Progress thread Harnessing the power of The Booty Breaker

BIGDADDYBOOTYBREAKER · Jan 13, 2026

oldandlively said:
Hm. Try to wrap your nut sac with a flexible tape or a piece of long cloth, like a band, pull the nut sac completely back under your legs, sit on the cloth band, and then pump. Think of the cloth band like a reverse g-string for your nut sac. That should work pretty well. Works on a majority of the brothers with long and looser scrotal sac.

I will give it a shot, I tried holding it back with my hand and had some success but the skin still slipped it a bit. I may need some time building that base, its dam close. But I am paranoid of getting by balls sucked in hahahahhaha It just sounds sooo painful.

DLD · Jan 13, 2026

oldandlively said:
Hm. Try to wrap your nut sac with a flexible tape or a piece of long cloth, like a band, pull the nut sac completely back under your legs, sit on the cloth band, and then pump. Think of the cloth band like a reverse g-string for your nut sac. That should work pretty well. Works on a majority of the brothers with long and looser scrotal sac.

That's exactly what I was going to say. Some people need to tie back their nuts to avoid suck in.

BIGDADDYBOOTYBREAKER · Jan 13, 2026

Tried wrapping my balls in Ace Wrap but they dont really hang low enough to get a good grip.

I packed the 1.75” cylinder in record time today. In just 27 mins it was packed, so I moved into the 2” what I ended up doing is start at a very low pressure and slowly increased it to 5hg to try and get it to grip the base properly. I was able to raise the pressure to 10 hg in spots. But I couldnt tolerate it much so I kept it at 5hg which was no longer producing expansion or atleast fast enough expansion for it to be visibly noticeable to me. So I did about 25-30 mins and got out.

In summary.

1.75”,30 mins, 8-10hg
2”, 20-30 mins 3-5hg

The work is cut out for me fellas, the 2” cylinder must be conquered. Made a bet with Mr. Trump that I would conquer the 2” cylinder before he takes Greenland.

DLD · Jan 14, 2026

BIGDADDYBOOTYBREAKER said:
Tried wrapping my balls in Ace Wrap but they dont really hang low enough to get a good grip.

I packed the 1.75” cylinder in record time today. In just 27 mins it was packed, so I moved into the 2” what I ended up doing is start at a very low pressure and slowly increased it to 5hg to try and get it to grip the base properly. I was able to raise the pressure to 10 hg in spots. But I couldnt tolerate it much so I kept it at 5hg which was no longer producing expansion or atleast fast enough expansion for it to be visibly noticeable to me. So I did about 25-30 mins and got out.

In summary.

1.75”,30 mins, 8-10hg
2”, 20-30 mins 3-5hg

The work is cut out for me fellas, the 2” cylinder must be conquered. Made a bet with Mr. Trump that I would conquer the 2” cylinder before he takes Greenland.

BIGDADDYBOOTYBREAKER · Jan 14, 2026

I packed that 1.75” cylinder even faster today… This transition from 1.75” to the 2” is proving to be tricky but the ease in which I am packing the 1.75” cylinder must be some sort of indicator its coming.

I packed the 1.75” cylinder well under 30 mins today but I stayed in for 30 mins total. And attempted the 2”… after some back and forth trial and error. I gave the Ace wrap around the nuts a second chance to try and keep the nuts out. My nuts dont hang that much so I had to pull them a lil bit and strangle them with the ace wrap, put each end under each thigh and it work. Felt like I was strangling my balls but after the cylinder gripped the base good enough I let em loose.

Still wayssss away from packing this cylinder, but I am hoping to be chipping away at it slowly by consistently working on it. Spending time in it. I will pack it before Trump takes Greenland 100%

BIGDADDYBOOTYBREAKER · Jan 15, 2026

Not gonna lie, I nearly pumped my dick off right now. Spent 30 mins in the 1.75” 7-10hg, Then another 30 mins on the 2” cylinder 5-10hg, I feel like today a small breakthrough was made. I was in the flow, felt confortable at 10hg, the penis was swelling like a champ. For a second I had a completely irrational thought, “I will just stay here till I pack it” but cooler minds prevailed and called it at 30 mins… baby steps… Id be suprised if I do not have a monster edema tomorrow. I hope not, if don't I’m gonna pump this monster again.

