I just want a solution...

AF3 · Jan 19, 2013

Yeah I looked at that website but the amount of misspelled words and general half-assedness of it gave me a little pause. I also didn't see any type of money back guarantee, but would definitely like to hear what you think of it if you decide to.

touchmyjunk · Jan 19, 2013

AF3;528115 said:
Now just to find the right wrap.

Silicone tape. Take about 3' and dust it with baby powder to reduce the tackyness. Mount the SG base. Then wrap while erect about 3/4" behind the glans rim. Wrap to approx 1-1/2" width. In the center of your wrap, set up the SG head attachment with the velcro strap (I use approx 11" of 3/4" wide velcro one-wrap) and cinch it moderately whilst still erect. Let erection subside to approx 50% and then cinch the velcro to a consistent metric you establish. I have a particular metric where I feel the right amount of core compression which is non-slip and yet still maintains circulation.

Then attach the rods. My method is to use one long piece in the head attachment, then screw the lengths together in-situ. This takes practice, and I will extend in 3 to 4 sessions of 5 minutes each until I reach my proper extension once things have normalized.

I extend in the SG at full tension for hours at a time. No discomfort. Never an issue with slippage. Only issue is having to pee and a bit of chafing at the base. I have hogged out the base a bit to alleviate that and I also now add some rotary movements at intervals to allow the skin to normalize.

When extending it's important to recognize the difference between pain which will incur damage, and pain which is a normal part of the extending process. This is because when done improper you can not only incur damage, but you may also prevent the exercise from being effective.

For example, you may have trapped skin or an acute pinch somewhere which can give the illusion of having too much tension, when the reality is that it is just skin irritation which must be solved before the proper extending force can be applied.

Hope it helps. I feel guilty about you guys having wrap troubles. I pretty much went a year of use while struggling with getting it to work for me, but now I am getting some pretty clean gains when combining it with manual stretches. So far about 1/4" a month. The SG is really a great product once you get that head piece & wrap figured out to where you can use it consistently.

Jdcsd · Jan 19, 2013

AF3;528129 said:
Yeah I looked at that website but the amount of misspelled words and general half-assedness of it gave me a little pause. I also didn't see any type of money back guarantee, but would definitely like to hear what you think of it if you decide to.

Haha. Well I bought the sleeves on there and love them. I've got my dick extended to almost my el for 7 straight hrs with no pain or loss of blood flow and a pound of weight hanging from it. And I cut 2 inches off the silicone sleeve and use it for sg

AF3 · Jan 19, 2013

toucHydromaxyjunk;528131 said:
Silicone tape. Take about 3' and dust it with baby powder to reduce the tackyness. Mount the SG base. Then wrap while erect about 3/4" behind the glans rim. Wrap to approx 1-1/2" width. In the center of your wrap, set up the SG head attachment with the velcro strap (I use approx 11" of 3/4" wide velcro one-wrap) and cinch it moderately whilst still erect. Let erection subside to approx 50% and then cinch the velcro to a consistent metric you establish. I have a particular metric where I feel the right amount of core compression which is non-slip and yet still maintains circulation.

Then attach the rods. My method is to use one long piece in the head attachment, then screw the lengths together in-situ. This takes practice, and I will extend in 3 to 4 sessions of 5 minutes each until I reach my proper extension once things have normalized.

I extend in the SG at full tension for hours at a time. No discomfort. Never an issue with slippage. Only issue is having to pee and a bit of chafing at the base. I have hogged out the base a bit to alleviate that and I also now add some rotary movements at intervals to allow the skin to normalize.

When extending it's important to recognize the difference between pain which will incur damage, and pain which is a normal part of the extending process. This is because when done improper you can not only incur damage, but you may also prevent the exercise from being effective.

For example, you may have trapped skin or an acute pinch somewhere which can give the illusion of having too much tension, when the reality is that it is just skin irritation which must be solved before the proper extending force can be applied.

Hope it helps. I feel guilty about you guys having wrap troubles. I pretty much went a year of use while struggling with getting it to work for me, but now I am getting some pretty clean gains when combining it with manual stretches. So far about 1/4" a month. The SG is really a great product once you get that head piece & wrap figured out to where you can use it consistently.

Haha man to be honest I read the whole thing but pretty much interpreted it as "yeah try silicone tape and see where that goes."

Jdcsd · Jan 19, 2013

toucHydromaxyjunk;528131 said:
Silicone tape. Take about 3' and dust it with baby powder to reduce the tackyness. Mount the SG base. Then wrap while erect about 3/4" behind the glans rim. Wrap to approx 1-1/2" width. In the center of your wrap, set up the SG head attachment with the velcro strap (I use approx 11" of 3/4" wide velcro one-wrap) and cinch it moderately whilst still erect. Let erection subside to approx 50% and then cinch the velcro to a consistent metric you establish. I have a particular metric where I feel the right amount of core compression which is non-slip and yet still maintains circulation.

