Penimaster pro

DLD,
Best of luck with your situation. Sounds like you're self-aware and using what your mind/body gives you to your advantage.

Off topic, with regards to the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]pmp[/words], I'm feeling a bunch of pain on the area right before e ridge. It's specific to the top part (facing the belly). It feels like that's the area that's taking much of the load of the tension, and in fact I've got some discoloration right there from my skin stretching. Anyone have a similar issue or know of what I can do to resolve this issue? I think that if I can manage to somehow alleviate this pain, I can get a lot more hours in.
 
Papi Champagne;514295 said:
Feel free to ignore posts like that or that have a ton of bullshit links.
Forum gets spammed occasionally
Click to expand...

Just report the fucks, I will snipe them out
 
CaptainCaveman;514189 said:
DLD,
Best of luck with your situation. Sounds like you're self-aware and using what your mind/body gives you to your advantage.

Off topic, with regards to the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]pmp[/words], I'm feeling a bunch of pain on the area right before e ridge. It's specific to the top part (facing the belly). It feels like that's the area that's taking much of the load of the tension, and in fact I've got some discoloration right there from my skin stretching. Anyone have a similar issue or know of what I can do to resolve this issue? I think that if I can manage to somehow alleviate this pain, I can get a lot more hours in.
Click to expand...

This is where it hurts me too, especailly when I'm taking it off, but it only starts to hurt after 2 hours of wearing the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words]. I take it off for anywhere from 2-30 minutes and it's fine. I find wearing the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] all the time as much as possible, as well as doing manual stretches throughout the day, whenever you take off the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] helps build your tolerance. When you have days off, that's when you get sensitive again.
 
If you do not have any [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words], is it worth getting the entire [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PeniMaster Pro[/words] package or get the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words] and order the head unit from [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PeniMaster[/words]? Are the other components of the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PeniMaster[/words] good quality like the base and rods etc??
 
MikeShlort;514471 said:
This is where it hurts me too, especailly when I'm taking it off, but it only starts to hurt after 2 hours of wearing the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words]. I take it off for anywhere from 2-30 minutes and it's fine. I find wearing the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] all the time as much as possible, as well as doing manual stretches throughout the day, whenever you take off the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] helps build your tolerance. When you have days off, that's when you get sensitive again.
Click to expand...

Yea, mine starts to really hurt at the 2 hour mark also. Except that when I take a break, I can only put it on for shorter and shorter amounts of time. Even then, I don't want the tension to be directed at that area more than the entire length of my penis. It would be nice to know how to redirect the force throughout the shaft.
 
CaptainCaveman;514504 said:
Yea, mine starts to really hurt at the 2 hour mark also. Except that when I take a break, I can only put it on for shorter and shorter amounts of time. Even then, I don't want the tension to be directed at that area more than the entire length of my penis. It would be nice to know how to redirect the force throughout the shaft.
Click to expand...

It's not that the force is on that point, that's just the point that is rubbing against the plastic ridge of the head piece. Try pushing your head into the headpiece as you suck on the hose. If you're using the hand ball pump, that could be your problem. I don't think it gives nearly enough suction to get in there good. I use the hose.
 
gtsgts;514488 said:
If you do not have any [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words], is it worth getting the entire [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PeniMaster Pro[/words] package or get the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words] and order the head unit from [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PeniMaster[/words]? Are the other components of the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PeniMaster[/words] good quality like the base and rods etc??
Click to expand...

I have both and honestly, everything about the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] is better quality than the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words], The main differences of course are the head piece, also the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] rod attachment snaps onto the rods from the bottom when the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] you have to compress the rods and stretch your penis way out to get the rods into the attachment which can be a bit of a pain and hassle if you are trying to use more bars to get a better stretch in the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words], but on the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] you cant lock down the screws to stay extended straight out like the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] can but I usually extend while sitting down to make sure I keep it in the position I want and I use the knee strap throughout the day for about 4 hours.
 
MikeShlort;514511 said:
It's not that the force is on that point, that's just the point that is rubbing against the plastic ridge of the head piece. Try pushing your head into the headpiece as you suck on the hose. If you're using the hand ball pump, that could be your problem. I don't think it gives nearly enough suction to get in there good. I use the hose.
Click to expand...