Big Schwanz Acht · Jan 16, 2026

BIGDADDYBOOTYBREAKER said:
I pumped the monster today, again 5hg in the 1.75” for an hour. I freestyled it for roughly 10-15 more mins of overpacking to let that thickness settle. Once I pack it under 30 mins the transition to the 2” cylinder will begin, we still got ways to go. But I did notice I packed it slightly faster and my dick went down a bit further down the cylinder.

I don't think 5hg is going to have much impact...that's barely above the pressure of a natural erection. Can you slowly ramp-up to 10hg?

oldandlively · Jan 16, 2026

Big Schwanz Acht said:
I don't think 5hg is going to have much impact...that's barely above the pressure of a natural erection. Can you slowly ramp-up to 10hg?

That's the trick. From 5 and slowly ramp up to 7, and in the later set, ramp from 7 to 10, but bounce between the two pressures every 30 seconds. The studies indicated high static pressures does more harm than good for the blood vessels, not the tunica and septum. Low pressure at 5 to moderate at 6 can be prolong a bit more, but not more than 10 minutes at a time.

BIGDADDYBOOTYBREAKER · Jan 16, 2026

Big Schwanz Acht said:
I don't think 5hg is going to have much impact...that's barely above the pressure of a natural erection. Can you slowly ramp-up to 10hg?

Keep scrolling bro.

Big Schwanz Acht · Jan 16, 2026

BIGDADDYBOOTYBREAKER said:
Keep scrolling bro.

my bad...

DLD · Jan 16, 2026

BIGDADDYBOOTYBREAKER said:
Tried wrapping my balls in Ace Wrap but they dont really hang low enough to get a good grip.

I packed the 1.75” cylinder in record time today. In just 27 mins it was packed, so I moved into the 2” what I ended up doing is start at a very low pressure and slowly increased it to 5hg to try and get it to grip the base properly. I was able to raise the pressure to 10 hg in spots. But I couldnt tolerate it much so I kept it at 5hg which was no longer producing expansion or atleast fast enough expansion for it to be visibly noticeable to me. So I did about 25-30 mins and got out.

In summary.

1.75”,30 mins, 8-10hg
2”, 20-30 mins 3-5hg

The work is cut out for me fellas, the 2” cylinder must be conquered. Made a bet with Mr. Trump that I would conquer the 2” cylinder before he takes Greenland.

BIGDADDYBOOTYBREAKER · Jan 17, 2026

So I forgot to post last night because I attended a bday dinner, it ran late. But around 11:30 pm I got in the pump, did the usual of packing the 1.75” cylinder total time around 30-40 mins in that cylinder and then tried to get comfortable in the 2” cylinder spent about 30 mins in that one, nowhere near packing it yet.

Then this morning, got in the 1.75” but this time I took it easy, cruising at 5-7hg packing it slowly. Then again got in the 2” but not for long maybe 10-15 mins I had things to do. I must say, this time the Ace wrap around my balls worked incredibly well.

Now I am about to get in the tubes again, for realz. Bout to pump my dick off yall, make the hoes say no when they see that thing.

BIGDADDYBOOTYBREAKER · Jan 17, 2026

Same as always… I was actually able to start on the 2” cylinder this time. But idk starting out on the smaller 1.75” cylinder just feels better. So I went back down after 10 mins or so. I pumped for about 1h30m basically packed the 1.75” and went up to the 2” for a little bit 15-20 mins then back down just to finish off. I was nowhere near packing the 2” cylinder anyways.

Not super comfortable with high pressures either. 10 hg is pretty uncomfortable can hold it for 10-15 mins at most, 7-8hg I endure it for longer periods of time but with discomfort. And I can cruise at 5hg but after some time
in the cylinder it stalls and you stop expanding.

