Bathmate design problem...only made for guys with smaller girth!

A

Alex78

0
Ok i have owned the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] for few months now, but only started to use it in a regular fashion starting 3.2.2011, then i started a 3x times a day(15min per session), and now i switched to 20 min per session.

I have already maxed out the bottom, the problem being is that the black rubber, catches my skin and clamps it between the inner walls thus causing wrinkles and small cuts and boils.

I am posting pics so the problem is more visible!

I am still about 1,5-1,8cm shy of reaching the top but the pain of the pump is making me abandon the climb!

DSC00079b.jpg

DSC00105b.jpg

DSC00104b.jpg


I wanted to go for [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] after this but i fear similar problem will occur, i will max out the bottom, while still few inches will remain to the top.

I like the pump i really do but i think the design was considered for guys with smaller girth or maybe for the ones who cannot expend so much blood flow, either way im frustrated, since i started a log to make my progress with steadfast resolution.
Did anyone else attract similar problem?
 
The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] fits in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] so I think you won't have these problems.
 
You could also find some sort of [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ACE[/words] wrap that is water proof and wrap the base.
 
bluetard117;415792 said:
You could also find some sort of [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ACE[/words] wrap that is water proof and wrap the base.
Click to expand...
[words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ACE[/words] nows make a waterproof bandage.
 
bluetard117;415792 said:
You could also find some sort of [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ACE[/words] wrap that is water proof and wrap the base.
Click to expand...

Thanx 4 the info i just used a shirt, cut it, wrapped it round and it worked for the pain, but i could not go the usual length...
 
I get this too. I just take it as part and parcel of using the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]. There will always be some 'war wounds' associated with Penis Enlargement. To help alleviate the problem, I give my penis a good massage with some circulatory-aid oil, and use alternating hot/cold water blasts on my penis while in the shower. I find this latter technique in particular has recently reduced inflammation and swelling.
ps. nice length Alex78, you are a good 3cm above me at the moment!
 
redzulu2003;415902 said:
its obvious you need a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words].
Click to expand...

yup
 
Rude_God;415858 said:
I get this too. I just take it as part and parcel of using the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]. There will always be some 'war wounds' associated with Penis Enlargement. To help alleviate the problem, I give my penis a good massage with some circulatory-aid oil, and use alternating hot/cold water blasts on my penis while in the shower. I find this latter technique in particular has recently reduced inflammation and swelling.
ps. nice length Alex78, you are a good 3cm above me at the moment!
Click to expand...

Pain i got at first was bearable, but when your skin is clamped and you are doing your routine 3 times a day its not productive, the cuts get bigger and you eventually have to stop...
 
I have had the same problem and it definitely a struggle after each session. I eventually stopped using the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Herc[/words] for a month because of the pain. I didnt feel like i needed the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] though sense im only hitting around 194-198 expansion numbers, but i decided if i wanted to keep gaining i needed to get one. I have been around the mid 190's for a long time, and i think part of it may have to do with my skin getting caught up in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words] not allowing me to grow in in the length department. Hopefully the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] allows me to keep gaining all over and gets rid of the pain!
 
Thanks for the warning, I will now definitely avoid the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words].

What are your stats Alex78?
 
IronMike20;415920 said:
I have had the same problem and it definitely a struggle after each session. I eventually stopped using the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Herc[/words] for a month because of the pain. I didnt feel like i needed the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] though sense im only hitting around 194-198 expansion numbers, but i decided if i wanted to keep gaining i needed to get one. I have been around the mid 190's for a long time, and i think part of it may have to do with my skin getting caught up in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words] not allowing me to grow in in the length department. Hopefully the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] allows me to keep gaining all over and gets rid of the pain!
Click to expand...

See this is what im afraid with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words], that i will reach girth far before length, and just like [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words], im left with a gap, i think [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] should have two versions for every model, for slimmer and girth guys... i think they will have to accommodate us, since lots of guys will have our issues.
 
Alex78;415932 said:
See this is what im afraid with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words], that i will reach girth far before length, and just like [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words], im left with a gap, i think [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] should have two versions for every model, for slimmer and girth guys... i think they will have to accommodate us, since lots of guys will have our issues.
Click to expand...

I think the chances are that you outgrow the X-40s girth are slim. 8 inches base girth is plenty... And once you are thicker than a beer can you should probably stop, lol

What's your girth right now?
 
