I'm new to this forum although I have browsed through it quite a bit recently so bear with me lads. I got my [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] over 2 months ago and only figured out today how to use it correctly(to a certain extent). I have a question aimed particularly at DLD, although any answers would be appreciated. You seem to be the MAN when it comes to info DLD so I have a couple of questions regarding usage of the device. 1. Do I use my fully outstretched flaccid length or just flaccid length when determining the length of the device with the elongation bars? I have read contradictory statements everywhere. 2. Do I lock my penis in the device with the comfort strap while the springs are compressed to give it that initial stretch? or not?. Also(I have scoured countless pages on this and can never get a definitive answer or maybe I'm retarded) how does the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]traction[/words] work? I have read so much on it and understand it is difficult to put into words but cannot figure it out for the life of me! The hexagonal bars never seem to disappear into the device no matter what part I screw.Is there an actual tutorial with a real life example instead of a prop? Thank you so much to anyone who helps me:s
Help with the SizeGenetics device
- Thread starter SizeGenetics
- Start date
-
- Tags
- 8 inches ads doublelongdaddy educated effective elongation erect exercise exercises extender extenders extreme flaccid foreskin gain gaining gains genetics glans growth inches length gains penis penis extender phallosan progress question results routine short size size genetics size genetics penis extender sizegenetics sizegenetics answers sizegenetics opinions sizegenetics questions sizegenetics results sizegenetics support stretch stretched stretching support tension theraban wrap
I'm new to this forum although I have browsed through it quite a bit recently so bear with me lads. I got my [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] over 2 months ago and only figured out today how to use it correctly(to a certain extent). I have a question aimed particularly at DLD, although any answers would be appreciated. You seem to be the MAN when it comes to info DLD so I have a couple of questions regarding usage of the device. 1. Do I use my fully outstretched flaccid length or just flaccid length when determining the length of the device with the elongation bars? I have read contradictory statements everywhere. 2. Do I lock my penis in the device with the comfort strap while the springs are compressed to give it that initial stretch? or not?. Also(I have scoured countless pages on this and can never get a definitive answer or maybe I'm retarded) how does the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]traction[/words] work? I have read so much on it and understand it is difficult to put into words but cannot figure it out for the life of me! The hexagonal bars never seem to disappear into the device no matter what part I screw.Is there an actual tutorial with a real life example instead of a prop? Thank you so much to anyone who helps me:s
I'm new to this forum although I have browsed through it quite a bit recently so bear with me lads. I got my [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] over 2 months ago and only figured out today how to use it correctly(to a certain extent). I have a question aimed particularly at DLD, although any answers would be appreciated. You seem to be the MAN when it comes to info DLD so I have a couple of questions regarding usage of the device. 1. Do I use my fully outstretched flaccid length or just flaccid length when determining the length of the device with the elongation bars? I have read contradictory statements everywhere. 2. Do I lock my penis in the device with the comfort strap while the springs are compressed to give it that initial stretch? or not?. Also(I have scoured countless pages on this and can never get a definitive answer or maybe I'm retarded) how does the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]traction[/words] work? I have read so much on it and understand it is difficult to put into words but cannot figure it out for the life of me! The hexagonal bars never seem to disappear into the device no matter what part I screw.Is there an actual tutorial with a real life example instead of a prop? Thank you so much to anyone who helps me:s
funkymonkey99;624955 said:
You will want to stretch to the rarest point in flaccid stretch you can when trying to break down tissue and make gains. The springs should be at least slightly compressed so there is a bit of [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]traction[/words] from that point. If the fit is too lose then you should add a small bar. Over time you will want to add a longer bar, this is where [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]traction[/words] from the bars comes in. Also, remember that the screws are reverse set so you will need to turn them counterclockwise to close them and clockwise to open them. I suggest going for sets of 30-60 minutes with some light stretching in between each set (basic stretching exercises are just fine) and then get into another set. Always be sure to keep up with the intensity always reaching for more length whether it be from new bars or use of the spring tension. You may need to try different configurations of bars to get just the right fit.