Then attach the rods. My method is to use one long piece in the head attachment, then screw the lengths together in-situ. This takes practice, and I will extend in 3 to 4 sessions of 5 minutes each until I reach my proper extension once things have normalized.

I extend in the SG at full tension for hours at a time. No discomfort. Never an issue with slippage. Only issue is having to pee and a bit of chafing at the base. I have hogged out the base a bit to alleviate that and I also now add some rotary movements at intervals to allow the skin to normalize.

When extending it's important to recognize the difference between pain which will incur damage, and pain which is a normal part of the extending process. This is because when done improper you can not only incur damage, but you may also prevent the exercise from being effective.

For example, you may have trapped skin or an acute pinch somewhere which can give the illusion of having too much tension, when the reality is that it is just skin irritation which must be solved before the proper extending force can be applied.

Hope it helps. I feel guilty about you guys having wrap troubles. I pretty much went a year of use while struggling with getting it to work for me, but now I am getting some pretty clean gains when combining it with manual stretches. So far about 1/4" a month. The SG is really a great product once you get that head piece & wrap figured out to where you can use it consistently.

Why do you go in erect and why do you wrap so far from your glans?

touchmyjunk · Jan 19, 2013

Jdcsd;528167 said:
Why do you go in erect and why do you wrap so far from your glans?

Starting the wrap while erect allows the head to retain a bit of shape as I cinch down. Also it keeps the tape taught. I wrap while erect, and a light cinch on the velcro. Then I do a final tight cinch on the velcro at about 50% erection. Then I attach the rods.

The positioning of the wrap is one of experimentation. As you extend, it will scooch a bit towards the head and so with my 3/4" positioning it winds up right at the rim. Also the silicone tape will bunch up on the glans rim to soften the contact.

Deleted member 119539 · Jan 22, 2013

toucHydromaxyjunk,

Can you set us up with a pic of your set up please?

toucHydromaxyjunk;528171 said:
Starting the wrap while erect allows the head to retain a bit of shape as I cinch down. Also it keeps the tape taught. I wrap while erect, and a light cinch on the velcro. Then I do a final tight cinch on the velcro at about 50% erection. Then I attach the rods.

The positioning of the wrap is one of experimentation. As you extend, it will scooch a bit towards the head and so with my 3/4" positioning it winds up right at the rim. Also the silicone tape will bunch up on the glans rim to soften the contact.

Super · Jan 22, 2013

AF3 catch me up what is going on, let me see if I can help.

AF3 · Jan 22, 2013

Thanks Supra, I opened a new thread with a summary of every method I've tried and the results:

http://www.mattersofsize.com/forum/showthread.php?70857-When-Mods-Don-t-Work

Part of me thinks I've got to be doing something wrong in the way I put it on, but I'm really not sure at this point.

I emailed Ron and he also said I could use the canister method with the SG but would probably have to buy a whole new set of rods to attach at sufficient length. Have you used the canister method with the SG before?

DLD · Jan 22, 2013

I say squeeze all blood out of head before and during wrap, the less blood in the head the more comfortable the stretch will be and the more use you will get out of your SizeGenetics. It is also good to look the the VLC Tugger, it is a great attachment.

AF3 · Jan 22, 2013

DLD-- I bought the Tugger. I can't use it due to my complete lack of foreskin (Ron confirmed this when I emailed him). I'll try squeezing the blood out of the glans. Will your ADS coming in March be more comfortable than the SG?

AF

touchmyjunk · Jan 22, 2013

pjp2002;528598 said:
toucHydromaxyjunk,

Can you set us up with a pic of your set up please?

There. I've finally managed to put a picture of my dick on the Internet LOL.

I've been trying to cement in a new length since the weekend. This so far is one hour, full extension at my max extender stretch of just over 8 bone pressed. It's more comfortable extending while flaccid like this, but I do mix it up a bit and work different directions and various levels of erection.

But the point is that I find silicone tape and one-wrap to work as a solid head attachment wrap and I haven't had any issues at the head end. Still a lot of chafing at the base after an hour.

DLD · Jan 24, 2013

toucHydromaxyjunk;528696 said:
There. I've finally managed to put a picture of my dick on the Internet LOL.

I've been trying to cement in a new length since the weekend. This so far is one hour, full extension at my max extender stretch of just over 8 bone pressed. It's more comfortable extending while flaccid like this, but I do mix it up a bit and work different directions and various levels of erection.

But the point is that I find silicone tape and one-wrap to work as a solid head attachment wrap and I haven't had any issues at the head end. Still a lot of chafing at the base after an hour.

