Growing that monster snake

Thanks guys

Dickleaker;455089 said:
King Cobra
Awesome work man!
That is halfway to your knees and if you are 6'4" you cock must be 2' long ;)


You think low tension is better?
When I stretch at higher tension my EQ is not as good.

How long did you stretch at low tension before adding the 0.5" bars?
Click to expand...

I don't think low tension is better, I think varying tension is the best. I don't let my penis get used to the same tension.

My method is kinda unorthodox:
I start extending at max. tension that I can cope with. I wear this setup all sessions till the 3rd tension (500g on [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words], I think) mark is visible. This is the sign for me do add bars! So, I add 0.5" bars to the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] and repeat the process described earlier.
I don't bother keep the same tension by turning the screws. I'm just too lazy for that, plus it increase the chance of unequal tension distribution.
 
14-10-‘11

I’m still using 3”+2”+2” bars on the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words]. Pre-stretching with the [words=http://TLCTugger.com/MOS]VLC[/words]+cloth hanger works very good. In this way, there is no initial discomfort at higher tension.
The average time I spend in the [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ANS[/words]-setup is 2-3h. Do you guys think I should get more hours in at night???

I’ve thrown in kegels before my manual stretches and focus on reverse kegels while stretching. Following the DLD blaster theory on the pc-muscle. Also trying to exhaust the pc muscle.
I don’t use the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] at the moment, great girth tool, but it robs your EQ when frequently applied and doesn't work well with my [words=http://TLCTugger.com/MOS]VLC[/words].
 
07-11-’11

After making very minor BPFSL gains with mainly [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] work, I decided to change my routine. I’m removing [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ANS[/words] from my routine. I don’t sleep well in this setup.
I decided to optimize my length routine after reading some info on Kingsnake’s and SirKyle’s page, thanks guys!
This includes among other things, hanging. I started with 2.5 kg for the first week. My [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] stretches max with 2.1kg so this week I moved on with 5kg (11 pounds). I’m planning to stick with 5kg for a some months. I try do 2 sets of 15 min and slowly work up to 20 min.
My new routine consists of manuals(basic stretches and Snake chokers), hanging and extending.
Hanging 5kg and [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] on med-low tension (1kg).
I still want to achieve my sub-goal of 9”BPenis EnlargementL so baaaad.
 
5kg sounds like a lot to me. I feel quite some fatigue from hanging 2kg right now, lol :)
Also: What [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] do you have? This isn't the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words], right?
 
SirKyle;461626 said:
5kg sounds like a lot to me. I feel quite some fatigue from hanging 2kg right now, lol :)
Also: What [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] do you have? This isn't the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words], right?
Click to expand...

I have the X4-labs [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] with girth base.
 
can you pull your balls through this setup and what did it cost? Do they ship Europe-based (aka: Will I have to pay customs?)

Also: About the hanging: I'm taking a very slow approach. I just yesterday added 0.25kg from 1.75 to 2kg and oh boy what a pull.
Obviously, if you're not feeling jack shit, you should add quicker.

Going from 2.5 straight to 5kg seems a bit excessive to me though ;)
Do you have time for proper Bib hanging or are you hard pressed and doing more extreme hanging?

Anyways, you might wanna look for what swm is doing and there was a guy at thunders called steelfire who also had success with short hanging.
 
I cannot pull my balls through. X4-extender is made in Canadian I think. I shipped to Europe and got no custom bill.

I agree that 2.5 to 5kg is a big step. I didn't had lower weight plates and just went with it. 5kg felt good for me.
I'm hanging with a BIB-starter in a bibbish way and doing 2 sets in the morning and 2 sets in the evening.(I wrote it wrong in post #257). Gradually I want to increase sets and set-time to 20min.
I will check it out, thanks!
 
KingCobra;461632 said:
I cannot pull my balls through. X4-extender is made in Canadian I think. I shipped to Europe and got no custom bill.

I agree that 2.5 to 5kg is a big step. I didn't had lower weight plates and just went with it. 5kg felt good for me.
I'm hanging with a BIB-starter in a bibbish way and doing 2 sets in the morning and 2 sets in the evening.(I wrote it wrong in post #257). Gradually I want to increase sets and set-time to 20min.
I will check it out, thanks!
Click to expand...

I thought the base was pretty big on that model?
 
doublelongdaddy;461742 said:
I thought the base was pretty big on that model?
Click to expand...

The model is girthier, but also has a thinner contact point with the body. This makes it "cut" a little bit more in the skin than the original base piece. Therefore you'll be needing some base padding.
I just couldn't fit my balls through.
 