Hey DLD, I've had my [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words]/started doing manual PE about 2 weeks ago and I've seen great gains. .75 in BPEL in fact! I've been attaching the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] right below the glans and although it seems to be working I was wondering if the entire shaft needed to be stretched for optimum efficiency or if I could start up about mid shaft and just use fewer bars at high tension. It sure would make it easier to wear under pants if it was a whole long bar shorter? Is that cool or is it going to slow things down a lot not stretching the whole shaft?
got2behung;627878 said:
There has been some speculation on attaching lower to create better expressive gains (gains from inside the body) but no one has been consistent enough with it yet to make any firm theories on it's effectiveness. In my opinion it is better to use the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words] just below the glans as you have been doing and then include some manual expressive stretches to cover that area. Expressive stretches can be done in a few ways, the best is using the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LengthMaster[/words] as this allows for two handed stretching from a very low point on the shaft. They can also be done with a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BathMate[/words] using the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BathMate[/words] Hardcore Stretches. Lastly, they can be done manually by simply gripping the penis at a low point and stretching in multiple direction from there. To get even more out of your length routine you should include some bundled stretches where you twist the penis and stretch it from there. These are best done with the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LengthMaster[/words] but can also be done by hand. These will go to stretching the Tunica most effectively which will leave room to grow both in length and girth. I also suggest getting in some erect stretches, maybe 5 minutes a day, to help firm up all the length gains you are making.
D
Dick Spanner
Guest
Just taken delivery of this item, but still confused to the tensioning.
So how do I know which tension setting I'm actually using, i.e. 600, 900, etc?
So how do I know which tension setting I'm actually using, i.e. 600, 900, etc?
T
templnite
Guest
There's rings marked on the rods the first is six hundred then nine and so on
I've got a question on the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]sizegenetics[/words]/X4 labs [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extenders[/words]. I currently own a [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]sizegenetics[/words], but I'm looking to increase the tension soon. The max tension may not be enough for me once I use up my newb gains. Does anybody know if the X4 labs arms are compatible with [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]sizegenetics[/words]? I was reading that the x4 does 3600g tension whole the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]sizegenetics[/words] remains around 2800g? Correct me if I'm wrong
I am absolutely beyond frustrated and confused with this thing. I really don't understand the tension and spring system as it seems it is not working for me at all based on what I've been reading. I would love some help here and would very much appreciate some guidance, let me first try and explain what my issues are.
Okay first off I can't understand what you guys mean by setting different tensions. I've tried countless times to try different combinations of rod lengths in order to get this right. First I thought that I had to use less rod length and then turn the main rods in order to see the spring compress to increase tension. That didn't work as all that happened was the rods extended further and not enough tension to cause the springs to compress. So I finally came across advice of first compressing into your pelvic bone before strapping in by having longer rods on. I figured this would work as it would clearly have more tension but the springs are still not compressing EDIT: Staying compressed, they're not staying compressed after strapping in I meant. I figured "okay, time to turn the rods." But when I do that the damned rods seem to be "stuck" inside the white holder and can't turn the rods at all when that much tension is applied. And I'm telling you I'm pretty stretched at this point. My question on this really comes down to what is my goal supposed to be with the setting here? Especially when it comes to the tension markers/lines? Am I not using enough rod length and am REALLY supposed to yank harder? Even so, it seems then I'll never be able to turn the rods and extend them anyways as they always get stuck as I said. Totally lost here... any help is much appreciated.
Okay first off I can't understand what you guys mean by setting different tensions. I've tried countless times to try different combinations of rod lengths in order to get this right. First I thought that I had to use less rod length and then turn the main rods in order to see the spring compress to increase tension. That didn't work as all that happened was the rods extended further and not enough tension to cause the springs to compress. So I finally came across advice of first compressing into your pelvic bone before strapping in by having longer rods on. I figured this would work as it would clearly have more tension but the springs are still not compressing EDIT: Staying compressed, they're not staying compressed after strapping in I meant. I figured "okay, time to turn the rods." But when I do that the damned rods seem to be "stuck" inside the white holder and can't turn the rods at all when that much tension is applied. And I'm telling you I'm pretty stretched at this point. My question on this really comes down to what is my goal supposed to be with the setting here? Especially when it comes to the tension markers/lines? Am I not using enough rod length and am REALLY supposed to yank harder? Even so, it seems then I'll never be able to turn the rods and extend them anyways as they always get stuck as I said. Totally lost here... any help is much appreciated.
pearce;692100 said:
Have you read through the tutorials and watched the videos?
SizeGenetics Video Tutorials
Video Tutorial
Help with the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words]
Do not get frustrated as every man that has ever bought a [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words] can tell you that there is a learning period and this is the time to learn the basics, learn different ways to use, different ways to wrap, many thing to learn but you will get there with patience and the help of the Brotherhood. Look through the information above and let know if you have any other questions.