Munto's PE Journey:)
- Thread starter Munto
- Start date
-
- Tags
- 8 inch average bathmate circulation cock ring cockring condom discoloration dld blasters doublelongdaddy edging effective equipment erect erection erection quality erections exercise exercises extender extreme fat pad flaccid foreskin gain gaining gains genetics girth girth gains growing growth hanging inches inner penis jelq jelqs kegel larger length gains mandingo stretch massive masturbate masturbating methodology penis penomet posts progress pump pumping question results reverse kegel review routine sex short shower shrink ssj stretch stretched stretching suction support testicles thick tingling veins viagra wide workout wrap x20
Really? I though there would be many more at or above my level of consistency. Especiallly since there are times, like something happening in real life, where I cannot do what I wanted to do.
Friday 17.07
2x22min Hanging (3.7kg 3.5kg)
2x60min Extender
Sleeve
Saturday 18.07
3x22min Hanging (3.5kg 3.2kg 3kg)
2x60min Extender
Sleeve
Sunday 19.07
2x22min Hanging (3kg 3.2kg)
3x60min Extender
Sleeve
5x5x2 Clamping, Bathmate Stretches
Very nice update. I'm very happy that you're being so consistent, and I know if your consistency, you're gonna get where you wanna go
Monday 20.07
3x22min Hanging (3.2kg 3.5kg 3.7kg)
2x60min Extender
ADS (1x1-2h)/Sleeve
1x5min Vac-Hanging (2.5kg)
Tuesday 21.07
4x23min Hanging (4.2kg 4kg 3.7kg 3.5kg)
2x60min Extender
ADS (1x1-2h)/Sleeve
1x5min Vac-Hanging (2.5kg)
Wednesday 22.07
4x23min Hanging (3.7kg 3.5kg 3.2kg)
2x60min Extender
Sleeve
3x22min Hanging (3.2kg 3.5kg 3.7kg)
2x60min Extender
ADS (1x1-2h)/Sleeve
1x5min Vac-Hanging (2.5kg)
Tuesday 21.07
4x23min Hanging (4.2kg 4kg 3.7kg 3.5kg)
2x60min Extender
ADS (1x1-2h)/Sleeve
1x5min Vac-Hanging (2.5kg)
Wednesday 22.07
4x23min Hanging (3.7kg 3.5kg 3.2kg)
2x60min Extender
Sleeve
Thursday 23.07
2x23min Hanging (3.2kg 3.5kg)
2x60min Extender
Sleeve
Friday 24.07
3x23min Hanging (3.5kg 3.7kg 4kg)
2x60min Extender
1x5min Vac-Hanging (2.5kg)
Sleeve
5min Warm-up
10min DLD-Blasters
5min Bundled Stretches
20min Basic Stretching
5min Testicle Health Massage
Saturday 25.07
3x23min Hanging (4kg 3.7kg 4kg)
1x90min Extender
1x30min Extender
Sleeve
Sunday 26.07
2x23min Hanging (4kg 4kg)
2x60min Extender
Sleeve
5x5x2 Clamping, Bathmate Stretches
2x23min Hanging (3.2kg 3.5kg)
2x60min Extender
Sleeve
Friday 24.07
3x23min Hanging (3.5kg 3.7kg 4kg)
2x60min Extender
1x5min Vac-Hanging (2.5kg)
Sleeve
5min Warm-up
10min DLD-Blasters
5min Bundled Stretches
20min Basic Stretching
5min Testicle Health Massage
Saturday 25.07
3x23min Hanging (4kg 3.7kg 4kg)
1x90min Extender
1x30min Extender
Sleeve
Sunday 26.07
2x23min Hanging (4kg 4kg)
2x60min Extender
Sleeve
5x5x2 Clamping, Bathmate Stretches
Monday 27.07
3x23min Hanging (4kg 3.7kg 4kg)
2x60min Extender
1x10min Vac-Hanging (1.25kg)
ADS (1x1-2h)/Sleeve
Tuesday 28.07
3x23min Hanging (4kg 3.7kg 3.5kg)
2x60min Extender
ADS (1x1-2h)/Sleeve
1x10min Vac-Hanging (1.25kg)
Wednesday 29.07
3x23min Hanging (3.5kg 3.7kg 4kg)
2x60min Extender
ADS (1x1-2h)/Sleeve
3x23min Hanging (4kg 3.7kg 4kg)
2x60min Extender
1x10min Vac-Hanging (1.25kg)
ADS (1x1-2h)/Sleeve
Tuesday 28.07
3x23min Hanging (4kg 3.7kg 3.5kg)
2x60min Extender
ADS (1x1-2h)/Sleeve
1x10min Vac-Hanging (1.25kg)
Wednesday 29.07
3x23min Hanging (3.5kg 3.7kg 4kg)
2x60min Extender
ADS (1x1-2h)/Sleeve
Thursday 30.07
3x23min Hanging (4kg 3.7kg 3.5kg)
1x60min Extender
ADS (1x30min)/Sleeve
For the last couple of days it's very hard to impossible to get a proper vacuum again. I already tried different cups, squeezing the shaft tightly (right where the sleeve ends) together so no air could come through, but as soon as I stop pumping I loose the vacuum pretty much 8-9/10 times.