KingCobra;461775 said:
The model is girthier, but also has a thinner contact point with the body. This makes it "cut" a little bit more in the skin than the original base piece. Therefore you'll be needing some base padding.
I just couldn't fit my balls through.
Click to expand...


I wonder if it would be a big seller if we got [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words] to make a base piece large enough to do this. Has anyone, who is reading this, tried to extend with balls through the base piece?
 
there's no way I could put my balls through the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] base piece. My dick barely fits through.
I have heard of people of girths up to 5.5" who were able to pull them through the X4 Girth Base
 
SirKyle;461921 said:
there's no way I could put my balls through the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] base piece. My dick barely fits through.
I have heard of people of girths up to 5.5" who were able to pull them through the X4 Girth Base
Click to expand...

Take a look at post #240 and #248. I don't have monsterous balls (somewhat large), but for me it's a no go.
The balls aren't the issue for me. I switch between up and down every 30 min.
 
doublelongdaddy;461878 said:
I wonder if it would be a big seller if we got [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words] to make a base piece large enough to do this. Has anyone, who is reading this, tried to extend with balls through the base piece?
Click to expand...


It would be a great improvement, because it would place tension directly on the body instead of the ball sack.
However this increases the total size of the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words], making it even less stealthy/easy to wear.
 
Sounds like you are ready for the wrist watch stretch, hehe
 
Thanks guys!!!
I'm currently in a shitty situation. With me having a female "roommate", I have to be more stealthy with my Penis Enlargement :(.
Just when I was making good progress... However one of the things I have learned from Penis Enlargement is to improvise and be creative.
So, I will do Penis Enlargement and I will continue my gains.

@ PJP2002, lol. Imagine "dick smell" on your watch. Show it to a chick close to her face and watch her facial expression XD

@ Sirkyle, cool man. Don't slow down, you're making good progress!
Btw. how much is you BPenis EnlargementL?
 
sibly;464315 said:
Can it really be a shitty situation to have a female roommate?
Click to expand...

If she was fine, gave me sex when I wanted it, left when I wanted her to and she cleaned and made me dinner it is all good:)
 
I'm around oBPFSL 225 now. o for optimistic, meaning standing, above the shaft, but pressed like no tomorrow and ass moved backwards.
The last time I measured oBPenis EnlargementL, I was at 204. BPenis EnlargementL in the way I can take a picture, i.e. ass not moving and what not, I was at 195.
 
05-12-‘11

If you have been following my progress, than you know that I’m in a f’d up place to do Penis Enlargement.
My current daily routine consist of 1-2 BathmateG sets of 20 minutes (morning and/or evening) and 3=< sets manual stretching of 15 minutes. I try to do this 7 days a week.
Guess what… My BPFSL has increased to 225 mm! My last measured BPenis EnlargementL was 205 mm and MSEG was 160 mm after a BathmateG session though.(I got to be honest with you guys) My final erect uncompressed length in the BathmateG was exactly corresponding with my BPenis EnlargementL. If I compress the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] against my body, I reach around 210.
 
KingCobra;466268 said:
07-12-'11

The foam padding of my BathmateG is starting to let go :(.
Click to expand...

Then rip it off and get the penile sleeve modification. It will make your [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] that much better.
 
SirKyle;466328 said:
the sleeves are somewhat hard to get in Europe.
Let me know if you find them.
Click to expand...


If it becomes difficult for you guys to get the sleeves we can add them to the store, I just need to know.
 
it's been a while since I searched for them (and couldn't find them). Basically it was before I even had the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Herc[/words] (OCD you know...)
Once I had it, I found that it was actually quite comfy for me the way it was, so I forgot about them.
 
KingCobra;467632 said:
I would like a sleeve that would fit the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] and is somewhat durable
Click to expand...

On order sir! Perhaps later this month or the beginning of the new year.
 
26-12-'11
I completely removed the foam padding from the BathmateG.
I did an experiment today with something that perhaps can replace the sleeve for the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words].
Experiment went well! No leaks, good pressure!!! The BathmateG only feels slightly harder against the body.
I will do some more tests to confirm the effectiveness of my mod.
 
28-12-'11
Did the same setup again.
Today there was minor leakage. I believe the incorrect placement of the BathmateG on my body caused this (BathmateG was a somewhat more to the left).
Suction was good, but a little less than on 26-12.
I need to test the setup some more before posting it. It's not really a setup, it's a minor modification :cool:.
 
