I just want a solution...

[AF3]

The [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words] seems damn effective and it seems like a really great device. I just wish I could wear it for more than 25 minutes at a time without the pain in my glands being so bad that I can't think straight (this is actually my litmus test.) It's fine for the first ten minutes, I start to notice it after about fifteen, and then by the time 25 rolls around the head of my dick is a mixture of pain and numbness when I take off the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words].

I've bought the [words=http://TLCTugger.com/MOS]Tugger[/words]. My lack of foreskin makes it currently unusable.

I've used the Velcro Mod. I've used both soft and hard Velcro for the Velcro mod.

I've tried wrapping with all of the following when I use the Velcro Mod:
[words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]Ace Bandage[/words]
Cotton
A sock!
Cloth

I've used many of these wraps in combination with each other and I still get the same result.


I just want a solution that will work so I can wear the thing for at least 40 minutes at a time without feeling like my dick is going to fall off. I honestly feel like I've tried everything with the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] and I'm kind of stuck. In no way am I giving up, but I'm really at a loss for what to do.

I know that Supra suggested the canister method for the [words=http://TLCTugger.com/MOS]Tugger[/words]. I appreciate the help, but given that I've spent about an hour per day for the last two weeks just trying out different methods and wraps with the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] (in addition to buying the [words=http://TLCTugger.com/MOS]Tugger[/words]), there's just no way
I'm going to buy this and the extra [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] bars I would have to buy with it at the moment.



AF

 

[MAXAMEYES]

Well, this might not be the direction you wanna take, but have y'ever thought of a light coat, (dab or two) of some good ol' Oragel around the affected area(s) ?
Might not be a permanent solution but could just ya help muscle through a tough spot while yer gettin' used to the thing.

 

[AF3]

I mean my main concern is that only wearing the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] for 20-25 minutes at a time will reduce it's effectiveness. If I had to go in 20 minute cycles with a one minute break to BTC stretch and then reapply, I would be willing do this 30 times a day if that's what it took to get the required time under tension. Do you think that would be effective?


20 Minutes in [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words]
BTC Stretch 2 [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]x 30[/words] Seconds
Repeat

 

[AF3]

I'm looking up what you suggested now. It's an interesting idea, but wouldn't applying something like Oragel run the risk of reducing sensitivity over the long haul?

 

[AF3]

By the way I just realized what's causing the pain. It's the Velcro Strap pushing into the base of my glans as the stretch wears on if that makes sense. Should I just apply the headpiece lower down my shaft and take a reduction in the length I can stretch with the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] for now?

 

[MAXAMEYES]

Damn glad you found the cause, I've never worn an [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] so you'd have to go find somebody with real experience.
I DO know, however, that a lot of guys have had the same complaint about pain and finding the right wrap technique and fabric always seems to be the key to best comfort.

Search on here for fedora.
He did some damn fine work and some damn good documentation of it.

 

[AF3]

Lol is this the one?

http://www.mattersofsize.com/forum/...-of-padding-for-extender-use&highlight=fedora

 

[Super]

The [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words] seems damn effective and it seems like a really great device. I just wish I could wear it for more than 25 minutes at a time without the pain in my glands being so bad that I can't think straight (this is actually my litmus test.) It's fine for the first ten minutes, I start to notice it after about fifteen, and then by the time 25 rolls around the head of my dick is a mixture of pain and numbness when I take off the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words].

I've bought the [words=http://TLCTugger.com/MOS]Tugger[/words]. My lack of foreskin makes it currently unusable.

I've used the Velcro Mod. I've used both soft and hard Velcro for the Velcro mod.

I've tried wrapping with all of the following when I use the Velcro Mod:
[words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]Ace Bandage[/words]
Cotton
A sock!
Cloth

I've used many of these wraps in combination with each other and I still get the same result.


I just want a solution that will work so I can wear the thing for at least 40 minutes at a time without feeling like my dick is going to fall off. I honestly feel like I've tried everything with the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] and I'm kind of stuck. In no way am I giving up, but I'm really at a loss for what to do.