Alex78;415932 said:
See this is what im afraid with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words], that i will reach girth far before length, and just like [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words], im left with a gap, i think [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] should have two versions for every model, for slimmer and girth guys... i think they will have to accommodate us, since lots of guys will have our issues.
Click to expand...

With 8" at the opening you would need to be 1 and a half times the size of a coke can:) to outgrow it.
 
Alex78 you wont outgrow the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. My girth is quite substantial and I could not outgrow it. [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] is HUGE, much larger than the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. Another problem could be your skin is adjusting to this yet and you need time. I would suggest just conventional [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] work with no stretching on the tube, which is more stress to the skin and when your already suffering I see no added benefit.

The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] would be a better model for your girth I think but I suspect your skin is also adjusting and it has taken some trauma from stretching perhaps which created more tension than normally would inside the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words].

Either keep going with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] but as I suggested or contact [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] and I would try arranging them to take the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] back in exchange for the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] plus additional fee to makeup its price (X-40 minus [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] = YOUR FEE).
 
i think we are all over-looking one key piece of information Alex has mentioned- DUDE , USING THE [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] 3 TIMES A DAY IS WAAAY OVERKILL. i think ONE 30 min. session is PLENTY each day, maybe even every other day. obviously, your skin cannot keep up with that type of expansion. you need to give yourself time to heal, that's all there is to it.

you sound a little manic-obsessive about your Penis Enlargement, much like i am myself, and i know being forced to take time off due to injury is a hard pill to swallow personally, but if it begins to cause EVERY SESSION to suffer, you need to look at the bigger Penis Enlargement picture.

take some days off, maybe even a WEEK or TWO, HOWEVER long it takes to COMPLETELY heal your unit, then go back to a modified routine. YOU WILL NOT LOSE ANY GAINS. you might even GAIN from the time off(letting your tissues completely repair).
the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] says right on it the recommended usage of 20 minutes per day, not 60 MINUTES per day. take it easy. see if you can get away with 2 20 min. sessions a day without breaking your skin, and if you can't, YOU CAN'T. there are plenty of other exercises you can do while you heal- kegels, stretches, clamping, and probably some others that won't put stress on an open wound.

hope you let yourself heal and get back to it. cheers bro.
-stretch
 
I am also having similar issue with my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]. It's makes a mark which is deep but how do you guys add the pictures in the forum. Sorry I never post pic that's why.
 
Well the thing is i have been using [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] as suggested with small time amounts per day and it did not work!

Only when i started doing 4 times a day5- 10-15 min and then switching to 3 times a day 20min did i notice results!

That is why i abandoned [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] after two months, because i was doing once a day 5 minutes till i could do 30 min! That 30 min was great time gain after 2 moths of gradually slowly gaining small time increments, but the problem is it takes almost 2 days to completely heal from swelling.

And now i realize the penis makes better gains from being stimulated every 4-6 hours. Be that 5 minute or 30!

That is my experience.

I will post size pics other time must take a tape measure and photo it, i did not take pics with measurements from starting serious workout.
I did not want to become obsessed with daily gains and then quitting, so i made a pact to not measure till i get 1 month of heavy duty workout and i was stopped 11 days in.
 
REDZULU2003;415953 said:
Either keep going with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] but as I suggested or contact [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] and I would try arranging them to take the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] back in exchange for the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] plus additional fee to makeup its price (X-40 minus [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] = YOUR FEE).
Click to expand...

why would they let me return?
Its used and it shows!

Its bad business for them! They cannot sell it back!

What is the reason i can call on?
 
Give it a try is what I'm suggesting, perhaps they may pitty you for the mistake in buying a smaller model and allow you to trade for the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. Otherwise either adapt as advised or save for the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words].
 
It would be helpful if you guys who are having issues with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] would give your erect base girth measurements.

From what I have read, guys start to have these issues at around 6" base circumference. If so, I suspect the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] would not work for me.

In my opinion, the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] is just too damn big for the vast majority of guys.
 
Better once the Maximus is out, which is between a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] and [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. Word has it that summertime is the release date.
 
REDZULU2003;416033 said:
Better once the Maximus is out, which is between a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] and [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. Word has it that summertime is the release date.
Click to expand...

They said it may not be out until the years end. Not sure why they are waiting so long.
 
