Simple mod to increase vacuum pressure WINE-VACUUM

[Scypher]

Anybody realize you can use the vaccum mod to pump without water? Turns the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] into a pump you can use anywhere since it requires no water. Seems to pump in double the time but also has added fluid retention.

 

[youknowme123321]

I knew having pictures would help everyone understand better.

yeah the pics made it very easy to do. i used a silicone sleeve i cut to size. i'll make a video for it when i am back from vaca in the new year

 

[BigDickler]

Very nicely done. Would be awesome to make a video showing a comparison (before and after of the suction taking place). Not necessarily on you, but in general to better display the advantages of doing something like this.

 

[Wonkas_Willy]

nevermind!

 

[Wonkas_Willy]

Not sure if this has been mentioned but, I've found something which has helped me tremendously. I remove the very tip of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] (the clear part with the holes, along with the little black pressure release piece). I stick my rubber piece for the vacuvin inside the hole where the tip used to be. It actually fits in there pretty good and I don't have to hold it to keep it in. All I have to do is pump and it instantly pulls a vacuum. I'll try to snap a shot of what it looks like.

Here is the piece I have and the two rubber pieces it comes with:

 

[youknowme123321]

Not sure if this has been mentioned but, I've found something which has helped me tremendously. I remove the very tip of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] (the clear part with the holes, along with the little black pressure release piece). I stick my rubber piece for the vacuvin inside the hole where the tip used to be. It actually fits in there pretty good and I don't have to hold it to keep it in. All I have to do is pump and it instantly pulls a vacuum. I'll try to snap a shot of what it looks like.

Here is the piece I have and the two rubber pieces it comes with:

cool. a pic of this would be great and very much appreciated.

 

[Wonkas_Willy]

Here you go. Hope this shows what I'm talking about.

 

[craigmack]

hey guys, im new to the forum. I have a question directed to people who have tried the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]hydromax[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x30[/words] with the wine vac mod and the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x30[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]xtreme[/words]. Would you guys say the pressure created with the wine vac mod on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]hydromax[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x30[/words] is equal/greater/or less than the pressure created with the handball pump on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x30[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]xtreme[/words]???

 

[craigmack]

does the pressure with the wine vac mod on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x30[/words] equals to the pressure with the hand ball pump on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x30[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]xtreme[/words]???

 

[kerman]

edited

 

[kerman]

I was just wondering the same... found this guys review about both the plain [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] and the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Xtreme[/words], and looks like the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Xtreme[/words]'s manual pump gets stuck after some pumps... (see minute 5:12)

[video=youtube;ZOcEYm6jdKQ]https://www.youtube.com/watch?v=ZOcEYm6jdKQ#t=312[/video]

Also, the guy uses this Vacun vin wine saver does its best with the normal [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] --> Vacu Vin 981460 Wine Saver

What do you think about?

 

[kerman]

edited

 

[arkailija]

Hi there!

I have the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X30[/words] Extreme and [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Hercules[/words], with Vine-vac mod. I'd say you can definitely get in the same range with the modification, perhaps even more.
Difficult to say, haven't used my Extreme in a while actually, there's something wrong with it.

Several times I've used the Vine-vac and I've hit the spot where the Vine-vac clicks, as in the maximum pressure is achieved. How much is that in Hg, I don't know.
It feels very strong though, a real work-out. Unfortunately due to a abrasion on my penis, I haven't had the chance to train so much.

 

[liquidmetal17]

Like a charm!
The tubing you need is Clear PVC or Vinyl tubing that is 1"od X 3/4"id, you can buy it from HomeDepot, Lowes or other large hardware stores.
The local HD sells it in bulk and I picked up a foot for about $1.50 and have most left over. I recently changed the pumps to the Rabbit brand as the square base seems to work much better. You can pick one up from Bed, Bath and Beyond for about $13, here's a link to my model.Metrokane Rabbit
Just follow the instructions and you will be amazed at the results!

I've recently started using the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x40[/words] and decided to try the tubing + wine pump addition. Based on the above quote, I decided to go with the Rabbit instead of the VacuVin. I got the tubing attached with no trouble, but I think I must be doing something wrong somewhere; when I use the wine pump, it seems to be pushing air into the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] instead of sucking water out of it. Any help or advice would be greatly appreciated! Thank you!

