Hydromax suction problem

M

Metroman35

0
So far love the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words]. However, I seem to have an issue getting suction unless the valve of the tube is pointed in the air. If I position the tube downward and insert myself then level it out and pump as I did with my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] I can't get any suction water goes out but air comes back in the valve as well

Anyone else with this issue? Any suggestions?
 
Hey Metroman,

I just recently purchased a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words] myself, and am having similar issues.

Question : Can you continuously pump after you have released the latch valve initially, or do you need to Pump then lock the valve for each respective pump? The pumping on the previous [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] was continuous.

Several people have already mentioned issues concerning the suction, so we're trying to figure this out.

Thanks!
 
Metroman35;510404 said:
So far love the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words]. However, I seem to have an issue getting suction unless the valve of the tube is pointed in the air. If I position the tube downward and insert myself then level it out and pump as I did with my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] I can't get any suction water goes out but air comes back in the valve as well

Anyone else with this issue? Any suggestions?
Click to expand...


Do you use it outside the bath? if so, do you use vaseline on the gator end and where the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words] meets the gator.
 
flannery;510413 said:
Hey Metroman,

I just recently purchased a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words] myself, and am having similar issues.

Question : Can you continuously pump after you have released the latch valve initially, or do you need to Pump then lock the valve for each respective pump? The pumping on the previous [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] was continuous.

Several people have already mentioned issues concerning the suction, so we're trying to figure this out.

Thanks!
Click to expand...

Continuous pumping
 
K- Thanks! - Mine must be defective

As for your issues - trim area + remove [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words] + add vaseline to test true suction while pumping :)

***Warning : DO NOT ADD VASELINE TO INSIDE OF [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]COMFORT PAD[/words] - IT WILL BECOME A SLIPPenis EnlargementRY MESS AND SEPARATE FROM THE GATOR***
 
I'm contacting [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] tomorrow to see about a replacement. I assume that if this was part of the design that DLD would have noticed it when he first used it. Must be a faulty batch.
 
Have you try to open the switch on the valve? Because if the switch is close then you won't get a decent suction.
 
rayz;510475 said:
Have you try to open the switch on the valve? Because if the switch is close then you won't get a decent suction.
Click to expand...

Wait so when we first put it on we are supposed to have the switch at the top on open instead of locked when we first put it on then lock it?
I thought we were supposed to always keep it locked and get suction off of that.
 
Papi Champagne;510499 said:
Wait so when we first put it on we are supposed to have the switch at the top on open instead of locked when we first put it on then lock it?
I thought we were supposed to always keep it locked and get suction off of that.
Click to expand...

Ok this is what happen last night. I filled up with water while the switch was closed. There was still little water leaking out on the top then I attached it onto my penis and couldn't get a decent suction. It's like the pump is not giving enough suction and pressure was not that much to my penis so I try to open the switch where the water came out from the valve similar to [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] then I tried to pump it. It works and I have a good suction and pressure from it.
 
The valve needs to be in the open position, expel water, lock valve. You can pump to a certain pressure and set it there. I am also loving it without the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words]:)
 
rayz;510503 said:
Ok this is what happen last night. I filled up with water while the switch was closed. There was still little water leaking out on the top then I attached it onto my penis and couldn't get a decent suction. It's like the pump is not giving enough suction and pressure was not that much to my penis so I try to open the switch where the water came out from the valve similar to [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] then I tried to pump it. It works and I have a good suction and pressure from it.
Click to expand...

Yuppers!
 
doublelongdaddy;510506 said:
The valve needs to be in the open position, expel water, lock valve. You can pump to a certain pressure and set it there. I am also loving it without the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words]:)
Click to expand...

Well this explains why my ligaments are in pain.
I have just been keeping it locked and pushing water out that way. (It kills my ligaments)
I will try it this way tonight.

But lets say I do it the way you say and I push the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] all the way down... After that do I just wait and let it do its work or do I need to keep pumping?
 
Well this explains why my ligaments are in pain.
I have just been keeping it locked and pushing water out that way. (It kills my ligaments)
I will try it this way tonight.

But lets say I do it the way you say and I push the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] all the way down... After that do I just wait and let it do its work or do I need to keep pumping?

Should be much more comfortable. Once you have a pressure you like, stop pumping.
 
