Red, the pumps you linked to look like they are not that great of quality. I would really opt. for just buying a tube from lapumps or pumptoys or vacutech, and using your mouth as the pump until you can afford a mityvac pump.

Furthermore, with your girth of 7.5 inches or so, you are going to need at least a 2.5 inch diameter cylinder, which is much bigger than the standard cheap pump size of 2.
 
philadelph said:
Red, the pumps you linked to look like they are not that great of quality. I would really opt. for just buying a tube from lapumps or pumptoys or vacutech, and using your mouth as the pump until you can afford a mityvac pump.

Furthermore, with your girth of 7.5 inches or so, you are going to need at least a 2.5 inch diameter cylinder, which is much bigger than the standard cheap pump size of 2.


Yeah you can get good quality pumps of E-Bay too. Do a search for it there. Also it is a must you get a pump with a pressure gauge. Good luck finding on RED!
 
http://www.ctc-company.com/cart/agora.cgi?page=xl-2000.html

Definitely more $$ than what you want to spend but I'm curious if the changes in pressure from the "bobbling cylinder" would help with gains by stressing the penis to engorge. Maybe someone here has experience with both constant pressure pumps and something like the CTC pumps which have a more "sine-wave" pressure I would like to know.
 
I don't know if any of you visit Penis Enlargement Forums, but in their pumping section there are homemade pump instructions, with pressure gauge and electronic pump for low $$, and high quality. I would give this a shot before spending super cash on a Boston Pump or something. If anyone's interested I may try and get permission to repost it over here.
 
I use a Dr. Joel Kaplin pump that i purchased off ebay for 50 bucks.
Has pressure gauge, nice quick release features, etc. For me, it was worth it.

Autozone sells the mityvac pump (no tube) for 25 bucks. Then all you need is a tube.
 
for just buying a tube from lapumps or pumptoys or vacutech, and using your mouth as the pump until you can afford a mityvac pump

I might go this route than.
Dont wonna spend much cash on a pump, cos its not going to be the core of any of my routines, its just used now and again with the clamp, so nuthin almighty is needed.
 
philadelph said:
Red, the pumps you linked to look like they are not that great of quality. I would really opt. for just buying a tube from lapumps or pumptoys or vacutech, and using your mouth as the pump until you can afford a mityvac pump.

Furthermore, with your girth of 7.5 inches or so, you are going to need at least a 2.5 inch diameter cylinder, which is much bigger than the standard cheap pump size of 2.

Good advice Philadelph.

I bought a decent pump but a cheap tube. Now I've ordered a replacement tube. Apart from the dimensions, it's worth paying attention the the tube ending. Thick wall cylinders, flange cylinders or a fat gel base will all help to keep the tube from digging into the pubic area. The force of the tube into your body is greater than the pull on your penis since the cross-sectional area of the tube will always be greater than the area of your penis (unless you're instantly packing). This is something I completely neglected to consider when buying a tube, hence my 'buying twice'.

If the cylinder has a valve on the end then using your mouth instead of a pump is very easy. It's surprising how little suck it takes to get the vacuum up. The main danger is in overdoing it since you have no gauge. If you could use a gauge just once so that you recognise the 'feel' of the vacuum at different levels then it would be a whole other story, so in the meantime just remember that it takes less than you think.
 
Last edited:
any good sites in the UK that have good pumps for anything under and upto ÂŁ25-ÂŁ30.
I want something to give me a good pump with while I clamp, I aint into all the advanced pump shit cos I aint going that direction.
 
You're setting a tight budget there. The only one I know of for a pump that has a gauge is here: http://www.thickwall.co.uk/Pumpsnew.htm

As for the cylinder, are you thinking of getting an oversize cylinder to incorporate the clamp? or are you looking for one with a rubber seal that grips around the shaft (rather than against the base) so you can seal it above the clamp?

I guess it depends on if you're just using it to get erect before clamping off, or clamping while pumping.
 
fubar993 said:
I use a Dr. Joel Kaplin pump that i purchased off ebay for 50 bucks.
Has pressure gauge, nice quick release features, etc. For me, it was worth it.

Autozone sells the mityvac pump (no tube) for 25 bucks. Then all you need is a tube.

I started with a Kaplin pump but the handle broke (right at the fulcrum point) after about a month. If you want one that lasts, get a pump with metal handle.

I'm gonna have to check out Autozone...
 
sikdogg said:
I started with a Kaplin pump but the handle broke (right at the fulcrum point) after about a month. If you want one that lasts, get a pump with metal handle.

I'm gonna have to check out Autozone...
Hope these links work. I guess I was wrong about the 25 bucks.

http://www.mityvac.com/kits.html

http://www.toolsource.com/ost//prod...5743&mscssid=KP43RF5VJWF79NRTQ5CMRCX5EFPBCJU5

http://www.northerntool.com/webapp/...06970&PHOTOS=on&productId=391590&categoryId=0

Can use this for water pumping.
http://www.sears.com/sr/javasr/product.do?BV_UseBVCookie=Yes&vertical=TOOL&pid=00947058000&cs=e5
 
Well I would like to be clamped while pumping, I wont be useing a clamp while pumping....but shoelace [ole times].
I aint really arsed about gauges or anything else like that.....just want a CHEAP pump that will give me some nice pump sessions.

I will clamp than apply the pump, keeping 100/110% erect [with blood] the whole time, and let the pump effect work on that, I than hopefully will avoid some of the fluid buildup.
 
REDZULU2003 said:
Well I would like to be clamped while pumping, I wont be useing a clamp while pumping....but shoelace [ole times].
I aint really arsed about gauges or anything else like that.....just want a CHEAP pump that will give me some nice pump sessions.

I will clamp than apply the pump, keeping 100/110% erect [with blood] the whole time, and let the pump effect work on that, I than hopefully will avoid some of the fluid buildup.

How about using a women's pony tail hair tie? Ever put one on your finger or wrist just for fun? That may work pretty well with the clamp/pump routine.
I am going to try this, just have to find one.
Fubar
 
crazyed27 said:
RED-

I just bought a pump like 10 mins ago, came here and saw this thread. I'm going on a pumping and clamping routine for a while to see what kind of results! Going to experiement with some ideas too! I keep ya posted Red!


ED what kind of tube are you using? I have a mighty vac pump but need a tube. Hope you can suggest one. Thanks bro.
 
Alright, what size pump do I get? My width erect is 2.2'' with length being just over 8 inches and girth in the early 7'' range.
 
REDZULU2003 said:
Thanks, looks alright.
I have got two here I like the look and sound of, what you guys think?
Would perhaps be better for me to have a vibrater built-in to help keep stimulation.

http://www.sextoys.co.uk/modules/view.asp?Prodcode=N1959
http://www.sextoys.co.uk/modules/view.asp?Prodcode=N0502


Using Vibrators in Cylinders, is not a good idea, this type of tube is normally associated with wanta be products. In other words they are not very good in construction or safety, and are normally sold in sex shops. you should try www.Tigers.com I think that this is the address if not go to goolge and type in Tiger penis pumps.
 
Okay guys, THANKS A MILLION for the advice.
Now to DOING IT and buying.
I want a tube thats 2.50 - 2.75'' range width and able to take 8.5'' erect length, while being pumped via my mouth. Can someone perhaps find me some links to a pump with what I need? I aint very good at it ATM. Remember, I'm going with the mouth and try keeping it as cheap as possible.
 
Back
Top Bottom