Official -Bathmate- thread: discussions, questions, bring it in

[jizzim]

Day 2
A little sore but had to be done.
As i said i would i hit up a bout system
5 minutes pump
5 minutes Jelq
5 minutes pump
5 minutes Clamp (well adjustable cock ring)
10 minutes pump

Today EVEN BETTER
Even before using the Bathmate I had a 8.5" flaccid bone pressed stretch length (after a couple minutes warming up in the shower).
On a side note i dont know if its something i ate or something related to the Bathmate but later on after using the Bathmate I kept getting hard with little to no sexual thought:cool:.
So anyway as i said
Sore to start out but fought through.

The bout system worked well lessening the fluid build up.
The other good note to the bout system is you can keep at a higher pressure knowing you wont have to keep it there long.
SO I REALLY PUSHED IT TODAY.
Thanks for the tip DLD

Long story short...
ERECT BONE PRESSED LENGTH
Above 8.75
and Below 9" by a whisker
:s
My girth surprised me the most. (I have a pretty thin piece). so when i put it to my Bathmate measuring device i was pretty astounded I didnt make a note of it But WOW AGAIN.

I bought this without a real goal in sight. Apart from be able to know I am officially 8 inches when erect. But at this rate il be laughing when looking back in a month or so.

I have Already heard a few different techniques for use with the Bathmate.

We should make a thread for different techniques and programs for the Bathmate.

And I found myself a Good one

If the name hasant already been Used i call it the
MR FANTASTIC.

On my last bought in the last 2-3 minutes
i went to the pressure i could just about bare then similar to DLD'S manual plyometric stretches I then pumped once or twice Quickly more to Extend out an extra centimeter before quickly (within a sec or two) pressing the release valve.
I did this over and over watching myself move back and forth within that just bearable centimeter.

Obiously dont advice this for noobs.
But if you are to try it know your limitations.

 

[REDZULU2003]

Brilliant work

 

[john9000]

Hello everyone,

I thought I'd ask here instead of starting a new thread. Sorry if this has been answered before

I recently bought a Bathmate and have been using it for about a week, it's my first Penis Enlargement device and I'm new to Penis Enlargement excercise also..

Recently after a session I noticed that the head of the penis was darker in some places and now today the skin on the shaft had gotten darker on some spots as well. Why is this? Is it dangerous? Will it go away?

Cheers
John

 

[Demyx]

Right I have a quick question about my size and the Bathmate I am a little over 8 inches Length BP erect and about 6" girth and 6.3 base this means after sessions with the Bathmate I will grow to about 6.5 mid girth and 6.8 base will the regular Bathmate support this? or is it best to go with the bigger model?

 

[opa]

Right I have a quick question about my size and the Bathmate I am a little over 8 inches Length BP erect and about 6" girth and 6.3 base this means after sessions with the Bathmate I will grow to about 6.5 mid girth and 6.8 base will the regular Bathmate support this? or is it best to go with the bigger model?

bigger model

 

[Demyx]

bigger model

JUST curious mate do you yourself have the bigger model?

 

[REDZULU2003]

He wouldn't need the bigger model yet, your currently larger so take his advice and buy the X-40 if you want one.

 

[jizzim]

Right I have a quick question about my size and the Bathmate I am a little over 8 inches Length BP erect and about 6" girth and 6.3 base this means after sessions with the Bathmate I will grow to about 6.5 mid girth and 6.8 base will the regular Bathmate support this? or is it best to go with the bigger model?

Watch dlds new video on the Bathmate X-40

I maxed out the girth on it yesterday i got huge expansion so X-40 is your best bet.
Just hard to be obscure with it. the shit is huge.

Only problem is even with my X-40 model.
is the fact that the expansion and possible gains with the Bathmate
Is you wont stop till you fill the thing lool

 

[DLD]

Watch dlds new video on the Bathmate X-40

I maxed out the girth on it yesterday i got huge expansion so X-40 is your best bet.
Just hard to be obscure with it. the shit is huge.

Only problem is even with my X-40 model.
is the fact that the expansion and possible gains with the Bathmate
Is you wont stop till you fill the thing lool

I have another video coming tonight and it is HILARIOUS!

 

[Hydromax BathMate]

I was talking about the measuring device DLD said comes with the Bathmate

and I dont get it... stop printing out our posts?

Ah yes, I'm terrible sorry but that one has been discontinued due to customer complaints of paper cuts (not kidding). So a new version is on the way to the warehouse that is going to be sold very very little money and will be added first to the USA store, promise! Its made from plastic and hand polished for ultimate comfort (and no paper cuts) for your penis.

Agust

 

[Hydromax BathMate]

Yeah carbon footprint...BS. Look at all the plastic companies use to package stuff. You really think me recycling a few things of plastic is going to make a difference when these major companies package all their crap in the most difficult to recycle plastics?

Actually the EU is terrible, and we are now going to have to pay Carbon taxes... thus everything is being done to minimize any waste, including consumer packaging, everything being turned into recyclable paper (for printed matter), discontinued the printed manual for on-line manual only (that is going to be very much updated soon), shipping packaging recycled you name it.

