Ok this is my first week guys with [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] and I'm happy to say this thing is amazing as I said in my first post tho I didn't want to say to much on first post as I didn't want to speak to soon as you cant really base something on how good it is on one day of use how ever full week done and this thing is simply amazing no numbness or going cold and I can go as much as 3 hours no problem better still I can now bring my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] back in to play as I'm now finishing my [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] sessions by 9pm full 12 hours extending than [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] than clamp than wrap in extended pos where as before useing [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]sg[/words] it take me nearly all day a night to get 12 hours done and was never any time for [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] due to taking on and off and with soreness to the head. If any one has anything to ask me regarding [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] feel free to ask pace out
Penimaster pro
- Thread starter fonic
- Start date
-
- Tags
- 7 inches 8 inches 9 inch 9 inches autoextender average base girth beginner circulation cock ring cold glans condom cum discoloration dld blasters doublelongdaddy edging effective enormous equipment erect erection erections exercise exercises extender extending extreme fat pad flaccid foreskin forte gain gaining gains genetics girth gains glans grower growing growth hands hanging huge cock ide inner penis larger length gains libido load loads massive p.e painful penis penis growth penomet peyronies phallosan posts progress pump pumping pussy question recovery research results review routine sensations sensitivity sex short shrink shrinkage sizegenetics skin sleeve sleeves ssj stretch stretched stretcher stretching stretchy suction supplement support tender tension testicles thick tingling tugging uncircumcised vacuum wide workout wrap
Hey, sometimes when using the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words], my head doesn't fully stay in it. Part of the crown comes out of the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words]. It still has [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]traction[/words] and stretches the penis. I'm just curious if this is okay and if I should be making some sort of adjustments. Thanks.
Sezuki;558525 said:
Is it because you fill up the head piece entirely? If not, I'd say to try to draw your head in more and possibly use a spacer. Also, remember to put it on semi-erect, I always try to squeeze below the head to make it balloon as much as possible before drawing it in, then I look through the sluice to make sure the head is all the way in. Use the hose attachment if you're not already.
So I got my [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] yesterday, and so far it's been a catalogue of errors....
First and I don't know how I managed this one - I got the ball pump on and turned this way and that way and somehow I managed to turn the valve all the way off and it fell inside the green ball valve. So I had to hack at that with a screwdriver to prise the ball apart. Got the valve out and glued the ball over the nozzle again - and I can get suction with it but can't draw the glans in fully.
No problem, I'll try the hose, I thought - And I can suck my glans in no problem, but trying to seal the hose afterwards is a comedy of hands everywhere, tongue stuck to the end of the tube, pinching, pulling apart trying to fit the metal seal back in, thinking I need a third hand and then watching in dismay as just enough of the vacuum is lost that I slip back out.
Tried rings, but I then can't seem to suck hard enough to get in.
So far I feel like I've wasted my money and I'm just going to go back to strangling my glans to death with the noose on my old AndroPenis....
Any help would be appreciated, especially with tips on how to use and seal the hose...
Cheers
James
First and I don't know how I managed this one - I got the ball pump on and turned this way and that way and somehow I managed to turn the valve all the way off and it fell inside the green ball valve. So I had to hack at that with a screwdriver to prise the ball apart. Got the valve out and glued the ball over the nozzle again - and I can get suction with it but can't draw the glans in fully.
No problem, I'll try the hose, I thought - And I can suck my glans in no problem, but trying to seal the hose afterwards is a comedy of hands everywhere, tongue stuck to the end of the tube, pinching, pulling apart trying to fit the metal seal back in, thinking I need a third hand and then watching in dismay as just enough of the vacuum is lost that I slip back out.
Tried rings, but I then can't seem to suck hard enough to get in.
So far I feel like I've wasted my money and I'm just going to go back to strangling my glans to death with the noose on my old AndroPenis....
Any help would be appreciated, especially with tips on how to use and seal the hose...
Cheers
James
You just pinch the smaller green hose, which is attachted to the ball, below the hole where the long green hose/pin goes. Then you take out the green hose and put in the pin.
Also, over time, that small green hose that is attached to the ball will get a hole in it. Simply cut off a small piece from the long green hose to replace it.