I know that Supra suggested the canister method for the [words=http://TLCTugger.com/MOS]Tugger[/words]. I appreciate the help, but given that I've spent about an hour per day for the last two weeks just trying out different methods and wraps with the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] (in addition to buying the [words=http://TLCTugger.com/MOS]Tugger[/words]), there's just no way
I'm going to buy this and the extra [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] bars I would have to buy with it at the moment.



AF

You can make the canister out of a film case and then bend a hanger wire to act as the hook. Then all you need is tape. Get the whole project done for less than $10

http://www.tlctugger.com/downloads/UsingtheCanisterMethod.pdf
http://tlctugger.com/prodCK.htm

 

[AF3]

Thanks Supra. I just applied the headpiece lower down the shaft and that seems to have solved the problem.

 

[Super]

Sweet problem sovled!

 

[AF3]

Yeah I was really pushing hard to stretch past EL and when I would get into the device with that many rods on, the strap would end up right beneath my glands. As the stretch wore on the base of my glans would end up pushing into the strap and the friction would get unbearable. Ideally you're supposed to be strap in about an inch below where the glans start, correct?

AF

 

[Jdcsd]

Are you putting something softer on first under all these wraps? Foam pad that came with it, theraband, thin sheet of silacone? Every wrap you mentioned would be painful without something under it. I use the foam cylinder that came with [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]sg[/words] and wrap [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace bandage[/words] around that and I go hour and a half no problem

 

[AF3]

Thanks Jdscd, I think I was just being too ambitious with the length to be honest. When I dial it back there's no pain from my dick trying to slip out of the stretch.

 

[Jdcsd]

Thanks Jdscd, I think I was just being too ambitious with the length to be honest. When I dial it back there's no pain from my dick trying to slip out of the stretch.

Yah you problem were just wrapping too high which causes pain in the glans. I've seen a lot of people do that in pics cause they want as many bars on as possible even if it isn't on right. It's prob good you figured out to take it down a notch

 

[DLD]

Problem and solution before I even got to read! Good work men!

 

[AF3]

Problem and solution before I even got to read! Good work men!

Well not quite. I really thought that would solve it, but now I'm about half an hour in on a length that really shouldn't cause any pain, and I'm still getting pain in my glans. The problem seems to be that the head of my dick slowly starts slipping out of the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] over time, and this causes the gase of the glans to start pushing into the strap. I really don't know what to do.

 

[DLD]

Dear friends I wanna ask something. If I order through the link displayed on [words=http://www.mattersofsize.com/join-now.html]matters of size[/words] website I would be able to buy the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]size genetics[/words] [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] for $165. is this true?
also, are there any hidden charges. I just registered as a member on the [words=http://www.mattersofsize.com/join-now.html]MOS[/words] forum, am I able to avail this offer. please reply. Also if a guest applies through the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]size genetics[/words] link of $165, are they going to look for any verification because it says that its exclusive only for [words=http://www.mattersofsize.com/join-now.html]MOS[/words] member. Thank you.
here's my email [email protected]
please reply soon.

Yes, the special is $165, order it through my signature. There are no hidden charges, just a great deal.

Click here to order SizeGenetics at $165.00

 

[Jdcsd]

Yah I just said this to you in another thread but you need to wrap a longer piece of [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace[/words] around you to thicken you up so you don't slip out. If I use an 8in piece it's not thick enough and I slip out. I use a 12 in piece and no slippage. The comfort strap has a design flaw in that it takes more girth to use than is even possible to put through it. You need like 6in girth to stay in it and prob 9in girth to have it on its loosest setting which isn't even possible. So anyways thicken yourself up with more wrap of self ashesive [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace[/words] and I guarantee you won't slip

 

[AF3]

Yah I just said this to you in another thread but you need to wrap a longer piece of [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace[/words] around you to thicken you up so you don't slip out. If I use an 8in piece it's not thick enough and I slip out. I use a 12 in piece and no slippage. The comfort strap has a design flaw in that it takes more girth to use than is even possible to put through it. You need like 6in girth to stay in it and prob 9in girth to have it on its loosest setting which isn't even possible. So anyways thicken yourself up with more wrap of self ashesive [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace[/words] and I guarantee you won't slip

Thanks Jd, I redid the Velcro Mod and it seems to work a whole lot better this time. Now just to find the right wrap. I'll try the [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]Ace Bandage[/words] again. I'm not using the comfort strap or foam wring, mine broke, just t-shirt material and the [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]Ace[/words]. At least this thread has taught me that slippage is what causes the majority of problems with the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words].

