superman05xx;691246 said:
My bad on the pricing issue, so I have edited my review to reflect the price with a proper rating in the value section.

My modification was super simple. All I did was take a drill bit (1/8) and drill around in the current holes on the top compression board to open up more space (wasn't an exact science, I just freed enough enough space so that the screw could fit inside and that I could slide the board along the screws ... But not too much space).

*What I mean by top compression board is the one closest to the [words=http://www.mattersofsize.com/join-now.html]power assist[/words] section.

The bottom compression board did not need any drill modifications, I just put the screws in and screwed them in (all the way) by hand/with a wrench and this alone was perfect. Of course this required a little bit of force since the bottom compression board did not previous have screw marks and wasn't designed for the 5/16 but being that the material is fairly soft, it was pretty easy. This setup for the bottom compression board means the screws don't move at all while putting on the device which makes putting it on easier.

The [words=http://www.mattersofsize.com/join-now.html]power assist[/words] section did not need any modifications because its holes are big enough to accept 5/18 screws.

Your advice made it to LIGHTNING and he will be making these modifications on next run. Thanks for your advice and reviews.
 
Muffbuster;691553 said:
Excellent! Now I'll have to get out the drill. This is what I love about our Brotherhood. Sharing knowledge to make the gains come easier. I feel blessed to belong here.

Definitely! I am glad he gave us his feedback and modifications or we would never have known. The Brotherhood is a good place!
 
I just did my first successful "experimental" workout with my [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]lengthmaster[/words]. The device is so versatile and reliable. There are so many options to bend, twist, pull, etc. From here I will find out what will work better for me to finally enlarge my septum.

Also the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]lengthmaster[/words] is great quality. Light, heavy duty.
 
Jackxxx;696037 said:
I just did my first successful "experimental" workout with my [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]lengthmaster[/words]. The device is so versatile and reliable. There are so many options to bend, twist, pull, etc. From here I will find out what will work better for me to finally enlarge my septum.

Also the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]lengthmaster[/words] is great quality. Light, heavy duty.

Thank you for your review! Yes, there is so much that can be done with the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LengthMaster[/words], so much. It is like having a free ticket to the Disney World of Cock.
 
hi dld, have the modifications been made to the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]length master[/words] to address what superman05xx modified on his [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]length master[/words]?
 
Can you gain 2-3 inches with the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]lengthmaster[/words] if youve never worked on length? Im at 5.4 non-bone pressed i think 6.5-6.75 bone pressed and id like to get to 7.5-8. Is it possible or rather normal to gain that much?
 
he he... I got my unit today and I gave it a try. I have been surprised how easy it was to setup with a sleeve. It was quite comfortable for the 12 minutes that my first work-out lasted (6 mins roll,s 6 mins twists).

There is a thing that kinda made me smile... Given my starting size, any lengthmaster sessions for me *IS* expressive stretching.....

I went slow and safe for the first session. The focus was on getting used on how it works rather than go all in and hurt myself right away. My first impression is that I have felt the potential of the device as being possibly the most powerful way to stretch.... I cannot think of any other way to efficiently perform twists and rolls stretches...

small problem but I expect MOS to fix it pretty fast... The silisleeves that are supposed to be bundled with the LM were missing... Fortunately, I got fews from autoextender around...
 
he he... I got my unit today and I gave it a try. I have been surprised how easy it was to setup with a sleeve. It was quite comfortable for the 12 minutes that my first work-out lasted (6 mins roll,s 6 mins twists).

There is a thing that kinda made me smile... Given my starting size, any lengthmaster sessions for me *IS* expressive stretching.....

I went slow and safe for the first session. The focus was on getting used on how it works rather than go all in and hurt myself right away. My first impression is that I have felt the potential of the device as being possibly the most powerful way to stretch.... I cannot think of any other way to efficiently perform twists and rolls stretches...

small problem but I expect MOS to fix it pretty fast... The silisleeves that are supposed to be bundled with the LM were missing... Fortunately, I got fews from autoextender around...

Thanks for the feedback my brother every bit of it is like gold to us. We desire more than anything to make the most highest quality tools and accessories.
 
Awesome product DLD. I had the original and decided to buy the 2.0 because I only have time for a ninja routine and these thing rock for intense manual like stretches. I really didn't fully utilize this thing in my past career, I used the piss out of the PA but the old lengthmaster was a little more uncomfortable because of the magnets. I think taking them out and going with the gripper material was the right call.

I might try superman05xx mods above. One of the longer bolts has already been bent slightly so it makes getting it off a little tricky.

Also as it's set up now the gripping pressure is what Bib would call toe in, where the the end closer to the head of your penis is narrower than its back end. I usually like a toe out in my hangers. That would require flipping the lengthmaster around but then the nylon string is in the way. What would be cool to see is more than one bolt hole location on each wing of the lengthmaster. Just something to think about. I know hole spacing and redesign could be an issue, as it stands now its working just fine though.

