Penimaster pro

Dickleaker · Feb 12, 2012

I stretch as far as I can without causing any damage to my glans namely blisters.It has taken me awhile to know where this sweet spot is.
From the studies I have read time worn in an extender is one factor but so is tension.
For example if you have 2 men wearing extenders for 8 hours a day for 6 months but one dude was at a higher tension then on average he would gain more size.

The problem with the peni pro is that its so comfortable that you stretch could at very high tension and then get blisters on your glans because you didn't notice any problems...altho the manual says you should feel itching/burning feeling on your glans if the tension is too high.

Anyway 9inchtail if you are stretching a half inch above your erect length you should be good.Watch for signs of new stretched length tho and keep increasing the screw rods if that is going to be your marker.
Also try getting erections while extending and watching �naked people movies�.Its good for extra blood flow and expansion in a stretched state and it looks very inspiring to see your future bigger cock hard!!

9inchtail;472540 said:
Hey is anyone familiar with how far to stretch to promote growth? This is what I'm doing: I measure my erect length right below my glands. When I strap into my extender, I stretch that area about a half inch further. Is this enough to promote growth? The stretch is comfortable, but my dick isn't tight while stretched in. Is this the way it's supposed to be?

9inchtail · Feb 12, 2012

Dickleaker;472594 said:
I stretch as far as I can without causing any damage to my glans namely blisters.It has taken me awhile to know where this sweet spot is.
From the studies I have read time worn in an extender is one factor but so is tension.
For example if you have 2 men wearing extenders for 8 hours a day for 6 months but one dude was at a higher tension then on average he would gain more size.

The problem with the peni pro is that its so comfortable that you stretch could at very high tension and then get blisters on your glans because you didn't notice any problems...altho the manual says you should feel itching/burning feeling on your glans if the tension is too high.

Anyway 9inchtail if you are stretching a half inch above your erect length you should be good.Watch for signs of new stretched length tho and keep increasing the screw rods if that is going to be your marker.
Also try getting erections while extending and watching �naked people movies�.Its good for extra blood flow and expansion in a stretched state and it looks very inspiring to see your future bigger cock hard!!

Thanks for that info. So far I'm stretching far enough where only two or three tension bars are showing. I wore it for 4 hours straight, expecting the worse when I took it off. But thankfully I was fine. I'm really loving this thing. I've already mastered getting it on, 30 seconds and I'm ready to extend. Awesome!

regtam25 · Feb 13, 2012

i thought the amount of hours you wear it will determine the length you can obtain. like if i wear it 12 hours a day for 6 months with manuals for 30 min to an hour i can see 2 inches.

celttank · Feb 13, 2012

So 20 days later the shipping info on the dhl.de website has finally been updated. It says "The shipment is being transported to the destination country".
If this is true then i might have this thing in a day or two.

Dickleaker · Feb 13, 2012

Good news man!
Penimaster just sent me the wrong latex pieces that I ordered awhile back as backup.They must have a language barrier or they are stupid. I thought normally the germans are on top of things.

Good luck with getting your pro soon!!

celttank;472689 said:
So 20 days later the shipping info on the dhl.de website has finally been updated. It says "The shipment is being transported to the destination country".
If this is true then i might have this thing in a day or two.

Dickleaker · Feb 13, 2012

You are correct in your general theory.However I think 2" in 6 months would be rare.Don't set yourself up for extraordinary gains like that and be disappointed.
However when you gain your first half inch you will use that as your motivator to get more because at that point you will become a believer and there is nothing more powerful than getting those initial gains.

regtam25;472685 said:
i thought the amount of hours you wear it will determine the length you can obtain. like if i wear it 12 hours a day for 6 months with manuals for 30 min to an hour i can see 2 inches.

Dickleaker · Feb 13, 2012

Good to hear buddy!!

The word is spreading on this device.Its best tool so far for me in my Penis Enlargement journey.

Once you get used to it I think you can go at a bit higher tension with caution and more regular check than 4 hours at first anyway.
I stretch so i can only see the first notch on the tension bar or a little above it so the springs are barely bouncing like 1/8".

If you can go for 4 hours without a problem you would be good to sleep with it for first half of night to add to your logged time every day!

I am looking for someone to do this with me so we can compare notes.

9inchtail;472639 said:
Thanks for that info. So far I'm stretching far enough where only two or three tension bars are showing. I wore it for 4 hours straight, expecting the worse when I took it off. But thankfully I was fine. I'm really loving this thing. I've already mastered getting it on, 30 seconds and I'm ready to extend. Awesome!

Moresize · Feb 13, 2012

I've read through this thread and it looks like a good, if expensive, purchase. It's looking like I'm not going to get the parts I need for my SS so it's time to go back on the prowl for an ADS. I've got a couple questions for people who have this:

-If I read the order page correctly for the Penimaster Pro, it sounds like you only get enough rods to stretch your penis 9" unless you buy more rods. Is that right?
-Does anyone actually have the belt attachment and can say if it's effective or not? Getting hours in at work would be badass.
-What extra parts should be ordered with it to be on the safe side? I don't want to get it and then have to stop using it for 2 months (and waste 8 euros on shipping) because I didn't plan ahead.
-How long does a tube of that comfort and care cream last?
-Can the springs from Autoextender mentioned in this thread be used with their extender? Same question for the Autoextender V-stretch.
-Where's this MOS discount I read so much about in the thread?

9inchtail · Feb 13, 2012

Dickleaker;472731 said:
Good to hear buddy!!

The word is spreading on this device.Its best tool so far for me in my Penis Enlargement journey.

Once you get used to it I think you can go at a bit higher tension with caution and more regular check than 4 hours at first anyway.
I stretch so i can only see the first notch on the tension bar or a little above it so the springs are barely bouncing like 1/8".