 

[Jdcsd]

I'm gonna get that vac attachment I told you about in the next couple weeks. I'll let you know how it works out. People have said they can go 2+ hrs in it. If that's the case I can probably add an hour or 2 a day of time in which would be great

 

[AF3]

Yeah I looked at that website but the amount of misspelled words and general half-assedness of it gave me a little pause. I also didn't see any type of money back guarantee, but would definitely like to hear what you think of it if you decide to.

 

[touchmyjunk]

Now just to find the right wrap.

Silicone tape. Take about 3' and dust it with baby powder to reduce the tackyness. Mount the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] base. Then wrap while erect about 3/4" behind the glans rim. Wrap to approx 1-1/2" width. In the center of your wrap, set up the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] head attachment with the velcro strap (I use approx 11" of 3/4" wide velcro one-wrap) and cinch it moderately whilst still erect. Let erection subside to approx 50% and then cinch the velcro to a consistent metric you establish. I have a particular metric where I feel the right amount of core compression which is non-slip and yet still maintains circulation.

Then attach the rods. My method is to use one long piece in the head attachment, then screw the lengths together in-situ. This takes practice, and I will extend in 3 to 4 sessions of 5 minutes each until I reach my proper extension once things have normalized.

I extend in the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] at full tension for hours at a time. No discomfort. Never an issue with slippage. Only issue is having to pee and a bit of chafing at the base. I have hogged out the base a bit to alleviate that and I also now add some rotary movements at intervals to allow the skin to normalize.

When extending it's important to recognize the difference between pain which will incur damage, and pain which is a normal part of the extending process. This is because when done improper you can not only incur damage, but you may also prevent the exercise from being effective.

For example, you may have trapped skin or an acute pinch somewhere which can give the illusion of having too much tension, when the reality is that it is just skin irritation which must be solved before the proper extending force can be applied.

Hope it helps. I feel guilty about you guys having wrap troubles. I pretty much went a year of use while struggling with getting it to work for me, but now I am getting some pretty clean gains when combining it with manual stretches. So far about 1/4" a month. The [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] is really a great product once you get that head piece & wrap figured out to where you can use it consistently.

 

[Jdcsd]

Yeah I looked at that website but the amount of misspelled words and general half-assedness of it gave me a little pause. I also didn't see any type of money back guarantee, but would definitely like to hear what you think of it if you decide to.

Haha. Well I bought the sleeves on there and love them. I've got my dick extended to almost my el for 7 straight hrs with no pain or loss of blood flow and a pound of weight hanging from it. And I cut 2 inches off the silicone sleeve and use it for [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]sg[/words]

 

[AF3]

Silicone tape. Take about 3' and dust it with baby powder to reduce the tackyness. Mount the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] base. Then wrap while erect about 3/4" behind the glans rim. Wrap to approx 1-1/2" width. In the center of your wrap, set up the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] head attachment with the velcro strap (I use approx 11" of 3/4" wide velcro one-wrap) and cinch it moderately whilst still erect. Let erection subside to approx 50% and then cinch the velcro to a consistent metric you establish. I have a particular metric where I feel the right amount of core compression which is non-slip and yet still maintains circulation.

Then attach the rods. My method is to use one long piece in the head attachment, then screw the lengths together in-situ. This takes practice, and I will extend in 3 to 4 sessions of 5 minutes each until I reach my proper extension once things have normalized.

I extend in the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] at full tension for hours at a time. No discomfort. Never an issue with slippage. Only issue is having to pee and a bit of chafing at the base. I have hogged out the base a bit to alleviate that and I also now add some rotary movements at intervals to allow the skin to normalize.

When extending it's important to recognize the difference between pain which will incur damage, and pain which is a normal part of the extending process. This is because when done improper you can not only incur damage, but you may also prevent the exercise from being effective.

For example, you may have trapped skin or an acute pinch somewhere which can give the illusion of having too much tension, when the reality is that it is just skin irritation which must be solved before the proper extending force can be applied.

