Any Beer & Wine Store.
I'm in Canada and saw one at the Liquor Store but didn't buy one there. I went to China Tire and bought it there but realize I payed too much when I found one 30% cheaper at London Drugs.
You could also just buy one online.
Seek and you shall find.
 
StaffMeeting;474581 said:
Any Beer & Wine Store.
I'm in Canada and saw one at the Liquor Store but didn't buy one there. I went to China Tire and bought it there but realize I payed too much when I found one 30% cheaper at London Drugs.
You could also just buy one online.
Seek and you shall find.

I understand but I'm looking for the one that Gettinthere had because when I checked in Amazon the specific one he said he used was sold out and I bought the other ones and for some reason they wouldn't fit on the Bathmates tip so I really need help with putting it on and finding that specific one
 
StaffMeeting;474581 said:
Any Beer & Wine Store.
I'm in Canada and saw one at the Liquor Store but didn't buy one there. I went to China Tire and bought it there but realize I payed too much when I found one 30% cheaper at London Drugs.
You could also just buy one online.
Seek and you shall find.
Thank you for the advice I really appreciate it
 
Okay, I recently purchased a Vacu Vin wine saver (http://www.amazon.com/Vacu-Vin-Save...6?s=home-garden&ie=UTF8&qid=1331157336&sr=1-6) and like everybody else the stoppers dont fit the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] valve. I just ordered the skin cone (RC10). Would the stoppers I have work with the skin cone I ordered and if so would they both work on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]?
 
I wouldn't bother with this unless you can get the stuff cheaply. I purchased the Wine Vac as well and it wouldn't fit the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words], so a waste of money really. I know the skin cone thing is said to help but I aint shelling out more money at this stage. If anyone here has a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] and finds a vac piece which fits over it without other pieces to be purchased then please let us know.
 
REDZULU2003;475814 said:
I wouldn't bother with this unless you can get the stuff cheaply. I purchased the Wine Vac as well and it wouldn't fit the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words], so a waste of money really. I know the skin cone thing is said to help but I aint shelling out more money at this stage. If anyone here has a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] and finds a vac piece which fits over it without other pieces to be purchased then please let us know.

I just use the Wine Vac pump without the rubber tip on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. Just have to align it properly and should pump the water out fine. :cool:
 
Zulu,
Check my previous post on this thread. I bought a wine vacuum (I think Rabbit) is the brand from bed bath and beyond. It has 2 attachments but they are a little to thin of a diameter to bit around the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]. I modified the tips by soacking them in some boiling water then placing them over a slightly larger device for a minute. This stretched them out to a perfect size. The modification was free and there are two attachments. I will upload pics of the device if it is requested.
 
REDZULU2003;475814 said:
I wouldn't bother with this unless you can get the stuff cheaply. I purchased the Wine Vac as well and it wouldn't fit the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words], so a waste of money really. I know the skin cone thing is said to help but I aint shelling out more money at this stage. If anyone here has a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] and finds a vac piece which fits over it without other pieces to be purchased then please let us know.

Have you tried a thick rubber band on top and then putting the vacuvin pump on top of it to create a seal so no air escapes. It is works perfectly with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. By the way I use the rubber band that you get when you buy brocolli from the grocery store.
 
magiksock;475848 said:
Zulu,
Check my previous post on this thread. I bought a wine vacuum (I think Rabbit) is the brand from bed bath and beyond. It has 2 attachments but they are a little to thin of a diameter to bit around the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]. I modified the tips by soacking them in some boiling water then placing them over a slightly larger device for a minute. This stretched them out to a perfect size. The modification was free and there are two attachments. I will upload pics of the device if it is requested.
So you mean that when you boiled it in hot water the Wine Vacuum was able to stretch even more. That's nice I didn't know that. You should give out a video.
 
magiksock;475848 said:
Zulu,
Check my previous post on this thread. I bought a wine vacuum (I think Rabbit) is the brand from bed bath and beyond. It has 2 attachments but they are a little to thin of a diameter to bit around the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]. I modified the tips by soacking them in some boiling water then placing them over a slightly larger device for a minute. This stretched them out to a perfect size. The modification was free and there are two attachments. I will upload pics of the device if it is requested.
That is very interesting.
 
Adibeuzo900;475866 said:
So you mean that when you boiled it in hot water the Wine Vacuum was able to stretch even more. That's nice I didn't know that. You should give out a video.

Not a bad idea. I'll put up a video by tomorrow night. I'll update the thread when done.
 
Guys, sorry about the delay. I had some company come in town so privacy was non existent. I will deliver a write up with video (or at least pictures) by the end of the weekend (when company leaves). I hate to over promise and under deliver. Sorry about the timeline snafoo.
 
magiksock;476080 said:
Guys, sorry about the delay. I had some company come in town so privacy was non existent. I will deliver a write up with video (or at least pictures) by the end of the weekend (when company leaves). I hate to over promise and under deliver. Sorry about the timeline snafoo.
Hey Magiksock were you able to get the video
 
magiksock;476080 said:
Guys, sorry about the delay. I had some company come in town so privacy was non existent. I will deliver a write up with video (or at least pictures) by the end of the weekend (when company leaves). I hate to over promise and under deliver. Sorry about the timeline snafoo.
I would love to see it
 
magiksock;476292 said:
The previous post contains the link to the video. Thanks.
Was it able to fit in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]
 
Adibeuzo900;476309 said:
Was it able to fit in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]

I don't have a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. However, if you want to measure the release valve (the whole clear "button" and the diameter of the air release valves), I'll let you know if my wine stopper has been stretched that far. I'm pretty sure that it will fit over the air valves.
 
Help Users

You haven't joined any rooms.

    You haven't joined any rooms.
    Back
    Top