Alienware83 Progress Thread

alienware83;660684 said:
I kinda ran into a problem today. The velcro on my velcro strap that came with the kit ended up wearing out. All the little loops on the side of the velcro that I use on the strap ended up pulling out basically because of the tension. Im not wearing it at that high of a tension either, only 900-1200. I need higher quality material. Im unable to strap it back on right now because the hooks on the velcro have nothing to really hold onto :/ Im wondering if I can get some at a hardware store.
Click to expand...

You can get more hard core velcro from a craft store, a fabric and sewing store or maybe even Walmart. Buy a roll and cut a piece off when you need it.
 
doublelongdaddy;660698 said:
You can get more hard core velcro from a craft store, a fabric and sewing store or maybe even Walmart. Buy a roll and cut a piece off when you need it.
Click to expand...

Yeah I just got mine from the hardware store bro, that stuff lasted me 2 months before needing to be replaced and it was cheap as heck too.
 
JakeM82;660893 said:
Yeah I just got mine from the hardware store bro, that stuff lasted me 2 months before needing to be replaced and it was cheap as heck too.
Click to expand...

Compared to what we are charged online it makes so much sense just to buy it in bulk. For what you would pay for a strip online you could get a roll off line.
 
Lately i havent been able to get as many hours in as im so tired in the evening i fall asleep early. I still get 3 hour sessions in the morning though. Im pushing to be able to get hours in the evening on as well. Despite that I can still see more gains being made. Im getting pretty close to half an inch in stretched flaccid length since i started. 8.75 inches bone pressed stretched flaccid length along the top and over 9 inches if I measured from the side. I haven't checked my erect length but I think it may finally be starting to show signs of gains. So far my penis growth has felt like its in spurts in some ways. Occasinally the tissue will just seem to loosen up a lot after a session and I can stretch even farther than I did a week before.

- - - Updated - - -

Lately i havent been able to get as many hours in as im so tired in the evening i fall asleep early. I still get 3 hour sessions in the morning though. Im pushing to be able to get hours in the evening on as well. Despite that I can still see more gains being made. Im getting pretty close to half an inch in stretched flaccid length since i started. 8.75 inches bone pressed stretched flaccid length along the top and over 9 inches if I measured from the side. I haven't checked my erect length but I think it may finally be starting to show signs of gains. So far my penis growth has felt like its in spurts in some ways. Occasinally the tissue will just seem to loosen up a lot after a session and I can stretch even farther than I did a week before. I put in new rods about a month ago and im definitely used to this length now, its not hard to put on anymore, its easy to slip on where as before there was a lot of tension when pulling the top piece over.
 
alienware83;661372 said:
Lately i havent been able to get as many hours in as im so tired in the evening i fall asleep early. I still get 3 hour sessions in the morning though. Im pushing to be able to get hours in the evening on as well. Despite that I can still see more gains being made. Im getting pretty close to half an inch in stretched flaccid length since i started. 8.75 inches bone pressed stretched flaccid length along the top and over 9 inches if I measured from the side. I haven't checked my erect length but I think it may finally be starting to show signs of gains. So far my penis growth has felt like its in spurts in some ways. Occasinally the tissue will just seem to loosen up a lot after a session and I can stretch even farther than I did a week before. I put in new rods about a month ago and im definitely used to this length now, its not hard to put on anymore, its easy to slip on where as before there was a lot of tension when pulling the top piece over.
Click to expand...

Good update. Have you read the newest addition to [words=http://www.mattersofsize.com/forum/showthread.php?64036-My-Best-Work-Ever-Penis-Enlargement-will-Be-Changed-Forever-gt-gt-Gain%20inches%20with%20SRT-Theory-and-Routine]SRT[/words]? It gives some really good direction to how to loosen the Tunica and allow for greater expansion and elongation. You will find it at the end of the first [words=http://www.mattersofsize.com/forum/showthread.php?64036-My-Best-Work-Ever-Penis-Enlargement-will-Be-Changed-Forever-gt-gt-Gain%20inches%20with%20SRT-Theory-and-Routine]SRT[/words] post. You will really get a good understanding of how to increase gains even more through fundamental's we never really realized before.
 
