Simple mod to increase vacuum pressure WINE-VACUUM

[BornInFigi]

So I picked up a VacuVin this weekend to do the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] mod and like most i had issues getting the rubber part over the valve . What I found is You don't need any crazy mods or insane stretching to make it work or at least I didn't. Here is what worked for me.

Pump like normal till it stays on hands free.

This is optional. I got this to work without needing to stretch my rubber stop but heating it hot water and stretching it some will make it easier.

For the pump to work you don't need to have it covering the whole valve just enough to cover the 4 holes on top. Just line up the rubber on top of the holes and put the vac on and pump. It takes a moment to get the cordination down, I like to put the stop over the holes while I have it in the pump. After the first time it stays in place sealed to until I release the pressure. It takes only 10 seconds to realign and pump once you get it down.

Yeah. I no longer use the old idea of leaving the adapter on, but instead I just hold the adapter and wine vac part on there while I pump just like you said enuff to form a seal and pull a little more water out and maintain a high level of suction.

 

[DLD]

Yeah. I no longer use the old idea of leaving the adapter on, but instead I just hold the adapter and wine vac part on there while I pump just like you said enuff to form a seal and pull a little more water out and maintain a high level of suction.

Never thought of using like this, makes sense though. I will try it tonight.

 

[jackgomma]

That is a brilliant idea !

 

[DLD]

That is a brilliant idea !

Especially for the guys who can't make the attachment permanent. I never thought of using it this way but it makes sense.

 

[smerc]

Especially for the guys who can't make the attachment permanent. I never thought of using it this way but it makes sense.

Really saves a lot of headache having to fit it around the valve. Thought of that technique before, but I don't have one so I couldn't test it out. Saves some $$ though not having to purchase another product.

 

[BornInFigi]

That is a brilliant idea !

It is pretty slick.

 

[BornInFigi]

Give ma999 some rep or thanks guys. I'm mobile and there's not yet a provision for that. He's the one that brought it to light.

 

[youknowme123321]

So I picked up a VacuVin this weekend to do the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] mod and like most i had issues getting the rubber part over the valve . What I found is You don't need any crazy mods or insane stretching to make it work or at least I didn't. Here is what worked for me.

Pump like normal till it stays on hands free.

This is optional. I got this to work without needing to stretch my rubber stop but heating it hot water and stretching it some will make it easier.

For the pump to work you don't need to have it covering the whole valve just enough to cover the 4 holes on top. Just line up the rubber on top of the holes and put the vac on and pump. It takes a moment to get the cordination down, I like to put the stop over the holes while I have it in the pump. After the first time it stays in place sealed to until I release the pressure. It takes only 10 seconds to realign and pump once you get it down.

glad it worked for you. i was never able to get good suction myself

 

[ma999]

So I swear I'm not joking, lying or exaggerating but with this mod I am hitting an inch over my BPEL after only 3 days I can hit 7 without the mod and that is my BPEL.keep in mind this is only in the pump. Now I get over the top line past the measuring tape in my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x30[/words] and getting close to the opening. I am probably pumping dangerously too much now but I have no pain and I love the feeling. My girth seems like I'm not getting any expansion though and the side of my penis and especially my curve feels really sore. I hope this intense pumping finally straighten it out.

 

[smerc]

Do you have much of a fat pad?

How bad is the curve? The extra vacuum could just be straightening it out. I would watch the curve very carefully.
Is your curve peyronie's induced?

 

[ma999]

It is not peyronies. I think it's from bad masterbation habits as a kid. If it is just Straightening it that would better than length to me at this point, though it's awesome seeing your length goal. The curve has always made me self conscious as mine is pretty severe, and I believe is causing my wife discomfort during sex.

 

[ma999]

Also I do have a bit of a fat pad.

 

[DLD]

It is not peyronies. I think it's from bad masterbation habits as a kid. If it is just Straightening it that would better than length to me at this point, though it's awesome seeing your length goal. The curve has always made me self conscious as mine is pretty severe, and I believe is causing my wife discomfort during sex.

This sounds to be uneven ligaments if it was masturbation induced. I would spend some time favoring the uneven side in masturbation and stretching. If the curve goes to the shaft erect jelqing against the curve would be best. As far as equipment goes the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words] is a great way to correct a curve through multiple sessions each day at a good intensity. You can adjust the base screws and bars to accommodate any uneven ligaments. Also, erect pumping using your [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BathMate[/words] would also go to straightening out things. Good luck Brother.

 

[smerc]

It is not peyronies. I think it's from bad masterbation habits as a kid. If it is just Straightening it that would better than length to me at this point, though it's awesome seeing your length goal. The curve has always made me self conscious as mine is pretty severe, and I believe is causing my wife discomfort during sex.

That's better then. Not sure if it happens, but it seems like you could reopen scar tissue or move it around to the point where you're creating more scar tissue(s). Therefore causing an even bigger bend. If it was related to peyronie's.

