Simple mod to increase vacuum pressure WINE-VACUUM

[DLD]

I made a new thread on the pumping section of the forum, as I speak about two pumps.

http://www.mattersofsize.com/forum/penis-enlargement-pumping-forum/89505-bathmate-and-penomet-the-vacu-vin-modification-clarification.html

I hope it's enough to go on; I am able to take more pictures if needed, I just did some quick snapping.

Excellent support my Brother, I greatly appreciate it!

http://www.mattersofsize.com/forum/...-the-vacu-vin-modification-clarification.html

 

[arkailija]

Excellent support my Brother, I greatly appreciate it!

http://www.mattersofsize.com/forum/...-the-vacu-vin-modification-clarification.html

You're welcome and thank you! I really hope the simple pictures clarify the whole Vacu-vin deal, at least when it comes to one way of doing it.

 

[ThatDude512]

That's the one I have and the modification is not difficult

I also have the same one now, and I picked up some silicone toe caps with it. You just cut a small hole in the cap and stick the wine vac cork in that. Then you can roll the cap over the end of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bath mate[/words] like a condom. You can take it on and off in a couple of seconds and is really convenient! Plus you can use the open ended one as a pump sleeve to keep the doughnut at bay, they are super stretchy!

FootMatters Soft Silicone Gel Big Toe Caps & Sleeves Combo Pack - Hallux Separator - Corrector Cushions & Protects Great Toe & Thumbs - Helps Relieve https://www.amazon.com/dp/B010RMHZB2/ref=cm_sw_r_cp_apip_oAmlcSIgWpS9A

 

[DLD]

You're welcome and thank you! I really hope the simple pictures clarify the whole Vacu-vin deal, at least when it comes to one way of doing it.

Indeed they do, this is always the case.

 

[Chaoskampf]

I bought the wine vac thing today. Just didn't manage to put the rubber around the tip of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Goliath[/words] without help yet. I haven't checked all 28 pages of this thread but I am just curious on how this will work anyway. I used it in the shower and the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Goliath[/words] is really long, it is difficult to pump because the arms don't reach so far. Also I had to take off the handpump everytime I had to move the piston back. I wonder if this is normal. All my tests were done with the rubber thing just pressed against the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words] valve, as I said I didn't manage to keep it at the location. Also I airpumped once. Displacing the piston once is already a huge difference in pressure. So that's good.

 

[MikeyM]

Just tested the mod today and I must say I love it! Glad that I decided to try the mod.

 

[DLD]

Just tested the mod today and I must say I love it! Glad that I decided to try the mod.

It is the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BathMate[/words] game changer!

 

[REDZULU2003]

If you dont have, or dont want to purchase the hand pump versions, this simple mod may interest you.

 

[DLD]

If you dont have, or dont want to purchase the hand pump versions, this simple mod may interest you.

It also says so much money. The bathmate with the handball I think goes for like $70 more then the standard model, when you can get a $10 wine vac if you can’t afford. The wind vac is much more powerful than the handball.

 

[Big Schwanz Acht]

does anyone have any empirical data on the Extreme vs. VacuVin? My guess would be The VV beats it mainly due to the potential lawsuits from too much 'pull'

 

[arkailija]

For me it's only by a "feel" data, not very scientific.

I've reached the same threshold with both the hand ball pump and Vacu-Vin.
Vacu-Vin is cheaper but less intuitive to use.
How many questions there have been how to get it to work?
Modification clarification.

That said, the hand ball is more relaxing to use and takes up less space.
It's what I mainly use nowadays, unless I switch for a Penomet session (bit larger cylinder), with that I'll use the Vacu-Vin. It could be time again to rotate my routine, but using the BM with the hand ball pump is less hassle for me.

With the same threshold I mean by getting to a "click" point with Vacu-Vin; it's a force to be reckoned with! And I have reached the similar feeling with the ball pump, maximum force that must be dealt with honor.

 

[DLD]

does anyone have any empirical data on the Extreme vs. VacuVin? My guess would be The VV beats it mainly due to the potential lawsuits from too much 'pull'

Most definitely the wine vacuum is so much powerful Then the handball. I agree with you and I can almost certainly say for sure that they limit the amount of pressure to avoid people hurting themselves. So the wine vacuum has no limits and it’s $60 cheaper LOL

 

[REDZULU2003]

Also keep in mind that no matter which way you choose to increase the pressure, you will not get to it any quicker by using either method because of how Hydro pumping works, which wont allow you to jump in pressure, even with a Wine Vac being used.

Read my thread on how hydro pumping works.

 

[zoppertj]

ok i've been lurking here with my X40 and trying to get this working. Was at hardware shop and noticed the pipe insulation tubing. Its a spongy rubber that goes over pipes to insulate (heat and cold). Got a 2" diameter when as its a little stretchy and wola! it works, fitted over X40 and the winevac inserts perfectly. (Carefully the tubing splits easily). Costs me $4.50 for 1 metre and I used 5cm so plenty spare if split again. Gotta try it out for a longer session than the 15 mins but it works for me.

 

[Big Schwanz Acht]

Nice bit of MacGyver-ing...I used the more rigid clear plastic tubing as my 'go-between'...same principle same result

 

[DLD]

ok i've been lurking here with my X40 and trying to get this working. Was at hardware shop and noticed the pipe insulation tubing. Its a spongy rubber that goes over pipes to insulate (heat and cold). Got a 2" diameter when as its a little stretchy and wola! it works, fitted over X40 and the winevac inserts perfectly. (Carefully the tubing splits easily). Costs me $4.50 for 1 metre and I used 5cm so plenty spare if split again. Gotta try it out for a longer session than the 15 mins but it works for me.

