Jake's Progress Thread (SiliStretcher, Pumping, and Red Light)

[DLD]

So surgery has been scheduled for the back injury. Coming up next week, I will be gone for a few weeks post-op as well and will likely be away from training for a while. Keep it real fella's, I wish everyone the best on their training objectives and that everyone hits their goals. See you when I return.

I pray you have a safe and successful surgery! Also, while your laying in bed, if you need friends we are here

 

[JakeM82]

At least it'll be over soon. Hope you set a record for fastest recovery time. And don't worry, your routine will still be here when you get back to get you where you're going.

Thanks for the kind words bro.

- - - Updated - - -

I pray you have a safe and successful surgery! Also, while your laying in bed, if you need friends we are here

I am sure I will be on, I won't have much else to do =/... Thanks for the prayers, ready to get this over with and get the pain behind me.

 

[DLD]

Thanks for the kind words bro.

- - - Updated - - -



I am sure I will be on, I won't have much else to do =/... Thanks for the prayers, ready to get this over with and get the pain behind me.

Always in my prayers, always!

 

[JakeM82]

Well, I am returning from surgery and after what I guess equates to about 6 weeks off of my normal routine, I have definitely taken some losses. There were some gains I just hadn't had time to cement yet, so I will have to fight to get those back again. I took a measurement today and it looks like I am down from 5.75" MEG to 5.5" and NBPEL 9.2" to 8.75". Simply put, back injuries and surgery suck. I am starting my basic pumping routine again as of today, I will have to work back up to pressure and get expansion happening again as I had very little expansion today.

I am honestly not even that concerned with the losses in length. Going from 9.2 to 8.75 doesn't even bother me, but the girth gains were hard fought for, much harder than length for me and I am not happy to see such a loss. My goal remains 6.5" MEG, so I am going to be focusing strictly on girth now, even if I lose more length I don't care, I just want to hit my girth goal.

I will be pumping with my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words], jelqing, and doing bundles. What else are you guys doing that have really brought on girth gains. I have thought about adding [words=http://www.mattersofsize.com/forum/penis-enlargement-forum/12539-slow-squash-jelq-nothing-give-me-better-expansion.html]SSJ[/words]'s but for some reason these just cause crazy fluid retention for me. My current routine is as follows:

1 hour [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] bundles (medium intensity)
10 minute manual bundles (high intensity, I may need a [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]lengthmaster[/words] for this in the future)
3x5 [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words] with 100 Jelqs after each 5 min set.

For those of you who have been killing it with girth gains, what else have you been doing that you feel is getting you really good expansion? I am determined to get to 6.5" MEG and I am trying to setup my routine to get me there. Some of you are on two-a-day routines as well, how's that working for you? Are you able to maintain EQ?

 

[huge-girth]

Well, I am returning from surgery and after what I guess equates to about 6 weeks off of my normal routine, I have definitely taken some losses. There were some gains I just hadn't had time to cement yet, so I will have to fight to get those back again. I took a measurement today and it looks like I am down from 5.75" MEG to 5.5" and NBPEL 9.2" to 8.75". Simply put, back injuries and surgery suck. I am starting my basic pumping routine again as of today, I will have to work back up to pressure and get expansion happening again as I had very little expansion today.

I am honestly not even that concerned with the losses in length. Going from 9.2 to 8.75 doesn't even bother me, but the girth gains were hard fought for, much harder than length for me and I am not happy to see such a loss. My goal remains 6.5" MEG, so I am going to be focusing strictly on girth now, even if I lose more length I don't care, I just want to hit my girth goal.

I will be pumping with my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words], jelqing, and doing bundles. What else are you guys doing that have really brought on girth gains. I have thought about adding [words=http://www.mattersofsize.com/forum/penis-enlargement-forum/12539-slow-squash-jelq-nothing-give-me-better-expansion.html]SSJ[/words]'s but for some reason these just cause crazy fluid retention for me. My current routine is as follows:

1 hour [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] bundles (medium intensity)
10 minute manual bundles (high intensity, I may need a [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]lengthmaster[/words] for this in the future)
3x5 [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words] with 100 Jelqs after each 5 min set.

