Ideas for future Bathmate releases

first;411262 said:
I posted this on another forum as well but it is a suggestion that fits well here. The main problem with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] is that it isn't made for the average erect angle and hence on most cases the upper side of your penis head will be pressed hard against the cylinder, causing pain and sometimes injury.

The average erect angle is 106.8 degrees yet the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] goes out at around 80-90 degrees from your body. It's simply not made for most penises. The below picture illustrates the issue.

1647d1294229110-any-one-hear-Bathmate-angle.jpg


So the suggestion is simply that the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] should go out from your body at the same angle as the average erect penis.
Click to expand...

I noticed that the cylinders on pumptoys.com have this option, but it's $25 extra. With the mass production aspect on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] I assume it's an issue of keeping the cost down or limiting the number of models released.
 
It looks like the idea of a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] to focus on head gains probably won't ever be practical for mass production. I did more reading about cylinders used for enlarging the head and they have to be custom made to your exact measurements. I assume Bathmates aren't made by hand one at a time, so it doesn't look like those will ever see the light of day. Further, this type of pump would have to used after you are otherwise finished with Penis Enlargement, otherwise you would outgrow it and have to buy another one. Sadly, that is looking like an idea that sounded better on paper than it does when trying to actually make it. Unless you just want the top half of your cock to be huge. That they could probably do lol.

When poking around pumptoys.com in greater detail I found that they've been having delay after delay after delay on their ball cylinder for over 2 years with no release date in site. Make a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] with a 4 inch diameter, call it the Devastator and they'll be beating down your door to buy it.
 
I want [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] to do a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] package with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]cleaning kit[/words] instead of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]shower strap[/words]. I already have the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]shower strap[/words] i got with my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words], i don't want 2 shower straps really, nor do i wanna buy a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]cleaning kit[/words] on top of the second [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]shower strap[/words].

And the middle bit of the sticker to be transparent as it's hard to know where you are between 190 and 200mm as of the sticker and the red box on that part.
 
Last edited:
Medicating;412157 said:
I want [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] to do a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] package with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]cleaning kit[/words] instead of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]shower strap[/words]. I already have the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]shower strap[/words] i got with my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words], i don't want 2 shower straps really, nor do i wanna buy a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]cleaning kit[/words] on top of the second [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]shower strap[/words].

And the middle bit of the sticker to be transparent as it's hard to know where you are between 190 and 200mm as of the sticker and the red box on that part.
Click to expand...

Both are great ideas. I don't think making the package like that would even change the price, both the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]cleaning kit[/words] and strap look to be about the same cost.
 
Medicating;412196 said:
Exactly. Changing the package doesn't really take much either. It's not like they need to change their product or anything.
Click to expand...

True. Well I know we have some good influence with [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] and I am sure they will take our ideas seriously.
 
hey guys, i wanted to make a seperate thread for this, but i hope it gets attention here. it seems like alot of guys(including myself) who are going from using the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] model to the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] are having sealing/suction issues with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. as it seems the model may just be TOO BIG to create a good seal around the base of the penis, i've been thinking about ways to modify either the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] itself or adding some kind of seal around the base to get proper pressure/suction.

a couple ideas i had were( in order of effectiveness):
1. wearing some type of rubber doughnut around the pelvis, one that is about the same size as the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] base diameter, though it would probably have to be a little bigger to increase sealing. this could be rubber or some other material if it works better(cloth? silicon? i dunno), and it could be a thin sheet with a hole in it that slips on over the penis and covers the pelvic area, and hopefully this will help create a better seal than without.

2. a modified [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] model with a smaller bottom part( the rubber accordian part) than normal. so the base diameter is smaller but the actual chamber is the same size. not sure if this would work or not. i don't see why it wouldn't though, if it enables a tighter seal and allows for more vacuum.

these are just a couple ideas i been thinking about, as i have been out of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] game for a while and really want to get back into it and get some good girth going on. if anyone has anything to add to this please feel free, i feel we can figure something out if we put all our heads together, and if anyone has any ideas, i'm more than happy to walk down to the hardware store and do some experimenting. thanks for reading all. cheers!
-stretch
 
