Bathmate Printable Buying Guide

Dear all,

Just fresh from the designers table comes the "Print your own buying guide" if I can call it that. Simply print out, slap your hard penis on top and you'll see if you need X-40 or X-40.

1. Right click image and Save as... then open it to print.
2. Print the file, make sure to set your printer NOT to scale to fit the paper but print in "Actual size"
3. Fold the bottom edge of the paper do that the first gray line of the Bathmate gaiter (or cut).
4. Place your erect penis on top to see what model will fit you better.
5. Buy the correct size

Kind regards,

Agust

Great information as usual!

Nice

So what would the inside dimensions be for those not familiar with that? In NON metric dimensions?

Can this be stickied?

Converted, the max internal sizes are:

X-40: 7.48" x 5.65" (1.8" width)
X-40: 9.8" x 7.4" (2.36" width)

ZackD89;401706 said:

Can this be stickied?

Converted, the max internal sizes are:
X-40: 7.48" x 5.65" (1.8" width) X-40: 9.8" x 7.4" (2.36" width)

Click to expand...

Done

Would owners of Bathmates agree on these sizes? I've read that the X-40 can accomodate 9" x 6.5" and am wondering which numbers are the right ones.

ZackD89;402427 said:

Would owners of Bathmates agree on these sizes? I've read that the X-40 can accomodate 9" x 6.5" and am wondering which numbers are the right ones.

Click to expand...

Thread on this issue HERE but to answer your query NO the X-40 would not be suitable for a 9'' x 6 1/2'' penis. Its max dimensions are 8 1/2'' x 6 1/4'' while the X-40 max is 12 1/2'' x 8''.

ZackD89;402427 said:

Would owners of Bathmates agree on these sizes? I've read that the X-40 can accomodate 9" x 6.5" and am wondering which numbers are the right ones.

Click to expand...

If you stuff it in and fill it to the max you could get your dick in but there would be no room to grow. Get the X-40.

The whole point of a pump is to take what you have and make it feel the empty space. If you can fit it snug with no breathing room, then it's practically rendered useless. Get what you can't fit so you can later fit... make sense?

I know this is digging up a dead thread, but I wanted to ask to clarify: so if you lay your erect penis on this paper after printing it out, and for example, your penis is just a smidge wider than the one for the X-40, that means that you should use the X-40, right? Since the penis outlines on this chart state what the MAX penis size is for the usefulness of each Bathmate(?) I'm sitting at pretty much the exact outline of the one for the X-40, just a bit wider and have been using the X-40, but have been wondering if I needed to switch back to improve gains until I completely fill up the X-40...but that wouldn't be a good idea if the outline in the picture is saying that if you're as big as it, you need to switch to X-40.

Any guidance would be appreciated

Bump : )

Let me be more to the point - I'm 7.7 BPenis EnlargementL and about 5.8" MSEG (these measurements usually after pumping) should I be using the X-40 or the X-40? I own both and have been using the X-40 for a while, but my gains are Very slow. I fill up the X-40 almost Completely girth-wise after the end of my sessions and notice that i have the rings from the gaiter about an inch above the base of my penis after pumping, but I'm definitely not 6" or more in girth...

Someone had a great idea the other day. Maybe try splitting your time between the X-40 and X-40. Try the X-40 for 10 min then the X-40 for 10. Get some pump from the herc and insert your bigger size in the X-40. Sounded like a good idea to me. Might be worth a shot.

cmonsterski;480983 said:

Bump : )

Let me be more to the point - I'm 7.7 BPenis EnlargementL and about 5.8" MSEG (these measurements usually after pumping) should I be using the X-40 or the X-40? I own both and have been using the X-40 for a while, but my gains are Very slow. I fill up the X-40 almost Completely girth-wise after the end of my sessions and notice that i have the rings from the gaiter about an inch above the base of my penis after pumping, but I'm definitely not 6" or more in girth...

Click to expand...

Same advice as Metroman. You seem close to the limit of the herc (6"), so you should start herc, then go X-40.

1) Start using the Herc for some 5-10 min until you can stretch and pump the most of it. Go Erect or at least semi erect in it (important)
2) When it's hurting too much, or as soon as you're expanded enough (close to 6") continue your Bathmate session with the X-40 (Entering Erect if possible)

If it's not really painful in the herc, then stick to the herc until you reach 6", so you'll be able to stretch it more lengthwise and girthwise

Generally speaking of the Bathmate, you need to choose one of what seems to be the more efficient paths :
a) Either, go like Dan Clizer's way and make as many sets of 6 min X-40 Bathmate until you think it's too much fluid retention or it hurts too much (repeat twice a day or three times a day if you can), and jelq after that for some 10 min
b) Go DLD's way by supersetting SSJ or any Girth exercise you like between your X-40 Bathmate sets of 5-6 or 10 min

Then, you should be aware that Bathmate (permanent) exclusive gains are very slow to get (some don't get any at all). So I'd advise that after yout Bathmate session in the same day, if you can do it, you'd add a clamping session (edging or clamped SSJ/Ulis/Compression squeezes) or another Jelqing session, or a SSJ session on top of that to boost your girth gains.

Good luck ! Wishing you some good gains.

cmonsterski;480983 said:

Bump : )

Let me be more to the point - I'm 7.7 BPenis EnlargementL and about 5.8" MSEG (these measurements usually after pumping) should I be using the X-40 or the X-40? I own both and have been using the X-40 for a while, but my gains are Very slow. I fill up the X-40 almost Completely girth-wise after the end of my sessions and notice that i have the rings from the gaiter about an inch above the base of my penis after pumping, but I'm definitely not 6" or more in girth...

Click to expand...

If you are currently 6" of girth or above you want to gain beyond 6.5" go with the X-40. If you are below 6" the X-40 will be best.