Captn's Wench: PE Device

So has anyone done a follow-up or anything on this device? I made one and have been using it for about a week, but im curious of any gains that others have seen?
 
I built a Captn's Wench and it took me a little over 15 minutes to build it and get it on my cock. I hang 5 lb's for 45 minutes every other day now. Every day makes my cock skin too sore. Here is a picture of me in the wench.
 
i wish i knew where this wal-mart is that you are going to cause i tried 2 wal-marts a lowe's a home depot and 2 k-marts and i can't find cable clamps or nylon strap but, i found the grippers and the velcro except it was more like 9 bucks for the velcro at lowe's
 
I am definitley going to make one of these. Can you advise where to buy the waxman gripper rubber, and the cable clamp?

thanks
 
This thing is AMAZING!!! I have never ever been able to feel the tunica stretch without the skin stretch. I now know the difference. I used a mouse pad instead of the grippers. Works wonderfully. Just need to wrap it my penis so it's a little more comfortable. Thanks so much Captn! I've been so frustrated with manual stretching due to my low LOT. Time to start hanging OTS.
 
I intend to make one of these babies very soon. I badly need a manual stretching grip like the strap on the Wench: BAD carpal tunnel in both wrists. <:(

Just the other night I tried to make a BIB hanger, but the damn pipe was too small (biggest one at both Lowes & [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]Ace[/words] Hardware.....>:().
 
I made one, and while it certainly allows me to get a really strong grip without hurting my wrists, it does stretch and irritate my foreskin, making it swell after a really strenuous session. Getting a little rough in texture, too.
 
agent7x6;340760 said:
Did you wrap before applying the wench?
Click to expand...

Oh yeah. It's the bunching up of the skin at the head when I pull the wench that's causing it, I think. The foreskin gets quite blackish after a few good pulls, so I release the clamp and get the blood flowing again, then resume. For a day or so afterward, the foreskin will be sore when I pull it down the shaft when get a hard-on. I wait for that to go away, then resume my regimen.

Needless to say, this is a bitch. Does anyone have any skin cream they'd recommend? Bag Balm perhaps?
 
I found everything at Walmart, and was able to build it in about 20 minutes or so. I've got "0" aptitude when it comes to building/making things, so if I can do it, anybody can do it.
 
I encourage you to try to get the supplies and build one yourself. Doing so will make it easier to do the inevitable repairs; from my experience, the adhesive on the grippers begin to slip after a month or so of use at weights approaching 10 lbs and will need to be replaced.
 
yea this is another one thats looks like a project...

never tryed it but you never know

all this [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] bull-shit is garbage eveyone knows its [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]traction[/words]
the real question is how much is just enff to get your desired result


eveyone wants to have the Pefect size but you have to know that this shit is an invesment and takes time what ever ideas are out there is only cuzz eveyone is here to help each other out plus its the perfect invirment to get results

i might make sumthin similer
 
whoa I just made one and have a bunch left over.

Only thing different is I used cotton hand wraps (boxing) instead of nylon. I coudlnt' find any and everyone kept asking me what i wanted to use it for. And I didn't want to say I'm making a Penis Enlargement device. haha

I have alot of extra materials left. I can probably make like 4 more of these guys
 
Just as a question to the masses, Whats the most weight, that any of you guys that are using the wrench as a hanging device, have hung? i guess i'm trying to find that threshold between maximum weight hanging and where the device can no longer accommodate the stress, if at all. Great device. Thanks for the info in advance.
 
Well going through some of my logs I see I had one 5 minute hang of 14 pounds in between my sessions of 12 1/2 and 10 pounds. I may have done more but that's the highest I have documented. I'll keep looking...
 
Does it feel okay when hanging 10lbs or more with this device? looks such a simple yet effective tool. Surprising really more haven't made one, myself incl. If this could handle 20lbs or so than I would use it.
 
http://peweights.com/newproducts.html

First product on that page. For everyone having trouble finding this shit at wal-mart(myself included). Obviously more expensive than self-made but it comes with theraband and seems more stable as well.

