Captn's Wench: PE Device

Originally posted by stillwantmore
LOL, so I may pick up a sort of "gangsta rapper" look...grabbing my cock and balls not so discreetly through my pants every once in a while. LOL. I figured as well, I would put the 'soft' side of the velcro on the outside to keep from chaffing my legs.
Click to expand...

rofl
 
so....are you supposed to hang weights on this device?
if so how much weight do you think it will hold?

or is this more of an all day stretch or whatever.
 
Cap,
Glad to see you posting here! I have assembled all but the grippers, have to get to the Home Despot this week. I had a thought about using your wench as an [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words]. Could you not substitute the non-stealth cable clamp for say a rubber band or wire-tie (the kind that can be undone, of course) for a bit of tension? Wouldn't need much tension for a few pounds weight, but would be stealth.

Now, did you hear about the Parrot...
 
SWM--
I don't want to cross threads but to answer a question you had about the Wench as [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words] in a different thread:
Check what I posted above. You should probably break this bitch in by hanging some good weight using the CableClamp - for a few days. Once she's broken in you will get a much much better hug on the shaft when you initially put it on. You have to give it a pretty vicious squeeze and this gets easier as it breaks in. But you've probably noticed that the Velcro cylinder is still very stiff. Break it in with a little hang time. Then try [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words].
In case you missed it, someone over at Thunder's Place - noted that he was able to get a substantial stretch without using the CableClamp. He achieved this by using an [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]Ace bandage[/words] wrap under Therawrap. I think this creates a firmer shaft for the Wench to grab. But I'm not sure. Check out that thread.

Pirate - WTF are you doing here? These good people don't need their threads hi-jacked by monkey jokes! If yer wanna share a swig o' rum with ol' Cap - ye know wherst to drop anchor, matey!
 
OK I built mine The grippers turned out to be hard for me to get, but it was worth the effort. I assembled the hanger in just a few minutes once I had all the materials, and I am not the handiest guy around. I have a BIB, and it took over a month of testing settings and wraps before I got it working. The wench required only one adjustment of the grippers, and I was comfortably hanging less than 10 minutes from when I started construction. Amazing simplicity and comfort, and it cost less than a large pizza. Sweet!
 
Originally posted by PirateSteve
OK I built mine The grippers turned out to be hard for me to get, but it was worth the effort. I assembled the hanger in just a few minutes once I had all the materials, and I am not the handiest guy around. I have a BIB, and it took over a month of testing settings and wraps before I got it working. The wench required only one adjustment of the grippers, and I was comfortably hanging less than 10 minutes from when I started construction. Amazing simplicity and comfort, and it cost less than a large pizza. Sweet!
Click to expand...

Awesome news man!! I may have to give this a try.. Along with the 4Aderm. *twitch*

-ItsElectric
 
Well, after several failed attempts at trying to get this thing to work as an [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]all day stretcher[/words] system....I have come to the conclusion it will not. At least not for me. No matter how snug the velcro is...yes, it's VERY worn in and soft...it wont grip tightly enough without a cable clamp. It's already thick enough w/out the clamp...with the clamp...it cannot be concealed under pants. Not even under my Old Navy WIDE LEGS. I tried using the grabbers, stacking two grabbers on each side, I even made some "custom" hard PVC pieces...to no avail. It either gripped too loosely or too tightly or was not concealable and therefor not practical for [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words]. It's a great hanger design for men who want another option from the home made Bib hangers...and probably easier for some guys to make though. Oh well, back to my girth work, and when I hit my girth goal, my full sized production Bib should fit me much better and then I will go back on the attack for more length.
 
Still,
I have been using my Wench as an [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words] all afternoon with great success. First, I found an old gel shoe insert that had a felt backing. I cut two pieces to fit over the grippers in the Wench. Then I attached some Velcro to the top of the grippers. The felt on the back of the gel stuck to it just fine.

I found this was comfortable enough to hang without wrapping. Then I got creative. I stuck some of the soft Velcro on the tray of my [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]Penimaster[/words]. Then to tighten the Wench without a big clamp, I cinched it up with a wire-tie (the kind that has a release, the regular kind would have to be cut off!) Next I just slapped my Wenched penis onto the Velcro tray of my [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]Penimaster[/words] and was able to stretch comfortably for 3 hours (I never made it past 1 hour on the [words=https://www.internetzahlung.de/cc-aktuell/bestellung.php3?PID=PM0440A&Sprache=en]Penimaster[/words] with it's original mounting). I could have kept going, but I had other things to try.

While Wenchimastering, I dug out an old [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words] that I never got any successful use out of. It consists of a neoprene knee brace (the kind one may purchase in any drug store) and a thick condom with an eye bolt in the end. The knee brace has a small spring sewn on the side to attach to the condom. I just put on the knee brace and hooked the spring to the Wench and I got what I believe is the best [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words] device I have ever owned (and I have bought a lions share of them). Anyone could make one by sewing a bungee to a knee brace and hooking it to the Wench.

After a few hours of playing, I took off the tie wrap and the Wench is still holding just fine. I am thinking the gel insole grips the penis a bit better than wrapping or the plain grippers in the original Wench design. Couldn't hang without the cable clamp, but [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words] at say a few pounds pressure seems OK.

Still, try the gel insoles and if they don't work alone, just add a releasing wire-tie. This is a very sweet [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words]!
 
woohoo, constructed in less than 30min and hanging under an hour.. :D only minor problem is that the wench starts to slip down the shaft almost falling off while hanging, regardless of how tight i put it, but the head stops it :)


using as an [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ads[/words] as well :D
 
Originally posted by TimBo755
woohoo, constructed in less than 30min and hanging under an hour.. :D only minor problem is that the wench starts to slip down the shaft almost falling off while hanging, regardless of how tight i put it, but the head stops it :)


using as an [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ads[/words] as well :D
Click to expand...

Timbo, are you using the cable clamp around it to snug it up? With the cable clamp on mine does not move...
 
with the hanging, yes...though i think its because of the [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace bandage[/words] wrap under it, im going to try the self adhesive tomorrow night though.

with the [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ads[/words] i don't use clamp however.
 
Timbo,
You might be right about the [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace bandage[/words]. Or perhaps your wrap is too thick. When I wrap for my BIB I have to use a pretty thick wrap, but I have found just once around with theraband does the trick with the Wench. The BIB needs wrap for support, but the wench seems to need wrap only for comfort.
 
It appears that I'm the only one who can't find those nylon straps.
I found the other items with ease. Anyway, those who have found them at Wal-Mart, let me know where their located at (isle/area..). If there is someone who has found them elsewhere, I would appreciate your input as well.
 
I posted this elsewhere and thought it may be of interest here.

Well I just finished my first hanging session with the Wench and it really works well. I have always done manual stretching before and this is much easier.
While sitting there thinking about getting a bigger dick I remembered how I always wondered how much equivalent pull to weight I was getting when stretching manually.
I have now figured it out, I'm going to Walmart to get a fish weighing scale to attach to the wench so I will know how much pressure to put when pulling on my pecker.(Try to say that fast three times.)
I won't be able to hang at home I have to do it on the sly so this will be helpful.
 
Just went and bought the stuff and made mine. It seems to work well, but I am fixing to go take a shower and try some real hanging. Thanks for sharing your device Captn.
 
Can't find the nylon straps, went to wal-mart no one there knew what I was talking about.
Thanks a lot cap for the craftsmanship, "Captn's Wench"genius.
 
You must log in or register to reply here.
Back
Top