Are you noticing a reduction of bend once outside the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words]? Even if only temporary.

Not sure what to conclude on the BPEL gain. I'm sure it's not related to your pad since the added pressure shouldn't had sucked the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] closer to your body to achieve another inch. You should had already noticed that w/o the wine vac mod. Just be thankful it happened. I don't hear of any mods causing an inch increase compared to previous results done w/ a PE device. Take it and run all the way to the finish line w/ it

 

[ma999]

I just want to be clear. I have not gained an inch outside the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] but inside I'm getting an inch over my BPEL. I haven't been able to tell yet. It seems straighter but my EQ has always been shit and have to pump mostly flaccid. Speaking of flaccid my flaccid length as been the longest I ever seen and missed almost two days and still long for me. I report back at the end of the week on if it's straighter already when I have sex and EQ improves.

 

[smerc]

Yeah, I was understanding that (BPEL in the tube). Hopefully you do get the EQ increase and keep some of those gains.
Are you doing any jelqing against the curve? Trying to mold it the other way I mean.

 

[ma999]

Yeah, I was understanding that (BPEL in the tube). Hopefully you do get the EQ increase and keep some of those gains.
Are you doing any jelqing against the curve? Trying to mold it the other way I mean.

I've tried in the past and had no luck. I honestly might been doing it wrong and been thinking of trying. Mine also kinda started to twist over the years like it lays straight down flaccid but sideways.I do think it is getting straighter and really feel the soreness on the side of the curve.

On another note I might be pushing the pumping but I maxed out the length of my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x30[/words] last night thanks to this mod! I even made my wife come look who just shook her head and walked away lol. Im not sure when I should switch to my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x40[/words] now though. I'm really wanting girth so maybe wait and try packing the tube more before switching?

 

[smerc]

On another note I might be pushing the pumping but I maxed out the length of my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x30[/words] last night thanks to this mod!

How far away are you from maxing out the girth?

I'm really wanting girth so maybe wait and try packing the tube more before switching?

That's what I would do. Unless you're not that far away from maxing out the girth.

 

[ma999]

I think I'm getting their but have some time. I don't get any gator bite yet. One thing I learned is the pump is diceving. If I stand next to a mirror I can see the where I'm hitting and where I'm not .

 

[BornInFigi]

wetholefans

Ban

 

[DLD]

Yup, Banned

 

[Wonkas_Willy]

I was never able to fit the rubber piece over the valve as well so that is ultimately how I used my vacuvin. Only problem with the vacuvin (the one I have anyways) is that the rubber piece starts to collapse on itself when I try to pull a vacuum past a certain level so the pump is limited there. Also, for whatever reason, I eventually had a harder time getting a good suction out of it because I had to line it up just right to pull any kind of vacuum. I don't know what I was doing wrong but, I filled all the holes on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] valve (except the center one) with silicon and now all the pumping is done through that one hole rather than all of them. Problem solved and it still works just fine, water or not.

I love the fact that it's 100% quiet though.

 

[bigger7757]

Could someone give me the exact link to order the right winevac? I found another link but they were all sold out on amazon. I need this really bad because I usually have to pump outside of the shower. Besides I feel like I just need more pressure. Thanks a lot guys!

 

[bigger7757]

Bump anyone? I just want to make sure I get the right size/product.

 

[smerc]

Bump anyone? I just want to make sure I get the right size/product.

Amazon.com: Vacu Vin 981460 Wine Saver Vacuum Wine Pump with 2 Stoppers: Wine Bottle Stoppers: Kitchen & Dining

That has worked for a few others as well.

If you have problems w/ the stoppers (if heating doesn't work), then there is the o-ring, silicone sleeve, [words=http://TLCTugger.com/MOS]vlc[/words], rubberband, and ETC mods to help create the seal.

 

[arkailija]

If you have problems w/ the stoppers (if heating doesn't work), then there is the o-ring, silicone sleeve, [words=http://TLCTugger.com/MOS]vlc[/words], rubberband, and ETC mods to help create the seal.

I want to quote on this as it is very true and in my opinion the easier way to go! I actually cut some silicone away, most likely from a pump sleeve or so. It goes around the valve nicely and with little work you manage to create a good suction. I did try to make the stoppers fit a long time ago, I couldn't do it. Thankfully, someone else had written about this solution as well and that made it possible for me to use the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] with Vine-Vac.
I also have the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Penomet[/words], for that I hollowed the stoppers inside and now it fits well to the valve opening.
But overall, a thick O-ring type solution is in my opinion the easiest way to get around. It doesn't attach to the unit permanently, so clean up is also easy.

 

[DLD]

Someone mentioned using a long rubber and that can be wrapped around the vac to accomplish the same thing. I will try to find the post and post it here. It sounded like a very good and cheap solution.

 

[smerc]

It would need to be a pretty thick band. Otherwise it would seem that it would get sucked into the vin. Just enough thickness to create the seal w/o sucking under it.