I have the pump ball and the hose but I prefer the pump much more. The hose just doesn't work for me. But I tried putting more of my shaft in and it seemed to make my glans go numb due to lack of blood. I'm thinking that I may have been overdoing it with the tension. Last night I tried with a lighter load and I felt much less pain. Slow and easy.
I'm curious...have you tried twisting your shaft and putting the headpiece into the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] with the bottom of your glans facing up? I think I'm gonna try that and see how it works and if it reduces some of the pain in that area.
 
Oh, ya, I never go with hard tension on the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words]. I like to keep it in that loose, jelly state. If I used too much tension, it's just thin and stretched tight. I don't think that will benefit me any, probably just lead to over training.

No I haven't thought of that but it's a cool idea, it may even give you a different stretch
 
So I was going through my Penis Enlargement gear and decided to take out my X4 for a try. It turns out that the stretch I feel from extending in this thing is much stronger than the one I feel when I have the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] on. I hate to admit it but its true. Now the question is which one I can leave on for a longer amount of time. I remember the constriction from the X4 used to make my glans go cold and blue after about 40 minutes. With the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] though, I get a sharp pain on the part right before the ridge of the top of ky penis so I can't wear it for more than an hour without too much pain. Given what I know so far, I would think it would be more beneficial to extend with the X4 if I'm getting more stretch for about the same amount of time. I'm gonna keep tweaking and see....in the meanwhile, I just wanted to share.
 
The reason is the penis master rod [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] only goes up to 1100 grams the 4x goes up to 1800 grams [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] I think goes up to 1500 you can go to auto [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] like I did and get even heavier springs 5 lb =2268. Grams

1 lb =453.6 grams
2 lb=907.2. grams
3 lb=1360.8 grams
4 lb=1814.4 grams
5 lb=2268. Grams

I can wear my pro for 2 hrs with out to much issue on the first line at 5 lb springs
first line on [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words]=567grams
Second line 1134 grams
If that helps
 
Last edited:
Just remember its time over tension. So less tension more time. More tension less time. I have also found that once you hit a certain point I assume it is we're you have created the micro tears you will get more retraction I used to get this when I was using the old head piece with noose and I could not extend as far as I used to. I am assuming it is because at that point as I slept my penis the penis was retracting and healing in that state. I think the main reason this is not an issue is because with the pro we can stretch massive amount of time and DLD [words=http://www.mattersofsize.com/forum/showthread.php?64036-My-Best-Work-Ever-Penis-Enlargement-will-Be-Changed-Forever-gt-gt-Gain%20inches%20with%20SRT-Theory-and-Routine]SRT[/words] method by keeping it extended during sleep has solved the retraction issue.
 
Thanks Diesel. That's a good reminder. I checked the X4 website and their regular springs go up to 1500 grams, but they have the heavy duty ones that they sell that go up to 2100 grams. Or there's always the monkeybar springs like you mentioned. As far as the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words], I don't thing springs with higher tension would work for me because I have trouble using higher tension on my original springs without too much pain. I've referenced this in prior posts but for the sake of clarity, the pain I have is located right behind the ridge on the top of my penis. It's pretty bad and its causing extra skin to form there which doesnt look so great. The other concern I have is that I have yet to find a post by anyone here on this thread (with the exception of dickleaker) who has experienced actual gains using this device. I'm not saying the thing doesn't work but I am concerned about its true functionality.
 
So my [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]pmp[/words] pro arrived about 2 weeks ago, i bought the complete set thinking i wanted to have several options to extend during the day, and completely convinced that the complete set would bring both the pump ball and the hose aplication system... Well lets just say my [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]pmp[/words] pro is gathering dust, i regret not taking the rime to see if the complete set came with the hose system, and i regret even more not having ordered it as an accesory in dlds [words=http://www.mattersofsize.com/join-now.html]MOS[/words] discount with like 32 euros worth in accesories for the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]pmp[/words] pro. It has been impossible for me to put the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]pmp[/words] pro on with just the pump ball system, i hace read the manual, watched the cd with al l the videos, tried diesels technique to put it on and ecrn combining it woth dickleakers tip to leave it insise dor about 30 seconds for the head to expand creating enough vacuum, but to no avail. Ehrn i can finally insert my glans into the unit and wait a bit, they slip out extremely easy ��. I am soo frustrated noe, and still waiting in the meantime for my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x 30[/words] to arrive...
 