I don't keep the valve locked or switch from locked to unpicked either. As long as I have the valve unlocked and above a 90 degree angel I can continuously pump without any issues. It just seems strange that if the valve is pointed down even a bit air comes in
 
Good shit! I mean I guess if someone really wanted to have their own place they could do it pretty cheap. With a bedroom bath and kitchen it is a regular apartment. Nice find and please post pictures as you do the remodel. Do a wet floor in the bathroom just for water pumping:)
 
I just had a talk with the inventor,

He said that you need to press down on the valve before it can move left,
middle or right.

It can be quite stiff to begin with, the more latch the is clicked the
softer the switch becomes.

When the valve is in the middle, not left or right, it works like a
normal [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words].

In other words just hold the black valve in and it will fill with water.

We should have a video explaining this soon.
 
ErikS;511118 said:
I just had a talk with the inventor,

He said that you need to press down on the valve before it can move left,
middle or right.

It can be quite stiff to begin with, the more latch the is clicked the
softer the switch becomes.

When the valve is in the middle, not left or right, it works like a
normal [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words].

In other words just hold the black valve in and it will fill with water.

We should have a video explaining this soon.
Click to expand...

Yes, I am on making the video asap. Possible a quick tutorial this evening.
 
Mine works better now. Vas helps a lot with the suction
Problems. The 35 percent more power is awesome. This model
Is more comfy than [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]herc[/words] even without [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words]. It does more in
Less time
 
johnbonesjones;511306 said:
Mine works better now. Vas helps a lot with the suction
Problems. The 35 percent more power is awesome. This model
Is more comfy than [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]herc[/words] even without [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words]. It does more in
Less time
Click to expand...

Good Shit! It takes a bit of learning but once you got it down the power becomes obvious.
 
Metroman35;511693 said:
Past 2 days I've been pumping without any problem. I think the valve just needed to be broken in a bit.
Click to expand...

Second time I have heard this. Thanks for the update as it will help others understand that there may be a learning period typified by a breaking in period. I wish the valve was less complicated but they changed it for good reason.
 
Great feedback, definitely helping the learning curve.
 
Learning curve aside this thing is great. My "pump" and flaccid hang last more than 24 hours. And I haven't even reached max pressure until the very end of the 20 min
 
Metroman35;511774 said:
Learning curve aside this thing is great. My "pump" and flaccid hang last more than 24 hours. And I haven't even reached max pressure until the very end of the 20 min
Click to expand...

The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] an amazing pump and I am so happy to see the company growing and bringing new innovations. It is a very exciting time in the Penis Enlargement world!
 
Just used it for the 1st time today and yes, it seems like it needs to be broken in. Terrible suction with and without the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words]. I could easily pull it off at the max pressure, so hardcore stretches are out of the picture so far.

One thing I will say, is it seems to be pulling more from the ligs than the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]herc[/words].
 
bjv;512477 said:
Just used it for the 1st time today and yes, it seems like it needs to be broken in. Terrible suction with and without the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words]. I could easily pull it off at the max pressure, so hardcore stretches are out of the picture so far.

One thing I will say, is it seems to be pulling more from the ligs than the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]herc[/words].
Click to expand...

Breaking in and learning the valve system is very important to the new [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words]. EVery one of us has experienced just what you are saying and have solved it. Hardcore stretches can only be done with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words] removed. The pressure, which at times seems low, is in fact very high, the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words] masks much of the intensity but after a session it becomes obvious that the ligaments are being very trained. Once the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] is mastered these issues are solved. Give yourself some more time and read through the few posts on the topic, some great advice.
 
Do you think the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] works more on ligs than the regular [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] ? The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words] felt awesome, so if it's doing more lig work, I'll leave it on. I love hardcore stretches though :) My [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] time is the only guaranteed time for pe during the day and i'm using it for length.
 
bjv;512718 said:
Do you think the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] works more on ligs than the regular [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] ? The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words] felt awesome, so if it's doing more lig work, I'll leave it on. I love hardcore stretches though :) My [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] time is the only guaranteed time for pe during the day and i'm using it for length.
Click to expand...

That is definitely the consensus here, ligaments are getting serious workouts.
 