DLD · Jan 18, 2026

BIGDADDYBOOTYBREAKER said:
Same as always… I was actually able to start on the 2” cylinder this time. But idk starting out on the smaller 1.75” cylinder just feels better. So I went back down after 10 mins or so. I pumped for about 1h30m basically packed the 1.75” and went up to the 2” for a little bit 15-20 mins then back down just to finish off. I was nowhere near packing the 2” cylinder anyways.

Not super comfortable with high pressures either. 10 hg is pretty uncomfortable can hold it for 10-15 mins at most, 7-8hg I endure it for longer periods of time but with discomfort. And I can cruise at 5hg but after some time
in the cylinder it stalls and you stop expanding.

Then, stick with the 7-8hg. There's never a rush.Do what you can do at the time that you can do it. And eventually, you'll get to 10 Which will be optimum.

BIGDADDYBOOTYBREAKER · Jan 18, 2026

DLD said:
Then, stick with the 7-8hg. There's never a rush.Do what you can do at the time that you can do it. And eventually, you'll get to 10 Which will be optimum.

Yeap my tolerance is not there yet to go for longer periods of time at 10hg. I can do it in spots.

Today was a breakthrough though I started in the 2” cylinder didn’t go in the 1.75” at all. Packed the 2” a little more than the usual even though I took a break here and there and the pressures werent that high. Seems that persistence on trying to fit this bigger size has paid off a little bit, hopefully! Hopefully it wasn’t just a good day in the pump. Because the base expanded really good to were did not have to worry about my balls getting sucked in and I could pump to whatever pressure I wanted. I do believe in order to accomplish this my base must've gotten a tad little bit bigger, but Ive also gotten into the habit of pressing the cylinder into my body until I feel it grip the base to avoid unwanted skin slipping in.

Now I just need to work on this until I make the 1.75” feel small and look back and wonder how I ever fit in it.

Big Schwanz Acht · Jan 19, 2026

getting the base of the cylinder 'seated' against your pelvis prior to pumping is critical...also going in with the highest EQ possible helps.

K, so this is not for the squimish, but before I ever had my MityVac I used the BM X40 modded w/the VacuVin and was N-E-V-E-R able to prevent 'ball-suckage' so I stopped trying to fight it and allowed them to 'jump-in-the-pool' too. This took a bit of getting used to and would not have been possible w/out the 'mod' since I could very slowly increase pressure, but after a while it almost started feeling kinda good. Fast-forward 10 years and I still pump in the shower this way...but keep in mind the BM tube has much more room

BIGDADDYBOOTYBREAKER · Jan 19, 2026

Big Schwanz Acht said:
getting the base of the cylinder 'seated' against your pelvis prior to pumping is critical...also going in with the highest EQ possible helps.

K, so this is not for the squimish, but before I ever had my MityVac I used the BM X40 modded w/the VacuVin and was N-E-V-E-R able to prevent 'ball-suckage' so I stopped trying to fight it and allowed them to 'jump-in-the-pool' too. This took a bit of getting used to and would not have been possible w/out the 'mod' since I could very slowly increase pressure, but after a while it almost started feeling kinda good. Fast-forward 10 years and I still pump in the shower this way...but keep in mind the BM tube has much more room

That is wild bro, I am definitely part of the squimish population. I am trying to void pumping my balls at all costs lol. But yeah pressing my cylinder hard against my body at the start has been a game changer.

I pumped today for 80 mins in sets of 20 mins. Basically did the whole thing in the 2” cylinder, maybe packed it to a 60% but feels better. Feels like progress, I think the 2” packing for girth is within sights. I might need to work on it a few hours one day and pack it. Once its done once I can probably replicate a bit faster the next.

