thependulum;531673 said:
Oh I just replied to that thread I didn't realize you could see it in those pics either lol

Yeah man I'm all over the place, I've only been doing basic Bathmateing in the tub, as in just leaving it on for twenty or so and using the vac vin occasionally. I need to get the sleeves and my adult entertainment situation organized! Never ends
 
CuriousMate;532600 said:
Yeah man I'm all over the place, I've only been doing basic Bathmateing in the tub, as in just leaving it on for twenty or so and using the vac vin occasionally. I need to get the sleeves and my adult entertainment situation organized! Never ends

You should really start doing super sets instead of 20 minutes straight. I used to get alot of fluid retention doing 20min straight
 
Oh I know, a few months ago when I started doing SuperDicks, or part, o his routine, I noticed the head wasn't that big but more uniform! Man, it's just, well we're all here for the obvious reason... I just really look forward to the day when my dick size won't bother me.
 
thependulum;532615 said:
you should really start doing super sets instead of 20 minutes straight. I used to get alot of fluid retention doing 20min straight

want1038-1.jpg
 
hi i ordered these sleeves and couldn't wait to try them! but i was disappointed because i couldn't get a good seal! i am using the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words], and i tried it without the comfort ring. i tried the technique of attaching it, then pulling it out to fill the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] with water, slide it back in, but i still couldn't get it to work properly! it would lose alot of water and/or it seems it pumped out more water. and the seal wouldn't last long at all. i got completely fed up and mad lol that i just entirely skipped my whole [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] session for the night. i had hope in this because i have turkey neck and thought / read it might help out with that?
 
also i made a thread in the newbie section, not sure if it went through but then again i saw a short half a second message saying they need to be approved? how long until a thread goes through?
 
lol wth idk maybe cuz im new i have to be monitored for awhile and threads/replies are moderated? idk im bout to check the faq's

edit i know im not trippin cuz i just left a reply before this one and it said it had to be approved...

but here is my thread i was speaking of http://www.mattersofsize.com/forum/...t-Also-questions-regarding-tight-circumcision

any input please

and yet another failure tonight when trying to use the sleeve with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]. its very discouraging
 
Last edited:
hepcat;537340 said:
No limit, you just have only ten minutes to do your editing.

also because i look at my other past replies, as well as the thread i made and the "edit" button /option is no longer there? like i cant even edit them anymore
 
tanys1028;537468 said:
Bro

Which sleeve should i choose for use with [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]? There are two links with different sleeves



Any help for this?
 
tanys1028;537902 said:
DLD u mean sleeves from both links can be fitted on [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]?

Yes, sorry about that...someone was talking to me while I was posting.
 
so i finally got my sleeves to work, i had to cut some off both edges. i must agree it DOES make it more comfortable ALTHOUGH, i end up with ALOT LESS water in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]??? 1 or 2 pumps and i already lose alot of water?? which i feel is not a good thing cause shouldn't it have as much water in it as possible? so i took the sleeve out and just did used it normal
 
I think thick is great, but will also depends on it's constrictability, you know? You want it to be thick and allow some wiggle room, but you also want it to be tight enough to grip. Being too tight will never be a problem if you can't get in it in the first place though. You get what I'm saying. Just don't get stuck, lol.
 
I am having some problems with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]penomet[/words] that this looks like it might solve, has anyone tried this with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]penomet[/words] and had it work?
 
That was an excellent post, and an awesome tutorial. Repped you for it, and thank you for taking the time to share this with everyone here. I have already shared this three other places, giving you credit ofcourse. Excellent advice. For anyone else looking at this, you can buy these universal pump sleeves from amazon for like 7 bucks. heres the link;

http://www.amazon.com/California-Exotics-Universal-Replace-Sleeves/dp/B002JINMJC

I only shared that because I have amazon prime, so its free shipping. Gotta love amazon prime!