I have still had troubles getting as much suction with my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words]. I have tried over 10 times now and have done it with and without the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words]. I even did it in the tub suBathmatemerged and it still doesn't suction well. I get a better pump with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] model. No offense but I want this to work. I am on a mission to get myself over 7" and this is slowing down my progress.

I wrote to [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] and got a reply that they will replace the unit or they could send me a new valve like the one on the regular [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] model. I would like tog go with the same valve as the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] model.

I hope this helps others.
 
DocHollywood;513241 said:
I have still had troubles getting as much suction with my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words]. I have tried over 10 times now and have done it with and without the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words]. I even did it in the tub suBathmatemerged and it still doesn't suction well. I get a better pump with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] model. No offense but I want this to work. I am on a mission to get myself over 7" and this is slowing down my progress.

I wrote to [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] and got a reply that they will replace the unit or they could send me a new valve like the one on the regular [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] model. I would like tog go with the same valve as the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] model.

I hope this helps others.
Click to expand...

Try this. Sit in the bath with the tub filled with water. And when you insert yourself into the tube push it against your body, then angel the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] upwards above the water line and begin pumping.
 
Metroman, I have done this and the valve still let's air or water back in. I think I have a defective valve even after I get a decent pump it still let's air or water back in and that is even with the valve switched to the off position. The suction is still less than my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. Hopefully I will get this resolved soon. I hate to have spent the money for a defective item.
 
It takes some time to break in according to many users. Learning the valve system does take time. I really wish it were a bit easier. Try this, on a flat surface place the pump flat on the table and break it in by pumping and releasing air, over and over. This helped me break it in and understand the valve system better.
 
I wasn't getting great suction with my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words] and it is more than broken in. so for the past few days I've been using my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words] with my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]herc[/words]'s valve and wow what a difference it has made! suction is actually too strong. I haven't gotten to max pressure yet, I don't think, but my expansion is bigger than I've ever seen it. with not a lot of fr neither. that's probably because I'm experienced and conditioned from my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]herc[/words]. I'm actually filling my boxer briefs right now, wearing only that while sitting on the couch swyping this on my cell, and my girl is cleaning some chairs we picked up from a craigslist ad, sitting across from me with a goofy sexual look in her eyes. woohoo! loving this [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words]! hope I can finally start making permanent gains again.
 
I received my new valves both [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words] and [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. It definitely works better with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] valve but now it sucks air through the base. I have tried using it with and without the base. My honest opinion is that the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] is much better. Anyone want to purchase my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words]? I'll include the extra valves. Make me a decent offer.
 
Do they sell the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Herc[/words] valves seperately? I would like to test this the difference :)
 
ExtraLarge;519924 said:
Do they sell the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Herc[/words] valves seperately? I would like to test this the difference :)
Click to expand...

No, you would have to modify it using an old [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. I knew some guys would do this...I just know the way some of you guys think!
 
Okay after some more tinkering I think I have solved my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words] issues. I replaced the valve with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] valve and used some silicone sealant between the comfort ring and the gator. I was able to get a pump without losing pressure for once. It is definitely more comfortable then the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] model. Now if the damn sticker had the right measurements on it.

I will have to do more pumping to see the overall effects but at least I now have two pumps that work.
 
DocHollywood;520516 said:
Okay after some more tinkering I think I have solved my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words] issues. I replaced the valve with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] valve and used some silicone sealant between the comfort ring and the gator. I was able to get a pump without losing pressure for once. It is definitely more comfortable then the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] model. Now if the damn sticker had the right measurements on it.

I will have to do more pumping to see the overall effects but at least I now have two pumps that work.
Click to expand...

Good modification Doc! I bet there will be a big market for [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] valves in the future.
 
doublelongdaddy;510506 said:
The valve needs to be in the open position, expel water, lock valve. You can pump to a certain pressure and set it there. I am also loving it without the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words]:)
Click to expand...