Hope it helps. I feel guilty about you guys having wrap troubles. I pretty much went a year of use while struggling with getting it to work for me, but now I am getting some pretty clean gains when combining it with manual stretches. So far about 1/4" a month. The [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] is really a great product once you get that head piece & wrap figured out to where you can use it consistently.

Haha man to be honest I read the whole thing but pretty much interpreted it as "yeah try silicone tape and see where that goes."

 

[Jdcsd]

Silicone tape. Take about 3' and dust it with baby powder to reduce the tackyness. Mount the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] base. Then wrap while erect about 3/4" behind the glans rim. Wrap to approx 1-1/2" width. In the center of your wrap, set up the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] head attachment with the velcro strap (I use approx 11" of 3/4" wide velcro one-wrap) and cinch it moderately whilst still erect. Let erection subside to approx 50% and then cinch the velcro to a consistent metric you establish. I have a particular metric where I feel the right amount of core compression which is non-slip and yet still maintains circulation.

Then attach the rods. My method is to use one long piece in the head attachment, then screw the lengths together in-situ. This takes practice, and I will extend in 3 to 4 sessions of 5 minutes each until I reach my proper extension once things have normalized.

I extend in the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] at full tension for hours at a time. No discomfort. Never an issue with slippage. Only issue is having to pee and a bit of chafing at the base. I have hogged out the base a bit to alleviate that and I also now add some rotary movements at intervals to allow the skin to normalize.

When extending it's important to recognize the difference between pain which will incur damage, and pain which is a normal part of the extending process. This is because when done improper you can not only incur damage, but you may also prevent the exercise from being effective.

For example, you may have trapped skin or an acute pinch somewhere which can give the illusion of having too much tension, when the reality is that it is just skin irritation which must be solved before the proper extending force can be applied.

Hope it helps. I feel guilty about you guys having wrap troubles. I pretty much went a year of use while struggling with getting it to work for me, but now I am getting some pretty clean gains when combining it with manual stretches. So far about 1/4" a month. The [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] is really a great product once you get that head piece & wrap figured out to where you can use it consistently.

Why do you go in erect and why do you wrap so far from your glans?

 

[touchmyjunk]

Why do you go in erect and why do you wrap so far from your glans?

Starting the wrap while erect allows the head to retain a bit of shape as I cinch down. Also it keeps the tape taught. I wrap while erect, and a light cinch on the velcro. Then I do a final tight cinch on the velcro at about 50% erection. Then I attach the rods.

The positioning of the wrap is one of experimentation. As you extend, it will scooch a bit towards the head and so with my 3/4" positioning it winds up right at the rim. Also the silicone tape will bunch up on the glans rim to soften the contact.

 

[Deleted member 119539]

toucHydromaxyjunk,

Can you set us up with a pic of your set up please?

Starting the wrap while erect allows the head to retain a bit of shape as I cinch down. Also it keeps the tape taught. I wrap while erect, and a light cinch on the velcro. Then I do a final tight cinch on the velcro at about 50% erection. Then I attach the rods.

The positioning of the wrap is one of experimentation. As you extend, it will scooch a bit towards the head and so with my 3/4" positioning it winds up right at the rim. Also the silicone tape will bunch up on the glans rim to soften the contact.

 

[Super]

AF3 catch me up what is going on, let me see if I can help.

 

[AF3]

Thanks Supra, I opened a new thread with a summary of every method I've tried and the results:

http://www.mattersofsize.com/forum/showthread.php?70857-When-Mods-Don-t-Work



Part of me thinks I've got to be doing something wrong in the way I put it on, but I'm really not sure at this point.

I emailed Ron and he also said I could use the canister method with the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] but would probably have to buy a whole new set of rods to attach at sufficient length. Have you used the canister method with the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] before?

 

[DLD]

I say squeeze all blood out of head before and during wrap, the less blood in the head the more comfortable the stretch will be and the more use you will get out of your [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words]. It is also good to look the the [words=http://TLCTugger.com/MOS]VLC[/words] [words=http://TLCTugger.com/MOS]Tugger[/words], it is a great attachment.

