10 months Extender progress pictures

[DLD]

Now that's what I'd like to see. A metal ruler, it's the best way to measure. You simply need to round off the corners At theYou simply need to round off the corners At the base. You look huge and that's a great place to start. If you need any other help, just let us know

 

[Blueballs]

Hey DLD, the images don't load in full screen on my comp. Is that something browser related(I'm in chrome on Win) or it's from the servers?

 

[Blueballs]

Hey DLD, the images don't load in full screen on my comp. Is that something browser related(I'm in chrome on Win) or it's from the servers?

 

[Blueballs]

I kn

Not sure if the images were fully backed up for this thread before the massive purge by the hackers between 2015 and 2019. I'll do a search later in the backup archive we have.

I know for sure that I checked this thread a few years ago, like 2023- 2024, and all the images were here.

 

[DLD]

Hey DLD, the images don't load in full screen on my comp. Is that something browser related(I'm in chrome on Win) or it's from the servers?

No, we are working on this right now. To repair it, i'm sorry, but it should. Soon be up

 

[oldandlively]

I kn

I know for sure that I checked this thread a few years ago, like 2023- 2024, and all the images were here.

If the posts contain photos between 2023 and 2024, they are backed up. The server switched to space-saving mode at that moment. All photos and videos we currently have are backed up and will be restored the moment we switch over to the larger server size. We're dealing with both I.T. on three fronts and the financial demands required to have the larger server on the 4th. So, yes, plenty of things to deal with behind the scenes to keep things running properly. So, be a bit more patient on this matter to restore the larger photo sizes. Most photos that were uploaded were between 5MB and 10MB. The current server has reduced them to less than 1 MB per image/photo for posting, while the larger ones are archived until we have a chance for the full restoration.

 

[oldandlively]

I kn

I know for sure that I checked this thread a few years ago, like 2023- 2024, and all the images were here.

If the posts contain photos between 2023 and 2024, they are backed up. The server switched to space-saving mode at that moment. All photos and videos we currently have are backed up and will be restored the moment we switch over to the larger server size. We're dealing with both I.T. on three fronts and the financial demands required to have the larger server on the 4th. So, yes, plenty of things to deal with behind the scenes to keep things running properly. So, be a bit more patient on this matter to restore the larger photo sizes. Most photos that were uploaded were between 5MB and 10MB. The current server has reduced them to less than 1 MB per image/photo for posting, while the larger ones are archived until we have a chance for the full restoration.

 

[Blueballs]

I completed a full week of PE since my comeback. All went great. I'm using a spreadsheet to track my daily adherence to the routine, stretching hours, Girth work, my EQ level, and another one for monthly progress. I'll measure at the end of each month and post the updates here.

During this week, I managed to get some great expansion during my Dry Jelqing session on Friday, which brought me to 6,75 NBPEL x 5.75 MSEG, so there's def something stretching and expanding in there, which gives me confidence that I can hit my goals.

I'll keep you updated as things go.

 

[Blueballs]

Hi guys,

I managed to get some of my old PE progress pics from an old Laptop that was in my parents' basement. I added one showing the NBPEL progress from my starting size og 5" all the way to 6.5"(around 20months of PE). And another one with different pics showing me in the extender., the last pic showing me at 8" stretched in the extender was taken this month after my comeback.

I think I'll leave this thread as it is and start a proper progress thread in the progress forums for the current routine.

 

[DLD]

Big ass cock, wow

 

[Blueballs]

The images don;t open in full screen, did old mentioned that there will be an update to the site on Oct 4th? I really want to start a new progress journal thread.

 

[oldandlively]

The images don;t open in full screen, did old mentioned that there will be an update to the site on Oct 4th? I really want to start a new progress journal thread.

You can keep updating the journal and provide photos. New logs and photos will backed up constantly. Old photos are on temporarily removal at the moment.