 

[liquidmetal17]

Like a charm!
The tubing you need is Clear PVC or Vinyl tubing that is 1"od X 3/4"id, you can buy it from HomeDepot, Lowes or other large hardware stores.
The local HD sells it in bulk and I picked up a foot for about $1.50 and have most left over. I recently changed the pumps to the Rabbit brand as the square base seems to work much better. You can pick one up from Bed, Bath and Beyond for about $13, here's a link to my model.Metrokane Rabbit
Just follow the instructions and you will be amazed at the results!

I recently started using the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x40[/words] and decided to try the wine pump modification, but something is going wrong and I'm not sure what. When I use the wine pump, it seems to be pushing air into my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words] instead of sucking water out of it. I'm using the pump that's mentioned in the above quote. Any help would be greatly appreciated. Thank you!

 

[liquidmetal17]

I tried doing this with the tubing and the rabbit wine pump. I'm able to get everything connected properly, but the wine pump seems to be pushing air into the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] instead of pulling water and air out of it. Did I miss something?

 

[kerman]

The [words=http://TLCTugger.com/MOS]TLC[/words] cone adapter for the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Hydromax[/words] vacuvin mod is the same for the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X30[/words] and [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words]?

 

[MoS-Newbie]

I was just wondering the same... found this guys review about both the plain [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] and the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Xtreme[/words], and looks like the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Xtreme[/words]'s manual pump gets stuck after some pumps... (see minute 5:12)

[video=youtube;ZOcEYm6jdKQ]https://www.youtube.com/watch?v=ZOcEYm6jdKQ#t=312[/video]

Also, the guy uses this Vacun vin wine saver does its best with the normal [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] --> Vacu Vin 981460 Wine Saver

What do you think about?

That exact video actually made me rethink my decision of getting an [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X30[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Xtreme[/words]. I'll probably just go with the regular [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X30[/words] and use this awesome mod, as it seems to be working just as well, maybe even better. Saves me 100,- €, that's sweet as well.

 

[runningignus]

View attachment 30704My new set up

 

[runningignus]

Air pumping feels good, can't wait for the water

 

[runningignus]

Got the sleeve set as wellView attachment 30705

 

[DLD]

Got the sleeve set as wellView attachment 30705

Your all set, report back with how intense this mod is.

 

[runningignus]

I hit the max pressure the vacuvin could make. I kept hearing the click. Sucks because I could go more hg so I just did a longer session. Was very fat afterwards. I did 6x6x6 with a last session of 15 min. Felt great.

I'm done worrying about what my girl or any other thinks. I'm working my length and girth to where I wanna be. Gotta make myself happy before I can make someone else. It's time I stop worrying about others and focus on myself. I'll be happy and that'll make others in my life happy.

Much love [words=http://www.mattersofsize.com/join-now.html]MOS[/words], keep pushing forward.

 

[DLD]

I hit the max pressure the vacuvin could make. I kept hearing the click. Sucks because I could go more hg so I just did a longer session. Was very fat afterwards. I did 6x6x6 with a last session of 15 min. Felt great.

I'm done worrying about what my girl or any other thinks. I'm working my length and girth to where I wanna be. Gotta make myself happy before I can make someone else. It's time I stop worrying about others and focus on myself. I'll be happy and that'll make others in my life happy.

Much love [words=http://www.mattersofsize.com/join-now.html]MOS[/words], keep pushing forward.

Glad to hear you got it working and your seeing better results. The clicking I am not sure about, maybe someone else knows.

 

[MoS-Newbie]

The clicking I am not sure about, maybe someone else knows.

The Vacu Vin Wine Saver makes a clicking sound when a strong enough vacuum (to preserve the wine) is reached.

 

[templnite]

You have to bore out the center of the stopper like in the first page.

 

[DLD]

The Vacu Vin Wine Saver makes a clicking sound when a strong enough vacuum (to preserve the wine) is reached.

So it is a good thing, it shows maximum intensity is reached, correct?

 

[MoS-Newbie]

So it is a good thing, it shows maximum intensity is reached, correct?

Yup that's correct. I think if you get any more pressure your dick would explode lol =D

 

[DLD]

Yup that's correct. I think if you get any more pressure your dick would explode lol =D

Excellent!

 

[Longth]

FINALLY got the pump for this on the way. Really thankful these are cheap as dirt on the internet. Hopefully it makes things that much better.