For those of you who have been killing it with girth gains, what else have you been doing that you feel is getting you really good expansion? I am determined to get to 6.5" MEG and I am trying to setup my routine to get me there. Some of you are on two-a-day routines as well, how's that working for you? Are you able to maintain EQ?

Doing even a 1 hour bundled stretching with your [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] will bring back those lost length gains within a month. It's nothing to worry about.

 

[JakeM82]

Doing even a 1 hour bundled stretching with your [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] will bring back those lost length gains within a month. It's nothing to worry about.

Yeah, it's the girth gains that really bothered me. Those are hard fought gains for me, months of work to get, hopefully they come back quick.

 

[DLD]

Well, I am returning from surgery and after what I guess equates to about 6 weeks off

Praise the Lord you made through this healthy and strong Jake! Anything lost will be reclaimed with a week of training when you return. Wow, I am so happy the surgery went well!

 

[JakeM82]

Praise the Lord you made through this healthy and strong Jake! Anything lost will be reclaimed with a week of training when you return. Wow, I am so happy the surgery went well!

Thanks bro, it was successful and I am on my feet again without pain. It's still a 6 month road to recovery before I am back to physical activity that is normal for me but I am at least relatively pain free.

 

[Mlathem]

I have back problems as well jake so glad you have gotten pain free. Back injuries are no joke.

Thanks bro, it was successful and I am on my feet again without pain. It's still a 6 month road to recovery before I am back to physical activity that is normal for me but I am at least relatively pain free.

 

[JakeM82]

I have back problems as well jake so glad you have gotten pain free. Back injuries are no joke.

No kidding, I had no idea what it could be like. This is a first for me. I have a completely different level of sympathy for those who have chronic back issues, it really is terrible.

 

[templnite]

Yeah I stained my back muscles a few days ago from not warming up properly before going to work out in the cold. It took me about two days to get better, but at first I was freaking out over the unusual pain

 

[JakeM82]

Yeah I stained my back muscles a few days ago from not warming up properly before going to work out in the cold. It took me about two days to get better, but at first I was freaking out over the unusual pain

Give it time to heal bro, don't be stupid like me, when those muscles are injured, that's when the spine itself becomes vulnerable and is exactly how I herniated a disc. I was dumb and only waited about 3 days to get back to the gym. I should have waited 7 or more and been stretching it everyday.

 

[templnite]

Oh no what I meant is the pain is mostly all gone in two days, but I haven't been training. It kind of traumatized me the way it felt, and I first thought I snapped my shit up, but It only started to hurt two hours after the fact so I knew it wasn't more than muscle strain

 

[DLD]

Oh no what I meant is the pain is mostly all gone in two days, but I haven't been training. It kind of traumatized me the way it felt, and I first thought I snapped my shit up, but It only started to hurt two hours after the fact so I knew it wasn't more than muscle strain

A muscle strain should still have some time to heal, maybe 1-2 days or until the strain does not hurt any longer. How do you think this happened?

 

[templnite]

Working out too hard in the cold without proper warm-up. Where I live its usually warm so I forgot to do more warm-up sets which are what I do instead of stretching

 

[BornInFigi]

If anyone is interested here is how I make the adapter to use the skinny little tapered WineVac stoppers.

Very simply go down to a hardware store, (Home Depot, Lowes, etc.) and get about 6 inches of 3/4" clear semi rigid tubing. You will not need that much but now you have it if you make a mistake.
Put about and inch of water in a microwave safe measuring cup (Pyrex) and nuke it until it just boils. Put the end of the tubing into the hot water and wait about 30 seconds.
Now the fun part, the heated tubing will be very soft and pliable so take care here. Take your [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words] without comfort ring and stand vertical on the counter with room to work. You are going to start at
about a 15 degree angle and push the tubing down and over the air release valve on top of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words]. It needs to go down until it rests about 1/16" above the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words] plastic housing. That is so you can push down and release the vacuum slowly.
If you get it down and in place on the first try, AWESOME. If not let it cool then pop it off and reheat and try again. Once you get it down and into place let it sit for a few hours to cool and allow the tubing to form to it's new shape.
Congrats, the hard part is done. Now to fit your "wine cork" to the tubing. You will only need about an 1/8 inch gap between the vacuum stopper and the top of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words] release valve so trim it down and you are done.