 

[AF3]

DLD-- I bought the [words=http://TLCTugger.com/MOS]Tugger[/words]. I can't use it due to my complete lack of foreskin (Ron confirmed this when I emailed him). I'll try squeezing the blood out of the glans. Will your [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words] coming in March be more comfortable than the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words]?

AF

 

[touchmyjunk]

toucHydromaxyjunk,

Can you set us up with a pic of your set up please?

There. I've finally managed to put a picture of my dick on the Internet LOL.

I've been trying to cement in a new length since the weekend. This so far is one hour, full extension at my max [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] stretch of just over 8 bone pressed. It's more comfortable extending while flaccid like this, but I do mix it up a bit and work different directions and various levels of erection.

But the point is that I find silicone tape and one-wrap to work as a solid head attachment wrap and I haven't had any issues at the head end. Still a lot of chafing at the base after an hour.

 

[DLD]

There. I've finally managed to put a picture of my dick on the Internet LOL.

I've been trying to cement in a new length since the weekend. This so far is one hour, full extension at my max [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] stretch of just over 8 bone pressed. It's more comfortable extending while flaccid like this, but I do mix it up a bit and work different directions and various levels of erection.

But the point is that I find silicone tape and one-wrap to work as a solid head attachment wrap and I haven't had any issues at the head end. Still a lot of chafing at the base after an hour.

WTF! Is your glans really that fucking big? Really? I am so jealous, wow it is like a fucking apple! Did you train specifically for this or was it a gift from God?

 

[Jdcsd]

There. I've finally managed to put a picture of my dick on the Internet LOL.

I've been trying to cement in a new length since the weekend. This so far is one hour, full extension at my max [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] stretch of just over 8 bone pressed. It's more comfortable extending while flaccid like this, but I do mix it up a bit and work different directions and various levels of erection.

But the point is that I find silicone tape and one-wrap to work as a solid head attachment wrap and I haven't had any issues at the head end. Still a lot of chafing at the base after an hour.

Looks like you are in there 99% perfect. Just that pinch of skin getting crushed that will retain fluid and look like a deformed blister in an hour. Haha just kidding looks like you know what you are doing.

 

[DLD]

Haha just kidding looks like you know what you are doing.

no doubt!

 

[touchmyjunk]

Looks like you are in there 99% perfect. Just that pinch of skin getting crushed that will retain fluid and look like a deformed blister in an hour. Haha just kidding looks like you know what you are doing.

LOL sometimes I put it on symmetrically and sometimes it's a little crooked. The extra skin I leave is a bit by design because it bunches up against the tape as a soft anchor. It only deforms for about 5 minutes after a two hour session. However I do not stretch right after pump (Bathmate etc) because the pump normally leaves a bit of deformation behind the head and thus it makes wrapping for the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] more difficult.

It's important to have enough width of tape (wider than velcro strap) so that with tension the bunched up tape will be between the velcro and head rim. Originally I used 1" width wrap with 3/4" velcro and this was not enough. Needs about 1-1/2" width on the wrap.

The use of higher than recommended tension I have decided on because I am a hard gainer. I think many would be served with normal spring range tension. It takes a bit of experimenting.

Do not be afraid to drip a little personal lubricant along the edge of the base ring once you are set up. For me this makes a huge difference in comfort. And when you take it off to rest you can just wash off the water based lubricant and start again.

Do try rotary while holding the head, and in combination with base ring lube and cycling the rod tension. i.e. hold the head with cock straight out and swivel in a circle. Gradually you may widen the circle to where you are rotating and touching leg, belly, leg, chair. Add slight tension on the rods and rotate some more. Add base ring lube, and rotary to some music etc. Watch a bit of erotica and experiment with rotary at different erection levels. I am having good progress with using the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] as a dynamic tool.

 

[touchmyjunk]

WTF! Is your glans really that fucking big? Really? I am so jealous, wow it is like a fucking apple! Did you train specifically for this or was it a gift from God?

:blush: DLD you are really encouraging.

Unchained it is a typical proportioned head and a 5-1/4 to 5-1/2 (can't remember) girth shaft. There is distortion while extending because I prefer to wrap with a bit of fluid trapped in the head.