If you can go for 4 hours without a problem you would be good to sleep with it for first half of night to add to your logged time every day!

I am looking for someone to do this with me so we can compare notes.

Im trying to give myself a break in period of one month, working with the tension and seeing how much and how long I can handle it. Last night after going 4 hours straight, once I took off the PM pro I noticed some very minor swelling right around my urethra opening. It was puffy like It is when I use my Bathmate. Has anyone else experienced this? I don't know if this is normal due to the fact I am under vacuum. But I'm gonna do no more than 3 hours at one time under my current tension, and I'll increase it a bit every week until I find my "sweet spot" and know with out a doubt that I can wear this thing 4 hours while sleeping. I'll keep you posted.

9inchtail · Feb 13, 2012

Moresize;472761 said:
I've read through this thread and it looks like a good, if expensive, purchase. It's looking like I'm not going to get the parts I need for my SS so it's time to go back on the prowl for an ADS. I've got a couple questions for people who have this:

-If I read the order page correctly for the Penimaster Pro, it sounds like you only get enough rods to stretch your penis 9" unless you buy more rods. Is that right?
-Does anyone actually have the belt attachment and can say if it's effective or not? Getting hours in at work would be badass.
-What extra parts should be ordered with it to be on the safe side? I don't want to get it and then have to stop using it for 2 months (and waste 8 euros on shipping) because I didn't plan ahead.
-How long does a tube of that comfort and care cream last?
-Can the springs from Autoextender mentioned in this thread be used with their extender? Same question for the Autoextender V-stretch.
-Where's this MOS discount I read so much about in the thread?

Hey Moresize, The size of rods you get with your kit is more than 9 inches. I've only had my kit for a few days, but you only need a small amount (the size of a pea) of the gel. It seems like it will last a long time. I, however, bought one extra. I also bought extra bags of the latex. I think when/if you order PM Pro you should order extra bags of latex too. You may or may not need the hose. The suction bulb works fine for me, but Im glad to have another option if I need it. I don't have the belt attachment so I can't comment on that. I don't know anything about springs and such, I would like to learn about this too.

Moresize · Feb 13, 2012

When you say latex, are you talking about the sluice and/or the diaphragm?

9inchtail · Feb 13, 2012

Moresize;472773 said:
When you say latex, are you talking about the sluice and/or the diaphragm?

I dont know their names, but there are only two of them, and you need to get extra packs of both. I bought the extras that have them together (Both latex pieces) in one bag just to be on the safe side.

celttank · Feb 14, 2012

Got it this morning. think my dick is too big for it. Can't get it to suck my dick inside. The latex opening is way too small.

9inchtail · Feb 14, 2012

celttank;472787 said:
Got it this morning. think my dick is too big for it. Can't get it to suck my dick inside. The latex opening is way too small.

glad you got yours. Make sure those rings aren't inside (I don't remember what their called but they come in two sizes). I read on other forums that the green hose (optional) works best for those with bigger dicks. If youonly have the bulb to use try getting some blood in your flacid penis. If you can bounce your penis up and down then you have too much blood. Just enough blood to fatten you up a bit so that you can poke your head into the hole while the vacuum is sucking it in. Squeeze the bulb and attach it and suck yourself in. If it doesn't go in all the way, leave your dick inside at the point it's in, take off the pumping bulb, and then apply it again. This time it should suck you all the way in. Make sure you are squeezing the bulb really hard when you attach it. Also make sure the valve is closed completely on the head attachment before you apply the suction bulb. Let us know if this helps or not?

celttank · Feb 14, 2012

I'm gonna give it another go after i do my manual stretches. Thanks 9inchtail.
I was messing around with this thing for hours earlier on before i realised that the fucking valve had come off and was inside the bulb hahaha. I was wondering what all that rattleing was! It was only when i watched the videos that i realised i was missing a piece of the device, i was looking everywhere for the damn thing haha. Was able to fish it out with a screw driver. Eventually i got my dick most of the way in but i had to push it in with my finger and it hurt like hell. Some of my glans was still sticking out though but the suction was solid.

Dickleaker · Feb 14, 2012

Glad you finally got it!

Like 9" says make sure the extra plastic ring for smaller diameter penises (how do you spell more than one penis

is taken out ,I think it comes preassembled with it already in place.
My head is also big and I have to wait for the suction to pull it inside for sometimes 30 seconds.If the first pump ball squeeze isn't enough ,turn it and the valve back to the starting position ,squeeze out more air,rotate it and the second squeeze should pull in even the biggest cocks!
Good luck and be patient with yourself. There is a learning curve to this .

celttank;472787 said:
Got it this morning. think my dick is too big for it. Can't get it to suck my dick inside. The latex opening is way too small.

MOSman20 · Feb 14, 2012

Dickleaker;472365 said:
I also ordered today the heavy duty springs from autoextender to replace mine .They have a 5.5 lb load so i will be getting more from my time in the extender. I'm guessing that since the small rods I bought from autoextender fit the SG perfectly then so would the springs!!

Where did you read what springs sizegenetics use?
Im planning to oder addintional bars from autoextender and thought maybe i also should buysprings but could not any info about than on sizegenetics web site.

celttank · Feb 14, 2012

Got it working perfectly thanks guys. Now all i need is more rods. I'm very close to my max

tparker84 · Feb 14, 2012

I was reading on here that autoextender has them there like $8 I think I plan on ordering them also

totootot · Feb 14, 2012

Couldnt keep waiting so I went ahead and ordered the upgrade kit. Time will tell how long it takes to get to Texas...

I also ordered the extra tube and latex parts just in case, no point in having to wait weeks and weeks for a replacement should i ever need it. Cant wait!

Penimaster pro

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

1

0

Similar threads