1 HOUR LATER

Yeah this definitely was a different type of session I feel my inner wang stretched out, worn out… tired boss…

BIGDADDYBOOTYBREAKER · Jan 20, 2026

I decided to work through the tubes today pack the 1.75” and move on to the 2”. I must say my penis was not responding to pumping as it usually does, it took me slightly longer to pack the 1.75” none the less it was still packed under 40 mins. It might be because of my hardcore session last night, idk.

1.75” packed 40 mins
2” packing attempt 40 mins at roughly 65% completion.

Its getting bigger for sure though. I was exactly or just under 6” at in tube length. Currently I am under 6.5” somewhere between 6.2-6.3”.

Big Schwanz Acht · Jan 21, 2026

I'd call that ttemendous progress! Going into the tube with the highest EQ and maintaining it definitely helps. How's your edema?

BIGDADDYBOOTYBREAKER · Jan 21, 2026

Big Schwanz Acht said:
I'd call that ttemendous progress! Going into the tube with the highest EQ and maintaining it definitely helps. How's your edema?

My dick looks like a monster when it comes out of the tube. But then it is back to normal in a few hours.

I pumped twice today. During lunch time packed the 1.75” cylinder in 40 mins at 7-10hg then during the evening packed the same cylinder in an hour at 3-5hg.

I think I am going in to reel it in a little bit, and dedicate 40-60 mins a day at the most to not get overwhelmed. And use only the 1.75” for now until I completely grow into it and pack it quick at 5hg.

FOLLOWING MORNING

Last night as I mentioned I did not push it as I usually do, and work on the 2” cylinder but stayed in the 1.75” instead. Barely got any fluid retention from it, just a little bit fresh out the pump but cleared out quick. Maybe its just close enough to my natural size.

DLD · Jan 22, 2026

BIGDADDYBOOTYBREAKER said:
Same as always… I was actually able to start on the 2” cylinder this time. But idk starting out on the smaller 1.75” cylinder just feels better. So I went back down after 10 mins or so. I pumped for about 1h30m basically packed the 1.75” and went up to the 2” for a little bit 15-20 mins then back down just to finish off. I was nowhere near packing the 2” cylinder anyways.

Not super comfortable with high pressures either. 10 hg is pretty uncomfortable can hold it for 10-15 mins at most, 7-8hg I endure it for longer periods of time but with discomfort. And I can cruise at 5hg but after some time
in the cylinder it stalls and you stop expanding.

Then, stick with the 7-8hg. There's never a rush.Do what you can do at the time that you can do it. And eventually, you'll get to 10 Which will be optimum.

Big Schwanz Acht said:
I'd call that ttemendous progress! Going into the tube with the highest EQ and maintaining it definitely helps. How's your edema?

So true! That's the way you should enter the pump every single time

BIGDADDYBOOTYBREAKER · Friday at 8:55 AM

Yeah I try not to play with myself too much before getting in the pump, I am avoiding fap/adult entertainment. So I go in chub increase pressure slowly and get hard in the tube via milking the tube etc.

I pumped yesterday again 1.75” for and hour. first 10 mins 5-7 hg then spiked it to 10hg and held it there for 30 mins. At that point it was fully packed, stayed in the tube for another 20 mins at 5hg to overpack it. Got out the tube, healthy thick cock not crazy bloated or anything. Wether or not this is good not sure, not sure if it means I am taking it too easy or if its just right. We’ll see.

BIGDADDYBOOTYBREAKER · Saturday at 12:20 AM

Pumped today for 1:30-2:00 hours in 20 min intervals at 5hg pressure. Mainly in the 1.75” cylinder though at the end I got in the 2” for a brief moment.

Healthy uniform pump.

BIGDADDYBOOTYBREAKER · Sunday at 12:31 AM

Again pumped for about 2 hours in 20 min sets. Pressures 7-8 on avg. But I had 5hg and 10-11hg at some points.

Spent most of the time on the 1.75” but attempted to pack the 2”. Still ways away butttt, my balls getting sucked in is not longer an issue so thats a good sign. My base packs and other areas of thenpenis press up against the tube. But still nowhere near packing the 2”, however in those attempts when I scaled back down to the 1.75” it was super packed. Pulled it out and it was perfectly symmetrical and heavy like a sausage.