Also, over time, that small green hose that is attached to the ball will get a hole in it. Simply cut off a small piece from the long green hose to replace it.
MikeShlort;561318 said:
I concur, play with it a little more and you'll figure it out, it's actually much easier than using a noose when you get the hang of it.
jcw1407;561314 said:
sorry you had so many issues it is just a quarter turn either way. there is a slight learning curve with the penis master pro but trust once you get it right you can pull harder with no slippage for much longer periods of time then with the noose.
some tips
1 new condom that attaches to the ball will usually be to strong to suck the glands in with the the ball right away o using the tube method is best till it loosens up.
2 most of the time i found that it is user error not really the product but not in every case. that being said give it some times and im sure you will find the sweet spot with the pump or the hose.
3 with the hose slowly suck pressure in as it is easier to create to much suction causing fluid retention and pain while removing the device.
i would rate the the penis master pro the number 2 penis tension [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] the number 1 in my mind due to tons of hrs in the device and comfort and ease of usage is the new [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]phallosan[/words] [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]forte[/words] best device hands down. but both devices work great and will get your to your goal. the noose are just torture and ill never go back. the noose is the model t of stretchers the pallosan [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]forte[/words] the bugatti the pro is a lambo.
loorgoEluse;562247 said:
About Jesus Christ?
B
bassman1
Guest
Just wanted to post a few helpful tips here regarding troubleshooting of [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]Penimaster Pro[/words]. I won't be coming back on and replying or posting a video - too busy. But I thought I'd put this out there for others.
I initially ordered the Andropenis and wore it for 4 weeks. Initial results were good (.5 in length gain likely just from ligament stretching). But there were a few times the noose cut off circulation to my glans and this is frightening. It isn't always easy to tell if it's falling asleep and I had to keep checking. I wanted to continue the program but wanted a different [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words]. The [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]Penimaster Pro[/words] seemed to have a better way of attaching, so I went ahead and ordered it along with some replacements of the diaphragm and sluice rings (all different sizes - they aren't that expensive).
I hated the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] for the first few days because I could not get the suction concept to work for me. I'm not an idiot when it comes to mechanical things, but the video they send makes it look so easy when it really is not. After a few days of struggling I figured out how to make it work. Here is what I learned for the benefit of others:
There are three different sizes of diaphragms and rings. The book does not really make it clear that you may need to mix and match them to get the best results.
In my case, I was having trouble to get the glans to draw all the way in using the average ring and diaphragm together. (Have read on here that others have had the same problem)
To solve the issue, think of the diaphragm and rings in this way:
The diaphragm controls the amount of suction draw you can get. It has nothing to do with creating a seal around the circumference of your unit.
The sluice ring controls the suction and seal around your unit - so this is really the most critical piece to match to your size.
Too tight and you can't get it in, or will cut off circulation if you do.
Too loose and you won't get a good seal and you will slip out after tension is applied.
So pick the sluice ring according to your girth (I was 4.5 inches average)
As for the diaphragm, I ended up using the large diaphragm because it stretches the most and will draw further into the piece and create more suction.
I think the large diaphragm would work well even for smaller guys.
Also, note that the bulb used to draw in air does not have very strong suction to begin with (I was able to get things working with this but it probably would be easier with the tube option)
Using this setup, I followed this procedure to get it to mount correctly:
1. Apply the large diaphragm and average sluice ring using instructions as provided in the manual (It takes a bit to get the hang of it, but it isn't too difficult)
2. Squeeze the suction bulb, then twist the gate open and release the ball - this will pull the diaphragm in as much as the bulb can do alone - then close the gate.
3. Squeeze the ball again, then twist to open the gate a second time - this time use your mouth to blow air into the diaphragm (yes your dick goes there, get over it!)
This will expand the diaphragm all the way to the wall of the chamber. Close the gate so the diaphragm stays all the way in.
4. Apply a very small amount of the lube to just the opening where you will have to pass through.
5. Stuff your glans into the chamber. You will need to use your finger to depress the glans so that air can pass OUT of the chamber around you as your glans goes in.
6. Once the entire glans is in - including a little of the shaft - squeeze the bulb halfway, open the gate, then squeeze just a little so the diaphragm releases and just starts pushing you back out.
