Adibeuzo900;475866 said:
So you mean that when you boiled it in hot water the Wine Vacuum was able to stretch even more. That's nice I didn't know that. You should give out a video.

Not a bad idea. I'll put up a video by tomorrow night. I'll update the thread when done.
 
Guys, sorry about the delay. I had some company come in town so privacy was non existent. I will deliver a write up with video (or at least pictures) by the end of the weekend (when company leaves). I hate to over promise and under deliver. Sorry about the timeline snafoo.
 
magiksock;476080 said:
Guys, sorry about the delay. I had some company come in town so privacy was non existent. I will deliver a write up with video (or at least pictures) by the end of the weekend (when company leaves). I hate to over promise and under deliver. Sorry about the timeline snafoo.
Hey Magiksock were you able to get the video
 
magiksock;476080 said:
Guys, sorry about the delay. I had some company come in town so privacy was non existent. I will deliver a write up with video (or at least pictures) by the end of the weekend (when company leaves). I hate to over promise and under deliver. Sorry about the timeline snafoo.
I would love to see it
 
magiksock;476292 said:
The previous post contains the link to the video. Thanks.
Was it able to fit in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]
 
Adibeuzo900;476309 said:
Was it able to fit in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]

I don't have a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. However, if you want to measure the release valve (the whole clear "button" and the diameter of the air release valves), I'll let you know if my wine stopper has been stretched that far. I'm pretty sure that it will fit over the air valves.
 
Adibeuzo900;476310 said:
When you said you put it under hot water did you boil the water and put it in or was it just regular hot water

I put it in previously boiling water. The water was out of the microwave for a minute or two and was hot, but no longer boiling. You don't want it too hot or otherwise the stopper top might split if the conforming device you are using is too large.
 
Go with "tap hot" water. Boiling water could cause serious damage.
 
I cannot for the life of me get the rubber valve on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]. I've tried stretching it with a highlighter lid, warming in hot water...Anyone give me some guidance?
 
You really don't have to stretch it too much over the top of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]. If you hold everything under water and just fit the rubber valve slightly snug over the top of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] it will suck right onto it. I don't want to have my valve on my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] permanently because I think it will stay cleaner that way.

SDinSD;478668 said:
I cannot for the life of me get the rubber valve on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]. I've tried stretching it with a highlighter lid, warming in hot water...Anyone give me some guidance?
 
SDinSD;478668 said:
I cannot for the life of me get the rubber valve on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]. I've tried stretching it with a highlighter lid, warming in hot water...Anyone give me some guidance?

There is a video called "cleaning your [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]" that shows how this is done. Search on Youtube.
 
I just purchased the vac !!! I went from 150- 180 in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] after 30 days. I cant wait to see what the MOD does for me !!!! :)
 
I too struggled with the fact that the rubber attachments that came with my vacuvin (11 euro's for the pump thing and 4 rubber thingies @Blokker). I found out that I had an attachment piece for my gardenhose wich I can attach to my faucet. It fits perfectly on top of my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]. View attachment 25432View attachment 25433View attachment 25434

Only problem now is I get more fluid build-up. Another thing: since I've been using my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words], i only experience growth in my base girth and some increase in my glans. I sure wish top shaft and mid shaft would increase more. My routine: basic stretches 3 sets of 20, 10 min jelq, 20 min [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words].

Help is apriciated!
 
Wannagrow;484745 said:
I too struggled with the fact that the rubber attachments that came with my vacuvin (11 euro's for the pump thing and 4 rubber thingies @Blokker). I found out that I had an attachment piece for my gardenhose wich I can attach to my faucet. It fits perfectly on top of my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]. View attachment 25432View attachment 25433View attachment 25434

Only problem now is I get more fluid build-up. Another thing: since I've been using my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words], i only experience growth in my base girth and some increase in my glans. I sure wish top shaft and mid shaft would increase more. My routine: basic stretches 3 sets of 20, 10 min jelq, 20 min [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words].