 

[Perestroyka]

Does [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X30[/words] needs a [words=http://TLCTugger.com/MOS]TLC[/words] Skin Cone for proper work, or just VacuVin does the job itself?

 

[runningignus]

If you can stretch the stopper over the valve, you're all good.
If not, pop the valve off and just use the stopper on top. Works the same but water will escape easier.

 

[Perestroyka]

Hallelujah, bros..I bought VacuVin and I am happy as hell now, I had issues placing the stopper across the valve so I came up with BRILLIANTLY FUCKING GENIUS idea, I quit smoking and I bought e-cigarette couple of months ago, y'all know for e-cig you need specialized oil for nicotine smoke etc, well one of those oil caps perfectly fits the valve from bottom, cover all possible holes etc. the upper side was closed and I pull the knife out and cut 1 mm of cap and got similar [words=http://TLCTugger.com/MOS]TLC[/words] Cone...Isn't that great brothers, admit xDDD Here is the image below, I haven't tried it all together though, I was so impatient to show you this and share it with you my Brothers

Link: ]

 

[runningignus]

Haha nice. Now use it.

 

[DLD]

Hallelujah, bros..I bought VacuVin and I am happy as hell now, I had issues placing the stopper across the valve so I came up with BRILLIANTLY FUCKING GENIUS idea, I quit smoking and I bought e-cigarette couple of months ago, y'all know for e-cig you need specialized oil for nicotine smoke etc, well one of those oil caps perfectly fits the valve from bottom, cover all possible holes etc. the upper side was closed and I pull the knife out and cut 1 mm of cap and got similar [words=http://TLCTugger.com/MOS]TLC[/words] Cone...Isn't that great brothers, admit xDDD Here is the image below, I haven't tried it all together though, I was so impatient to show you this and share it with you my Brothers

Link: ]

Can't wait to see it attached! So happy you found it.

 

[Perestroyka]

Unfortunately, this improvement didn't do anything good, I cant align it to the four holes on the valve, but I'll go to a hardware store for some tubing and I'm just gonna try that way... I was so angry when my idea didn't work, I just released the original pressure of [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] and put it away, went to sleep...goddamn improvements.

 

[runningignus]

Be sure to bring the stopper with you. That way your not guessing. Like we said earlier, you can take the valve itself completely off and just put the stopper in the hole as well. It fit perfectly in mine.

 

[Perestroyka]

Yeah I have tried that as well, but I invented another "cone", and it's wider and more pliable than nicotine oil cap, it perfectly creating the seal on the valve, and the upper opening is tight enough to get the stopper on it, I have been struggling an hour and a half to get it done, and I just need to try it now, I hope God sees my struggle and I hope He'll grant me a seal now xD

 

[Perestroyka]

Here me again, my "cone" is working now alright, BUT what the biggest problem is, when I get that amount of pressure I feel it's comfortable, the valve and latch actually start to produce bubbles and I am losing that pressure AND I DON'T WANT THAT TO HAPPEN, I was reading entire this thread and one guy had similar problem, I twisted valve in few directions seeking for the sweet spot to stop bubbling but it doesn't working, another thing which happening is when I get huge pressure, the cone slide more and more down the valve and maybe that is the problem, I can't experiment now though cuz I already pumped and it would be too much if I start experimenting, my point here on this matter is does that pressure within the cone pulling the valve out and that makes all that bubbling, or it's something totally different which can't be fixed by my hands, I am really doing my best to save the money (TLC CONE IS 10 DOLLARS AND SHIPPING TO MOSCOW IS ANOTHER 10 DOLLARS WHICH I DON'T WANT TO GIVE, IT'S TOO MUCH REALLY)
Anyone had the similar problem, anyone solved it if you had it? I don't know much about vacuums and how it works, I need few tips, if you have it please share it with me xDD Thanks.

 

[BigBeardBig]

Something similar is hapenning to me brother, loosing the pressure and the bubbles.
Il just weait a little and order more useful stuff from the [words=http://TLCTugger.com/MOS]VLC[/words] page so I dont pay so much of postage, probably gona go for the whole kit.

 

[Perestroyka]

Something similar is hapenning to me brother, loosing the pressure and the bubbles.
Il just weait a little and order more useful stuff from the [words=http://TLCTugger.com/MOS]VLC[/words] page so I dont pay so much of postage, probably gona go for the whole kit.