Hi DLD,

I'm a newbie to this forum, let alone Penis Enlargement. I've just got the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words] yesterday (my first pump ever). As such, I was dummy (zero knwledge/experience) to this pumping item and that throughout the whole night I've tried to figure out how to use it. I've tried to follow the method from the video (Bathmate website). When I first pump (when the valve is unlock) my flaccid penis began to erect and kinda get a good suction. But as soon as all the water has been expel. My penis slowly revert back to flaccid state and lose its suction. Only after several attempts i found out the only way to maintain a good suction is locking the valve once the intended pressure has been obtained. Is this the correct method? As i've mentioned i'm new to this pumping. Also, I've tried to research step by step procedure of how to use the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]. So far it was mentioned like e.g "pump for 5 to 10 mins". I kinda dun get it coz from what I experience, pumping took less than a min since all the water has been expel. Does that mean that you have to refill the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words] with water and pump again until you reached 5 to 10 mins or once you got the suction (by locking the valve) you leave it for that 5 to 10 mins? Is there any step by step video that I can follow? Need your advice.
 
Hey Oribitx,

some tips i can give you are:

-go in erect
-shave or trim your pubes
-after entering, before pumping pull ur balls down
-try it without the comfortring

I have tried pumping flaccid.. and i cannot get the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] to work that way.. either i get stuck to the side or, dont know what but doesnt feel good, gets sucked in.
Going in erect and kegeling when you pump gives me max length in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words].

Also, i figured this out thinking why another member had problems not going above his normal length.. you might want to try and place the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] lower on yourself. So have your cock hug the top of the tube if you would be holding it horizontally.. hope that makes sense :)
 
[Q OTE=ExtraLarge;522701]Hey Oribitx,

some tips i can give you are:

-go in erect
-shave or trim your pubes
-after entering, before pumping pull ur balls down
-try it without the comfortring

I have tried pumping flaccid.. and i cannot get the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] to work that way.. either i get stuck to the side or, dont know what but doesnt feel good, gets sucked in.
Going in erect and kegeling when you pump gives me max length in the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words].

Also, i figured this out thinking why another member had problems not going above his normal length.. you might want to try and place the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] lower on yourself. So have your cock hug the top of the tube if you would be holding it horizontally.. hope that makes sense :)[/QUOTE]


Hi Extralarge,

Thanks for your reply. So far i've tried all of the above except taking out the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words].Will give it a try & see how it goes. Anyway, I have a kinda small penis. 2+" flaccid & almost 4" erect, so kinda hard to even see my penis when pumping even when its erected.

Anyhow, back to my questions:-

1) am I'm doing the correct method; 'unlock' the valve when pumping and 'lock' the valve when achieving the desired pressure?

2) Also, when instructions mentioned to pump for 5 to 10 mins, does that mean that you've to keep on pump, refill, pump, refill & so on for 5 to 10 mins? Or does that mean that you have to leave on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] for 5 to 10 mins once you achieved the desired pressure (when you feel the firm suction)?

Sorry for asking too much.
 
orbitx;522771 said:
1) am I'm doing the correct method; 'unlock' the valve when pumping and 'lock' the valve when achieving the desired pressure?
Click to expand...

Some would say yes, but you never need to lock the valve unless you want to fill it up with water when not in a bath.
As soon as you pump and create a vacuum that vacuum will pull in the valve locking it for you.

orbitx;522771 said:
2) Also, when instructions mentioned to pump for 5 to 10 mins, does that mean that you've to keep on pump, refill, pump, refill & so on for 5 to 10 mins? Or does that mean that you have to leave on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] for 5 to 10 mins once you achieved the desired pressure (when you feel the firm suction)?

Sorry for asking too much.
Click to expand...

They are talking about the total time you are inside the pump. As a beginner i would not go with the recommended max of 20min, but go slow.. do like 2 five minute sets and be sure to jelq or massage your penis before and in between sets. Listen to your penis :)

And never asking to much. There are allot of guys on here willing to help out.
 
Hello, I am totally new to this forum...I am writing here because I am confused with the valve of my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words]...I am a newbie of using a pump, my size is 5.3 inch and I want to have this problem of suction fixed as fast as possible. I bought it 15 days ago, I communicate with the company, but it does not help me out how to use it correct, perhaps they not understand me correctly, and there is no video..:((...As I see here are many people knowing this product, experienced, I am seeking the correct best solution..
I am using the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words] in the shower, I don't have a tub. I read all the topic, but still I am not clear about what I am doing wrong.