Help is apriciated!

Have you considered going with shorter sets of pumping and jelqing? 5 minutes in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] followed by 5 minutes of jelqing x 3 has really been the ticket for the smallest fluid gain with maximum tissue expansion. Going to 20 minutes straight for me would cause retention, 5 minutes is the magic number and the soothing jelqing session as a super-set (SSJ) is the icing on the cake.
 
doublelongdaddy;484756 said:
Have you considered going with shorter sets of pumping and jelqing? 5 minutes in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] followed by 5 minutes of jelqing x 3 has really been the ticket for the smallest fluid gain with maximum tissue expansion. Going to 20 minutes straight for me would cause retention, 5 minutes is the magic number and the soothing jelqing session as a super-set (SSJ) is the icing on the cake.

this is definitely the way to go. i used to get the fluid retention, even when I did the supersets early on with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words], but now, I can do 5 sets of 5 minutes in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] with 5 sets of 3-4 minutes of jelqing with [words=http://www.mattersofsize.com/forum/penis-enlargement-forum/12539-slow-squash-jelq-nothing-give-me-better-expansion.html]SSJ[/words]. It's been really great...don't forget to add the hardcore stretches....for me the downward pulls are killer on the ligs! my biggest issue now is that the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]herc[/words] gets a little snug and uncomfortable, yet the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] is just too big.
 
Hi all!

Another way too exeed pressure that i used for long time in my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] is a tube just a little bit bigger
in diameter than top of [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] and approx 6 inch long, and then pressure the tube against wall,when u doing this
u get your hole body weight too press water out of [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words].

Mvh Mallep

My status is: 9 inch and fat as H.....ll maximum [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] walls.
 
Does any of you all have any tips as to how you got the rubber cork over the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]. My cork just came in the mail and I'm having a difficult time getting the cork over the head of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words].

Any help on this issue?
 
DLD Ive read this, I just wanted to know if there was any advice to stretching the cork over the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] nozzle, because it provided some issues with me. As of now I'm currently using the rubber glove technique as a temporary fix but I'm looking to get more consistentancy.
 
@GETTINTHERE: Will you post tips to stretching the rubber cork over the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] nozzle? It would be greatly appreciated.
 
mallep;485296 said:
Hi all!

Another way too exeed pressure that i used for long time in my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] is a tube just a little bit bigger
in diameter than top of [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] and approx 6 inch long, and then pressure the tube against wall,when u doing this
u get your hole body weight too press water out of [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words].

Mvh Mallep

My status is: 9 inch and fat as H.....ll maximum [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] walls.

That's a smart tip.

Thanks.
 
I started with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] at 8.5" and wouldn't mind 10" lol but since I can't get enough pressure I see other girth gains and man is my dick wide lol. I'm goin for the Lex Steele approach haha I wanna satisy the hell out of women and I'm white. Anyway to fix the ball issue I bought a 1/4" tick rubber 5"x5" square from westlakes cut a hole for the girth I want. Slide the rubber piece over my cock with my dick in the hole, then with the universal sleeve inert into the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]. Gains all way way way better and my cock is getting wider by the day. Now I realized pump pressure won't go high enough since at a certain point it hurts like hell pumping it and with no pressure gains.

Anyway, I have a hand bleed pump which I'd like to use and I say a post on here but can't find it. Anyone?
 
chris89;502386 said:
I started with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] at 8.5

So you were maxed out from the jump. What is your girth? Why did you not just get the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] where there would be lots of room to grow?
 
Havn't been on in awhile, the hot water or putting it in a dish washer are the best tips i can give really.
(put it in dishwasher then get it out as soon as it's finished and try and stretch it and increase elasticity of the rubber)
 
GETTINTHERE;502484 said:
Havn't been on in awhile, the hot water or putting it in a dish washer are the best tips i can give really.
(put it in dishwasher then get it out as soon as it's finished and try and stretch it and increase elasticity of the rubber)


Saves on water too:) A greener way to pump:)
 
mallep;485296 said:
Hi all!