Hey guys!
I was thinking about actual Inserts for the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]! I have awesome gains by inserting believe it or not a pill bottle Inside my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]! Sounds wierd but my head hits EXACTLY as DLD's Super [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] Girth workout! kinda pushed down a lilttle and HELLO FATNESS! no need to lose time or suction! um what do you guys think of a LENGTH insert? Use a piece of like pipe insulation, you would lose the ability to expand outward BUT.. i think you could PUSH the penis further forward through pressure.?? Not scientist but I did hit up Agust about this stuff but he was talking about gettting some patent release paper or something... Any way try it ! the bottom of the pill bott;e i used is curved takes the head and forced into the cylinder wall! let mke know how ya'll make out! Really not spam try it! you may have to find just the right length bottle. I had to modify mine a touch.
 
racerboy4;414952 said:
Hey guys!
I was thinking about actual Inserts for the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]! I have awesome gains by inserting believe it or not a pill bottle Inside my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]! Sounds wierd but my head hits EXACTLY as DLD's Super [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] Girth workout! kinda pushed down a lilttle and HELLO FATNESS! no need to lose time or suction! um what do you guys think of a LENGTH insert? Use a piece of like pipe insulation, you would lose the ability to expand outward BUT.. i think you could PUSH the penis further forward through pressure.?? Not scientist but I did hit up Agust about this stuff but he was talking about gettting some patent release paper or something... Any way try it ! the bottom of the pill bott;e i used is curved takes the head and forced into the cylinder wall! let mke know how ya'll make out! Really not spam try it! you may have to find just the right length bottle. I had to modify mine a touch.
Click to expand...

wow, this sounds like a GREAT idea racerboy! i have a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] so what type of bottle do you think i should try? what kind do you use? how long are your sets do you fill the bottle up with water also so it doesn't try to float on you? i'm gonna try this this sounds really cool. thanks dood! cheers
 
BRILLIANT!

This could be the solution for guys who are too big for [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] and too small for [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]! GREAT WORK!
 
prescription bottles oh yeah take the capp off and fill it with water and re install guys keeps the bottle from moving around! um Stretch....im not as endowed as you so....coke can!!! lmfao! my prozac bottle worked great! lol any way this is an awesome accessorey item that I pitched to agust like 2-3 mo ago. He sounded real excited. I know the the girth insert really works!! i have used it on regular air cylinders with awesome results! Um if dld is cool i could post some pics?? let me know... its flippin crazzy! I am actually feeling the cervical opening now!!! Bad ass [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] rules...now if i can only get those last 2inches of length!!!! maybe i'll tie my shit to car bumper!!! lol but seriously about the pics.. Maybe DLD and I could go in buisness together and make these for our fellow brethern???
 
I could go ahead and think up some prototypes??? fully adjustable for the length challenged? stainless hardware for rust resistance, And will provide the neccesary weight to prohibit movement? One end have raised stalke to let water bypass, the other be rounded around 50 degress. thinking a spring inside to provide resistance as well. Idk but I definately would like to market these things....DLD? lol
 
post pics!! so you fill the bottle up and just stick it in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]? i'm thinkin the length of whatever bottle. etc. should squash your dick about an INCH shorter than what you normally expand to to allow proper downward pressure? in other words, if you expand to 200 in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words], make sure the bottle goes down to 180 to allow enough downward pressure? do you guys get what im saying?
 
Pretty much stretch...but if you go too much you get serious donut action! LOL I usually shoot for 15mmt off,say I hit the 190 mark usually 175 is perfect! But my idea is like a collapsible sleeve with different size springs inside it you change the Length of the spring depending on your size. So you could be the Guy that is hitting the 160 line or the Guy that hits the 200 line. This will be custom fit, but the unit will come with 3 or 4 different size springs. My thought on the water amount always full. I have tried the half full thing but keep getting an air bubble so I have to lift mine high and get it out. I have Felt more pressure with a full [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] as Well, but to each his own! Dld please shoot me your phone number to my mailbox,and We can discuss our plans on this when you have time.
 
racerboy4;415377 said:
Pretty much stretch...but if you go too much you get serious donut action! LOL I usually shoot for 15mmt off,say I hit the 190 mark usually 175 is perfect! But my idea is like a collapsible sleeve with different size springs inside it you change the Length of the spring depending on your size. So you could be the Guy that is hitting the 160 line or the Guy that hits the 200 line. This will be custom fit, but the unit will come with 3 or 4 different size springs. My thought on the water amount always full. I have tried the half full thing but keep getting an air bubble so I have to lift mine high and get it out. I have Felt more pressure with a full [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] as Well, but to each his own! Dld please shoot me your phone number to my mailbox,and We can discuss our plans on this when you have time.
Click to expand...