Raf;515890 said:
So my [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]pmp[/words] pro arrived about 2 weeks ago, i bought the complete set thinking i wanted to have several options to extend during the day, and completely convinced that the complete set would bring both the pump ball and the hose aplication system... Well lets just say my [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]pmp[/words] pro is gathering dust, i regret not taking the rime to see if the complete set came with the hose system, and i regret even more not having ordered it as an accesory in dlds [words=http://www.mattersofsize.com/join-now.html]MOS[/words] discount with like 32 euros worth in accesories for the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]pmp[/words] pro. It has been impossible for me to put the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]pmp[/words] pro on with just the pump ball system, i hace read the manual, watched the cd with al l the videos, tried diesels technique to put it on and ecrn combining it woth dickleakers tip to leave it insise dor about 30 seconds for the head to expand creating enough vacuum, but to no avail. Ehrn i can finally insert my glans into the unit and wait a bit, they slip out extremely easy ��. I am soo frustrated noe, and still waiting in the meantime for my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x 30[/words] to arrive...
Click to expand...

When you get your glans in and the pump ball no longer inflates back up, keep squeezing the pump to try to fight and work more air back in for another pump. If all else fails seriously just order the hose kit it's amazingly easy, effective, and time efficient.
 
Here's a very useful piece of information for [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] owners:

I use the hose attachment. The other day, my [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] stopped working. It would not keep suction, and my penis would come out of the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] head after like 10 minutes. I assumed it was probably a leak in the hose that is attached to the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] head because the sluice and diaphragm were relatively new. But when I tested it out without my penis in it, it still gave enough suction to suck the diaphragm back and hold, so I decided to test it out.

I changed the sluice, because the existing sluice was becoming ratty. Still happened. So I changed the diaphragm. Still happened. So then I knew it for sure that it indeed had to be the valve that screws onto the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] head piece. I looked at the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] head piece for cracks, and determined that it was in good condition.

So after two days of messing around with it, a tear in the hose finally became visible. At first, there was no visible tear, so I was not completely sure it was the hose.

At first, I was pissed, because I assumed I would have to wait for a new valve piece to be sent to me under warranty. But then I noticed that the small hose piece that gets plugged up by the stopper can actually be taken off the valve. So I took it off and threw it away.

I noticed that the attachment hose is the exact same diameter, so I placed the end that didn't have the pin in it onto the metal nub of the valve, cut an appropriate length from my attachment hose and it was all fixed.

I've probably had the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] for over 3-4 months now, but to be fair, I take it off and on a lot throughout the day and I wear it under my pants at work, so it does get a ton of wear. It's good that I can fix the hose piece myself once it tears on the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] head, but I realize eventually the attachment hose is going to be too short for me to use it to put on the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] head.

Luckily, the pin for the attachment hose also comes out, so if I can find a store that carries that material of hose and same diameter, I can just easily replace the hose myself without having to deal with the company and wait for a replacement to be sent. I am sure a foot of that hose would cost me 50 cents.

Maybe I could find it at a plumbing store or something. Not sure what that type of hose would be used for in industry. Any guesses from anyone?

Well, hopefully this helps someone out if they encounter the same problem I had: loss of suction from the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] using the hose kit.
 
ColeParmer, McMaster- Carr, Amazon, and google for rubber or pvc tubing. You'll need to get out your ruler & measure that green hose, and be prepared to buy a roll.

specs:
Hose application system
(Item no. ZPMP-002 - accessories)
Diameter: 3mm
Length: 500mm
Weight: approx. 12g
Material: metal, plastic (PVC)
 
Last edited:
We have some very nice videos and photos coming up for the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PeniMasterPro[/words] and [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PeniMaster[/words]. W are doing studio work all week.
 