ExtraLarge:
As soon as you pump and create a vacuum that vacuum will pull in the valve locking it for you. ( I want this but I don't have this )

My workout:
1-) I warm up for 5 minutes in shower CORRECT
2-) I close the valve and fill with warm water, also have a semi erect CORRECT
3-) I get in and make the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] tight into my body fast without loosing water CORRECT
4-) I open the valve (middle) and start to pump almost slowly in forward (90 degree) position maximum 3 times even I do not get a harder penis , I pump3 times. Unsure about repeat more pump max 3 times or pump till I am harder but I loose too much water and thats the reason I pump maximum 3 times. Unsure how much water has to stay inside and air inside because water discharge is fast. Also the other problem is I get air inside back, what I have to do with the air.
5-) I close the valve (right or left) while I am pressing the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] pumb tight on the 3. pump onto my body Unsure about lock (right-left) the valve and closing it while pressing it tight hard onto my body or if I have to close it while I am not not pressing..Perhaps I do have not to close the valve back at all after the pumps, but in this way it is not staying on the base and no suction happened if I do not lock it. ( After reading all the topic here, my lock back is the wrong thing I suppose, but if I not lock it while I am pressing it hard onto my body, air is coming inside and no suction happen)
6-)I am standing first 5 minutes in this position and again pump and again 10 minutes wait MUST BE SIMILAR CORRECT maximum 20 minutes

At number 4 and 5 I am not sure if all is going correct, I loose too much water, perhaps I can not regulate the correct pressure, I don't know how many times to pump or to pump till I am harder, if I pump too much all water almost run out, if I pump 3 times maximum only is that enough, and do I have to close the valve after 3 times pump and how the timing of closing the valve (press the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] hard onto my body or not...

These are my main questions: I could not make the correct exercise at number 4 and 5

*Do I have a problem with the valve, or it is not correct installed?
*I don't want to use the " [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]" valve

( how to make this?)
*Past 2 days I've been pumping without any problem. I think the valve just needed to be broken in a bit.
*Yeah the valve does need to be broken in a bit.
This can maybe help me, but I can already open and lock the valve, is that something different as I understand?

* takes some time to break in according to many users. Learning the valve system does take time. I really wish it were a bit easier. Try this, on a flat surface place the pump flat on the table and break it in by pumping and releasing air, over and over. This helped me break it in and understand the valve system better. ( also not clear with this)

I really need a big help, I am so confused with a very simple pump and valve, when ı am pumping I don't get the pressure of water even I close the valve, because I have some air inside

Thanks to all who wants to help me in advance and give me a small support and reading effort..
 
DocHollywood;519569 said:
I received my new valves both [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words] and [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]. It definitely works better with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] valve but now it sucks air through the base. I have tried using it with and without the base. My honest opinion is that the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] is much better. Anyone want to purchase my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words]? I'll include the extra valves. Make me a decent offer.
Click to expand...

I am so confused on this issue, so many people like the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] over the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words].
 
doublelongdaddy;524819 said:
I am so confused on this issue, so many people like the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] over the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words].
Click to expand...

Hi, as I understand you have many experience with this, so your helps and others help can give me signifant improvements in using this device..my 2 marriages finished in base of a penis performance ( almost because of this, surely we had other problems also), now I want really to create a new penis performance and larger in girth and lenght size to avoid the risk of any problem of this..I started also to make exercises like jelq..Now I have a woman in my life since 3 months and she is fit with my performance, she like it, to be honestly, I experienced my best sex with her as I have had it in my previous times...and when I was speaking to her, that I will make my penis better and larger, she said that it is not needed I am a lion in the bed and she were happy very much of my performance..
So, however, I am not in agree with this, I lost 2 marriages based on a penis performance, and now I am loving her so much...If I will lose her because of any kind of a penis performance, my life will be really ruined...
Enough my story....Above I wrote detailed my problem with [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words] valve...is it normal if air is inside after pump..I try to avoid air but a little part is always inside sometimes more but I have suction..I close the valve while I am pushing it hard onto my body and stay a while..I don't have pressure of water, but there is a suction..But I have to close the valve with a perfect timing...In above answers to the topic I read , the vacuum closes it automatic (like in [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words]) and no air comes in...I am not sure what I am making wrong....Do I have to reset or install the valve or something? very strengh
Thanks for helps, again above I posted a detailed using of my perhaps wrong using..:)
 
You must log in or register to reply here.
Back
Top