No need for in between models only [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Herc[/words] and [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] with different girth sizes!
 
Alex78;416068 said:
No need for in between models only [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Herc[/words] and [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] with different girth sizes!
Click to expand...

Good point but they would need to redesign their entire system to do this, no?
 
doublelongdaddy;416070 said:
Good point but they would need to redesign their entire system to do this, no?
Click to expand...

Actually they have only probably few molds that get covered with hot plastic, getting few more really is not an investment problem for a small family company, let alone a world wide distributor!

The only thing here that is missing is customer feedback, people are touchy on this subject and will not engage directly into an email correspondence just to tell them what is missing!
Maybe a survey in their main page and email sent to users would probably have some affect!

I did contact them, today and told them about my problem with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Herc[/words]...
 
Alex78;416084 said:
Actually they have only probably few molds that get covered with hot plastic, getting few more really is not an investment problem for a small family company, let alone a world wide distributor!

The only thing here that is missing is customer feedback, people are touchy on this subject and will not engage directly into an email correspondence just to tell them what is missing!
Maybe a survey in their main page and email sent to users would probably have some affect!

I did contact them, today and told them about my problem with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Herc[/words]...
Click to expand...

Actually it is quite expensive. Getting a cast mold costs about $30,000...I looked into this last year. Our feedback is helping this issue too, [words=http://www.mattersofsize.com/join-now.html]MOS[/words] is the reason they are making a new size:)
 
You need the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. I had the exact same problems until I upgraded to one.
Haven't experienced the problems since.
 
doublelongdaddy;416100 said:
Actually it is quite expensive. Getting a cast mold costs about $30,000...I looked into this last year. Our feedback is helping this issue too, [words=http://www.mattersofsize.com/join-now.html]MOS[/words] is the reason they are making a new size:)
Click to expand...

30000$ a problem, i know farmers that buy 100000$ tractors, guys that have car repair shops that need equipment that costs 80-100000$, i mean every small business has to change most of its components, 5-10 years, and they are small change compared to this guys...
But i am glad DLD they recognize the power of your site and the feedback they get. Must say looking how many posts you have, you are one heavy fingered mofo!
I salute your resolve!
 
I've made a suggestion to make the opening a bit more ergonomic in the sticky. Idk if [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] has seen it or if they are considering implementing it. Since the penis isn't circular in diameter but more like oval or heart shaped. I'll bet this would make the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] much more comfortable to wear.

It would mean a major change in the production process though...
 
Last edited:
Smartie;416234 said:
Since the penis isn't circular in diameter but more like oval or heart shaped.
Click to expand...

Good remark!
When i look in the tube i see the point, [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] certainly is revolutionary and beats most devices by far!
I think in years to come it will not be forgotten, but reinvented and improved time over...
 
It is up to each Customer Service rep if the unit can be exchanged; but it has to be done within a few days of receiving it. We have been trying to hammer out an upgrade program for [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] users and I think we are close to getting there.

Agust
 
I want to be in this program Agust!

I have maxed out my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] at the base and I hear that the Maximus has no release date so I m anxious to get a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] and start pumping again at max pressure.

Bathmate;416281 said:
It is up to each Customer Service rep if the unit can be exchanged; but it has to be done within a few days of receiving it. We have been trying to hammer out an upgrade program for [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] users and I think we are close to getting there.

Agust
Click to expand...
 
Last edited:
Yes August, there are many men here who love the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] and would love to help in any way we can.
 
Ya me too!

If they won't release the Maximus yet could we at least have a good reason why we have to wait!
There is obviously a demand for it here as I have read from other guys who have maxed out the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words].
doublelongdaddy;416289 said:
I want to see the mid model happen!
Click to expand...
 
i was hoping for a solution for i am not one to give up,,,i could just go back to the dry pump...though i did read a latex glove can be used with the fingers cut off,,Hydromaxmmm i have to give this some thought,,,anybody besides Alex with dont use it as a solution ? how about a light wrap with [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace bandage[/words] as dld uses for the glan routine,,,the post where this was suggested did that work? i guess i will try it today and figure this out ,,,i was thinking on design for [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words],,,if they could put a sleve in there some how,,i dont know,,,thanks anyway,,,dont use it,,jajaja
 
i am experiencing this same issue, even with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. i am taking a few days off to let the chafing/ broken skin heal. i was thinking maybe some foam wrap around the base? it can absorb water and compress alot without cutting off circulation. worth a try. :/ i will give it a shot tomorrow or the next day. cheers
 
stretcharmstrng;417610 said:
i am experiencing this same issue, even with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. i am taking a few days off to let the chafing/ broken skin heal. i was thinking maybe some foam wrap around the base? it can absorb water and compress alot without cutting off circulation. worth a try. :/ i will give it a shot tomorrow or the next day. cheers
Click to expand...

how big is the opening(orifice) for the penis in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]?
[words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] is around 5,8 cm.

