So...... I bought some FlaccidJackits *Ducks*
- Thread starter smokey622
- Start date
-
- Tags
- 8 inches ads average base girth cock ring condom flaccid gain gains genetics girth girth gains glans grower hands hanging jelqs larger length gains load p.e penis phallosan pump pump sleeve question results review routine short shower size sleeve sleeves stretch stretched stretcher stretching stretchy support tension thick wide workout wrap
IVEADREAM;579390 said:
Autoxleeve: The inner circumference is approximately one inch and the length is almost five inches.
IVEADREAM;579415 said:
This product,
www.tlctugger.com/prodPacker.htm
I use the p0 packer which is the first one from the left.
All you have to do is place the packer inside the sleeve on top of the glans and the sleeve will never fall off because it can't go over the cone shape of the packer and it keeps the glans protected inside the sleeve instead of out.
I can now wear a full sleeve without ever having it slip off plus my glans are smooth I would never go back.
Thanks for the reply. If I may, I have one other question. Is this a little more flexible and by that I mean when you're wearing it does it conform like a natural long flaccid dick or does it look more rigid like you've got a hard on like when using a [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]UJW[/words]?Ishyster;579491 said:
would also like a link to buy these
Thanks for the reply. I guess I'll find out for myself tomorrow. I ordered them yesterday morning(Monday) and according to the tracking number they're suppose to be here tomorrow(Wednesday) which is pretty awesome considering it's coming out of California and I'm on the east side of the US. I'll put my 2 cents worth in after I have a chance to wear them a few days under normal daily activities to see how they do.Ishyster;579556 said:
H
Here2Help
Guest
Yes the Flaccid Jackits are very durable and they are 5 inch length and about 1.25 diameter. But to tell you the truth; it is best to first cut one piece in half in order to get it on easier. Unless you have the hand strength of a bodybuilder. Lol. Thats how durable these things are. Iam just glad they give 4 pieces. Because they can be used for different things plus just in case of trial and error. So good luck.
I actually use it as an [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]all day stretcher[/words] also and have been hanging at a flaccid length of 4.5 inches daily.... Only problem is after a while it begins to cut the underside of my penis base. I'm assuming it from the movement throughout the day and rubbing that causes this. Is anyone else experiencing this?
H
Here2Help
Guest
Try to reposistion it a little further from the base.
Well I got them yesterday(Wed.)... so far the only good thing I can say is they shipped them very quickly. The packing inside the shipping envelope looked as if someone did it out of their kitchen, there were 4 tubes in inside a large zip lock bag and that was it. No paper work, no advice on how to put it on, no company info, no thanks for your order, nothing. Anyway spent 30 minutes trying to get one on and still couldn't get it on. Yeah they're durable cause I pulled and tugged and stretched that damn thing and at least it held up. I looked like I was fighting a snake. I lubed it to try and invert it and roll it on like a condom, nope that didn't work either. Finally gave up cause both my hands and dick were wore out. Now my flaccid girth ain't that big so for those with bigger flaccid girth...good luck. I'll try cutting one in half next time and see how that works.
Well I got them yesterday(Wed.)... so far the only good thing I can say is they shipped them very quickly. The packing inside the shipping envelope looked as if someone did it out of their kitchen, there were 4 tubes in inside a large zip lock bag and that was it. No paper work, no advice on how to put it on, no company info, no thanks for your order, nothing. Anyway spent 30 minutes trying to get one on and still couldn't get it on. Yeah they're durable cause I pulled and tugged and stretched that damn thing and at least it held up. I looked like I was fighting a snake. I lubed it to try and invert it and roll it on like a condom, nope that didn't work either. Finally gave up cause both my hands and dick were wore out. Now my flaccid girth ain't that big so for those with bigger flaccid girth...good luck. I'll try cutting one in half next time and see how that works.
IVEADREAM;579666 said:
You may try placing them in heated water just to see if that helps loosen them up. Overtime they may stretch easier.
Is there anyway you could take a picture?
From the sounds of things. Maybe these were purchase @ mcmaster and sold for PE purposes.
If that's the case, I would advise against anyone buying them as members from thunders had problems w/ their use.
People should probably stick w/ x/ab sleeves for now.
the jackits are difficult to work with. about the only way I could get one on was to cut it in half, fold one in half, stretch out as much as possible with both hands, put it on, then unfold once it's on. for 20 bucks, it was worth the shot....they aren't totally useless, but I think the best route is probably the xleeves...
I bought them off the Flaccid Jacket website so I'm not sure about McMasters. You'd think they would've done a little better on the shipping package but oh well for $20 what can you expect. I ordered my [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words]. this afternoon, can't wait for it to arrive. I'll keep messing with these jackets some more.smerc;579688 said:
Last edited:
Ok, here's my 2 cents worth. I have stretched, pulled, tugged pushed, cut, rolled and everything else I can think of to get these things on and on comfortably and it ain't gonna happen. My suggestion perfect your [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]UJW[/words]. I have but I thought these would be better. If you have to go thru that much aggravation and modification to make something work and it still ain't right, it's not worth it. Now again that's just my 2 cents worth but everybody's different.