ANTDOGG;419474 said:
As you guys know I recently found some universal pump sleeves on the extreme restraints website which I received yesterday. I can honestly say that I've have had the best [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] session with absolutely no pain at all. Okay so as you can see from pumpsleeve pic 1 they come in a pack of 2 which is tan and black. You simply put the sleeve over the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] and as you can see from pumpsleeve pic 5 I put over the bottom 2 (or 1 I should say since it combines together) and leave the other gator rings exposed. Now I know from pumpsleeve pic 6 that some of you guys are going to love putting your penis in your [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] now because.... well the pic says it all LOL. Ok after getting everything ready instead of having to lube the inside of the gator and having to clean up as you normally would, this thing makes it much easier to clean as you only lube up the instead of the sleeve and not the gator now. The first time I tried to use flaccid and I'll let you know right now that this is not going to work unless you break it in, in a few uses because the first time squeezing your penis through that hole is not going to work so make sure you are at least 75% erect or fully erect when using it for the first few times. Okay so after I get going and I'm fully pumped to where I can't go anymore I immediately notice the comfort and no skin pinching in the ridges what so ever. I did it the regular way for 20 min straight with no SSJs since it seemed when I was not using the sleeve that if I went for 20 min the pain at the base would be the worst when you were done. You guys know when you try pumping during your session you can feel the ridges digging into the skin causing pain when your trying to pump for higher numbers well with this I felt none of that. Anyhow at the end when I took it off you do see the shape from the ridges on your base but there was absolutely no pain when I was done and the ridges where gone in a matter of minutes. I can honestly say that this was the best [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] session I ever had and I now want to do it even more (not just cause of pic 6 either.....well maybe). As for suction, it seemed the same but I felt I could go a little higher since I didn't shave down there yet. Oh yeah, you guys notice when you don't shave and you may feel a little less suction and hair being pulled into the ridges, well not with this I felt none of that at all. For the best [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] session however do shave as I normally do. So for the suction it seemed the same. Comfort and pain just seem to disappear and clean up couldn't have been any easier since all you do is take it off wipe your [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] off and wash the sleeve. Durability seems like it will make it last a long time which would be cheaper then buying condoms all the time lol but we'll see down the road. The only thing I had a little trouble with was fulling it up with water in the tub but no trouble fulling it up with water out of the tub because when you put it under water it seemed to not want to fill but after the first few tries I could fill it up pretty easily in the tub under water. One thing I did notice is that it seems to only target the penis meaning it prevents most if not all of the skin from the balls being sucked in. I still will hold my balls out of the way but with this I could pump and not have to hold my balls out of the way which was great. Well guys that's my review of the pump sleeve and hope you guys find this helpful. I did notice 2 links for the pump sleeve on the site for the ones I bought and I think the more expensive one comes in different sizes but don't quote me on that as I just paid for the $5.50 one which fits perfectly around the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] and should the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] but [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] users should not need this as this is just for using the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] with comfort and without pain. Here are the links

http://www.extremerestraints.com/penis-pumps_62/universal-replacement-pump-sleeves_2674.html

http://www.extremerestraints.com/pe.../universal-replacement-pump-sleeves_4821.html
 
Is there Anyone with an [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] or [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]penoment[/words] that uses sleeves?
 
thependulum;543480 said:
Is there Anyone with an [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] or [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]penoment[/words] that uses sleeves?

Many people, what is the question my friend?
 
thependulum;543513 said:
Just wondering if the sleeves fit the bigger pumps

Yes they do, right up to the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words].
 
Hey OP thanks for sharing, I received my sleeves yesterday. Hopefully get my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] in soon! Can't wait!
 
Rude_God;544487 said:
anyone here own/owned a max vac? It seems that the sleeves for use with that might be good to use for this purpose.

Yes, they would work fine. Also, I am not sure when, but very soon [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Penomet[/words] will have their pump sleeve ready and I can tell you it is insane! I got to try it in Miami 6 months back and it is SUPenis EnlargementR comfy with tremendous pressure hold.
 
Can this be used as a replacement for the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words]? Mine came off & now my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] is useless as it won't get suction.
 
Neutronstar;545302 said:
Pump Sleve works only if penis girth is no bigger than 3.5 inch.

yesterday i had three different one. i got 2 from sex shop, and one i ordered from amazon California Universal pump sleve
one like yellow and one black , i guess u know which one i am talking about..

I tried today and i couldn't fit my dick in. Some how i did put me dick on then what happen after surprised me.

In general when i pump i am on 197 mm nearly 200mm . With sleeve on i couldn't reach 180 and my dick was stuck and started to get thicker before reaching 197 which is my limit.