Another way too exeed pressure that i used for long time in my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] is a tube just a little bit bigger
in diameter than top of [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] and approx 6 inch long, and then pressure the tube against wall,when u doing this
u get your hole body weight too press water out of [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words].

Mvh Mallep

My status is: 9 inch and fat as H.....ll maximum [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] walls.

This works great I had to start doing this this week cos I strained a muscle in my chest and couldn't pump so I did it this way .
 
Question..
So after I get the initial suction on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words], I can just use this mod to increase the pressure and I wont have to keep pumping?
Because after awhile pumping tends to hurt my ligaments.
 
Papi Champagne;510450 said:
Question..
So after I get the initial suction on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words], I can just use this mod to increase the pressure and I wont have to keep pumping?
Because after awhile pumping tends to hurt my ligaments.

The only time you need to pump more is if you lose pressure. Once you have a good pressure let it do its thing.
 
Wondering if modification works for [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words] and [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Penomet[/words].
 
doublelongdaddy;502412 said:
So you were maxed out from the jump. What is your girth? Why did you not just get the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] where there would be lots of room to grow?

Oops my bad I meant I'm using the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] and im about 7" in girth.
 
doublelongdaddy;502543 said:
Saves on water too:) A greener way to pump:)

I don't know if I should of started a thread asking you this question DLD , Speaking of green my city has high levels of fluoride in our water supply. I looked up what it does to tadpole growth and its shocking animals become underdeveloped that have any interaction and exposure with it. Let's say I get my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] will 1 cup of water due ? And does the pump need to be completely filled with water for it to be considered a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]hydropump[/words] session. I don't plan on using it in the bath at all as I'm a shower man. And ever since I got a 14 inch tattoo on my stomach I have not switched back to hot showers, Been nothing but cold, russians proved it adds decades to your life and improves circulation. Taking coold showers offsets the fluoride from absorbing into your skin opposed to warm.
 
onemanorgy;517344 said:
I don't know if I should of started a thread asking you this question DLD , Speaking of green my city has high levels of fluoride in our water supply. I looked up what it does to tadpole growth and its shocking animals become underdeveloped that have any interaction and exposure with it.

[video=youtube;4UTSEd7u6Yk]http://www.youtube.com/watch?v=4UTSEd7u6Yk[/video]
 
Medicating;446072 said:
We have so many mods for our toys. I might add a scope and silencer to my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words], the water falls without making a sound and the scope... thats just for show.

I was once a gear head so i might add an autometer vaccum gauge to my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]penomet[/words] when it arrives. rofl

But seriously, i will see if i can add a pumping attatcHydromaxent to the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]penomet[/words] when i get it.
 