The Bathmate is Recyclable Plastic Category 5, so it can be recycles with ease into other products if disposed of correctly. However, to make the best product, we use new plastics for the Bathmates (only the Bathmates) but everything else is recycled. The gaiter is made from synthetic rubber, not sure if that is recyclable, gotta check.

If the politicians had their way, no company would survive the Carbon tax, but we are lucky because we started implementing our Environmental policy some time ago and going for the ISO 14000 certificate this summer I believe.

Agust

 

[DLD]

Actually the EU is terrible, and we are now going to have to pay Carbon taxes... thus everything is being done to minimize any waste, including consumer packaging, everything being turned into recyclable paper (for printed matter), discontinued the printed manual for on-line manual only (that is going to be very much updated soon), shipping packaging recycled you name it.

The Bathmate is Recyclable Plastic Category 5, so it can be recycles with ease into other products if disposed of correctly. However, to make the best product, we use new plastics for the Bathmates (only the Bathmates) but everything else is recycled. The gaiter is made from synthetic rubber, not sure if that is recyclable, gotta check.

If the politicians had their way, no company would survive the Carbon tax, but we are lucky because we started implementing our Environmental policy some time ago and going for the ISO 14000 certificate this summer I believe.

Agust

I received my larger Bathmate 2 days ago and I do not miss the colorful box at all, I was happy to see that there was no waste. The bag it comes in is a high quality canvas and was plenty for packaging. The only difference was the inner box, see no point in having it.

 

[elveneyes88]

I've been wondering about something that I've seen the 4 times I've used the Bathmate so far (once every day). Apart from the feeling like my dick is gonna explode (not really explode, but you know ^^) It looks like the girth is greater the closer it is to the body when I'm using my Bathmate.
Is this the case for you other users, or is it only due to the refractive index of the plastic and water?

 

[hamlet30]

i've just received mine. didnt even know it was sitting in the mail box. lol. check the track and said it was delivered and i went out and checked and there it is. gonna give it try soon keep yall posted. gonna read the manual first.

 

[DLD]

i've just received mine. didnt even know it was sitting in the mail box. lol. check the track and said it was delivered and i went out and checked and there it is. gonna give it try soon keep yall posted. gonna read the manual first.

Fuck the manual...Strap it on and get your Bathmate on! Joking

 

[REDZULU2003]

I have done something new this evening in my Bathmate session that was just dynamite. When you enter the Bathmate, do your session as normal with your scrotum & testicles tucked away down so they aren't in the tube. After 10 minutes (1/2 way point) gently push the testes through the opening of the pump one by one and add more suction.

Do this for the remainder of the 10 minutes and it can help get you extra increases in length and its not false length either from the ball sack, but because they aren't adding resistance if you like, they are just sitting inside the tube with your penis and so the whole vacuum can just go straight upwards in the tube.

Sometimes I have found my balls and scrotum hurting as the pressure has increased and the size bigger. This because they are acting as a defence, they don't want to go inside the tube and so they are hanging on and hence the pain. So just throw them inside but best to do it the past 10 mins or even 5 mins if you prefer. I say this because if you do it at the start (I experimented) you will find your penis becomes oddly shaped from the sheer mass inside the tube and it doesn't look right at all, so let it get worked out and than add them inside.

I saw no ill effects whatsoever afterwards from doing this and no fluid, bloat or anything else to the testes or scrotum.

Something to bear in mind is I use the X-40 model, so the X-40 may be trickier to do this on but if you want to try something different than go for it and have a crack.

Also give this method a try guys ^^^

 

[phaseshift]

you mentioned you can get extra length with this method is that for the penis itself or are you talking about getting length on the ball sack, im confused!

 

[DLD]

you mentioned you can get extra length with this method is that for the penis itself or are you talking about getting length on the ball sack, im confused!

I think it is the relaxation of the scrotum that allows for the extra skin.

 

[REDZULU2003]

you mentioned you can get extra length with this method is that for the penis itself or are you talking about getting length on the ball sack, im confused!

That's the penis itself, you don't stretch your ball sack any further. What's happening is the balls are going inside the tube and allowing a perfect suction on the entire penis, instead of having that slight gap to allow the balls to hang down .. hope this makes sense. Think about putting a cucumber in the Bathmate ... it would be covered whole and nothing sticking out ... now put a sponge underneath it and the cucumber on top with the Bathmate now covering it .. you will find the sponge sticks out like the balls do and essentially your not targeting every single piece of penis that you can, just my opinion.

I think it is the relaxation of the scrotum that allows for the extra skin.

My scrotum doesn't feel any more relaxed than usual when doing it. All you do is push the scrotum and balls inside the tube and apply suction after about 10 minutes of pumping normally to get the penis a nice pump so not to have a distorted size otherwise. The area than sites right at the bottom out the way and allows the penis to be sucked further into the tube, your balls and scrotum are not wanting to go inside the tube like normal because they have no need to and so you are cutting off the weak link here to possibly more gains.

 

[DLD]

Oh, I see! I think I can do this with my larger model. Thanks Red.