You will need to use a finger to depress the shaft a bit so air can escape out around you as the diaphragm releases - otherwise it will just push you out of the chamber.
7. Once the diaphragm is touching the glans, remove your finger which is letting air out, then release the bulb so it draws you back in the rest of the way
8. Squeeze the bulb at the base, working it so it pulls as much air back in as possible - it probably will not return to its normal shape fully - which means you have a good suction.
9. Close the gate and remove the bulb.
You should now have a good application of the glans chamber and can use the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] or band.
Using this method, I have found the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] to be very comfortable in comparison to the noose [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words]. Additionally, the way tension is controlled with the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] is superior to the others I think.
Hope this helps others not get too frustrated. Wouldn't have taken time to post, if I didn't think this would really be helpful to others. Happy steady gains, guys.
I initially ordered the Andropenis and wore it for 4 weeks. Initial results were good (.5 in length gain likely just from ligament stretching). But there were a few times the noose cut off circulation to my glans and this is frightening. It isn't always easy to tell if it's falling asleep and I had to keep checking. I wanted to continue the program but wanted a different [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words]. The [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]Penimaster Pro[/words] seemed to have a better way of attaching, so I went ahead and ordered it along with some replacements of the diaphragm and sluice rings (all different sizes - they aren't that expensive).
I hated the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] for the first few days because I could not get the suction concept to work for me. I'm not an idiot when it comes to mechanical things, but the video they send makes it look so easy when it really is not. After a few days of struggling I figured out how to make it work. Here is what I learned for the benefit of others:
There are three different sizes of diaphragms and rings. The book does not really make it clear that you may need to mix and match them to get the best results.
In my case, I was having trouble to get the glans to draw all the way in using the average ring and diaphragm together. (Have read on here that others have had the same problem)
To solve the issue, think of the diaphragm and rings in this way:
The diaphragm controls the amount of suction draw you can get. It has nothing to do with creating a seal around the circumference of your unit.
The sluice ring controls the suction and seal around your unit - so this is really the most critical piece to match to your size.
Too tight and you can't get it in, or will cut off circulation if you do.
Too loose and you won't get a good seal and you will slip out after tension is applied.
So pick the sluice ring according to your girth (I was 4.5 inches average)
As for the diaphragm, I ended up using the large diaphragm because it stretches the most and will draw further into the piece and create more suction.
I think the large diaphragm would work well even for smaller guys.
Also, note that the bulb used to draw in air does not have very strong suction to begin with (I was able to get things working with this but it probably would be easier with the tube option)
Using this setup, I followed this procedure to get it to mount correctly:
1. Apply the large diaphragm and average sluice ring using instructions as provided in the manual (It takes a bit to get the hang of it, but it isn't too difficult)
2. Squeeze the suction bulb, then twist the gate open and release the ball - this will pull the diaphragm in as much as the bulb can do alone - then close the gate.
3. Squeeze the ball again, then twist to open the gate a second time - this time use your mouth to blow air into the diaphragm (yes your dick goes there, get over it!)
This will expand the diaphragm all the way to the wall of the chamber. Close the gate so the diaphragm stays all the way in.
4. Apply a very small amount of the lube to just the opening where you will have to pass through.
5. Stuff your glans into the chamber. You will need to use your finger to depress the glans so that air can pass OUT of the chamber around you as your glans goes in.
6. Once the entire glans is in - including a little of the shaft - squeeze the bulb halfway, open the gate, then squeeze just a little so the diaphragm releases and just starts pushing you back out.
You will need to use a finger to depress the shaft a bit so air can escape out around you as the diaphragm releases - otherwise it will just push you out of the chamber.
7. Once the diaphragm is touching the glans, remove your finger which is letting air out, then release the bulb so it draws you back in the rest of the way
8. Squeeze the bulb at the base, working it so it pulls as much air back in as possible - it probably will not return to its normal shape fully - which means you have a good suction.
9. Close the gate and remove the bulb.
You should now have a good application of the glans chamber and can use the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] or band.
Using this method, I have found the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] to be very comfortable in comparison to the noose [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words]. Additionally, the way tension is controlled with the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] is superior to the others I think.