I tried the pump on it's own on parts of my skin, working fine, cleaned everything properly (sleeves, cup) to no avail.
3x23min Hanging (4kg 3.7kg 3.5kg)
1x60min Extender
ADS (1x30min)/Sleeve
For the last couple of days it's very hard to impossible to get a proper vacuum again. I already tried different cups, squeezing the shaft tightly (right where the sleeve ends) together so no air could come through, but as soon as I stop pumping I loose the vacuum pretty much 8-9/10 times.
I tried the pump on it's own on parts of my skin, working fine, cleaned everything properly (sleeves, cup) to no avail.
I have a feeling there's a micro leak in the sleeve because of the sleeve's folding or rolling. Try to move the sleeve up a bit more, covering at least 3cm over the vacuum cup. Near the top of the vacuum cup, seal the sleeve's opening with a wide band of somekind, such as a cut out of a smaller sleeve, rubber band, or even just your hand, if you have one to spare during pumping. The seal for your skin should be nominal without leakage. But I can be wrong. Worst case, either send me a photo privately to evaluate if you're shy, or post it here.
Very smart post.Thank you so much for your contributions
I did replace the the old sleeve, so that one should be fine. But I'll try adding a rubber band again, to see if that works. For now I can use it as an ADS at least a bit, since that has less tension, and at least works more often.
Saturday 01.08
2x23min Hanging (3.7kg 3.7kg)
ADS (2x1-2h)/Sleeve
Sunday 02.08
2x23min Hanging (4kg 3.7kg)
5x5x2 Clamping, Bathmate Stretches
ADS (1x1-2h)/Sleeve
Monday 03.08
4x23min Hanging (3.7kg 3.5kg 3.2kg 3kg)
1x60min Extender
ADS (1x1-2h)/Sleeve
I tried a new thicker outer sleeve with a rubber band and it is still barely working.
I tested it with a cheap blue cup I got on Aliexpress, and that one is working at least a bit better.
Now, because it is low quality I cannot use the same tension.
I attached an image of the sleeves/cups I use in their order.
I'm thinking of trying the "water trick" again, but I'm afraid I might get another blister.
Edit: The last sleeve with the ruber band goes over both the cup + grey sleeve
2x23min Hanging (4kg 3.7kg)
5x5x2 Clamping, Bathmate Stretches
ADS (1x1-2h)/Sleeve
Monday 03.08
4x23min Hanging (3.7kg 3.5kg 3.2kg 3kg)
1x60min Extender
ADS (1x1-2h)/Sleeve
I tried a new thicker outer sleeve with a rubber band and it is still barely working.
I tested it with a cheap blue cup I got on Aliexpress, and that one is working at least a bit better.
Now, because it is low quality I cannot use the same tension.
I attached an image of the sleeves/cups I use in their order.
I'm thinking of trying the "water trick" again, but I'm afraid I might get another blister.
Edit: The last sleeve with the ruber band goes over both the cup + grey sleeve
Attachments
Last edited:
It looks good to me and keep in mind we are making new molds for our sleeves, which should be available very soon. But in the meantime, I think what you have going, we'll help you stay consistent.
I'm excited to we're out to create the best sleeve on the market,Well it used to, not anymore for whatever reason.
Great, I might give them a shot once they are out!
Tuesday 04.08
4x23min Hanging (3kg 3.2kg 3.5kg)
1x60min Extender
ADS (1x1-2h)/Sleeve
There will always be times where something happen in real life that stops you from doing your training for a day or a few days. It happens to anyone doing PE. Have you board a flight with your penis devices before? If yes, how did it go?
True. Rest days can be important as well. And it's a good time to measure after those breaks.
No, not yet. I might do in the future, if the stay is longer than a couple of days. I probably wouldn't try getting it through security at the airport.
Although sleeves and especially a bandage shouldn't be an issue.
Thursday 06.08
3x23min Hanging (3.5kg 3.7kg 3.7kg 4kg)
1x60min Extender
ADS (1x1-2h)/Sleeve
Friday 07.08
2x23min Hanging (4kg 4kg)
1x60min Extender
Sleeve
Saturday 08.08
2x23min Hanging (4kg 4kg)
1x60min Extender
Sleeve
Sunday 09.08
2x23min Hanging (4kg 4kg)
2x60min Extender
Sleeve
5x5x2 Clamping, Bathmate Stretches