D
Disco Dave
Guest
Dudes. Cut the Jackits in half and then place it where needed or wear 2 pcs in conjunction. This can help with the baseball bat effect. Now as far as packaging and instructions goes, the website shows you how to do it. Plus the Jackits always tell people to first cut one in half and see how that works. Now due to durability and your possible length; Since the whole 5 inch sleeve will not fit on all at once; then cut in half and wear the 2pc in conjunction. Plus use other sleeves for added comfort for other P.E methods. Just like any other product; sometimes it takes time to get use to perfecting the right strategy that will work for you. Now I respect the fact that they do not send instructions because some people will open your mail. This definitely makes everything 100% discreet. Plus if you need tips then maybe you should just send them a email. Btw: Depending on your length; It is best to go with the Baseball Bat Effect. You will still stay elongated without needing to cover your whole penis. Now Games Of Thrones is coming on soon and I have to go. Good Luck
Last edited:
Disco Dave;579718 said:
Maybe users who are having problems can try this and report back. If it still doesn't work, then I would call this a bunk product.
Users may try heating it as well.
Which you really SHOULDN'T have to as this and all silicone sleeves should be pliable as it has to fit 3.5"-6" FG's.
As noted before, Disco Dave may somehow have affiliations w/ flaccidjacket.
http://www.mattersofsize.com/forum/showthread.php?82700-Disingenuous-product-promotion-Disco-Dave
D
Disco Dave
Guest
As long as the product is durable and safe; Then do what you have to do. Some guys may need to try certain methods. But Iam sure if the product didnt work; Then maybe besides the 1 or 2 people who has never emailed technical support for questions are OK. So Good luck with your journey or simply email them for tips that can make it easier for you. Never listen to a non-buyer or those whom may have never contacted customer service for possible helpful tips. Now Good Luck. Games Of Thrones is Back On. Gotta Go. Good Day Mates
Last edited:
I would try soaking in hot water like smerc suggested, and then putting them on like you do an X Sleeve.
Basically, you get something cylindrical in shape that has a similar or slightly larger diameter than the sleeve, and you can put one end of the sleeve on that cylinder.. maybe 1 inch of it as a rough estimate to start. Then, from the other end, you start rolling the sleeve up towards the opposite end until you have the entire thing rolled up onto the cylindrical object. Put your dick up against the object, and then start rolling the sleeve back onto your stretched penis. Remove cylindrical object once completely unrolled. With the x sleeve, the "cylindrical object" is a weight that comes with it, but if you don't have a weight then anything you can find would work I assume. May take some practice/adjustments/the right object..
Someone try this out and see how it goes. Hopefully I made sense. If not, if you want, you can download the xsleeve video and partway through the video they show how it's done.
Basically, you get something cylindrical in shape that has a similar or slightly larger diameter than the sleeve, and you can put one end of the sleeve on that cylinder.. maybe 1 inch of it as a rough estimate to start. Then, from the other end, you start rolling the sleeve up towards the opposite end until you have the entire thing rolled up onto the cylindrical object. Put your dick up against the object, and then start rolling the sleeve back onto your stretched penis. Remove cylindrical object once completely unrolled. With the x sleeve, the "cylindrical object" is a weight that comes with it, but if you don't have a weight then anything you can find would work I assume. May take some practice/adjustments/the right object..
Someone try this out and see how it goes. Hopefully I made sense. If not, if you want, you can download the xsleeve video and partway through the video they show how it's done.
Well after 2 days of trying flaccid jacket I finally managed to get it on... just takes a bit of practice
I'm above average in girth (6.2 worse case and hit 6.5)
Like disco dave said best thing to do is cut it in half then you can stretch it over you penis pulling it apart with two hands (folded)
It certainly is stretching me but im worried that its really constricting my girth as its squashing it all in... is this safe?
Thanks
tna
I'm above average in girth (6.2 worse case and hit 6.5)
Like disco dave said best thing to do is cut it in half then you can stretch it over you penis pulling it apart with two hands (folded)
It certainly is stretching me but im worried that its really constricting my girth as its squashing it all in... is this safe?
Thanks
tna
Any links to the flaccid jackits? I recently started visiting the forums more but I must have missed this
D
Disco Dave
Guest
Tna: your girth will not go anywhere. But you may soon notice added girth towards the lower portion and the head which will be similar to a baseball bat. But your base girth will still be there. Btw: Longstretch goto www.flaccidjackit.com or google the name.
Well, I wish I had found this thread previously. I ordered a set of flaccid jacket, got it today, and immediately see problems. I'm 6.25 girth, and this is just unreal to get to work. I will try to heat them in water tomorrow, but my take is this: 5" EG and below is fine. Pushing 5.5" or more and it's a problem.