10-01-'12

Glad [words=http://www.mattersofsize.com/join-now.html]MOS[/words] is up and running again!
I notice that I was measuring wrong. I used to measure more towards the side, which gave me a BPFSL of 22,5 cm.
So now I do it correctly and place the ruler in middle of my base, which gives me a BPFSL of 21,5 cm.
I measured my BPenis EnlargementL with correct ruler placement during a masturbation session today and it was over 20 cm and I wasn't even pressing the ruler in!
Once I reach 21 cm BPenis EnlargementL, I'll shoot a pic :cool:.

I will post my BathmateG mod very soon!
 
19-01-'12
My gf already said that I have a big dick (little over 8"x6"). She is scared of it and don't know if it will fit when we have sex :P.
I don't care about that, I still want to grow more! Btw she does not know that I do Penis Enlargement. She will notice eventually...

Didn't do any proper Penis Enlargement for a week :(.
I'm still in the shared house and have to keep my Penis Enlargement on low profile, but that is no excuse!

I want to grow, so I have to work for it! Back to business!
I want to reach 10" BPenis EnlargementL , my final length goal, before the winter of 2013. I know it is possible with my routine, IF I'm consistent with it!
After this I will totally focus on girth.
 
20-01-'12

I started again just like announced yesterday! Was only a break of a week, but it is still too much.
The reason I post this is for you all to get to Penis Enlargement now. Don't wait for a magical moment... start now!

I'm doing Penis Enlargement for 4 years and have gained about 1.7" in length and 1" in girth. Take note that I have not be consistent with Penis Enlargement over that time, you know how it goes on, off, on, off. MY GAINS are personal, meaning that people could gain more or less in this time period. YOU ARE THE WEAKEST LINK, NOT YOUR Penis EnlargementNIS!
You will reach your goals by working consistently and smart!!! Everyone with sufficient Penis Enlargement experience can come up with a routine of good potential, less people can be consistent and work hard enough to see the fruits of gains! You can do it, do not give up my [words=http://www.mattersofsize.com/join-now.html]MOS[/words] brothers!!!
 
30-01-'12

I'm reaching over 21 cm in the BathmateG at 15 min, I didn't go for 20min today. I know and I feel that I'm growing.
The only thing I do is manual stretching sets spread out during the day and BathmateG on occasion.

I'm in the same financial and housing position. I still feel like accelerating my length gains.
Penis Enlargement is all about improvising and creativity. Accept the situation and work with it!
Night is the only real private time i have. This gave me an idea to create an [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ANS[/words]-device which might increase my gains. It could take a while though, because I'm doing everything in stealth and I don't have much experience in assembling this kind of shit myself.
I honestly feel like a Penis Enlargement ninja sometimes :P
 
07-02-'12

I'm almost done with the construction of my [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ANS[/words] device. I try to implement the [words=http://TLCTugger.com/MOS]VLC[/words]-tugger in an [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ANS[/words] environment. The device doesn't look high tech or special. I assembled it with very cheap parts, but I DO believe that it will do the job! That is all that matters to me.
I haven't done much Penis Enlargement lately, however surely enough for maintenance.
 
07-03-'12

My [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ANS[/words] device is still in the making. I got a shitty saw and it takes ages, plus I didn't invest enough time.
I did even less Penis Enlargement as last month :(((. I lost temporary gains from the beginning of the year... I was almost 21 cm :(((.
I'm undergoing a lot of changes lately and Penis Enlargement gets neglected.
Anyway I will try to pick it up again and keep you guys updated. I'm currently aiming for 3x15 min. manual stretching a day.
 
Hey KC, just checking in- sorry to hear about your Penis Enlargement this month. Good luck with your [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ANS[/words], I think that could be the next step in Penis Enlargement.

Solid
 
KingCobra;469694 said:
19-01-'12
My gf already said that I have a big dick (little over 8"x6"). She is scared of it and don't know if it will fit when we have sex :P.
I don't care about that, I still want to grow more! Btw she does not know that I do Penis Enlargement. She will notice eventually...

Didn't do any proper Penis Enlargement for a week :(.
I'm still in the shared house and have to keep my Penis Enlargement on low profile, but that is no excuse!

I want to grow, so I have to work for it! Back to business!
I want to reach 10" BPenis EnlargementL , my final length goal, before the winter of 2013. I know it is possible with my routine, IF I'm consistent with it!
After this I will totally focus on girth.
Click to expand...

I'm a fan of your thread, Kingsnake.
What is your length routine, if you don't mind me asking? I've been shorted by nature in the length department and it's very important to me to gain length. Thanks!
 
You must log in or register to reply here.
Back
Top