Start off without the stopper and use the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words] exactly like you have been but when you are ready for more simply press the stopper into place, put the vacuum pump on the end and hang on for the ride.
It's going to be INTENSE the first time you try it but once you do you'll never go back to the gator only pull.
Once you are ready to stop simply grasp the tubing at the upper edge of the release valve and press down.

Now BEWARE! The extra pull is amazing but keep your sessions fairly short, say a 5 minute max, until you know how your body is going to react. I'd also suggest you try a few trial runs to make sure everything works properly before your first regular session. Incase you put the tubing too close to the housing and don't get a fairly quick release, squeeze the tubing just above the valve and roll your fingers forward. That will pull the tubing up and push the valve out the bottom to create more clearance or to take the tubing off altogether.

We all know this but "Use at your own risk"....

This is how I fashioned mine, jake. If you want, you don't have to attach the adapter to the valve piece. What I do is put the wine vac stopper in the adapter, then put the female end of the wine stopper in the vacuum all ready to go. Then I pump my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] to max pressure manually and let it equalibriate. Then, I just hold the adapter against the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] valve enough to form a light seal and pull the plunger up on the wine vac. You have to make sure you don't depress you [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] valve otherwise you will lose pressure an mad you pump will need to be reattached. Also, you must make sure not to trip the lock valve on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] as the same thing will happend. This can be achieved by using a slightly longer headspace between the wine stopper and the and of your adapter and a very light touch. You only need to set the adapter on top of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] valve to form a seal where you made your flange through the heating process. It took me about 3 weeks of fucking with the adapter in attachment mode and I just about had it, but saw someone else using similar techniques to pull more pressure. I hope this helps. If you need more assistance or you just can't get the hang of it, let me know and I can email dld some photos or maybe a short video. I don't really want to, since you guys will make fun of my accent. So, here's hoping you are ingenuitive to figure it out and not pull your penis off. I almost did.

 

[DLD]

This is how I fashioned mine, jake. If you want, you don't have to attach the adapter to the valve piece. What I do is put the wine vac stopper in the adapter, then put the female end of the wine stopper in the vacuum all ready to go. Then I pump my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] to max pressure manually and let it equalibriate. Then, I just hold the adapter against the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] valve enough to form a light seal and pull the plunger up on the wine vac. You have to make sure you don't depress you [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] valve otherwise you will lose pressure an mad you pump will need to be reattached. Also, you must make sure not to trip the lock valve on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] as the same thing will happend. This can be achieved by using a slightly longer headspace between the wine stopper and the and of your adapter and a very light touch. You only need to set the adapter on top of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] valve to form a seal where you made your flange through the heating process. It took me about 3 weeks of fucking with the adapter in attachment mode and I just about had it, but saw someone else using similar techniques to pull more pressure. I hope this helps. If you need more assistance or you just can't get the hang of it, let me know and I can email dld some photos or maybe a short video. I don't really want to, since you guys will make fun of my accent. So, here's hoping you are ingenuitive to figure it out and not pull your penis off. I almost did.

Thank you for taking the time to post this. If you like you could include some photos and we can make this a guide to how to attach the wine-vac...that is if you have the time.

 

[BornInFigi]

Thank you for taking the time to post this. If you like you could include some photos and we can make this a guide to how to attach the wine-vac...that is if you have the time.

I'll get around to it. I'll post it in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] thread and then email you the photos to up load. It's a pain in the ass.

- - - Updated - - -

Thank you for taking the time to post this. If you like you could include some photos and we can make this a guide to how to attach the wine-vac...that is if you have the time.

What's your email again?

 

[DLD]

I'll get around to it. I'll post it in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] thread and then email you the photos to up load. It's a pain in the ass.

- - - Updated - - -


What's your email again?

You are the man!

guru.dld@gmail.com

 

[runningignus]

Any good news Jake?