My come back routine is short and intense and I will add ADS to that mix soon. I'm already getting very nice Positive PI's. And now that I have 2 PA's I might do some experimenting with different stretches running through my head.
 
Awesome product DLD. I had the original and decided to buy the 2.0 because I only have time for a ninja routine and these thing rock for intense manual like stretches. I really didn't fully utilize this thing in my past career, I used the piss out of the PA but the old lengthmaster was a little more uncomfortable because of the magnets. I think taking them out and going with the gripper material was the right call.

I might try superman05xx mods above. One of the longer bolts has already been bent slightly so it makes getting it off a little tricky.

Also as it's set up now the gripping pressure is what Bib would call toe in, where the the end closer to the head of your penis is narrower than its back end. I usually like a toe out in my hangers. That would require flipping the lengthmaster around but then the nylon string is in the way. What would be cool to see is more than one bolt hole location on each wing of the lengthmaster. Just something to think about. I know hole spacing and redesign could be an issue, as it stands now its working just fine though.

My come back routine is short and intense and I will add ADS to that mix soon. I'm already getting very nice Positive PI's. And now that I have 2 PA's I might do some experimenting with different stretches running through my head.


Thank you so much my brother I would truly appreciate it if you copy this and go to the store and post it as a review under lengrhmaster. People need to hear honest reviews because so many miss out on such a powerful tool. I’m so happy for you my brother!
 
Can you gain 2-3 inches with the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]lengthmaster[/words] if youve never worked on length? Im at 5.4 non-bone pressed i think 6.5-6.75 bone pressed and id like to get to 7.5-8. Is it possible or rather normal to gain that much?

I've gained 2.5 inches from using the length master.
 
LengthMaster 3 are the best device on the market for length increase.

I got over 3 Inch BPEL increase with that thing, and a lot more flaccid penis as well.
- I did use my bare hands and a broomstick in the beginning, but that was only like 1 month or something like that.

I should probably write a review at MoS Shop.
 
LengthMaster 3 are the best device on the market for length increase.

I got over 3 Inch BPEL increase with that thing, and a lot more flaccid penis as well.
- I did use my bare hands and a broomstick in the beginning, but that was only like 1 month or something like that.

I should probably write a review at MoS Shop.
Posting a review is so important and I hope other people follow your trend.
 
I wanted to share my personal experience in case it helps someone avoid wasting money or risking harm.

A while ago, I tried using a penile traction device to correct a curvature. I followed all the recommendations — the wearing schedule, the tension guidelines, everything. Unfortunately, I saw no improvement at all. The curvature remained exactly the same.

What’s worse, these devices are not risk-free. Prolonged stretching can potentially cause pain, numbness, or even permanent damage to the tissue. I didn’t suffer major harm, but I did experience discomfort and was worried enough to stop after seeing no results in a year.

Please don’t be fooled by promises of an “easy” or “lucrative” fix for penile length or curvature — they simply do not work. Penile traction devices are not safe to use at all, and can cause lasting damage. Avoid them entirely and protect your health. There are safer, evidence-based treatment options out there, and your health isn’t worth the gamble.
 
I wanted to share my personal experience in case it helps someone avoid wasting money or risking harm.

A while ago, I tried using a penile traction device to correct a curvature. I followed all the recommendations — the wearing schedule, the tension guidelines, everything. Unfortunately, I saw no improvement at all. The curvature remained exactly the same.

What’s worse, these devices are not risk-free. Prolonged stretching can potentially cause pain, numbness, or even permanent damage to the tissue. I didn’t suffer major harm, but I did experience discomfort and was worried enough to stop after seeing no results in a year.

Please don’t be fooled by promises of an “easy” or “lucrative” fix for penile length or curvature — they simply do not work. Penile traction devices are not safe to use at all, and can cause lasting damage. Avoid them entirely and protect your health. There are safer, evidence-based treatment options out there, and your health isn’t worth the gamble.

Thank you, brother, for your honest opinion. Just out of curiosty, which traction device(s) did you use? According to your statement, it appears you're using an extender traction device.

Just for clarification, traction device wearing alone WILL NOT magically helps to correct the issues. When the penile tissues are scarred, which happens to fall into the Peyronie's categories, there are more than just a specific wear it and forget it. There are many discussions, logs, and procedures here that have been documented over the decades to ensure the device usages are properly taken account of. Most manufacturers will simply hyper inflate the products from a small selection of users. Forums like this brotherhood, we have thousands of real users with specific reports and logs, covering extended ranges of issues from Peyronie's to simple enhancement.

However, everything must be approached with care and safety at the forefront. If you slap a device onto your penis without first understanding the dynamic nature of your penis, it's like giving a teenager a sport car and tell them to drive and learn from their mistakes. This is why the community like MoS is here to answer as much questions and provides details as much as possible to answer all possible areas before any brothers take on the PE journey, be for Peyronie's or for simple PE.

We're truly sadden to see that your year of traction usage failed to provide results. However, what was done may not have followed the biodynamic requirements for PE.
 
Back
Top