 

[BornInFigi]

Someone mentioned using a long rubber and that can be wrapped around the vac to accomplish the same thing. I will try to find the post and post it here. It sounded like a very good and cheap solution.

It can be accomplished with about 2" of vinyl tubbing from the plumbing section of a hardware store.

 

[DLD]

It can be accomplished with about 2" of vinyl tubbing from the plumbing section of a hardware store.

and then wrap the rubber band around that?

 

[BornInFigi]

and then wrap the rubber band around that?

No, you just heat the shit out of the tubing with hot water and shape over the valve and let it cool. After that, you can either use it as a permanent installation or as described in other posts as an adapter for pulling pressure at will.

 

[smerc]

Almost seems like it's trying to replicate the look of a rubber bushing. Probably better off just getting the rubber bushing and placing that over the valve.
Just bring the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] to the parts store and tell them it's a polycarbonate strut and it needs a new bushing @ the top. :blush:

 

[BornInFigi]

Almost seems like it's trying to replicate the look of a rubber bushing. Probably better off just getting the rubber bushing and placing that over the valve.
Just bring the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] to the parts store and tell them it's a polycarbonate strut and it needs a new bushing @ the top. :blush:

Makes sense. Lol.

 

[DLD]

No, you just heat the shit out of the tubing with hot water and shape over the valve and let it cool. After that, you can either use it as a permanent installation or as described in other posts as an adapter for pulling pressure at will.

ohhhh, I get it! Thanks Brother.

 

[BornInFigi]

ohhhh, I get it! Thanks Brother.

Yeah bra

 

[bigger7757]

Yup the Winevac that was recommended to me does not fit over the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words]. I will try to fill the holes somehow and see if that works

 

[BornInFigi]

Yup the Winevac that was recommended to me does not fit over the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words]. I will try to fill the holes somehow and see if that works

Try to make an adapter with some vinyl tubing. Heat first and stretch over the valve. This can be used as a installation or adapter to pull pressure at will.

 

[Stephmags123]

I can't get this to work. Hopefully some of these suggestions will help. I'd like to up the intensity of my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] use

 

[DLD]

I can't get this to work. Hopefully some of these suggestions will help. I'd like to up the intensity of my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] use

What problems are you having and what model [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BathMate[/words] are you using?

 

[BornInFigi]

I can't get this to work. Hopefully some of these suggestions will help. I'd like to up the intensity of my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] use

Search all the mod threads and tell us your problems if you can't figure it out.

 

[Wonkas_Willy]

For the guys who've customized their mods, can you please post pics showing what you've done? Thanks

 

[youknowme123321]

For the guys who've customized their mods, can you please post pics showing what you've done? Thanks

i could never get this to work bc/c i couldnt get the wine vac over the valve. i will try again and make a video of it

 

[DLD]

For the guys who've customized their mods, can you please post pics showing what you've done? Thanks

Good idea, I think seeing what other guys are doing will help the Brothers who can't figure it out. A video showing the process would be even better.

 

[BornInFigi]

If it was easier to post pics I would. If there is enuff intrest in the process of how to make one, I'll dig through the archive and link from where I found out how.

 

[arkailija]

View attachment 30046

View attachment 30045

That's it. That ring could be from a sex toy or maybe it was a part of a sleeve.
Anyhow, just get it over the valve and put Vacu-vin on top of it and do the work!
Really quick shots, hopefully it shows what it is about.

 

[DLD]

View attachment 30046

View attachment 30045

That's it. That ring could be from a sex toy or maybe it was a part of a sleeve.
Anyhow, just get it over the valve and put Vacu-vin on top of it and do the work!
Really quick shots, hopefully it shows what it is about.

Thank you so much for showing us a picture of your set up, I hope others will chime in with theirs...seeing this makes so much more sense than reading about it. Thanks again.

 

[youknowme123321]

View attachment 30046

View attachment 30045

That's it. That ring could be from a sex toy or maybe it was a part of a sleeve.
Anyhow, just get it over the valve and put Vacu-vin on top of it and do the work!
Really quick shots, hopefully it shows what it is about.

ARE YOU SERIOUS!!! It is that easy!!!???I will do this tonight

THANK YOU!!

 

[Wonkas_Willy]

Thanks. The pics definitely do help visualize what it is you're all talking about. Mine happens to have a square shape to it though. I'll just have to keep experimenting.

 

[DLD]

ARE YOU SERIOUS!!! It is that easy!!!???I will do this tonight

THANK YOU!!

I knew having pictures would help everyone understand better.

 

[arkailija]

Took me a while to get this thing I photographed to work, but it does work, very well actually! I also spent time trying to fit the damn original rubber cork over the valve with no luck. With [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Penomet[/words] you can jam it on quite easy, but with [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] the solution I've been using has been excellent.

If you have the square shape, just get a bit more of material, so that you can squeeze and make a seal. The round one is the easiest though, let this be a tip for future purchases.
I'm glad if the picture gave help!