The Chance Custom Extender...$45.00! or Directions to Make Your Own!

[chance]

All [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] orders will be on their way tomorrow. I have been offline due to a trojan spy infection of my computer. Sorry for any delays. I had to go to a friends house to check for the orders.

 

[chance]

My computer is finally operational again after the trojan horse invasion I had last week. We thought we were going to have to reformat the hard drive. Finally got it clean. Had six different trojans and they are a bitch to remove.

 

[DC4]

Are you supposed to pull ur skin over the head then apply it or no?

 

[loco]

I would say no. skin stretches and can cause slipping so I would imagine you wouldn't have foreskin stretched over the head for this.

hey chance is there a reason you went with the 2inch pvc? and does anyone have pics wearing this?

 

[chance]

No. Do not pull the skin over the head to apply the stretcher. That would either pinch like hell or the loose skin would cause the noose to slip over the head. Tighten the noose around the ridge of the head so it will have something to pull against. The area where the head and shaft meet.

 

[chance]

I use 2" pvc just as a precaution. If an erection were had while wearing the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words], it would take a fairly large girth to get stuck in the 2" pvc. I have used smaller pvc myself and never had problems due to any erections I had but I just didn't want to chance it when providing them for someone elses use. Understand?

 

[chance]

We have a couple of members who have ordered an [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] but haven't given us sufficient info to fill your order. We need your measurements and/or your address depending on which one of you it is. We know which members ordered but we need an address and info for each of you. PM DLD.

 

[sean2212]

Chance, I think I'll get one of your stretchers, but will probably not be able to afford it for another month (sooner I hope). I'd like to do my bit to support the forums, and also boost my routine.

Three quick and probably obvious questions:

Am I right in thinking the three measurements buyers need to give are flaccid length, erect length and flaccid stretched length?

Should the erect length be bone pressed or non bone pressed?

And that the foreskin should be retracted before wearing the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words]?

 

[chance]

We will need your bone pressed stretched length. Also tell us your diameter if you are thicker than a horse.

By the way, I like your avitar.

 

[sean2212]

Chance, Thanks for clarifying. I'll order a stretcher just as soon as my credit card allows.

Thanks for the comment about the avatar. Nadine's quite something 46 inches and an H cup. That top makes her look even more spectacular than she normally is, almost morphed (which she isn't).

 

[Kass]

Can you guys ship to a APO AP address? It seem you billing system does not allow it.

 

[chance]

Maybe I live a sheltered life. What is an APO AP address?

 

[bkkorps]

would you say that this hides pretty well under clothes, or is it something to just wear around the house?

 

[J05]

Maybe I live a sheltered life. What is an APO AP address?

Army Post Office

Does the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] hurt at the base where you put it on... since I noticed the pictures show that there's no cushion there

 

[chance]

Both questions at once. I think it can be worn pretty easily under cloths. You would want them to be a little baggy. I have worn mine at work during different intense times of Penis Enlargement. Mind you I have an office. But I have had to get up in front of people in my office to shake hands and I have walked down the hall to the water fountain and no one has noticed. My place of business is predominately women so they may have thought I had a boner rofl . But all kidding aside I think it will hide itself pretty well.

Also, I have never had a problem with the base hurting me because it did not have a cushion. I use a pretty thick piece of PVC for the base so it does not cause many problems. Obviously, if you use a tremendous amount of tension it might get uncomfortable after a while but I bet you would say uncle to the noose before the base started hurting you.

I don't see why we can't ship to an army post office unless you think they might check the box. I can see the headlines now, private JO5 caught heading an illegal penis stretching ring smuggling [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extenders[/words] onto base :blush: .
All kidding aside, I don't see a problem, but you know the Army better than me.

 

[haron88]

recently ordered, how long will it take to get to uk?

 

[chance]

It depends. Overseas shipping is a little uncertain. Based on what I have heard from the few that have gone overseas and depending on when DLD gets me your order, I would guess 10-15 days.

 

[phraze!]

yea or you can buy it for alot more on ebay around 200 bucks!

 

[haron88]

chance is there anyway you can tell me when you send it off?

 

[REDZULU2003]

I highly recommend the Chance [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words], the service is really good.
Didnt take long for me to get myn and I'm in the UK.

 

[chance]

chance is there anyway you can tell me when you send it off?