Dangler;515947 said:
ColeParmer, McMaster- Carr, Amazon, and google for rubber or pvc tubing. You'll need to get out your ruler & measure that green hose, and be prepared to buy a roll.

specs:
Hose application system
(Item no. ZPMP-002 - accessories)
Diameter: 3mm
Length: 500mm
Weight: approx. 12g
Material: metal, plastic (PVC)
Click to expand...

Wonderful, thank you Dangler
 
Another thing to my fellow canadians who've ordered this: did you have to pay duty on this when it arrived? if so how much and what if anything did it say about the contents of the package on the box?
 
magicjohnson;517521 said:
Another thing to my fellow canadians who've ordered this: did you have to pay duty on this when it arrived? if so how much and what if anything did it say about the contents of the package on the box?
Click to expand...

I don't recall having to. It was discrete.
 
Just ordered the upgrade kit.

I really hope this is all it's cracked up to be. I've tried every other way of extending from the noose to the comfort strap, to the velcro strap to the [words=http://TLCTugger.com/MOS]vlc[/words] [words=http://TLCTugger.com/MOS]tugger[/words] and all of them felt so uncomfortable to me that i didn't get any results.
 
magicjohnson;517721 said:
Just ordered the upgrade kit.

I really hope this is all it's cracked up to be. I've tried every other way of extending from the noose to the comfort strap, to the velcro strap to the [words=http://TLCTugger.com/MOS]vlc[/words] [words=http://TLCTugger.com/MOS]tugger[/words] and all of them felt so uncomfortable to me that i didn't get any results.
Click to expand...

It's quite comfortable but I think there may be issues with losing suction and a bit of slippage. However, if you use the hose attachment and make the suction very strong there should not be much slippage.
 
CaptainCaveman;515713 said:
Thanks Diesel. That's a good reminder. I checked the X4 website and their regular springs go up to 1500 grams, but they have the heavy duty ones that they sell that go up to 2100 grams. Or there's always the monkeybar springs like you mentioned. As far as the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words], I don't thing springs with higher tension would work for me because I have trouble using higher tension on my original springs without too much pain. I've referenced this in prior posts but for the sake of clarity, the pain I have is located right behind the ridge on the top of my penis. It's pretty bad and its causing extra skin to form there which doesnt look so great. The other concern I have is that I have yet to find a post by anyone here on this thread (with the exception of dickleaker) who has experienced actual gains using this device. I'm not saying the thing doesn't work but I am concerned about its true functionality.
Click to expand...

hey captain caveman sorry to hear your having so many issues I'm not rally sure what to say other then maybe extending isn't your thing if your having pain at low tension rates. as for results i have made 95% of all my gains from [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extenders[/words] i started at bpel 6 now will as off 6 months ago when i measured i was 7.5 to 7.75 bpel depending on erection level. max i have ever been was 7.75 i won't measure till right after the new year.

im wondering why your getting skin growth behind glands are you putting to much suction and getting extra skin in the head piece? the reason i say this is that the head should be the only thing in the head piece and and the sluice is what helps keep the skin out but with to much tension you will trap extra skin inside the head piece. causing fluid build up and bunch up skin. i just don't get why else you would have skin growing only behind the shaft?
 
MikeShlort;517732 said:
It's quite comfortable but I think there may be issues with losing suction and a bit of slippage. However, if you use the hose attachment and make the suction very strong there should not be much slippage.
Click to expand...

I ordered the hose attachment with it. Damn, I'm pretty excited about this. I have a feeling this is gonna be way more effective for me than everything else I've tried. 8 inches here I come.
 
magicjohnson;517886 said:
I ordered the hose attachment with it. Damn, I'm pretty excited about this. I have a feeling this is gonna be way more effective for me than everything else I've tried. 8 inches here I come.
Click to expand...

Don't even bother with the pump ball unless you just want to for shits and giggles, the hose attachment reigns supreme. Make sure you play around with it for a while, different vacuum pressures and everything don't get discouraged by negative things you read on here. If there's a will there's a way and we all find our way at different times.
 
Nice job on your progress man! About the skin growth....I'll try to explain my understanding of it. I do the best I can to put the head in only, but there is the space inside the sleuce that also needs to be filled. That's the area where the skin right behind the ridge of the glans sits because thats the part of the penis directly bordering the glans. With that said, I've been switching it off between the X4 and the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] just to keep from getting any one area of contact from getting too sensitive. That seems to have helped and I've noticed some growth in my bpfsl due in part to me using it more, and also to making heating and manual stretching a part of the regimen.
 