it's not right I remembering swallowing alot of toothpaste as a kid, I'm on the distilled water phase for a couple years now won't drink any water in the shower and Do my best to keep it out of my eyes. Will most likely be using distilled water to pump with but it's expensive option if I have to fill up the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] all the way. My father died of atherosclerosis. They say "They" being doctors and scientist there isn't much you can do to reverse hardend arteries. But I live by distilled water from my extensive spice use eventually getting addicted to the chemicals your run of the mill JWH ur-144 activist started smoking the chemical straight instead of it being Sprayed on herbs like damiana or other foliage with acetone basically everyones favorate flavor if you do cocaine it's what gives it that taste. I believe it hardend my arteries due to being predisposed to the disease. I knew for a fact I had it I'd take a supplement that made you feel a certain way like gaba getting a flush feeling in the face well usually only takes 20 to 30 minutes, I would'nt feel this feeling for 2 hours later, again samething with taking valium kicked in wayyyyyy later than I remember it being. I got on distilled water Hcore and I am back to normal levels. There is some truth and myth with distilled water, Truth Distilled water is closest to rain water, < exactly what it is. Truth and Myth Distilled water will decalcify your bones stripping all of your vital nutrient from your body, this is true and false I won't pretend to push a product like distilled water without saying my personal experience and what it exactly does, distilled water will most definately decalcify your body taking an unknown small amount of vitamins and minerals in your body, but the bones are a wonderful thing and that has a draw back the milk and water you drank as a kid is still in your bones, If you God forbid ever die you have no Identification on you at the morgue the Doctor will take a small amount of your bone run it through a machine and can identify the major united states city you were raised in by tracing the chemical level and isotopes. In essence and my personal opinion people need to be flushed out once in a while, I'm betting that calcium you have in you as a child isn't healthy, the human body makes an entire new skeletal structure every 7 years, so it will rid the body of inorganic material like "fluoride" which doctors say is impossible to get out of your system cause it fuses to your bones and is still present every 7 years your body makes a new skeleton. I need to find a cheap distiller machine with a carbon filter in order to pump with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]. I will take a gamble and bet a person gains more girth and length permanently in a non fluoridated water line opposed to fluoridated water. If anyone just starting out with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] wants to take this challenge you being regular tap water and me using distilled I will do it the day my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] gets here I will take pics before and after 6 month period of time and give them to dld don't want to reveal my size or alot of pics here publically till my 12 inch length in penis bpel or nbpel is achieved although a few know my measurements from conversing in pm. THats how confident I am in distilled, fluoridewater and [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]hydropumping[/words] can be a miniscule reason why some Bathmaters do not gain a thing post pumping or at best get an edema swell with no cemented gains. Your putting a toxic chemical on your reproductive organs known to degrade human tissue and expect it to grow. Or at the least a person using distilled water will experience gains faster, It's clean tasting it's the only water iv'e ever tried that feels dry like rain drops
 
Yeah the chlorine in mains water aint good either from what ive read/watched. Aside from drinking it, It is absorbed thru the skin. Tho i can understand why it has to be added...because water can pick up e coli and things the way urban water supplies have to be. The flouride i dont agree with why its added the more i read tho.

It makes sense hey that toxic chemicals arent good for us no matter if its tiny doses. And these things added to water are highly toxic and labelled as such when transported around before its added to the water.

Mineral water is good if you can get it, it has some trace nutrients but none of the man made chemicals if you find the right water. You could also get a reverse osmosis machine instead of a distiller...but a distiller can be trusted more i guess. There are also machines that pull moisture out of the air and make a few gallons of pure water per day. Just plug them into power supply. They work a bit like a refrigerated a/c ....if you have an air con in your house or car you can see it creates and drips water... which comes from the moisture in the air.
 
acer33;517444 said:
Mineral water is good if you can get it, it has some trace nutrients but none of the man made chemicals if you find the right water. You could also get a reverse osmosis machine instead of a distiller...but a distiller can be trusted more i guess. There are also machines that pull moisture out of the air and make a few gallons of pure water per day. Just plug them into power supply. They work a bit like a refrigerated a/c ....if you have an air con in your house or car you can see it creates and drips water... which comes from the moisture in the air.

You know... I never even thought about getting a reverse osmosis machine. I wouldn't mind something like that for the house because I don't drink tap water... ever. I spend so much money on bottled water it makes no sense, and usually I get real expensive water that comes in glass rather than plastic. (I don't trust heated plastic during the hotter days, as if it sits to long it can turn poisonous says my uncle whom is a chemist.) He says it takes quite awhile, probably would have to sit heated for a few months like in the trunk or something, but the potential is always there.
 
doublelongdaddy;510533 said:
Wondering if modification works for [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words] and [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Penomet[/words].

Yes. I have the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words] and used the VacuVin. You gotta finagle it a bit and stretch the rubber out pretty good. I also ended up using a pair of needle-nose to pull it on one side.
Felt like a 300%+ increase in vacuum....and I had to stop. Theres definitely more available.
 