Hey, I've been using your [words=http://www.mattersofsize.com/join-now.html]power assist[/words] as a prep for the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words]. I exclusively use the whole package type of stretches. I like those, as they have given me much more range of motion which presumably means my ligs have stretched.

Really a great time for Penis Enlargement. So many toys!

P.S. If you ever have a word with the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words] manufacturer could you ask for a larger base ring model. Not just for comfort but I think there is really potential to pull in more surrounding tissue, or even a total package extension.

 

[DLD]

:blush: DLD you are really encouraging.
.

More like jealous! Ever since I interviewed all those strippers in Miami I found that what they want most is a huge head! Your head dwarf's mine! Must have a huge brain!

 

[touchmyjunk]

More like jealous! Ever since I interviewed all those strippers in Miami I found that what they want most is a huge head! Your head dwarf's mine! Must have a huge brain!

FWIW if you want bigger head I have an exercise with compression material and theraband.

 

[touchmyjunk]

Sorry couldn't edit my post. Bigger head exercise with compression material and theraband constriction looks like this (attached as d4.jpg).

I haven't done more than a few weeks. I guess I will start back up with it.

I took a lot of pictures of my dick today LOL. Also attached a side view (attached as d3.jpg) of the silicone tape and one-wrap head attachment method I use for the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SG[/words].

 

[ModestGain]

I had this problem with any wrap digging into my head. I just took those small elastic bands with the silicone gel on the inside (that came with the [words=https://www.sizegenetics.com/mos/]16 way [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]comfort system[/words][/words]) and just put it around the base of the head (half on, half off). It stays in place and even if anything gets jammed into it, it tends to stay put, or slide over it. That solved that issue for me completely and I didnt have to go mod shit. lol.

I don't want to use the tuggers frankly because I like being cut (and the ladies love it too).

 

[DLD]

I had this problem with any wrap digging into my head. I just took those small elastic bands with the silicone gel on the inside (that came with the [words=https://www.sizegenetics.com/mos/]16 way [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]comfort system[/words][/words]) and just put it around the base of the head (half on, half off). It stays in place and even if anything gets jammed into it, it tends to stay put, or slide over it. That solved that issue for me completely and I didnt have to go mod shit. lol.

I don't want to use the tuggers frankly because I like being cut (and the ladies love it too).

I am happy you used it! Many men overlook these things in the system. I love the bandaid wraps, or whatever the fuck they are called They are so soft and comfortable The foam ring is shit but it's foam? Nice extra but I wish there was a way to make a more permanent foam, that would last longer. The theraban is also a nice addition when heavy [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words] sessions are done. Lastly, the Velcro-X...probably the simplest change to the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] that was created here on the [words=http://www.mattersofsize.com/join-now.html]Matters of Size[/words] forums We were directly responsible for the [words=https://www.sizegenetics.com/mos/]16 Way [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]comfort system[/words][/words] That and 2 bucks will buy you a coffee but still, we have made some marks in the Penis Enlargement world

 

[blitz88]

I had this problem with any wrap digging into my head. I just took those small elastic bands with the silicone gel on the inside (that came with the [words=https://www.sizegenetics.com/mos/]16 way [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]comfort system[/words][/words]) and just put it around the base of the head (half on, half off). It stays in place and even if anything gets jammed into it, it tends to stay put, or slide over it. That solved that issue for me completely and I didnt have to go mod shit. lol.

I don't want to use the tuggers frankly because I like being cut (and the ladies love it too).

i use the same band thing but put bandages under. I rap my head with 3 or 4 bandages because that band thing slips off sometimes. the bandages stick and add padding. With the band i think i was stretching to much so it would eventually slip out and hurt after a few hours. with the bandages i dont really feel as much pain and can stay in longer. but I go through a lot of bandages tho still...

 

[DLD]

i use the same band thing but put bandages under. I rap my head with 3 or 4 bandages because that band thing slips off sometimes. the bandages stick and add padding. With the band i think i was stretching to much so it would eventually slip out and hurt after a few hours. with the bandages i dont really feel as much pain and can stay in longer. but I go through a lot of bandages tho still...

Are these an "off the shelf" item? I mean, can you buy them in the stores? I though [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]SizeGenetics[/words] created them.