MikeShlort;517732 said:
It's quite comfortable but I think there may be issues with losing suction and a bit of slippage. However, if you use the hose attachment and make the suction very strong there should not be much slippage.
Click to expand...

You get slippage I haven't had that issue with the pro.
 
Jaronimo;517907 said:
Don't even bother with the pump ball unless you just want to for shits and giggles, the hose attachment reigns supreme. Make sure you play around with it for a while, different vacuum pressures and everything don't get discouraged by negative things you read on here. If there's a will there's a way and we all find our way at different times.
Click to expand...

Like jaronimo said don't worry about the negative stuff everyone is different with this stuff you just have to find what works for u. I personally like the ball pump and don't use my tube but I like it as well but prefer the ball so to each there own just find the best way that works for u.
 
CaptainCaveman;517912 said:
Nice job on your progress man! About the skin growth....I'll try to explain my understanding of it. I do the best I can to put the head in only, but there is the space inside the sleuce that also needs to be filled. That's the area where the skin right behind the ridge of the glans sits because thats the part of the penis directly bordering the glans. With that said, I've been switching it off between the X4 and the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] just to keep from getting any one area of contact from getting too sensitive. That seems to have helped and I've noticed some growth in my bpfsl due in part to me using it more, and also to making heating and manual stretching a part of the regimen.
Click to expand...


Ok try this
1. Get slightly erect pull skin back so it's tight.
2 use the extra ring adapter they include this will allow you to feel when the head pops in once it clears that part stop suction.
3 pull head piece out with some tension pull shaft back slightly then with penis extended pull sluice ring back as it may bunch up.
I have had this happen to me at first it is over suction pulling the shaft in and skin bunches up behind glands. It is easy to do if you use the tube. Not the ball. I'm almost 100% sure this is the problem because when I started using the tube suction it happen a couple of times the I realized what I was doing I just kept sucking in air. Thus will also cause swelling and pain on the glans and behind the glands on the skin it will cause some fluid to be trapped in the shaft skin that got sucked in.
 
Last edited:
I've heard from both cut & uncut users who have had shaft skin sucked in. This is the shaft skin between the glans corona ridge and the abdomen. Even happens to me.
If you suspect some skin has creep-ed in, you can reduce vacuum a little, pull on the skin to draw it out, then increase vacuum if needed.
See if less lube is a help, of just adjust it as diesel and I have described.
Note to those who are restoring their foreskin....This is an excellent way to extend and increase coverage, just let the skin be pulled in and stretched by the glans chamber. Remove hourly to prevent edema/water build up.
 
For some guys having problems with ball suction I found that when a new diaphragm The ball has Insufficient suction but once you get the diaphragm, to full expand by just re applying suction from the ball till the diaphragm is fully pulled in and see through. Then allow it to sit there for a bit to take shape and this will allow easy suction from the ball which I believe give correct pressure not over pressure. Don't get me wrong there is less learning curve with the tube suction but I think this may be causing some issues with over suction causeing pain to the glands and extra skin being sucked into head piece when not wanted unless you are trying to increase skin like mentioned by dangler. Hope this helps.
 
diesel225;518206 said:
For some guys having problems with ball suction I found that when a new diaphragm The ball has Insufficient suction but once you get the diaphragm, to full expand by just re applying suction from the ball till the diaphragm is fully pulled in and see through. Then allow it to sit there for a bit to take shape and this will allow easy suction from the ball which I believe give correct pressure not over pressure. Don't get me wrong there is less learning curve with the tube suction but I think this may be causing some issues with over suction causeing pain to the glands and extra skin being sucked into head piece when not wanted unless you are trying to increase skin like mentioned by dangler. Hope this helps.
Click to expand...

i saw this and was pretty impressed. It seems to be the best point of the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PeniMaster Pro[/words].
 