 

[Shotta609]

What do you think had best effect? If you had to choose one, how long did it take you to gain 2 inches? I honestly wouldn’t of believed it if there weren’t pictures, that blows my mind , it really does work

 

[oldandlively]

What do you think had best effect? If you had to choose one, how long did it take you to gain 2 inches? I honestly wouldn’t of believed it if there weren’t pictures, that blows my mind , it really does work

1 inch within 13 months or so, but I made sure to balance out my girth increase as well. 2.2 inches of length, while getting a good 2.1 inches of girth, took around 2.5 years.

 

[Blueballs]

1 inch within 13 months or so, but I made sure to balance out my girth increase as well. 2.2 inches of length, while getting a good 2.1 inches of girth, took around 2.5 years.

What was your girth routine like?

 

[oldandlively]

What was your girth routine like?

Pretty simple dynamic routine.

• Warm up the tissues with a warm rice sock using direct convection heat transfer
• Length routine first. If I'm focusing on girth, I'll use the LM to do BTC routine for 10 minutes to really loosen up the tissues.
• Warm tissues up again for 2 minutes
• Switch over to MV 1.75in cylinder. Pump up to -5.5inHg for the first 2 minutes. Switch up to -6.5inHg and back down to -5.5 every 60 seconds. Complete a 5 minutes initial warm up pumping set.
• Using SSJ with an aid of a TheraBand at the base to restrict blood flow to 90% for 3 minutes. Only use 80% blood volume (semi-erect) Switch over to power jelq at 100% blood volume for 2 minutes to maximize glans expansion. 1 minute on reverse jelq with highest compression as much as possible to move all blood and build-up fluid in the fascias.
• Warm up the tissues with rice sock for 2 minutes while allow the tissues to rest a bit. I perform reverse kegels at this point, with 10 seconds hold.
• Switch back to MV 1.75in cylinder. Pump up to -6.5inHg for the first 1 minutes. Switch up to -7.5inHg and back down to -6.0 every 30 seconds. Complete a 10 minutes pumping set.
• Using SSJ with the aid of a TheraBand at the base to restrict blood flow to 80% for 8 minutes. Only use 100% blood volume (full-erect). Switch over to power jelq at 100% blood volume for 2 minutes to maximize glans expansion. 1 minute on reverse jelq with highest compression as much as possible to move all blood and build-up fluid in the fascias.
• Rinse and repeat, but for the next few pumping sets, I go up to -10 inHg, and stay below -10inHg. I switch up to -13inHg every other day, but dynamically raise and drop pressure between -10 and -13 every 45 seconds. Bouncing provides the tissues to notice a change but not long enough with static pressure to cause stress.
• Perform a total of 4 to 5 sets. The last set always stay lower than -8inHg.
• Warm tissues at the end for 5 minutes.
• Perform post-pumping routine using a Theraband at 90% restriction, by getting erect and then relax, keeping the penis plump for the next 40 minutes.
• Wrap penis up after post routine.

 

[Blueballs]

Pretty simple dynamic routine.