PinkNutz;519517 said:
Yes. I have the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words] and used the VacuVin. You gotta finagle it a bit and stretch the rubber out pretty good. I also ended up using a pair of needle-nose to pull it on one side.
Felt like a 300%+ increase in vacuum....and I had to stop. Theres definitely more available.

That is crazy!
 
....I should add: I didnt use any gauges to measure this and I'm still relatively new to pumping, so... fwiw. But I definitely felt a huge increase in the vacuum.
 
PinkNutz;519591 said:
....I should add: I didnt use any gauges to measure this and I'm still relatively new to pumping, so... fwiw. But I definitely felt a huge increase in the vacuum.

The increase is all that matters!
 
Observation and question.. I had to use the tube mod because the wine vac I got would stretch over.. Now when I pump I get air in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words], if I take the mod off I don't.. Any reason, or way to stop this? I will say I am getting better pressure by far with the mod. I did pump to much and left it on to long the second time and got some FR, but just backed off on the time in it until use to the added pressure.
 
acer33;517421 said:
I was once a gear head so i might add an autometer vaccum gauge to my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]penomet[/words] when it arrives. rofl

But seriously, i will see if i can add a pumping attatcHydromaxent to the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]penomet[/words] when i get it.

Please post pics and description when you get it. Thanks Bro!
 
General chit-chat
Help Users
  • MoS Notifier MoS Notifier:
    Guest Sam hi has joined the room.
  • S (Guest) Sam hi:
    How's everyone
    Quote
  • oldandlively @ oldandlively:
    @sam hi, good to see you brother. Post in the forum and we'll chat more.
    Quote
  • MoS Notifier MoS Notifier:
    Akteon1 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Guest Jayson44 has joined the room.
  • J (Guest) Jayson44:
    hi
    Quote
  • J (Guest) Jayson44:
    Out of sheer curiosity, is anyone interested in having a premature O together while we watch videos?
    Quote
  • J (Guest) Jayson44:
    Anyone wanna cum to asians twerking or kpop vids
    Quote
  • Akteon1 @ Akteon1:
    Hi. Good to be here.
    Quote
  • oldandlively @ oldandlively:
    @Akteon1, good to see you here. Join us into the forum.
    Quote
  • Akteon1 @ Akteon1:
    Which forum? How do I get there?
    Quote
  • Quote
  • MoS Notifier MoS Notifier:
    McDong is our newest member. Welcome!
  • Akteon1 @ Akteon1:
    I was approached by a coach from a Nigerian phone number?
    Quote
  • MoS Notifier MoS Notifier:
    gabrieljones is our newest member. Welcome!
  • oldandlively @ oldandlively:
    @Akteon1, visit other sub forums to check out all the info in PE. Forum list
    Quote
  • oldandlively @ oldandlively:
    More importantly, see the first three posts in this sub forums to answer most of your doubts and questions: Ask questions
    Quote
  • MoS Notifier MoS Notifier:
    tbean750 is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    Guest pedguin has joined the room.
  • P (Guest) pedguin:
    Hello Im looking into getting an ADS and some stretcher what would you guys recommend
    Quote
  • H @ huge-girth:
    pedguin said:
    Hello Im looking into getting an ADS and some stretcher what would you guys recommend
    Sign-up on the forum. Buy the length master and the Silistretcher both from the MOS shop
    Quote
  • P (Guest) pedguin:
    ive been looking at the silistretcher for over half a year, and will look into the length master thank you.
    Quote
  • MoS Notifier MoS Notifier:
    silverberg is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    thescholarjt is our newest member. Welcome!
  • MoS Notifier MoS Notifier:
    mos is our newest member. Welcome!
      MoS Notifier MoS Notifier: mos is our newest member. Welcome!
      Back
      Top