The only away to make good pumping is [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words], especially those cleaning clothes i use

i know some of u will not agree with me but hey maybe we are different even when it comes to [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words].
But seriously guys with girth 4.5+ dont waste your time with sleves thx.

Did you use the sleeve as is or cut a bigger opening before using it? Works much better if you cut a bigger opening before hand. I fill the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] girth wise and it helps me alot.
 
Just ordered one set. Cost me $21 CDN with shipping. In the comments section I wrote "a gift for my grandfather"

Jakb, my natural girth is 5.75". I can easily fill the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. I will be using these sleeves with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Herc[/words]. Will I need to cut them to fit me and what is the best way to go about doing that? Thx
 
will these fix all sucking on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words]?

will the latex grip the skin near my nuts preventing it from being sucked in or o these work in a different way? i dont get ow these things make any diff please advise

thanks
 
stk2013;562411 said:
will these fix all sucking on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words]?

will the latex grip the skin near my nuts preventing it from being sucked in or o these work in a different way? i dont get ow these things make any diff please advise

thanks

They are more for smaller pumps. Pumps where the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiters[/words] leave rings on your base because your base is too big for the pump. Ie [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. Makes it so the latex sleeve is being sucked into your base, not the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words]. So hopefully it leaves no rings.

What is your girth and length? I am wondering how big you have to be to use [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words]
 
MikeShlort;562431 said:
They are more for smaller pumps. Pumps where the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiters[/words] leave rings on your base because your base is too big for the pump. Ie [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. Makes it so the latex sleeve is being sucked into your base, not the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words]. So hopefully it leaves no rings.

What is your girth and length? I am wondering how big you have to be to use [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words]

tbh i think i made a mistake getting the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] i should have got the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words].

flacid

4-4.5" long
4.23" girth

erect

6.5" long
5" middle 4.5" base :( girth

i all so think i have very odd balls i will be posting next week some pics and a pic of the problem with me nuts getting raped against the comfort ring.

i would have got the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] but im sure i read i would be ok in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] and tbh this is a one off if i had ot grew the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] i would never get the money for a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] in the future.
 
U need the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. For sure. The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] is bigger in girth than the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. And not sure why you bought the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words]. You're getting sucked in because you aren't big enough for the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words]. I have the same problem with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words].

What I would do is try to return the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words]. Buy the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. You will take many months of dedicated and intelligent effort to max out the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. At that point, purchase the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words].

If you can't return the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words], the good news is, if you figure out how to use a pump that is too big for you, it will give you mostly base girth gains. So you could use the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] after you've done your [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]/x40 workout for that extra base girth expansion.
 
MikeShlort;562508 said:
U need the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. For sure. The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] is bigger in girth than the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. And not sure why you bought the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words]. You're getting sucked in because you aren't big enough for the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words]. I have the same problem with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words].

What I would do is try to return the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words]. Buy the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. You will take many months of dedicated and intelligent effort to max out the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. At that point, purchase the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words].

If you can't return the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words], the good news is, if you figure out how to use a pump that is too big for you, it will give you mostly base girth gains. So you could use the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] after you've done your [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]/x40 workout for that extra base girth expansion.

thanks for the advice mate.

ok so its to big for me now but later on it wont be i hope so here is my plan

i cant afford another [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] etc so maybe if i get an airpump a smaller one there cheaper so heres me plan pump up to max on airpump and hopefully i should get bigger temp gains because its better suited to my size (i heard the closer to the walls of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] the better it is it would explain why i dont see much gains in my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] its just to big for me so i hope get get gain bigger with a better suited size airpump).

then once i have done that i will go into the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] and hope it helps with my issue.

would this sound possible?.

thanks
 
stk2013;563422 said:
thanks for the advice mate.

ok so its to big for me now but later on it wont be i hope so here is my plan

i cant afford another [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] etc so maybe if i get an airpump a smaller one there cheaper so heres me plan pump up to max on airpump and hopefully i should get bigger temp gains because its better suited to my size (i heard the closer to the walls of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] the better it is it would explain why i dont see much gains in my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] its just to big for me so i hope get get gain bigger with a better suited size airpump).

then once i have done that i will go into the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] and hope it helps with my issue.

would this sound possible?.

thanks

Sounds possible. But the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] is only $110 Canadian (Must be cheaper in US). How much are the air pumps? If you could get one for like $50 I'd say it's worth saving the $50. But if its close to the price of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words], I'd say go with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words].

