Home Made Pump

[beardick]

So the deal is $45 for the pump and a tube 1 7/8" X 12" the length can be cut to desired length.

Other Diameters available are 1 1/8, 1 3/8", 1 7/8", 2 3/8"

There is photos of mine somewhere in this thread. I'm going to use epoxy to attach the plastic piece on top of the tube instead of silicone like i did on mine. It will be way stronger!

 

[REDZULU2003]

Great to finally have something in the pipeline. I have the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] at the moment which is a fucking monster and so brilliant at what it does but I'm always wanting to buy new Penis Enlargement gadgets and you seem to be a guy who knows how to make stuff, perhaps your an engineer or something? You'll be MUCH better at it than me.

What I'm after is a head pump. At the moment I use an exercise that I created to target head size and it does work, they are called Constricted Boa's and can be done in a pump as-well. Check my signature for more details. However I would still like a head pump to specifically target just that ... the head at a high pressure if I so desire, when need be. I'm not sure how the setup would be but you'll probably have an idea.

Also I'm looking for a device similar to what they had on offer at Mynewsize which was a Pump hanger and was essentially a tube which was pumped up with the penis in and than weights attached at the end for a good stretch. I want something like that. Not in a rush for this, but let me know if you can do something like it.

Something I do want pretty quickly is an attachment for the Max-Extender that replaces the dreaded noose with something like the FastSize [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] uses, think its a silicone tubeing or something like that. You would have to check out the Max-Extender site to see what the model looks like and see if you can do anything. If need be I can supply pictures of the part for further guidance. Its a small piece of string, like shoe lace threaded through the tube and tied at the back.

So let me know mate about those, especially at this time the head pump & attachment for the max.

 

[beardick]

Wow man you gave me a lot to work on. Hopefully by this weekend I can have some decent rough ideas for you. By the way I'm getting my length back. It's coming back a lot faster than I expected. Although I'm working it like a mad man. Stretching every time I go to the bathroom!

 

[REDZULU2003]

Good to hear

 

[BradTheGentlema]

bear dick any updates on the pump

 

[DLD]

bear dick any updates on the pump

Wondering too

 

[REDZULU2003]

I've messaged him many times in the past. He's quite busy with work.

 

[beardick]

Holy shit! I completely apologize guys. Summer has been SUPenis EnlargementR hectic for me. The economy in my town has really picked up. I have a full time job and a side business, and when it rains it pours. But I can't complain about making cash! So anyways I did briefly look into making the head pump. It's kind of a weird thing, not going to lie. It would be bad ass If I owned my own plastic injection machine, buuuuutttt I don't. So what I came up with isn't something I wouldn't want to out my name on, yet. Give me a little time guys and hopefully I can make something worth showing. And on a better note I did gain a little more "flaccid" length which is sweet but I still want the girth. Man, I just don't have the time to do the girth exercises. You really have to be committed. But anyway winter is coming so all the fun outside stuff will be over and I'll have more time to play with my cock! I also need to start working out again too. Startin to loose the mass, my chest went from 48" to 46" over the summer. Which sucks because I've still been bustin ass just not with perfect form and countable reps. Talk to you guys soon.

 

[REDZULU2003]

Good to know and talk soon mate.

 

[grosso]

I have this kind of pump:
http://www.eis.de/shop/product.phtm...ebe03ae36b3d27d12e8d528c7&lng=de_DE&prodanz=6
I bought an additional cylinder with a smaller inside-diameter (44 mm), because I think that I can train my penis more in lenght.
It seems to work, but I ask myself whether it would be a good idea to buy another smaller cylinder, with the inside-diameter of 34 mm
The problem is, that the company from where I can buy cylinders doesn't have cylinder with a inside-diameter biggern than 34 mm and smaller than 44 mm. So I do not know whether a inside-diameter of 34 mm would be a bit too small for my penis.
My penis has a circunference of 15,5 cm, namely a diameter of 5 cm.

What do you think, should I buy a smaller cylinder?
I want to gain more in length.
thanks
grosso

 

[grosso]

none of the thousands of [words=http://www.mattersofsize.com/join-now.html]MOS[/words]'s users is able to give me some advice on this matter?

 

[DLD]

The circumference of your tube should be a bit larger than you are after a pumping.

 

[grosso]

yes, I know it, in order to grow in thickness, but my interest is the lenght. I just wanted to know whether I could use a cilinder with an inside-diameter of 34 mm in order to stretch my penis in lenght. I have already been using a cilinder with a smaller circunference (44mm) then that of my penis and it works. The question is whether I should try with a smaller cilinder.

So I do not know whether a inside-diameter of 34 mm would be a bit too small for my penis.
My penis has a circunference of 15,5 cm, namely a diameter of 5 cm.

 

[DLD]

I am not sure on air pumping but I do know that guys who have switched from the smaller [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] to the larger [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] too soon found it difficult to stretch using the tube.

 

[grosso]

it is quite strange what you mentioning. I can't believe that the GURU of [words=http://www.mattersofsize.com/join-now.html]MOS[/words] has never used an air pump.
Besides, your answer is not related to my question, since it says the opposite.
I aked whether it would be good to use a thinner cilinder in order to stretch in the lenght, but you answer saying that using a larger cilinder may cause problems.

 

[grosso]

Hydromaxm.... it seems that nobody understands my simple question!

 

[dcory]

I would say a skinnier tube,i had the same problem,it got thicker than longer.im now 7 inches long,and 5 inches girth..so the skinnier tube works better,hope that helps,and good luck

 

[seekngirth]

I personally just want to find a cheap pump that will help me work on my girth (5.6 msg) that ISN'T the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] (which appears to be a rip-off in all the legitimate reviews I've read - unless you have a pool and/or like to squat over a bucket of water hahaha).

 

[Dan_Clizer]

I personally just want to find a cheap pump that will help me work on my girth (5.6 msg) that ISN'T the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] (which appears to be a rip-off in all the legitimate reviews I've read - unless you have a pool and/or like to squat over a bucket of water hahaha).

seekngirth,

I'm not sure what you mean by: "legitimate reviews", but I've used the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] to increase my base girth 1" in the last 6 weeks. I've gone from 6" to a 7" base in that time. The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] plus manual exercise works and works very well! When I'm in the tube now my base is expanding into the 8" range. Its absolutely incredible what you can do with these [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]'s given consistency.
I use the bucket system in my shower. It works very well and uses very little water. If you have more questions, just ask. There are lots of people that are happy to help.

Dan