretch the entire 20 minutes, wheras with a constant weight the first 10 minutes or so isn't max, but it gets harder as the set goes on. (I may be wrong, thats after 1 month hanging experience)
Also, its a hell of alot more comfortable (and safe) with your hand rather than a hanger, especially with a heavy weight which you plan on using.

So looks to me like manual is the way to go if you want heavy weight and short duration.
Click to expand...

I would certainly agree with you that if you have any reservations at all you should not hang. Do what you feel comfortable doing. I must say though that this has worked for me so far because my penis is much longer now. Like many things, there is more than one road that can be traveled to get there. I went through a short period where I switched to manual work but I just wasn't seeing results at the pace I wanted and I also did not have extra time to commit to stretching.

I would also like to add that I will do this until the numbers tell me to hit the stretching again and then I will switch it up.

Believe me though, hanging heavy will make your dick bigger and, for some reason, it makes me away hornier to boot.

Your mileage may vary so be careful gentlemen!
 
Has anyone else tried and seen results or felt the results?

I have been thinking of doing this, and now my schedule is so busy I rarely have time to Penis Enlargement. This seems like a great way to get a good workout in a very short amount of time. And it seems perfect for the working man of the 2000's :gluedtosc
 
Did my first routine in a while this morning with this method. I used 20lbs, but felt like I could do more. I'm trying 25lbs tomorrow to see how it feels since I don't have any 2.5lb weights. I've calculated that I only need about .22" a month to get to my goal in 6 months. Tonight is my girth session, and tomorrow morning is my hanging session again. Any last words of advice you could give me? :)

-ItsElectric
 
Yeah, I'm going back and forth with 20 and 25lbs.. Some days I can do 25, some I can't. :) Hopefully I'll see gains soon. I've been doing this consistently for almost two weeks now. I'm proud of myself.

-ItsElectric
 
Any skin burning to go with those sudden increases in weight? I sometimes do what I call a "shock routine" and it really is demanding on the skin etc. I've been hanging a while and know how to wrap,so I don't need any wrapping instructions. :)
Rich
 
ItsElectric said:
Yeah, I'm going back and forth with 20 and 25lbs.. Some days I can do 25, some I can't. :) Hopefully I'll see gains soon. I've been doing this consistently for almost two weeks now. I'm proud of myself.

-ItsElectric
Click to expand...


How is this working?
 
trigger said:
Dashdeming- Any details on your hanger design? I have made a few but cannot hang over 15lb comfortably.
Click to expand...

What type of hangers have you made so far trigger? Have you made a modified BIB yet? I used to use one of those before the production pieces became available and could hang over 15lbs. Maybe your penis just isnt ready for beyond 15lbs yet? That could be another possibility. It took me several months to go from 15lbs to 17.5lbs.
 
Is the modified Bib good?, thats the one with the PVC tube and the other tube with a V-notch, right? I may give it a go. I made one similar to the Uli type bib hanger which didnt work too well on me.
My first was 2 steel plates with 4 nuts and bolts. My latest was a hinged metal one with 2 nuts and bolts. I have tried some with PVC pipe but it flexed too much. I glued some sandpaper to the metal ones which is amazing for gripping the wrapping material.

I also use a cable clamp with a weight looped which is good up to 5lb. I have made a [words=http://TLCTugger.com/MOS]tugger[/words] which is good up to about 4lb but have hung 10lb for a few minutes with it too. I love the [words=http://TLCTugger.com/MOS]tugger[/words] as it stretches the full length.

I also think my problem may be too little clamping area, Bib said the commercial bib is 3" long, my biggest was 2-2.5". Bib said he has used ones up to 4.5" long! If only I had that much to spare! He also said he hung 60lb for a short time with the commercial Bib hanger.

I think I am ready for the weight, it is only sore at the clamping point. I can manually stretch what feels like far more than 15lb but just can't hold it long enough. I have been Penis Enlargementing for about 9 months now.
 
Last edited:
You REALLY need to read my sticky threads at the top of this forum before you injure your dick. The home made bibs are more than 'pretty good' , theyre one of the best options you can have for a home made hanger, and the easiest to make. They are made from a clear nylon hose with braided nylon cord molded through it. The stuff is supposed to flex some. It's described in detail in THIS THREAD.
 
The science behind plastic deformation shows that duration rather than load is the most important. However, 40% of a tendons maximum load bearing capability has been shown to be optimal for plastic deformation, and I know of no reliable data we can extrapolate this into actual weight for hanging - I'd expect it to be quite a lot....more weight than is commonly used in hanging.
 