WTF! Is your glans really that fucking big? Really? I am so jealous, wow it is like a fucking apple! Did you train specifically for this or was it a gift from God?

Jdcsd · Jan 25, 2013

toucHydromaxyjunk;528696 said:
There. I've finally managed to put a picture of my dick on the Internet LOL.

I've been trying to cement in a new length since the weekend. This so far is one hour, full extension at my max extender stretch of just over 8 bone pressed. It's more comfortable extending while flaccid like this, but I do mix it up a bit and work different directions and various levels of erection.

But the point is that I find silicone tape and one-wrap to work as a solid head attachment wrap and I haven't had any issues at the head end. Still a lot of chafing at the base after an hour.

Looks like you are in there 99% perfect. Just that pinch of skin getting crushed that will retain fluid and look like a deformed blister in an hour. Haha just kidding looks like you know what you are doing.

DLD · Jan 26, 2013

Jdcsd;529131 said:
Haha just kidding looks like you know what you are doing.

no doubt!

touchmyjunk · Jan 26, 2013

Jdcsd;529131 said:
Looks like you are in there 99% perfect. Just that pinch of skin getting crushed that will retain fluid and look like a deformed blister in an hour. Haha just kidding looks like you know what you are doing.

LOL sometimes I put it on symmetrically and sometimes it's a little crooked. The extra skin I leave is a bit by design because it bunches up against the tape as a soft anchor. It only deforms for about 5 minutes after a two hour session. However I do not stretch right after pump (Bathmate etc) because the pump normally leaves a bit of deformation behind the head and thus it makes wrapping for the SG more difficult.

It's important to have enough width of tape (wider than velcro strap) so that with tension the bunched up tape will be between the velcro and head rim. Originally I used 1" width wrap with 3/4" velcro and this was not enough. Needs about 1-1/2" width on the wrap.

The use of higher than recommended tension I have decided on because I am a hard gainer. I think many would be served with normal spring range tension. It takes a bit of experimenting.

Do not be afraid to drip a little personal lubricant along the edge of the base ring once you are set up. For me this makes a huge difference in comfort. And when you take it off to rest you can just wash off the water based lubricant and start again.

Do try rotary while holding the head, and in combination with base ring lube and cycling the rod tension. i.e. hold the head with cock straight out and swivel in a circle. Gradually you may widen the circle to where you are rotating and touching leg, belly, leg, chair. Add slight tension on the rods and rotate some more. Add base ring lube, and rotary to some music etc. Watch a bit of erotica and experiment with rotary at different erection levels. I am having good progress with using the SG as a dynamic tool.

touchmyjunk · Jan 26, 2013

doublelongdaddy;529088 said:
WTF! Is your glans really that fucking big? Really? I am so jealous, wow it is like a fucking apple! Did you train specifically for this or was it a gift from God?

:blush: DLD you are really encouraging.

Unchained it is a typical proportioned head and a 5-1/4 to 5-1/2 (can't remember) girth shaft. There is distortion while extending because I prefer to wrap with a bit of fluid trapped in the head.

Hey, I've been using your power assist as a prep for the SG. I exclusively use the whole package type of stretches. I like those, as they have given me much more range of motion which presumably means my ligs have stretched.

Really a great time for Penis Enlargement. So many toys!

P.S. If you ever have a word with the SG manufacturer could you ask for a larger base ring model. Not just for comfort but I think there is really potential to pull in more surrounding tissue, or even a total package extension.

DLD · Jan 26, 2013

toucHydromaxyjunk;529412 said:
:blush: DLD you are really encouraging.
.

More like jealous! Ever since I interviewed all those strippers in Miami I found that what they want most is a huge head! Your head dwarf's mine! Must have a huge brain!

touchmyjunk · Jan 26, 2013

doublelongdaddy;529467 said:
More like jealous! Ever since I interviewed all those strippers in Miami I found that what they want most is a huge head! Your head dwarf's mine! Must have a huge brain!

FWIW if you want bigger head I have an exercise with compression material and theraband.

touchmyjunk · Jan 26, 2013

Sorry couldn't edit my post. Bigger head exercise with compression material and theraband constriction looks like this (attached as d4.jpg).

I haven't done more than a few weeks. I guess I will start back up with it.

I took a lot of pictures of my dick today LOL. Also attached a side view (attached as d3.jpg) of the silicone tape and one-wrap head attachment method I use for the SG.

I just want a solution...

0

0

1

0

1

0

Deleted member 119539

Guest

Well-known member

0

doublelongdaddy

0

0

Attachments

doublelongdaddy

1

doublelongdaddy

0

0

doublelongdaddy

0

0

Attachments

Similar threads