Recommend NOT getting these. I will update if I can get it to work, but this is IMO way too much work for a product to.... work.
I had also hoped to use these as condom replacements on my [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]Phallosan[/words] (using large bell & condom), but oh hell no that does not work.
FYI - the inner diameter of these is about 1".
Do the math.
EDIT: I used some hot water to temp fatigue it so I could stretch it out and actually get into it. I got it over the head and about an inch back towards the base. Released and immediately knew I had a problem. Constriction is way too much for girthier cocks. Thought I'd lose my shit just trying to get out of it.
AVOID
Recommend NOT getting these. I will update if I can get it to work, but this is IMO way too much work for a product to.... work.
I had also hoped to use these as condom replacements on my [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]Phallosan[/words] (using large bell & condom), but oh hell no that does not work.
FYI - the inner diameter of these is about 1".
Do the math.
EDIT: I used some hot water to temp fatigue it so I could stretch it out and actually get into it. I got it over the head and about an inch back towards the base. Released and immediately knew I had a problem. Constriction is way too much for girthier cocks. Thought I'd lose my shit just trying to get out of it.
AVOID
Last edited:
Thought I'd call them on their crap:
Hello,
I ordered a set of Flaccid Jackets and am unhappy with the product as advertised.
My problem is that I cannot fit the jacket over my penis with my girth (6.25 inches erect, fairly large when flaccid). Others have complained about this same issue.
I note that the website does not indicate the inner diameter of the Flaccid Jacket. As I measure one of my FJs, I note it is about 1" ID. That is simply too small for men with larger girth sizes. I also note the website uses the vague terms 'smaller' and 'bigger' diameter penises when discussing fit. Conveniently obscure.
I understand you do not have a refund policy, so I've essentially wasted money on this product. That is disappointing, but not completely unforeseen. I will sell them to some smaller penis girth soul.
My wish is that you update your marketing website to indicate that there are limitations to what the FJ can accommodate. That would be appropriate and honest marketing. As currently stands, the FJ cannot be made to stretch to fit large girth penises. Certainly not with a 1" inner diameter and such thick sleeves.
Truthfully, the company treads a thin line with creating a very poor reputation within the PE community. At best it could be considered neutral at this point due to low exposure and discussion on various PE forums; that could change either way. I encourage you to reconsider how you are going about things in your marketing.
With regrets,
&&& - a dissatisfied customer
Hello,
I ordered a set of Flaccid Jackets and am unhappy with the product as advertised.
My problem is that I cannot fit the jacket over my penis with my girth (6.25 inches erect, fairly large when flaccid). Others have complained about this same issue.
I note that the website does not indicate the inner diameter of the Flaccid Jacket. As I measure one of my FJs, I note it is about 1" ID. That is simply too small for men with larger girth sizes. I also note the website uses the vague terms 'smaller' and 'bigger' diameter penises when discussing fit. Conveniently obscure.
I understand you do not have a refund policy, so I've essentially wasted money on this product. That is disappointing, but not completely unforeseen. I will sell them to some smaller penis girth soul.
My wish is that you update your marketing website to indicate that there are limitations to what the FJ can accommodate. That would be appropriate and honest marketing. As currently stands, the FJ cannot be made to stretch to fit large girth penises. Certainly not with a 1" inner diameter and such thick sleeves.
Truthfully, the company treads a thin line with creating a very poor reputation within the PE community. At best it could be considered neutral at this point due to low exposure and discussion on various PE forums; that could change either way. I encourage you to reconsider how you are going about things in your marketing.
With regrets,
&&& - a dissatisfied customer
stillwantmore
Well-known member
Disco Dave;587067 said:
They don't have any government subsidies. Government subsidies are the main reason you can buy a burger at a place like McDonalds' for "only" $.99 True story, look it up.
I'm honestly surprised this guy/guys is still around. Fishy site, and with a little sense, it would seem a guy would realize this is way too easy of a "technique" for actual enlargement. Then, you have the "testimonial" pics. I take it the satisfied customer also featured his hands in the "how to" pics.
Last edited:
hey guys i placed a order for the sleeves on tuesday have not gotten a confirmation email or anything as of yet how long after you guys placed your order did you receive the sleeves i am in ny i tried contacting them but no one has replied back
stillwantmore
Well-known member
Stephano, you probably got scammed. I'd do a charge back.
I really wanted something to keep me from turtling. . .I received them today. I went to the gym, came home showered, massaged, and stretched my dick. I put on the flaccid jacket and I wish I could have a flaccid hang (length wise) like this all of the time.
I pumped while wearing it and I got a .5-1" gain inside the tube. . .which is crazy. Let's see if it can help me cement gains like that outside of the tube.
It's comfortable. I forgot I was wearing it until I started this thread. These things are TOUGH. I remember said something about absilicone cutting so easily. . .NOT THESE
S/N I'm going to order more Jelqing rings soon. . . .
What are your stats now brother?