I put off getting into this until a few days ago because I knew I'd have to change my hanger settings to accommodate the higher weights. I ended up moving the bottom adjustment nuts out a few turns each. Made a big difference for me. I had two very intense 20 minute sets last night with 25lbs! Thats the heaviest I've gone so far, but I like it.
 
stillwantmore said:
I put off getting into this until a few days ago because I knew I'd have to change my hanger settings to accommodate the higher weights. I ended up moving the bottom adjustment nuts out a few turns each. Made a big difference for me. I had two very intense 20 minute sets last night with 25lbs! Thats the heaviest I've gone so far, but I like it.
Click to expand...

So you found the grip more comfortable for higher weights with the bottom nuts adjusted out a little.

Did you find that you needed to tighten the top nut up much more to stop the hanger sliding too far forward during your hanging set?

That is what has always worried me about hanging, having to tighten the hanger too much. I am afraid of damaging my penis by squashing it.

On another note SWM, are you still wearing the golf weights, any good?
 
inamo said:
Dash,
In the earlier posts you said you constructed a hanger, can you further elaborate on this?
Click to expand...

Sorry it took so long to respond. I have been asked many times for this info so I copied a reply from a PM for you. Take a look and ask questions if you need to. I still need to take some pictures and I will do that as soon as I get another digital cam. Good luck and be careful!

Re: Your Custom Hanger??

--------------------------------------------------------------------------------

Quote:
Originally Posted by shism2
How did you make your hanger???? I also want to know how you hang... You just put the weight on the hanger and just let he penis fall and hang downwards??


Ok, to construct the hanger:
Buy a schedule 80 2" PVC coupler. Cut the coupler axially into 1/3 pieces and discard on piece. Buy a short stick of 3/4"X3/4" sst angle iron. Cut 4 pieces of angle iron to 1/4" shorter than the 2" coupler. Bend the 4 angle iron pieces from the 90 degree angles to about 135 degress.Clamp the angles axially to the outside edges of the 2 couplers and then drill three 3/16" holes through the angle and coupler. Do this to all four edges. Get 3/16" sst pop style rivets that are about 1/2" long and set them tightly from the concave side. This will give you two pieces of PVC with two angles on each that, when held together, form a clamp with the angles reasonably parallel to each other. Clamp the two halves together and then drill two holes in each side. Get machine screws (start with 3" long and trim to suit your size) with washers and wing nuts. Put these through the holes to allow sizing anf tightening. Next step is to get a 12" piece of strapping and rivet one end to the forward edge of each half of the clamp and in the pvc. Remember to insert and set the rivet from the concave side. Last step is to buy a dense foam rubber kneepad or similar material and cut two pieces to fit into the concave side of each clamp half. Rivet this in place using washers too so that the padding does not move. I also used polyurethane to glue this into the clamps. Now you are ready to hang.

I used a heating pad to warm up then wrapped with [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace[/words] type material that is self sticking. You choose where to place the clamp but I placed mine about mid-way of my shaft and left about 1 1/2" in front. Adjust the clamp to your taste so that you are comfortable. Also, the gaps should be vertical so you are not clamping on your nerves along the top of your penis. When you are happy with the clamp you can then apply weight as you wish. I sit in a chair and rock back sort of on my back and use a straight out pulley arrangement with weight at the end. This allows me to work and surf while hanging. I never hang more than 20 minutes at a time but sometimes I hang 2 times per day. Good Luck!
__________________
"I have never lived this long before" - Dash
 
bluenun said:
So you found the grip more comfortable for higher weights with the bottom nuts adjusted out a little.

Did you find that you needed to tighten the top nut up much more to stop the hanger sliding too far forward during your hanging set?

That is what has always worried me about hanging, having to tighten the hanger too much. I am afraid of damaging my penis by squashing it.
Click to expand...

The BIB hangers are designed to be used very tightly. There are grooves and channels molded into the hanger insides that allow for blood flow with the hanger tight.

On the nuts. For me yes. Moving out the bottom adjustment nuts allows the penis to be put farther down into the hanger....you want to be as far down in the hanger as you can be anyway. It's hard to explain. You just have to have a BIB and know the user guide well enough to understand what I'm talking about. There's not really such a thing as tightening a BIB hanger "too much". You want it tight enough so that it will anchor itself where it should when hanging. If you have it set up properly, there wont be any problems with it moving during hanging. Again, you just have to have a BIB to know what I'm talking about.
 
Dashdeming said:
Sorry it took so long to respond. I have been asked many times for this info so I copied a reply from a PM for you. Take a look and ask questions if you need to. I still need to take some pictures and I will do that as soon as I get another digital cam. Good luck and be careful!

Re: Your Custom Hanger??

