Ideas for future Bathmate releases

R

REDZULU2003

Well-known member
List ideas you may have for future releases of new Bathmates or updates to existing ones. I started this because I would like to really see an updated flexible rubber rim piece that goes at the bottom of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]. Picture attached of my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] with the rubber piece to illsutrate this point.

I do various stretches in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] and this rubber piece helps allot :cool: as the cuts in the rubber help me bend from left to right, than up and down .. even all around in a clockwork fashion. However its not made for that purpose and as a result it can limit my imagination :s especially when I want to bend the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] right towards my belly which I've found hits the inner penis like no other (Feels like the DLD Expressive Stretch).

I'm limited to how far I can go with the rubber, but holding with one hand right at the bottom so its not lifting up and than doing the bend on the tube with the other helps allot I would like to see a future model with a special flexible rubber piece that allows the user to really move the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] fully to a horizontal position in any direction.

This would be AWESOME and create mighty powerful erect vacuumed stretches like NO OTHER device on the market today! that is FACT!!! So a future version would allow the user to truly maneuver the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] in directions never thought possible, it makes it more advanced for the more experienced user.

Does this make sense?

Another addition for a future model or separate item altogether would be to enable the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] to handle weights via an attachment at the end of the tube. I know that vacuum hangers are around and have been touted as poor quality and causing blisters, but we know [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] offer much better quality and could do this right. Vacuum allows for a much even distribution of the weight through the penis and also a better fit, no fucking about with wraps and stuff like that ... this would also be HYDRO, so again a new concept HydroPumped Hanger.
 
I would have like a colorless [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] wih more transparency better, but now since I got my expensive [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] I am not going to spend 140€ on a different color.
 
stretcharmstrng;375551 said:
a constriction ring to enter the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] clamped( and fully erect)
Click to expand...

You can ATM just purchase a cock ring, use shoe lace tied in a loop or slip knot, even do what I do and use a condom rim.
 
Red,

I don't see the picture you mentioned, did you mean to attach one? That's a great idea, you can bend the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] a little while attached, but it would be great to be able to bend it more to get a much better stretch. As for the hanger, that sounds like a great idea too, but wouldn't the pull of the hanger just significantly increase the pressure inside the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]? It seems like that would be the case, and it would be the same effect as just having a much higher vacuum rather than creating a pulling force.

Dford
 
I have an idea that I'm working on that would accomplish several things in theory: increase comfort significantly, eleminate the rings and discomfort from the rubber part, add some constriction, prevent the balls from wanting to get sucked up, and allow the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] to have better length gaining potential. I think it would also allow for more flexibility to bend the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] like you talked about, Red. I'll keep you posted, if this works like I plan, it could be huge:). I should have a rough prototype of this soon.

Dford
 
Something else might be in the wings with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] and [words=http://www.mattersofsize.com/join-now.html]Matters of Size[/words]:)
 
Yes, would be great if it was completely redesigned to make it more flexible to bend in any direction and at extreme angles. It can be done, just need a different material or something.
 
Regarding the idea on the vacuum hydro hanger, yeah the pressure would increase GREATLY inside the tube once the weight drops and this was a problem reported with a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]hydropump[/words] that was on mynewsize forums, with many users getting blisters. I think that this could be remedied with good engineering and a very solid (Strong build) silicone 'cushion' inside the top end of the tube, or a small attachment that comes with the hanger that the penis fits into either fully or just the glans. T

his would be filled with silicone padding, which would keep the penis very secure and supported but also I think would absorb the pressure from the hanging. The fit would need to be close, so guys would need to mention flaccid girth and length, so the thing could be made to them or standard sizes going up in 1/4 inches etc. Might be wrong on it needing to be snug, the silicone I would imagine around the penis in a special caseing and securing this around the base like those [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extenders[/words] do, would work well.

The blisters only appeared at the end of the penis and the part near the glans, so the covering wouldn't need to go down towards the base.
 
Red,

I'm not exactly sure what you are picturing, but I can see where you're going with the idea. I've been experimenting along the same lines, I created a piece that made my length reach farther than ever, greatly increased comfort, and eleminated the rings around the base. It also keeps the balls from getting sucked up. With this piece, I felt like I could literally keep the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] on all day long. I'm going to log in some more time using it before posting anything definite about it, but I can envision [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] selling this add on in the future, that's how promising it has been so far!

Dford
 
The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] as a [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words] would look pretty scary in the pants:)
 
Is that the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Ultramax[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] Hydro [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]penis pump[/words] in your pants or are you just happy to see me:)
 
Seriously though I would like to see what Agust says about this thread, he is the one that can put ideas to [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Ultramax[/words] and he should listen to his customers which I think he will.
 