I can PM you when I send it, but I haven't received your order from DLD yet.

 

[Kraft]

I wanted to order, but when I got to the payment page it was $61 rather than 45. What's up? or is that the price without shipping?

 

[chance]

I would think that must be the shipping price and you must live overseas. Otherwise I am not sure. P.M. DLD with the question. He will know. I am just the builder.

 

[smallwannabebig]

are you accepting money orders?

 

[chance]

Again, that is a question for DLD, simply because he receives the money.

 

[Wannab]

I've not been on here for a while so this is a new thread to me.

I made something similar last last year, but instead of rope I used a cable clamp at the head. The design worked ok, but it seemed like I was always fidiling with it. I have not used it in a while.

I took a look at it again and was trying to figure out if I could change from using turnbuckles to some sort of spring design. I would think a constant spring tension might be better.

Any ideas?

 

[sp1100]

Could you tell me where I could buy the size turnbuckles that are used in this. (Turnbuckles(2) 5/32", 4-3/4" Eye/Eye)
Will a local hardware store provide these? Or can I get them online?

 

[loco]

most larger hardware or places like home depot or lowes should have them.

 

[chance]

Any hardware store.

 

[mk28]

hey chance. i ordered an [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] on 7/5 . can you tell me when i will get it? i asked dld but he must be busy.

 

[chance]

Sorry about the delays, all [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extenders[/words] are now on the way. I have been predisposed with the birth of my first child. Sorry for any inconvenience.

 

[mk28]

congrats on the firstborn. so should i be expecting the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] by this weekend?? just curious.

 

[sp1100]

I checked home depot online to see if they had turnbuckles, but it said they didn't. Should they have them in a store though? Does any one no of a place to get them online?

 

[REDZULU2003]

congrats on the new born

 

[chance]

I buy my turnbuckles from HOME DEPOT most of the time. We have one near by.

 

[sean2212]

Chance,

Congratulations on the baby! I look forward to receiving my [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] soon.

Cheers,

Sean.

 

[sensaZn]

mine didnt fit. i guess 6 months of manual stretching and jelqin will have to stretch it big enough.

 

[Ghosting]

Ok, I didnt know where to put in my flaccid and erect size when I ordered. 5" flaccid and 7.4" erect (NBP). Crud now people will know Im not 15x12. < lol

 

[chance]

I have had several people who have said they were to big. You need to tell me your bone pressed stretched flaccid length and don't exagerate. P.M me so I can give you my address. I will fix them for free if you mail them back to me. Sorry for the problems.

 

[Ghosting]

I have had several people who have said they were to big. You need to tell me your bone pressed stretched flaccid length and don't exagerate. P.M me so I can give you my address. I will fix them for free if you mail them back to me. Sorry for the problems.

In that case, my flaccid stretch is 9" and 8.2" BPenis EnlargementL.

 

[dragon65]

Great design and I can understand the concept, but it must be me, but I find that I am not actually long enough to get my get my head under the cord and have it resting on the pvc, what am I doing wrong here ?...frustrated

 

[sean2212]

Chance,

I'm still waiting for my [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words]. I ordered it on 24 June. Can you let me know what's going on with my order?

Thanks,

Sean.

 

[chance]

Due to multiple problems I have had with sending [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extenders[/words] out of the U.S. I will not be offering my [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] for foreign orders from now on. DLD and I are discussing whether we will continue to offer them for sell through me or let someone else build them.

 

[gunzoftheeast]

I was wondering if there was discreet shipping? If i place an order (I'm from CT in the U.S.), what will the package say? who will it say its from? thank you

 

[chance]

It will be addressed to you with my personal name and address as the return address. Plain brown box.

 

[gunzoftheeast]

In that case I'm going to order one right now. How long do you think it'll take to get to me? Thanks

 

[chance]

A few days. I am out of supplies right now. You should have it within a week or so after DLD sends me the money.

 

[gunzoftheeast]

I sent both you and him the measurements. I private messaged you. Thanks

 

[charlie]

Chance, I sent an order for an [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]Extender[/words] to you on September 15th. Can you give me an approximate date I can expect to receive it. (I tried to send a PM but the response was that your box was full and could not accept further messages until some are deleted).

 

[charlie]

I have not received the order I placed on September 15. Can you give me a status report? Thanks