--------------------------------------------------------------------------------

Quote:
Originally Posted by shism2
How did you make your hanger???? I also want to know how you hang... You just put the weight on the hanger and just let he penis fall and hang downwards??


Ok, to construct the hanger:
Buy a schedule 80 2" PVC coupler. Cut the coupler axially into 1/3 pieces and discard on piece. Buy a short stick of 3/4"X3/4" sst angle iron. Cut 4 pieces of angle iron to 1/4" shorter than the 2" coupler. Bend the 4 angle iron pieces from the 90 degree angles to about 135 degress.Clamp the angles axially to the outside edges of the 2 couplers and then drill three 3/16" holes through the angle and coupler. Do this to all four edges. Get 3/16" sst pop style rivets that are about 1/2" long and set them tightly from the concave side. This will give you two pieces of PVC with two angles on each that, when held together, form a clamp with the angles reasonably parallel to each other. Clamp the two halves together and then drill two holes in each side. Get machine screws (start with 3" long and trim to suit your size) with washers and wing nuts. Put these through the holes to allow sizing anf tightening. Next step is to get a 12" piece of strapping and rivet one end to the forward edge of each half of the clamp and in the pvc. Remember to insert and set the rivet from the concave side. Last step is to buy a dense foam rubber kneepad or similar material and cut two pieces to fit into the concave side of each clamp half. Rivet this in place using washers too so that the padding does not move. I also used polyurethane to glue this into the clamps. Now you are ready to hang.

I used a heating pad to warm up then wrapped with [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace[/words] type material that is self sticking. You choose where to place the clamp but I placed mine about mid-way of my shaft and left about 1 1/2" in front. Adjust the clamp to your taste so that you are comfortable. Also, the gaps should be vertical so you are not clamping on your nerves along the top of your penis. When you are happy with the clamp you can then apply weight as you wish. I sit in a chair and rock back sort of on my back and use a straight out pulley arrangement with weight at the end. This allows me to work and surf while hanging. I never hang more than 20 minutes at a time but sometimes I hang 2 times per day. Good Luck!
__________________
"I have never lived this long before" - Dash
Click to expand...

Any pictures? it may be just me but your explanation put me in the same position as a blind monkey in the dark.
 
I am being asked a lot by newer users regarding my "Hardcore Hanging" style that I have been using for the last 16 months so I wanted to bump this thread up for easy find.

Remember guys, this is not for new hangers. You must work your way up tp these big weights so you don't hurt yourself. Be carefule!!
 
It's great to see that you've made such tremendous progress Dash, that really gives me something to look forward to as I continue my hanging. I just began hanging a couple of weeks ago, so I'm not ready to attempt this "hardcore" hanging yet, but I might try it out in the future....

I hope you continue to receive amazing gains.
 
Matt said:
Wow,Thats awesome Dash!!
Are those gains since you started hanging or since youve been into hard core hanging?
Also, for how long have you been hanging in total?
Click to expand...

Due to my lack of time and lack of privacy as I am a stealth Penis Enlargement'er, I have always been a hanger in this way which is ato only hang one 20 minute very heavy session per day. I have been able to throw in a second session on about 5% of those days.

I have been hanging for 22 months.
 
Dashdeming said:
Due to my lack of time and lack of privacy as I am a stealth Penis Enlargement'er, I have always been a hanger in this way which is ato only hang one 20 minute very heavy session per day. I have been able to throw in a second session on about 5% of those days.

I have been hanging for 22 months.
Click to expand...


hey dash, any problems with erections after those 22 months? slower to get one, etc.?
 
gorillaunit said:
hey dash, any problems with erections after those 22 months? slower to get one, etc.?
Click to expand...

Gorilla,
Yes, early on I did have erection problems but it was there from an accident that I was involved in and it was not due to the hanging as it was hauning me about a year before I seriously started Penis Enlargement. Good luck with your hanging and be safe.

Matt said:
hey Thanks for the answers Dash.
Click to expand...

You are welcome Matt.

Good luck with your hanging and be safe.
 
Hi there! I´m new to this place but not new to hanging.I´m hanging since 1.5 years on and off´,have gained about an inch within the first few months.Then I read Bib´s LOT theory and started OTS hanging for the next 4 months.
My LOT back then was about 7.Anyway,didn´t gain anything from OTS.
So I´m back to BTC,this time hardcore hanging for 1 hour a day without any rest days.I can comfortably hang 25 pounds for 3 sets of 20 minutes (before I was hanging 17.5 pounds for 6 sets).
I hope this will give me another inch gain within the next couple of months.
 
Good first post and welcome to the forum. Sounds like you have a good routine and I am anxious to here more from you regarding your success in the future. Are you using a BIB hanger or other device?
 
You must log in or register to reply here.
Back
Top