So what you are saying that you gain girth so quick on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words], that the same issue occurs?
 
tks stretcharmstrng,,what you suggest i am going to try, i was thinkig along these lines,, i am thinking it only has to be a few inches long for that is the problem area,,i feel that it is possible that this will work,,,i shall try this evening,, i am hoping this will work,,,all the best,,,tks
 
Alex78;417611 said:
how big is the opening(orifice) for the penis in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]?
[words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] is around 5,8 cm.

So what you are saying that you gain girth so quick on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words], that the same issue occurs?
Click to expand...


what i'm saying is the skin at the base seems to always get the most expansion, due to it being in the area of strongest suction. i think your idea of having the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words] on top is great. i really hope [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] considers this design.

the most expansion i've gotten so far is 7.25" at the base. i should mention, the broken skin/ rings have been on the bottom and bottom-sides of my shaft, not so much on the top. this may be due to me putting the thing on with the bottom of the shaft close to the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words]/ tube, because if i DON'T, my balls will get sucked in. i use the bottom of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiter[/words] as a guide to make sure i have enough skin to stretch my sack down so it doesn't get sucked in.

cheers
 
kport11;417541 said:
i was hoping for a solution for i am not one to give up,,,i could just go back to the dry pump...though i did read a latex glove can be used with the fingers cut off,,Hydromaxmmm i have to give this some thought,,,anybody besides Alex with dont use it as a solution ? how about a light wrap with [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace bandage[/words] as dld uses for the glan routine,,,the post where this was suggested did that work? i guess i will try it today and figure this out ,,,i was thinking on design for [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words],,,if they could put a sleve in there some how,,i dont know,,,thanks anyway,,,dont use it,,jajaja
Click to expand...

I am sure our dedication to modifications will eventually make the public version. We just need to keep at it and find the best solutions.
 
According to [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]'s website and marketing, if you use the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] ONLY (they don't mention doing Jelqs, stretches or using stretching devices) then you can make 1 - 3 inches gains.

So I want to know, because I've bought the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] (and it does work!) but I really only have time to do like 20 min five days a week. Can I really expect to make 1 - 3 inches over 12 months of daily use?
 
dangledongdave;422074 said:
According to [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]'s website and marketing, if you use the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] ONLY (they don't mention doing Jelqs, stretches or using stretching devices) then you can make 1 - 3 inches gains.

So I want to know, because I've bought the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] (and it does work!) but I really only have time to do like 20 min five days a week. Can I really expect to make 1 - 3 inches over 12 months of daily use?
Click to expand...

You do not need to use it in the bathroom, now you can go and do 2-3 routines a day!
 
Zathora_8;422674 said:
stretcharmstrng
I get the same thing with my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] rings mainly on the BOTTOM side of my penis, but i never get the problem of my balls getting sucked in, they nearly do but never have.
and
Alex78 i got my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] and my dick look the same as your photo's, but it was that bad after the first few times of using it so I stopped and bought the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] but its still happens. [I never got the cuts though I think I stopped before that]

stretcharmstrng & Alex78
I'm gonna try some water based lube or some Vaseline this Thursday on the inside of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Gaiter[/words], [i heard this helps with the base rings] and I'm gonna order the Universal Pump Sleeve, from what I've read it fully helps with the base rings and with the BIG RED RING it leaves on your pelvic bone area. I'll update this when I get them.

you can read more about the Universal Pump Sleeves here:
{http://www.mattersofsize.com/forum/showthread.php?61218-Review-of-Universal-Pump-Sleeve-for-use-with-Bathmate&highlight=australian+Bathmate+store}
Click to expand...


The universal sleeve will solve this completely! Let us know how it goes.
 
You must log in or register to reply here.
Back
Top