That being said, I've never used an air pump. I have heard from many users on this forum who have used air pumps that once they tried a water pump, they stopped using their air pumps.

Jakb is the guy to talk to about pumps. He knows way more than I. He owns 3 Bathmates, a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]penomet[/words], and air pumps.

But I'm pretty sure if you can afford it the water pump is the way to go. The suction on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] is legit. Not sure how the air pumps are.

Ask jakb the difference between air pumps and water pumps. He'll probably respond if you post your question in this thread: http://www.mattersofsize.com/forum/...At-7-7-x-5-2-is-the-X-40-the-one-to-buy/page2

Also, read that whole thread. He answers a lot of my questions about the pumps and gives measurements. You could always PM him too but I;m sure he would respond in that thread, plus you would give other users a chance to see his answers to your questions.

In the meantime, don't give up on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words]. I am a skinny fucker, I have the bone structure of many North American women. I figured out how to use the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] (which is bigger than the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words]) and get a good pump. Took me at least a week of fucking around before I figured out how to use it the best I could. Yes, it sucked in my whole pelvis and I had to hold my balls so they woudln't get sucked in, but I figured it out and it made my base girth thick and my penis thick. So get to work with your [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] until you decide what pump is best for you.
 
By the time I got my penis through the rubber, a lot of the water was gone. How do i solve this problem? I couldn't get any pressure with this sleve on and I've been using the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] for 1 year. Please help I love the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] gains, but i hate the ridges and marks it leaves
 
Last edited:
bossbinz;564446 said:
By the time I got my penis through the rubber, a lot of the water was gone. How do i solve this problem? I couldn't get any pressure with this sleve on and I've been using the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] for 1 year. Please help I love the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] gains, but i hate the ridges and marks it leaves

Lube your penis. Go in erect. Cut vertical slits in the rubber so the opening has less resistance.
 
For a long time now I've been reading threads but never posted, for now a quick 1st time post.
Are you aware that [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] make an alternate [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words] for at least the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words]/40 that basically has an extended insert tube I ordered one for my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] & 40 arrived earlier this week. It's not mentioned on even the manufacturers website and I only found out about it from a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] employee who mentioned it on another forum, so I contacted [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] and ordered. Like so many other I have issues with [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words] bite, so far tried new insert couple times and no issue of cause with bite or any other discomfort so far(when the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words] is fully compress or close to it you can see part of the tube start to show in the main section past the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words])
My balls always get pulled up to be right at the base of [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words] (however that doesn't caused any discomfort, only if skin inside happened to get caught in [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words] when compressed)
A couple thing's [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] told me they are considering future [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words]'s to have longer insert as standard it already comes with [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Xtreme[/words] 30/40(btw [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]xtreme[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] is available ltd pre release, i've ordered it)

The longer insert does take away small amount of space for girth so if say you are almost maxing out [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] the longer insert might make u max out.
See how I go with it next few days also try it out with [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words].
 
So just to be clear there is no point in ordering this if you are going to buy the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Xtreme[/words]?
 
smokey622;564579 said:
No as in No you don't need it or? No you SHOULD order it?

No as in try it out for yourself and see if you get [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words] biters and need it.
 
smokey622;564475 said:
So just to be clear there is no point in ordering this if you are going to buy the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Xtreme[/words]?
No you don't need to order the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words]-longer insert if you are getting either [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Xtreme[/words] 30 or 40 as they come with it and I gather its exactly the same as the one you can order for just the standard [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] & [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words]. I should get [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Xtreme[/words] 40 sometime next week can let you know exactly what's in that one...

Not sure what at this point [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] isn't advertising the fact that for at least the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] & [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] you have the option of getting a longer tube insert.
 
View attachment 27763
Took a quick photo of the longer [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words] insert you can get for [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words](left) & [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words](right), assume its exactly the same longer style that comes with [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Xtreme[/words] 30/40
 
Last edited:
I bought the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x40[/words] that came with a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words].

Is the universal pump sleeve more comfortable than the standard [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words] that is provided with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x 30[/words]?
 
Back
Top