Simple mod to increase vacuum pressure WINE-VACUUM

[BornInFigi]

So I picked up a VacuVin this weekend to do the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] mod and like most i had issues getting the rubber part over the valve . What I found is You don't need any crazy mods or insane stretching to make it work or at least I didn't. Here is what worked for me.

Pump like normal till it stays on hands free.

This is optional. I got this to work without needing to stretch my rubber stop but heating it hot water and stretching it some will make it easier.

For the pump to work you don't need to have it covering the whole valve just enough to cover the 4 holes on top. Just line up the rubber on top of the holes and put the vac on and pump. It takes a moment to get the cordination down, I like to put the stop over the holes while I have it in the pump. After the first time it stays in place sealed to until I release the pressure. It takes only 10 seconds to realign and pump once you get it down.

Yeah. I no longer use the old idea of leaving the adapter on, but instead I just hold the adapter and wine vac part on there while I pump just like you said enuff to form a seal and pull a little more water out and maintain a high level of suction.

 

[DLD]

Yeah. I no longer use the old idea of leaving the adapter on, but instead I just hold the adapter and wine vac part on there while I pump just like you said enuff to form a seal and pull a little more water out and maintain a high level of suction.

Never thought of using like this, makes sense though. I will try it tonight.

 

[jackgomma]

That is a brilliant idea !

 

[DLD]

That is a brilliant idea !

Especially for the guys who can't make the attachment permanent. I never thought of using it this way but it makes sense.

 

[smerc]

Especially for the guys who can't make the attachment permanent. I never thought of using it this way but it makes sense.

Really saves a lot of headache having to fit it around the valve. Thought of that technique before, but I don't have one so I couldn't test it out. Saves some $$ though not having to purchase another product.

 

[BornInFigi]

That is a brilliant idea !

It is pretty slick.

 

[BornInFigi]

Give ma999 some rep or thanks guys. I'm mobile and there's not yet a provision for that. He's the one that brought it to light.

 

[youknowme123321]

So I picked up a VacuVin this weekend to do the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] mod and like most i had issues getting the rubber part over the valve . What I found is You don't need any crazy mods or insane stretching to make it work or at least I didn't. Here is what worked for me.

Pump like normal till it stays on hands free.

This is optional. I got this to work without needing to stretch my rubber stop but heating it hot water and stretching it some will make it easier.

For the pump to work you don't need to have it covering the whole valve just enough to cover the 4 holes on top. Just line up the rubber on top of the holes and put the vac on and pump. It takes a moment to get the cordination down, I like to put the stop over the holes while I have it in the pump. After the first time it stays in place sealed to until I release the pressure. It takes only 10 seconds to realign and pump once you get it down.

glad it worked for you. i was never able to get good suction myself

 

[ma999]

So I swear I'm not joking, lying or exaggerating but with this mod I am hitting an inch over my BPEL after only 3 days I can hit 7 without the mod and that is my BPEL.keep in mind this is only in the pump. Now I get over the top line past the measuring tape in my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x30[/words] and getting close to the opening. I am probably pumping dangerously too much now but I have no pain and I love the feeling. My girth seems like I'm not getting any expansion though and the side of my penis and especially my curve feels really sore. I hope this intense pumping finally straighten it out.

 

[smerc]

Do you have much of a fat pad?

How bad is the curve? The extra vacuum could just be straightening it out. I would watch the curve very carefully.
Is your curve peyronie's induced?

 

[ma999]

It is not peyronies. I think it's from bad masterbation habits as a kid. If it is just Straightening it that would better than length to me at this point, though it's awesome seeing your length goal. The curve has always made me self conscious as mine is pretty severe, and I believe is causing my wife discomfort during sex.

 

[ma999]

Also I do have a bit of a fat pad.

 

[DLD]

It is not peyronies. I think it's from bad masterbation habits as a kid. If it is just Straightening it that would better than length to me at this point, though it's awesome seeing your length goal. The curve has always made me self conscious as mine is pretty severe, and I believe is causing my wife discomfort during sex.

This sounds to be uneven ligaments if it was masturbation induced. I would spend some time favoring the uneven side in masturbation and stretching. If the curve goes to the shaft erect jelqing against the curve would be best. As far as equipment goes the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words] is a great way to correct a curve through multiple sessions each day at a good intensity. You can adjust the base screws and bars to accommodate any uneven ligaments. Also, erect pumping using your [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BathMate[/words] would also go to straightening out things. Good luck Brother.

 

[smerc]

It is not peyronies. I think it's from bad masterbation habits as a kid. If it is just Straightening it that would better than length to me at this point, though it's awesome seeing your length goal. The curve has always made me self conscious as mine is pretty severe, and I believe is causing my wife discomfort during sex.

That's better then. Not sure if it happens, but it seems like you could reopen scar tissue or move it around to the point where you're creating more scar tissue(s). Therefore causing an even bigger bend. If it was related to peyronie's.

Are you noticing a reduction of bend once outside the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words]? Even if only temporary.

Not sure what to conclude on the BPEL gain. I'm sure it's not related to your pad since the added pressure shouldn't had sucked the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] closer to your body to achieve another inch. You should had already noticed that w/o the wine vac mod. Just be thankful it happened. I don't hear of any mods causing an inch increase compared to previous results done w/ a PE device. Take it and run all the way to the finish line w/ it

 

[ma999]

I just want to be clear. I have not gained an inch outside the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] but inside I'm getting an inch over my BPEL. I haven't been able to tell yet. It seems straighter but my EQ has always been shit and have to pump mostly flaccid. Speaking of flaccid my flaccid length as been the longest I ever seen and missed almost two days and still long for me. I report back at the end of the week on if it's straighter already when I have sex and EQ improves.

 

[smerc]

Yeah, I was understanding that (BPEL in the tube). Hopefully you do get the EQ increase and keep some of those gains.
Are you doing any jelqing against the curve? Trying to mold it the other way I mean.

 

[ma999]

Yeah, I was understanding that (BPEL in the tube). Hopefully you do get the EQ increase and keep some of those gains.
Are you doing any jelqing against the curve? Trying to mold it the other way I mean.

I've tried in the past and had no luck. I honestly might been doing it wrong and been thinking of trying. Mine also kinda started to twist over the years like it lays straight down flaccid but sideways.I do think it is getting straighter and really feel the soreness on the side of the curve.

On another note I might be pushing the pumping but I maxed out the length of my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x30[/words] last night thanks to this mod! I even made my wife come look who just shook her head and walked away lol. Im not sure when I should switch to my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x40[/words] now though. I'm really wanting girth so maybe wait and try packing the tube more before switching?

 

[smerc]

On another note I might be pushing the pumping but I maxed out the length of my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]x30[/words] last night thanks to this mod!

How far away are you from maxing out the girth?

I'm really wanting girth so maybe wait and try packing the tube more before switching?

That's what I would do. Unless you're not that far away from maxing out the girth.

 

[ma999]

I think I'm getting their but have some time. I don't get any gator bite yet. One thing I learned is the pump is diceving. If I stand next to a mirror I can see the where I'm hitting and where I'm not .

 

[BornInFigi]

wetholefans

Ban