BIGDADDYBOOTYBREAKER · Monday at 11:01 PM

YESTERDAY

Pumped as always, used the 1.75” cylinder for 40 mins 5-7hg.

TODAY

Had a great session, made a
conscious effort to keep the EQ as good as possible while in the cylinder. The pressures were between 5-10hg, progressively got more confortable with 10 hg. Getting closer to the 6.5” mark on the tube. Total time in the 1.75” cylinder today was 40-50 mins. Got in the 2” for a little bit, maybe 15 mins, practice… And called it a day.

BIGDADDYBOOTYBREAKER · Tuesday at 10:08 PM

1.75” cylinder for 1 hour in 20 min sets at 5-10hg

2” cylinder for 20 mins at 4-5hg

1.75” at 5hg for 10 mins

Nearly pumped dick off today, when I got in the 2” cylinder after pumping in the 1.75” for an hour it held a pressure just by shoving my dick in it. Needless to say, the balls getting sucked in is a thing of the past now.

oldandlively · 2026-01-28T18:07:59-0700

Good post EQ with the new normal in the 2in cylinder?

BIGDADDYBOOTYBREAKER · 2026-01-29T08:36:03-0700

oldandlively said:
Good post EQ with the new normal in the 2in cylinder?

I havent experienced any EQ issues actually, if anything Ive been getting more solid erections since I started pumping. Granted I generally stay at low pressures 4-7 hg with little sprints at 10hg so that may be part of
it, however I do get a little bit of fluid retention that lasts 3-4 hours when I work in the 2” cylinder and push my penis to expand to that bigger size even when I am at 3-5hg. Not sure if this can be avoided, in any case I can live with it for a few hours. I am slowly making this transition from the 1.75” to the 2”, then again it hasn’t even been a month so.

Pumped last night the usual, 1.75” 40 mins, hopped on the 2” for maybe 10 mins. Coming out the 1.75” I can really see the use for this tool before sex. Its the perfect size cylinder right now for me to use before sex because I get that extra thickness without being puffy, come out rock solid healthy erection. Gotta try it some time.

oldandlively · 2026-01-29T09:46:45-0700

BIGDADDYBOOTYBREAKER said:
Pumped last night the usual, 1.75” 40 mins, hopped on the 2” for maybe 10 mins. Coming out the 1.75” I can really see the use for this tool before sex. Its the perfect size cylinder right now for me to use before sex because I get that extra thickness without being puffy, come out rock solid healthy erection. Gotta try it some time.

Yep. Got a few cylinders myself: 1.5in, 1.75in, 2in, and even the 2.5in. Not sure where my 2.25in is at. I use 1.5in at -5inHg for compression purposes to prevent blood vessels from over expansion at the start, with 1.75in to fluctuate between -5 and -7inHg for just a few minutes to get the blood vessels into expansion without causing the micro valves to over compensate, and go very low in the 2in at -4.5inHg to finish things to exercise the extra volume of blood flow. That is, if I can finish before my wife grabs me to do the horizontal.

Most brothers don't think about EQ maintenance when pumping. No need for multiple cylinders, but one slightly larger size up will do the trick, roughly 0.25in larger than the erected size. Pumping helps with EQ improvement overall, but it has to be strategic pumping. Not just pure zealous pumping, thinking only about expansion size.

Progress thread Harnessing the power of The Booty Breaker

0

Double Long Daddy, The Guru

0

Double Long Daddy, The Guru

0

0

@Big Schwanz Acht

Age in PE is just a number

0

@Big Schwanz Acht

Double Long Daddy, The Guru

0

0

Double Long Daddy, The Guru

0

@Big Schwanz Acht

0

0

@Big Schwanz Acht

0

Double Long Daddy, The Guru

0

0

0

0

0

Age in PE is just a number

0

Age in PE is just a number