I know this may sound gimmicky but I thought, why not include a timer with the carry bag instead of the erection quality tester? I do 20 min sessions based off of my cell phone alarm and that gets old. Plus I run the risk of dropping it in the water or getting it soapy etc. Just a thought...
 
well my idea make the rubber piece detachable and have a piece that can attach to where the rubber piece was that competely seals it off, wala! a waterbottle..wait a minute they already have a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] waterbottle

sneak_peek_jennifer_anistons_smart_water_ad2.jpg
 
I think a double chamber [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] would rock
 
Pretty good thread, sorry it slipped my eye for a while guys, but most ideas, apart from the water bottle are good and valid :)

- Clear [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]. (There currently is a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] model in Crystal Clear, but it is possible with more expensive polymers (like those used in chemical test tubes) to make it even MORE clearer)
- Weights for the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] (Very possible)
- A water proof timer

What is coming in the next few weeks:

- New SuperFlow valve for all models including a one touch one finger pin to block any water from escaping the unit.
- New sticker, that will include Inches as well as Centimeters.

Agust
 
Maybe [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] could come up with a testicle cuff, band, or sleeve that can be used to keep the testicles from getting sucked into the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]. The timer idea does seem like a good idea though because I thought I was the only person using there cellphone for a timer in the shower.
 
Bathmate;376146 said:
- New sticker, that will include Inches as well as Centimeters.
Click to expand...

Nice idea on the cm and in measurements! I don't mind using the conversion from mm to in or cm to in but that change could be pretty sweet to help psychologically "validate" some of your measurements within the chamber! I think in terms of inches as I'm sure others think in cm and mm!
 
Bathmate;376146 said:
Pretty good thread, sorry it slipped my eye for a while guys, but most ideas, apart from the water bottle are good and valid :)

- Clear [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]. (There currently is a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] model in Crystal Clear, but it is possible with more expensive polymers (like those used in chemical test tubes) to make it even MORE clearer)
- Weights for the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] (Very possible)
- A water proof timer

What is coming in the next few weeks:

- New SuperFlow valve for all models including a one touch one finger pin to block any water from escaping the unit.
- New sticker, that will include Inches as well as Centimeters.

Agust
Click to expand...

If I order a crystal clear [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] in the future there should be some rebate for customers who already bought the normal model. In that case I would buy a clear on and the valve.

I'm not a fried of the scale, because I think that might irritate.
 
Bathmate;376146 said:
Pretty good thread, sorry it slipped my eye for a while guys, but most ideas, apart from the water bottle are good and valid :)

- Clear [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]. (There currently is a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] model in Crystal Clear, but it is possible with more expensive polymers (like those used in chemical test tubes) to make it even MORE clearer)
- Weights for the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] (Very possible)
- A water proof timer

What is coming in the next few weeks:

- New SuperFlow valve for all models including a one touch one finger pin to block any water from escaping the unit.
- New sticker, that will include Inches as well as Centimeters.

Agust
Click to expand...

Nice. Do you think the weights for a future [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] version will be done?
 
REDZULU2003;376341 said:
O yea I use my phone at the side of the bath to keep an eye on the time and have music playing as well
Click to expand...

Sounds like a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] party:)
 
hey guys, is there any way to increase vacuum for the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]? maybe a future idea would be a longer, stronger rubber base(gaiter?) that would allow greater vacuum/expansion due to its longer size and increased strength? i feel like i could expand a little more than the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] allows. cheers!
 
I could really use a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] testicle pump, or at least
a regular [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] that is able to pump the testicles as well.
Not sure how many others who care about this, but I would be
a great product in my mind at least.
 
Bathmatefan;379776 said:
I could really use a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] testicle pump, or at least
a regular [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] that is able to pump the testicles as well.
Not sure how many others who care about this, but I would be
a great product in my mind at least.
Click to expand...

Keep the ideas coming because [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] is listening to all your feedback.
 
I'd definitely buy one if it came to the market. And I know a lot of other guys also
are interested in matching the testicle size to the penis size.
 
REDZULU2003;380281 said:
What a cheeky bastard hahaha student discount, you fuckers get discounts for transport and everything else as it is.
Click to expand...


How about a senior discount...German Stallion:)
 
Damn guys I was just kidding around! Trying to make the point that the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] seems to pretty much have it all.

I used to think it should have a pressure gauge before reading that it is designed to only achieve proper pressure.
 
I made an accessory that I use with my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words], I've been using it for a couple months now and it's fantastic. It makes the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] 100% comfortable, eleminates the rings you get from the base pinching, and eleminates the possibility of the testicles being sucked in. I swear it makes it more effective for length too. The first time I tried it, I reached a new length record in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words], and I 've been using it every session since. But I'm hesitant to post it because I made it couple years ago for another un-related purpose and I have dreams of getting it patented for that purpose. Maybe it can be patented for both purposes? I want everyone to have access to it, but I still have hopes for a patent for it's original purpose. The prototype I made for the original purpose works perfect for it's intended use, and coincidentally, for the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] as well. I also discovered that it works great for another Penis Enlargement use with a minor modification! It's killing me to sit on it like this when there are at least three things, two Penis Enlargement related, that this things does. Any advice guys?