cool man! so 15mm less than your normal length expansion. what do you mean 'if you go too much you get serious donut action'? you mean fluid build-up? cheers
 
hey another idea came to mind why don't we take red's idea for expanding the girth width and apply it to the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words], like having another material besides tile or it could be tile who knows; anyways you place the slabs above and below your dick and insert it into the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words], so when you pump it instead of expanding all around you'll only be expanding within the confines of the slabs. I also wanted to add that the slabs would have to be sanded down on the edges so they can slide in smoothly so they don't scratch/tear the insides up hopefully this sounds like a good idea to all of you. b-ez peoples peace
 
going all out;416129 said:
hey another idea came to mind why don't we take red's idea for expanding the girth width and apply it to the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words], like having another material besides tile or it could be tile who knows; anyways you place the slabs above and below your dick and insert it into the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words], so when you pump it instead of expanding all around you'll only be expanding within the confines of the slabs. I also wanted to add that the slabs would have to be sanded down on the edges so they can slide in smoothly so they don't scratch/tear the insides up hopefully this sounds like a good idea to all of you. b-ez peoples peace
Click to expand...

They are all great ideas, I hope [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] is reviewing them.
 
Ronin_OZ;416254 said:
what about some sort of device/insert to help with a bend in the penis, to try and help straight it out.
Click to expand...

This is something that could really work! Since curvature is affected mainly through erect work I think a pump would do a great job with this.
 
racerboy4;415377 said:
Pretty much stretch...but if you go too much you get serious donut action! LOL I usually shoot for 15mmt off,say I hit the 190 mark usually 175 is perfect! But my idea is like a collapsible sleeve with different size springs inside it you change the Length of the spring depending on your size. So you could be the Guy that is hitting the 160 line or the Guy that hits the 200 line. This will be custom fit, but the unit will come with 3 or 4 different size springs. My thought on the water amount always full. I have tried the half full thing but keep getting an air bubble so I have to lift mine high and get it out. I have Felt more pressure with a full [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] as Well, but to each his own! Dld please shoot me your phone number to my mailbox,and We can discuss our plans on this when you have time.
Click to expand...

hey so i finally got around to getting a good-fitting bottle for the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. i did what you said and made sure the length was about 15mm difference from my max length mark, this worked GREAT! i got awesome expansion, way more than without it.

thanks again for the great idea racerboy. i'll be using this from now on. cheers.
 
Great ideas and I am hoping [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] incorporates our input, we have been the official guinea pigs of progress:)
 
My idea is that the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] should be turned upside down and the black rubber that pumps should be at the top, thus preventing scratches and cuts!

At the bottom there should be a little of soft rubber to prevent pain, and that's it!

This way you push the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] where it counts, there is no fear of getting bruised and you can see the whole penis in the tube!

Just like you see it in the air pumps!
 
Alex78;417542 said:
My idea is that the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] should be turned upside down and the black rubber that pumps should be at the top, thus preventing scratches and cuts!

At the bottom there should be a little of soft rubber to prevent pain, and that's it!

This way you push the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] where it counts, there is no fear of getting bruised and you can see the whole penis in the tube!

Just like you see it in the air pumps!
Click to expand...

this sounds like a great idea alex. do you have any links or pics of existing pumps like this? also, where would the release valve be located? on the side maybe? i'm all for it tho! i would buy one for sure! cheers
 
stretcharmstrng;417609 said:
this sounds like a great idea alex. do you have any links or pics of existing pumps like this? also, where would the release valve be located? on the side maybe? i'm all for it tho! i would buy one for sure! cheers
Click to expand...

Well we are not the mechanics of [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] product so only thing is that they understand that the black rubber is causing problems when girth is surpassed!

If there was just the plastic, the girth would stop to expand, and the penis would have to grow vertically!
Plus this way you could have more sizes of orifice and a buyer would lets say have 3-4 sizes of orifice!
but the upper mechanics would be the same so you could just adjust more sizes of plastic!
There is also better view of your penis while pumping, you see the whole thing!