Yeah he did. You can see its longer but has more of an upward bend than before. As long as your getting some time under tension, your doing something brother. Keep trying.
 
20 dollars for enough velcro to last a few months. each strap i make should last two weeks since its double sided.
 
alienware83;662101 said:
20 dollars for enough velcro to last a few months. each strap i make should last two weeks since its double sided.
Click to expand...

Wow, what a great deal. I hope others who have this issue see this post. $20 for a whole roll compared to one strip for about the same price. Great find Brother!
 
VELCRO brand 5 ft. x 3/4 in. Sticky Back Tape-90086 - The Home Depot

heres what it was. it was actually cheaper, dno why i thought it was 20, just my bad memory. so ye basically it comes with the loop and hook side rolled separately, each has a sticky backside to it that you peel off. What I did was cut the strips accordingly to the same lenght for the hooks and loops, peeled off the sticky tape side, then put the sticky sides against each other so one side is hooks and one is loops. then from there it was still too thick for a strap, so I cut it in half longways. that means its 3/8ths of an inch long according to the product description. from my experience this works well. the straps I make are about 7.5 inches long.

basically each strap has 2 straps it can be cut into once made, and that last a total fo 2 weeks, 1 strap for each week. the velcro really wears out quite quickly. its a combination of tension + hours. 900 grams would probably last you longer but i switch it between sitting up and down, and when I wear it down its about 900-1000, and when I wear it up, its about 1000-1200. wearing it up is a really great stretch IMO.
 
Bad news again. The left arm on my [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] snapped at the base :/ I need a new one. I kinda hope they can just send me a replacement.
 
More good and bad news. On sunday I was able to get a free order for a new replcaement on my [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]sg[/words]'s left arm. Bad news, it came today and although it works, the spring inside the arm is not the same as the other. Its on a really really low tension. I will try ot see if theres a way that I can replace the spring, since I still have the broken left arm with the spring in it.
 
First I have heard of that happening. You should be able to get the other spring out.
 
I got the spring out of the broken arm of my [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] and now im trying to put it in the new arm but getting the top part of the new arm is seemingly impossible. Its like they glued this thing on. I have a pair of pliars along with the head piece for unscrewing the rods and im getting nowhere. This is really irritatig that it needs to be this complicated.

edit: okay i finally got it off. that was insanely hard to do. im not a weak guy either and that relaly took a lot of force between the pliars and the head piece of the rods. i put the correct springs in and now it works. time to get back on track. lets just hope that another arm doesn't break.
 
Last edited:
alienware83;662874 said:
I got the spring out of the broken arm of my [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] and now im trying to put it in the new arm but getting the top part of the new arm is seemingly impossible. Its like they glued this thing on. I have a pair of pliars along with the head piece for unscrewing the rods and im getting nowhere. This is really irritatig that it needs to be this complicated.

edit: okay i finally got it off. that was insanely hard to do. im not a weak guy either and that relaly took a lot of force between the pliars and the head piece of the rods. i put the correct springs in and now it works. time to get back on track. lets just hope that another arm doesn't break.
Click to expand...

It is a good thing that the quality is so high that it makes it difficult to break or come apart. I am happy you got it working though.
 
Way to get things done man, that's the kind of determination it takes to make serious gains in PE.
 
One thing I noticed just today is that my penis is having a harder time fitting into the base of the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words]. The reason I think this is, as I said before, is that the growth is happening beneath the base of the penis, so more and more of my base if having to fit through the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] for a stretch. Its not too big a problem now but sometime down the road maybe I can get one of the base mods that is actually larger for the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words].

Heres a FLS pic, im almost 9 inches bone pressed o my flaccid length stretch.
 
Last edited:
Wow, looking long as heck. Can you post this measurement with a user to inspire others because you look so good.
 
You must log in or register to reply here.
Back
Top