Dford
 
Hey Dford.I have always been wondering about this product that you have been using to make your [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] more successful,comfortable and especially improving the length gains...which I need desperately by the way.I would not even know where to start as far as patents,as I know nothing about them,or about marketing and stuff like that,so just from you and me..you would have no worries with me running with your idea.Plus that is just wrong and deceitful,and I would never do that to you.But ultimately it's your decision to go with,whether to release the information or patent,market and sell it for a price...which I would pay for(as long as it's not too much money..haha),and hopefully soon.I'm just looking for something that would definitely enhance the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words](which you say it does)and provide all those wonderful benefits.So doesn't really matter to me,as long as you make it available somehow(for free,or if you want to make money from it),as I would love to have access to it and use it to help my sessions as well with everything it can provide.I hope this helps you with my somewhat of an opinion on what to do.You do what is right for you,and I as well as I think most anybody here would respect and understand your ultimate decisions to make.
 
Hey PB, thanks for the input. I guess what I would ultimately like to see happen is I get a patent for the original purpose so that I can safely release it for that purpose, then everyone could have access to it and apply it to Penis Enlargement. It's not that I don't want to share it to help everyone with Penis Enlargement, I would gladly do so for that purpose for free since members here and DLD have given so much to me and everyone whether or not they profit from it. I just want to protect it for it's original purpose. Ideally, if I were able to get it patented and released, it would be available almost anywhere and it would be cheap! I've been sitting on this for a while, I just don't know how to go about getting it patented, I've researched it but all that I find are gimmicky programs and things like you see on info-mercials! Does anyone have any real life experience with getting things patented? My grandfather on my mother's side invented several things, a couple of which are household items now, but he gave them away and I know my life would be a lot different if he patented and sold them instead. I'll keep pursuing this to see what I have to do get this out there, any advice on how to do so would be invaluable! DLD, are any of your items patented (LengthMaster, [words=http://www.mattersofsize.com/join-now.html]Power Assist[/words], etc.)?

Dford
 
hey red were do u put the cuts in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] to make it more flexible ? also i think a thermal insert would work wonders just to keep the water inside nice and warm :)
 
dickfordays;382541 said:
I made an accessory that I use with my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words], I've been using it for a couple months now and it's fantastic. It makes the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] 100% comfortable, eleminates the rings you get from the base pinching, and eleminates the possibility of the testicles being sucked in. I swear it makes it more effective for length too. The first time I tried it, I reached a new length record in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words], and I 've been using it every session since. But I'm hesitant to post it because I made it couple years ago for another un-related purpose and I have dreams of getting it patented for that purpose. Maybe it can be patented for both purposes? I want everyone to have access to it, but I still have hopes for a patent for it's original purpose. The prototype I made for the original purpose works perfect for it's intended use, and coincidentally, for the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] as well. I also discovered that it works great for another Penis Enlargement use with a minor modification! It's killing me to sit on it like this when there are at least three things, two Penis Enlargement related, that this things does. Any advice guys?

Dford
Click to expand...

Sounds interesting. Send me a PM to look at, I may be able to help.
 
Would be awesome if [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] bring out a testicle & scrotum [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]hydropump[/words].
 
Ok DLD, I'll send you a pic and description of how I use it with [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] as well as the other Penis Enlargement use. How do I send a pic without having to upload it to an image hosting site? I don't want to put the pic out in cyberspace.

Dford
 
I always worry if any of my family member find out my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]. I am sure maybe some of you guys feel the same way that i do. I was looking at my [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words] fancy box. It gives me an idea.. why not [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] release a box with lock too? This will help a lot and not letting anyone know what's inside the box... might not be helpful but i am just speaking my mind :)
 
dickfordays;382705 said:
Ok DLD, I'll send you a pic and description of how I use it with [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] as well as the other Penis Enlargement use. How do I send a pic without having to upload it to an image hosting site? I don't want to put the pic out in cyberspace.

Dford
Click to expand...

Just attach it to an email. My email address is [email protected]
 
What about [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] having a slight grip surface on the underside of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] tube for a better grip during [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] stretches.
 
Yes the issue with a vac hanger is the blistering. The main cause is the sharp increase in vac caused by pulling on the hanger. The vac goes from being evenly distributed to being focused mostly on the glans. I've seen it when I used that thing from mynewspies. Also had the same problem with home made vac stretchers I've experimented with. Taping the glans helps, but it's annoying to have to tape the glans.
 
dickfordays;382705 said:
Ok DLD, I'll send you a pic and description of how I use it with [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] as well as the other Penis Enlargement use. How do I send a pic without having to upload it to an image hosting site? I don't want to put the pic out in cyberspace.

Dford
Click to expand...

I'm guessing you're talking about a sleeve. Such could be made with a simple mold made from PVC pipe. Ala the "make your own sleeves" thread on thundersplace. Just a larger diameter and probably 1/8" or so thick would work. I say if it's just a sleeve share your idea.
 
Last edited:
You must log in or register to reply here.
Back
Top