I live on the other side of the world, so shipping is expensive and I don't wanna give money for it..
However I just had best DRY session ever with Vacu Vin bro, damn I just removed the entire valve with latch as well, and put the stopper up, and pumped it to the brink of crying, I was sweating and my dick was pulsing like hell, when I removed pressure and [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words], I saw the best possible expansion EVER, with 0% fluid, I think I will pump my penis with regular [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] work, empty the water and rebuild the pressure in dry method with Vacu Vin only, then who knows, might be a good call

 

[runningignus]

Have you cleaned the valve?
Push the little switch to the opposite side?
Try to slam the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words] on a table or counter. It helps somewhat with the spring to settle. I used to get the bubbles through the valve as well. I just cleaned it and slammed it then it was fine. It gives people more trouble more than you think. Do sets of air pumping with jelqing, it'll help to make sure of no fluid retention and help with expansion until you get the valve fixed.

 

[templnite]

Why don't you just follow the instructions on page eleven brah? All you need is to heat the rubber, and stretch it out on your cap

 

[BigBeardBig]

I live on the other side of the world, so shipping is expensive and I don't wanna give money for it..
However I just had best DRY session ever with Vacu Vin bro, damn I just removed the entire valve with latch as well, and put the stopper up, and pumped it to the brink of crying, I was sweating and my dick was pulsing like hell, when I removed pressure and [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words], I saw the best possible expansion EVER, with 0% fluid, I think I will pump my penis with regular [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] work, empty the water and rebuild the pressure in dry method with Vacu Vin only, then who knows, might be a good call

I tried some DRY session with [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words], its pretty great tbh
no hassel with water, I use it sometimes when I dont have that much time but want to get as much girth work as possible

 

[BigBeardBig]

Have you cleaned the valve?
Push the little switch to the opposite side?
Try to slam the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words] on a table or counter. It helps somewhat with the spring to settle. I used to get the bubbles through the valve as well. I just cleaned it and slammed it then it was fine. It gives people more trouble more than you think. Do sets of air pumping with jelqing, it'll help to make sure of no fluid retention and help with expansion until you get the valve fixed.

Cleaning the valve really, really good solved the whole bubble problem for me.
I suggest cleaning it at least 1x a week

 

[runningignus]

Cleaning the valve really, really good solved the whole bubble problem for me.
I suggest cleaning it at least 1x a week

You sir, clean to much lol. I'm lucky to clean mine once in 2-3 months. I let it air out after each use. Haven't had any problems since the beginning with the valve. I only use a certain lotion when using the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words]. The one I have stays smooth and silky for a while until it absorbs. I stopped using any Vaseline or lube. Feels better for me at least.

 

[DLD]

I think one time per week is perfect. It is so important to keep the valve clear of dirt, oil and grime as these things will interrupt vacuum. As time goes on and no cleaning is done the pump will eventually give terrible workouts. Remember water and air are difficult to contain so having superior vacuum is important to keep water in and air out.

 

[Perestroyka]

Why don't you just follow the instructions on page eleven brah? All you need is to heat the rubber, and stretch it out on your cap

I've designed my own improvement so no problems with stoppers and cones to get seal etc. I just have problem with the VALVE itself, doesn't work properly, air is coming in when I reach the certain amount of vacuum with wine vac..

 

[Perestroyka]

Have you cleaned the valve?
Push the little switch to the opposite side?
Try to slam the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words] on a table or counter. It helps somewhat with the spring to settle. I used to get the bubbles through the valve as well. I just cleaned it and slammed it then it was fine. It gives people more trouble more than you think. Do sets of air pumping with jelqing, it'll help to make sure of no fluid retention and help with expansion until you get the valve fixed.

1. Valve was perfectly clean, before using [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] with wince vac, I washed entire [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words], tube chamber as well.
2. Little black switch doesn't respond to any "move" when I get full pressure, and that wasn't my concern since [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] worked properly, until now.
I was trying to fix it by dismantling the valve, and reattaching it again, twisting it full circle with and without vacuum and pressure, result? SAME
My hope for this entire bullshit with bubbles and air leaks, lies in so called INSTINCT that I will solve this by learning sweet spots and hints to prevent any problem with my pump, it was just one session, "scout" session, but very well accomplished.

 

[templnite]

Probably the pip didn't set properly because I don't think vacuum would cause the valve to depress