Thanks for the tip diesel and Dangler. Making sure shaft skin doesn't get sucked in is something I will definitely tend to. In my case though, its not excess shaft skin that's a problem. It's the border between the glans and the shaft. Right under the hood of the ridge. There's no way to make sure that doesn't get sucked in because its located directly in between the glans and the shaft. I need to find a way to reduce the strain on that part because it seems to be bearing lots of the tension as it is resisting the pull of the glans chamber (and the ring inside). The only thing I can think of is reducing the tension. But when doing it on low tension (over the 3rd line), I just feel like I'm wasting time. On the bright side...using the X4 in conjunction with the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] is working out nicely. I definitely recommend switching it up to reduce potential irritation.
 
Supra;501766 said:
I dont like the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words], i tired it and it makes your penis head turn white for months..no thank you. [words=http://TLCTugger.com/MOS]VLC[/words] still the best
Click to expand...

Wow I would have thought you would have liked it. I never get any issues with the pro. Maybe give it a second chances reduce suction I use very little suction. I love the thing.

maybe you are to big for the head piece I think hey should make reg and larg size one size can't fit all.
 
Wearing the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] on highest tension with no pain :). Thanks to diesel for the great tip about removing shaft skin! And being patient. It pays to wait about 20 minutes before adding tension once strapped in.
 
FINALLLY.

I just got it to work, I ordered with the hose as well and I've tried both but for me the pump ball works way better. The hose doesnt work for me at all.
 
No problem man glad i could helped. Its funny how many times i have used a device and thought it didn't work put it away then take it out months later to see if i can make it work and some times a slight modification or different wrapping technique makes it usable.

For example when i used to use the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] i never thought of multiple short sessions to keep fluid build up down I stumbled on dld routine and it help out a lot but now i use [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]penomet[/words] so no need for short sessions. i think people try it for a little bit and then if it doesn't work perfect the first couple of times they figure its the device and not user error.

Again glad i could help.
 
i just added some 30 min hanging in with at albs try to hit it 2 times per day follow the grip types system hang 8lbs as they say this cause almost micro tears. so my thought is 1 hr hang per day 30 am 30 pm. will equal 3-4 hr of time over tension so if you hit 6 tour really at 8-10 hrs [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] max tension is 2.5 lbs or something close to this. so this would equal 3-4 hrs in time over tension at max tension.
 
Pretty cool kit I must say. I had so much fun doing all the tutorials for the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]Penimaster[/words] and seeing all the different ways of use. Good shit [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]Penimaster[/words]!
 
so tonight, I get a notification about post #1234, see below:

Dear Dangler,

im4u89 has just replied to a thread you have subscribed to entitled - [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]Penimaster pro[/words] - in the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PeniMaster Pro[/words] Penis Enlargement Forum forum of [words=http://www.mattersofsize.com/join-now.html]Matters of Size[/words] :: Free Penis Enlargement Forums and Exercises.

This thread is located at:
http://www.mattersofsize.com/forum/showthread.php?65239-Penimaster-pro&goto=newpost

Here is the message that has just been posted:
***************
Id say the whole head starts to kill after 3 hours. Ill definitely try less bars.
***************


There may also be other replies, but you will not receive any more notifications until you visit the forum again.

All the best,
[words=http://www.mattersofsize.com/join-now.html]Matters of Size[/words] :: Free Penis Enlargement Forums and Exercises

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Unsubscription information:

To unsubscribe from this thread, please visit this page:
http://www.mattersofsize.com/forum/...=160311&auth=3ba67e4ea9f0cf4dd4c4ee111ce922ea

To unsubscribe from ALL threads, please visit this page:
http://www.mattersofsize.com/forum/subscription.php?do=viewsubscription&folderid=all
 
Ordered a [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]penimaster pro[/words] complete set with the [words=http://www.mattersofsize.com/join-now.html]mos[/words] discount-ordered extra latex spares, lube, pulling force belt and tube suction fitting. Tried a number of times with much anguish but today it all came together and got in a one hour session. Onwards and upwards!
 
I've been scrolling through the forum was wondering if someone can give me mockup of the order, I should place? Also for maybe 1 year use what I should get.
Particularly the extras to buy like what is the hose system
and also the spare parts
I plan to get to the complete set
 
Last edited:
You must log in or register to reply here.
Back
Top