• Warm up the tissues with a warm rice sock using direct convection heat transfer
• Length routine first. If I'm focusing on girth, I'll use the LM to do BTC routine for 10 minutes to really loosen up the tissues.
• Warm tissues up again for 2 minutes
• Switch over to MV 1.75in cylinder. Pump up to -5.5inHg for the first 2 minutes. Switch up to -6.5inHg and back down to -5.5 every 60 seconds. Complete a 5 minutes initial warm up pumping set.
• Using SSJ with an aid of a TheraBand at the base to restrict blood flow to 90% for 3 minutes. Only use 80% blood volume (semi-erect) Switch over to power jelq at 100% blood volume for 2 minutes to maximize glans expansion. 1 minute on reverse jelq with highest compression as much as possible to move all blood and build-up fluid in the fascias.
• Warm up the tissues with rice sock for 2 minutes while allow the tissues to rest a bit. I perform reverse kegels at this point, with 10 seconds hold.
• Switch back to MV 1.75in cylinder. Pump up to -6.5inHg for the first 1 minutes. Switch up to -7.5inHg and back down to -6.0 every 30 seconds. Complete a 10 minutes pumping set.
• Using SSJ with the aid of a TheraBand at the base to restrict blood flow to 80% for 8 minutes. Only use 100% blood volume (full-erect). Switch over to power jelq at 100% blood volume for 2 minutes to maximize glans expansion. 1 minute on reverse jelq with highest compression as much as possible to move all blood and build-up fluid in the fascias.
• Rinse and repeat, but for the next few pumping sets, I go up to -10 inHg, and stay below -10inHg. I switch up to -13inHg every other day, but dynamically raise and drop pressure between -10 and -13 every 45 seconds. Bouncing provides the tissues to notice a change but not long enough with static pressure to cause stress.
• Perform a total of 4 to 5 sets. The last set always stay lower than -8inHg.
• Warm tissues at the end for 5 minutes.
• Perform post-pumping routine using a Theraband at 90% restriction, by getting erect and then relax, keeping the penis plump for the next 40 minutes.
• Wrap penis up after post routine.

Wow, that's a lot of warm-ups. Wouldn't it be simpler to just have an IR lamp heating your unit all this time?

So, you're basically doing a 5x5x5 but with added expansion from the power jelqs in between SSJs?

Can you use a regular cock-ring instead of the Theraband? I have both, but the cock-ring is much easier to use.

 

[oldandlively]

Wow, that's a lot of warm-ups. Wouldn't it be simpler to just have an IR lamp heating your unit all this time?

The reason for the constant warm up is to keep the tissue constanly malleable. I like the direct conduction of heat transfer over convection. Yes, I've done many convection method as well, using hair blower, space heater, and even my red light therapy unit. But I also switch back to direct heat application for deeper penetration into the tissues.

So, you're basically doing a 5x5x5 but with added expansion from the power jelqs in between SSJs?

Exactly. 5x5x3 or 5x5x5 is merely a baseline. Modify it according to your needs.

Can you use a regular cock-ring instead of the Theraband? I have both, but the cock-ring is much easier to use.

Sure can. Whichever is more comfortable for you.

 

[oldboy77]

Hi Guys,

Here are a few pictures I took on this journey to build a bigger penis, I started at 5" NBPx5.1"MSG and gained up to 5.5"NBPx5.4"MSG in 4 months with the [words=[URL]http://www.mattersofsize.com/forum/penis-enlargement-newbie-forum/1597-dlds-first-routine-i-gained-2-inches-with-this-routine-full-tutorial.html]newbie[/URL] routine[/words] and after that bought a JES [words=[URL]https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Extender[/words[/URL]] and use it for 10 months for 4-6 hours/day with 20-30mins of dry Jelquing and Ulis in the evening, these pictures were taken during that period streching with the extender. The Extender took me to 6.5" NBP and you can see how I improved my attachment form the basic foam and silicone noose to a more comfortable silicone noose following fedora's method which was a gamechanger for me.

When it comes to the tension I think I went to 1200g after the first 1 or 2 months and after another 2 months I went to 1500g but I could do just 2-3h at 1500g as lig pain appears after that so my last sets of the day were made at ~1000-1200g.

I've attached a side-by-side picture that shows my progress from 5 to 6.5(20months of PE). the extender took me from 5.5(month 4) to 6.5(month 20).

Not the biggest gains in the world but I hope this will motivate some guys out there or at least give you hope that these devices work if given enough time.


~Blue

Can you tell me what is the fedora method with what you did the extender jes program?

 

[Blueballs]

Can you tell me what is the fedora method with what you did the extender jes program?

That was the wrapping technique I used to make the extender comfortable to use for many hours. The thing is that the noose-style extenders are very hard to use out of the box if you have some sort of wrapping.

The Fedora method was created in the late 2000s by an old MOS user named fedora, and I managed to outgrow it eventually by creating my own wrapping technique, which I use now.