Excellent work my brother now you have a turbo charged your Bathmate! Serious growth gains coming. This is the best modification anyone can do to their Bathmate!

 

[Big Schwanz Acht]

...but don't overdo it (with great power comes great responsibility)

 

[F26]

Perfect mod which I'll use for sure in the future. Thanks a lot ?

 

[DLD]

Perfect mod which I'll use for sure in the future. Thanks a lot ?

It is one of the best modifications that has ever come out of the brotherhood.

 

[luckyj]

Bumping this up looking for help if anyone can - I got the Bathmate Hydromax5 and I'm trying to do the mod...I have a section of 7/8" (ID) flexible/silicone pipe that fits great & snugly over the tip of the BM but the Vacu Vin stopper pug end (which would get attached on the opposite end of 7/8" pipe connection ) is WAY too small. No way to get a snug fit as it is too loose and nowhere close to the 7/8" size it would need to be (or close to it ) to make a seal and connect securely into the extension pipe end. Are there different models of stoppers/Vacu Vins?? I can't see them being that far off in size since all are made for wine bottles which have a standard opening.

 

[DLD]

Bumping this up looking for help if anyone can - I got the Bathmate Hydromax5 and I'm trying to do the mod...I have a section of 7/8" (ID) flexible/silicone pipe that fits great & snugly over the tip of the BM but the Vacu Vin stopper pug end (which would get attached on the opposite end of 7/8" pipe connection ) is WAY too small. No way to get a snug fit as it is too loose and nowhere close to the 7/8" size it would need to be (or close to it ) to make a seal and connect securely into the extension pipe end. Are there different models of stoppers/Vacu Vins?? I can't see them being that far off in size since all are made for wine bottles which have a standard opening.

@Big Schwanz Acht can help

 

[Big Schwanz Acht]

Bumping this up looking for help if anyone can - I got the Bathmate Hydromax5 and I'm trying to do the mod...I have a section of 7/8" (ID) flexible/silicone pipe that fits great & snugly over the tip of the BM but the Vacu Vin stopper pug end (which would get attached on the opposite end of 7/8" pipe connection ) is WAY too small. No way to get a snug fit as it is too loose and nowhere close to the 7/8" size it would need to be (or close to it ) to make a seal and connect securely into the extension pipe end. Are there different models of stoppers/Vacu Vins?? I can't see them being that far off in size since all are made for wine bottles which have a standard opening.

If you have the silicon tube attached to the tip of your BM, try fitting the actual VacuVin hand-pump to the end of the tube and start pumping (you can leave-out the the VV cork)

 

[DLD]

If you have the silicon tube attached to the tip of your BM, try fitting the actual VacuVin hand-pump to the end of the tube and start pumping (you can leave-out the the VV cork)

This is why I always tag you when it comes to this issue. You’re so good at explaining it and being patient with brothers and I truly appreciate this

 

[Locke]

I'm new to this forum but have been using my bathmate for about six months. I used the wine vac mod for the first time successfully today. Did a 20 minute session. I got to say, it really helped me stretch beyond my normal limit and was not too uncomfortable. However I've noticed my O ring came back. I haven't had an O ring from a pump in months. Has anyone else experienced more water absorption using this method ? Not a fan of the O ring. Would it be wise to do a shorter session until my body is used to this new method, or do I just have to wait it out like I did when I first started pumping?

 

[DLD]

I'm new to this forum but have been using my bathmate for about six months. I used the wine vac mod for the first time successfully today. Did a 20 minute session. I got to say, it really helped me stretch beyond my normal limit and was not too uncomfortable. However I've noticed my O ring came back. I haven't had an O ring from a pump in months. Has anyone else experienced more water absorption using this method ? Not a fan of the O ring. Would it be wise to do a shorter session until my body is used to this new method, or do I just have to wait it out like I did when I first started pumping?

you can get this dealt with very easily by using the SRT 5×5×3 and this will disperse all fluid retention wall increasing tissue expansion. Check it out let me know what you think.

 

[UnlukyJim]

HI all, how does a wine vac increase pressure? How do you use it with the bathmate once it's on the valve?

 

[offhistrolley]

Instead of pulling the Bathmate into your pelvis to push water from the Bathmate nozzle you draw/pull the water from the nozzle of the Bathmate.
That increases the pressure inside the Bathmate as more water is removed.
If you go down this route though id be very careful...don't go too hard too quickly
I burst the dorsal vein near the base of my cock and after my session from about an inch down one side turned purple/black and had to stop for weeks till the bruising cleared up. I still have a dark mark where it ruptured and slightly darker bruising down the left side to my foreskin.
Just waiting on some arnica cream to try and clear the rest of it.

 

[offhistrolley]

I still use the mod but i vary the pressure during 3x 5min sets with SSJ's for a few minutes between each set.
First set is more of a warm up but with a good stretch, 2nd set a little stronger, 3rd set is the strongest but still not approaching the max pressure...or if i do approach max i wont keep it there for long.
Each set i always remove the mod and back the pressure off slightly after around 60secs then increase again slightly 60secs later and so on.
End of each set i release pressure slowly in stages while "pumping" my pc muscle...seems to help avoid bruising.

Think i used 25mm clear silicone tubing and a cheap vac-u-vin kit from amazon. Cut a small length (about 40mm length of tubing) then rammed a stopper into one end, superglue and then heated it with a hair dryer and forced it over the Bathmate.
If using it in the bath it becomes more pliable with the warm water. If you make the tubing too long compared to the stopper it can collapse under the pressure so i made it as short as i could with just enough clearance to the switch on the bathmate valve.