They only need to know that this black rubber is a problem and needs to be dealt with!
They will see that so many guys are getting their skin clamped and hurt in it!
Pictures like mine should be posted more so they see the problem is not solitary but common through!
http://s1227.photobucket.com/albums/ee424/lovelikeme78/?action=view&current=DSC00105b.jpg
http://s1227.photobucket.com/albums/ee424/lovelikeme78/?action=view&current=DSC00104b.jpg
lovelikeme78


lovelikeme78
 
I used my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] to unclog my sink the other day:)
 
That's some funny shit Dld! BTW went to Lowe's and bought some rubber pipe insulation guys gotta trim a bit but might be just the ticket for more leeennnggtthh!!
 
And when you are done, you simply pull out throw a Velcro strap around it and [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ads[/words]? Gotta make sure I.d. is small enough to hold you, not slip inside. Um plus think of all the looks from the women! Lmfao! Just for giggles,Dld any thought about a co-operative effort on some [words=http://www.mattersofsize.com/join-now.html]MOS[/words] SPonsored [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] t-shirts or hats! Boys I'm proud of my work,and the success of my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]! Give it up to [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Ultramax[/words]! I'd do a Goddamn car vinyls kit! LOL if I wouldn't get sued! How about it Agust? U.S. national sales Rep?
 
racerboy4;417695 said:
That's some funny shit Dld! BTW went to Lowe's and bought some rubber pipe insulation guys gotta trim a bit but might be just the ticket for more leeennnggtthh!!
Click to expand...

It did not work:) I needed a real plunger:) It is clear now, thank God!
 
Wow this thread has really taken off <div style="position: absolute; top: -250px; left: -250px;"><a href="http://www.nkll.com/hpot.php?name=51099">sports-psychopath</a></div>
 
The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] totally ROCKS! I think they have really discovered something. Here are my thoughts.

My erect girth is 5 1/4 in. which is well within the range suggested for the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. However, I am getting uncomfortable rings at the base of my manhood. Believe me, I have not permanently gained that much (I wish!). Some guys probably expand more than others, “grower” versus “shower” genetics. The tube fits fine, the goiter does not. I think they need to consider making the goiter wider.

The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] width is too big for me, and the length is way too big. I would prefer a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] with a wider goiter, or even a slightly wider version. The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] just feels right, I am very comfortable with the size of it (for now).

For measuring, I would prefer etched colored lines every 1/4 inch, in different repeating colors (e.g., black, red, blue, green) so that you could easily tell where you are at. Only the numbers for the whole numbers would be etched, the fractions would be represented by the colored lines. There could be a metric model as well.

6 __________________
___________________
___________________
___________________
5 __________________
___________________
___________________
___________________
4 __________________
 
REDZULU2003 said:
WOW .. you can now see in the current product range how our feedback helped
Click to expand...

You can see the same evolution in this Sizegenetics. Many of the attachments that they offer are ones that we came up with here. Same thing goes with the Bathmate they made changes based on our feedback. That’s very very cool! That’s when you know the brotherhood has pull! ;)
 
REDZULU2003 said:
List ideas you may have for future releases of new Bathmates or updates to existing ones. I started this because I would like to really see an updated flexible rubber rim piece that goes at the bottom of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]. Picture attached of my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] with the rubber piece to illsutrate this point.

I do various stretches in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] and this rubber piece helps allot 🆒 as the cuts in the rubber help me bend from left to right, than up and down .. even all around in a clockwork fashion. However its not made for that purpose and as a result it can limit my imagination :s especially when I want to bend the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] right towards my belly which I've found hits the inner penis like no other (Feels like the DLD Expressive Stretch).

I'm limited to how far I can go with the rubber, but holding with one hand right at the bottom so its not lifting up and than doing the bend on the tube with the other helps allot I would like to see a future model with a special flexible rubber piece that allows the user to really move the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] fully to a horizontal position in any direction.

This would be AWESOME and create mighty powerful erect vacuumed stretches like NO OTHER device on the market today! that is FACT!!! So a future version would allow the user to truly maneuver the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] in directions never thought possible, it makes it more advanced for the more experienced user.

Does this make sense?

Another addition for a future model or separate item altogether would be to enable the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] to handle weights via an attachment at the end of the tube. I know that vacuum hangers are around and have been touted as poor quality and causing blisters, but we know [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] offer much better quality and could do this right. Vacuum allows for a much even distribution of the weight through the penis and also a better fit, no fucking about with wraps and stuff like that ... this would also be HYDRO, so again a new concept HydroPumped Hanger.
Click to expand...
Do you give yourself anytime for rest after the bathmate sessions before you begin clamping?
 
You must log in or register to reply here.
Back
Top