Note: I am still waiting to order this. I have not had any experience with this site or products. I will be soon hopefully.
 
Cool, nothing wrong with having someone else make something and sell it if others can't get it right on their own. I personally still feel the original home made BIB hangers are better based on experiences with making/trying out the wench.
 
I've just build one of this tonigth, cool project, and very inexpensive,4' velcro $8.50,6x4 grippers $3.60, 1 med. clamp. $2.50 Nylon wrap $0 Recycled from old backpack, and as stated above can make 3 more. :)
Question: Is the device washer friendly or hand wash?
 
This device can not be more comftable, i'm using it as a stretcher for now (while typing this post) :) I did different lengths, and the one it's the best for me is the 38", while sitting i wrap under heel to generate the most intense pull so far in my 8th month carrer.
Guys got to try it!
 
I've built 2 since yesterday, a 2" wide CW, and another made from 1" velcro strip for an [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ads[/words].
The new velcro needs to be broken in more, but I am comfortably hanging 12.5lbs, w/ 1 cable clamp , comforably, w/ the 1" wide CW w/ a coban wrap. It is soo friggin comfortable!
I am certain I will be able to hang 20+ lbs from this in another few days.
 
ahhhhhh! i have searched home depot and wall mart and canadain tire! no where can i find these dreaded floor grippers... come guys, where the hell do i find them!
 
OK... assembled in 15 mins!!!!! Had a clamp.... Velcro was $8.00 at walmart! used a mouse pad instead of grippers...(used old mouse pad...free) cut a nylon strap off of a large squirt gun in the garage.. (free). cost me $8 BUCKS! just gave it a test run... 5 lbs. for 10 mins. Very Comfy! no pinching on skin... didnt see any discoloringing in the head (glands) at all. could have went another 10 mins. with no problem. GREAT JOB CAP!!!!! AWESOME!
 
REDZULU2003;386471 said:
Does it feel okay when hanging 10lbs or more with this device? looks such a simple yet effective tool. Surprising really more haven't made one, myself incl. If this could handle 20lbs or so than I would use it.
Click to expand...

hanging 11 with ease right now! i feel maybe twice that will max it! but... with alittle tweaking i think it could hold more weight!
 
woo hoo!! i made it up to 10ibs with the captn's wench.

I started hanging in november with it, started at 2.5 ibs and been on and off Penis Enlargement here and there (took 3 months off due to a trip)..

Just did my first 10 pound hang.. No complaints, no slippage. I use 2 cable clamps spread on the velcro. I wrap with What-a-grip cut to fit on my penis and wrap a 3x8 terry cloth strip cut from an old towel.
 
tekryder;454747 said:
woo hoo!! i made it up to 10ibs with the captn's wench.

I started hanging in november with it, started at 2.5 ibs and been on and off Penis Enlargement here and there (took 3 months off due to a trip)..

Just did my first 10 pound hang.. No complaints, no slippage. I use 2 cable clamps spread on the velcro. I wrap with What-a-grip cut to fit on my penis and wrap a 3x8 terry cloth strip cut from an old towel.
Click to expand...



Any gains to report?
 
I didn't take any measurements before sadly.. don't know why I didn't, its really easy. Now I am 6 erect circumference and 6.5 erect. I am sure that .5 is gains though. Don't think i remember ever hitting 6 when i used to mess around and stick a ruler up.
 
tekryder;454861 said:
I didn't take any measurements before sadly.. don't know why I didn't, its really easy. Now I am 6 erect circumference and 6.5 erect. I am sure that .5 is gains though. Don't think i remember ever hitting 6 when i used to mess around and stick a ruler up.
Click to expand...


That is tough! Well at least you know now and will be able to report future gains.
 
Thanks for all the info Captn, I made one the other day, new at this so I'm still working on the correct wrapping technique etc. I had a time finding the grippers but Menards has them.
 
You must log in or register to reply here.
Back
Top