Hope this helps others not get too frustrated. Wouldn't have taken time to post, if I didn't think this would really be helpful to others. Happy steady gains, guys.
hi guys,
planning to buy [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]penimaster pro[/words] but I have couple of question.
1. What version of [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] is the hose included?
2. What part usually breaks easily so I could order extras?
3. And also, what link should I click to save more?
4. Will it work if my flaccid girth is small? Around 1-1.25 inch in diameter?
5. Will this work as replacement for [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] in [words=http://www.mattersofsize.com/forum/showthread.php?64036-My-Best-Work-Ever-Penis-Enlargement-will-Be-Changed-Forever-gt-gt-Gain%20inches%20with%20SRT-Theory-and-Routine]SRT[/words]? And is it advisable to use it as a newbie/just starting out?
planning to buy [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]penimaster pro[/words] but I have couple of question.
1. What version of [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] is the hose included?
2. What part usually breaks easily so I could order extras?
3. And also, what link should I click to save more?
4. Will it work if my flaccid girth is small? Around 1-1.25 inch in diameter?
5. Will this work as replacement for [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] in [words=http://www.mattersofsize.com/forum/showthread.php?64036-My-Best-Work-Ever-Penis-Enlargement-will-Be-Changed-Forever-gt-gt-Gain%20inches%20with%20SRT-Theory-and-Routine]SRT[/words]? And is it advisable to use it as a newbie/just starting out?
1. What version of [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] is the hose included: The Kit we sell has the hose included along with everything else, it is the top of the line [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PMP[/words] kit.
2. What part usually breaks easily so I could order extras? Nothing, if there is any issue you are covered by our warranty.
3. And also, what link should I click to save more? for Discount use this link: https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en
4. Will it work if my flaccid girth is small? Around 1-1.25 inch in diameter? Yes, it will work with any size.
5. Will this work as replacement for [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] in [words=http://www.mattersofsize.com/forum/showthread.php?64036-My-Best-Work-Ever-Penis-Enlargement-will-Be-Changed-Forever-gt-gt-Gain%20inches%20with%20SRT-Theory-and-Routine]SRT[/words]? And is it advisable to use it as a newbie/just starting out? Yes, this is a perfect substitution for the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words].
If you have any other questions please ask.
DLD
2. What part usually breaks easily so I could order extras? Nothing, if there is any issue you are covered by our warranty.
3. And also, what link should I click to save more? for Discount use this link: https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en
4. Will it work if my flaccid girth is small? Around 1-1.25 inch in diameter? Yes, it will work with any size.
5. Will this work as replacement for [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] in [words=http://www.mattersofsize.com/forum/showthread.php?64036-My-Best-Work-Ever-Penis-Enlargement-will-Be-Changed-Forever-gt-gt-Gain%20inches%20with%20SRT-Theory-and-Routine]SRT[/words]? And is it advisable to use it as a newbie/just starting out? Yes, this is a perfect substitution for the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words].
If you have any other questions please ask.
DLD
^Thanks for providing the link, I clicked the link and selected the complete kit but I can't find the hose listed under the what's included in the kit section.
And also, does this include the pass to [words=http://www.mattersofsize.com/join-now.html]MOS[/words] PE section?
And also, does this include the pass to [words=http://www.mattersofsize.com/join-now.html]MOS[/words] PE section?
may I ask if can [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]penimaster pro[/words] hide the real price of the item when they ship it to reduce the customs tax that I will be paying?
commercial;684280 said:
Sorry for Off topic but I have the exact same question about [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] ?
The customs policy in my country makes this stuff for me +100 dollars just for the tax.
commercial;684280 said:
I am not sure what you mean? I know that there has never been a customs issue with [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]PeniMaster Pro[/words] so if that is a concern don't worry.
@BigBeardBig
I'm pretty sure they are declaring the actual value. I bought mine few years ago and customs charged me over 50 USD as it is revealed on the receipt outside the package.
I'm not sure if can I request to underdeclare the value.
I'm pretty sure they are declaring the actual value. I bought mine few years ago and customs charged me over 50 USD as it is revealed on the receipt outside the package.
I'm not sure if can I request to underdeclare the value.
commercial;684386 said:
Yeah,they probably wouldnt underdeclare the value.