LengthMaster LengthMaster User Instructions and Support Thread…

[jcarrier2017]

Thanks a lot!!

 

[DLD]

Thanks a lot!!

Never a problem my brother that’s why were here!

 

[MegalaDong]

Been using the LengthMaster - Penis Bundle Stretcher & Weight Hanging for a few days now and I can definitely see what all the hype is about! Now it’s just about finding the happy growth spot without pulling my dick off ?. All in all very happy with the purchase and would highly recommend it to anyone looking to step up the stretch! I haven’t been sore like this since my first time hanging.
I am having one issue, the clamping pressure is so uneven that it kills my circulation quick. Is It normal to have a 3/4” difference from front to back on the clamping device? I have a tapered girth but this seems excessive. I have tried adding extra padding in the front to no avail.
When using the Bib hanger I found I got the best clamp while allowing flow at just a slight difference from front to back (like1/16” difference)
Is this normal? Can I move my bolt holes back without voiding my warranty!? (Not a chance ?)

Any help is greatly appreciated!
MD

"Click" the link, to buy at MoS Shop.

 

[DLD]

Been using the Lengthmaster for a few days now and I can definitely see what all the hype is about! Now it’s just about finding the happy growth spot without pulling my dick off ?. All in all very happy with the purchase and would highly recommend it to anyone looking to step up the stretch! I haven’t been sore like this since my first time hanging. View attachment 1821644
I am having one issue, the clamping pressure is so uneven that it kills my circulation quick. Is It normal to have a 3/4” difference from front to back on the clamping device? I have a tapered girth but this seems excessive. I have tried adding extra padding in the front to no avail.
When using the Bib hanger I found I got the best clamp while allowing flow at just a slight difference from front to back (like1/16” difference)
Is this normal? Can I move my bolt holes back without voiding my warranty!? (Not a chance ?)

Any help is greatly appreciated!
MD

This is not a problem most people have so I would suggest trying your modification. I will still respect your warranty and I will put it as a new modification or correction if things work out well. So give it a try and get back to us on how it works. If it’s something that is a great improvement we may include that in the next run of LengthMaster - Penis Bundle Stretcher & Weight Hanging this is not a problem most people have so I would suggest trying your modification. I will still respect your warranty and I will put it as a new modification for correction if things work out well. So give it a try and get back to her son how it works. If it something that is a great improvement we may include that in the next round of LM‘s

"Click" the link, to buy at MoS Shop.

"Click" the link, to buy at MoS Shop.

 

[REDZULU2003]

Remove the hanging attachment from the lengthmaster and hang with it that way, rather then while its attached to the LM.

You can also turn the attachments point around (the piece that grips the penis), so they are placed top to bottom, or if you like, side to side.

"Click" the link, to buy at MoS Shop.

"Click" the link, to buy at MoS Shop.

 

[DLD]

I’m looking forward to seeing what you come up with.

"Click" the link, to buy at MoS Shop.

"Click" the link, to buy at MoS Shop.

 

[MegalaDong]

That’s pretty awesome DLD! I made a couple new holes and it’s working a lot better now. Getting some serious soreness from it. Loving it

"Click" the link, to buy at MoS Shop.

"Click" the link, to buy at MoS Shop.

 

[Mike03016]

I found the exact same challenges you have but I added extra wrapping to the back of my wrap to even out the clamping pressure.

Since this has been a regular topic...
I will ad my wrap, with this wrap and drilling a second set of holes more in the middle of the bundled chamber to move clamping force back a bit... I can pull as hard as I want without any slippage or creep up the glans.

Start with a silicone sleeve a couple inches long and stay about 1/2” behind the glans.

Then using a piece of basic strap ~18-24” long

View attachment 1821080

I wrap the back part of the sleeve, the part closest my body, so it is pronouncely larger then the front by the glans.
View attachment 1821081

Then clamp the bundled chamber, which now will apply more force on the lager area near the body - note, I do squeeze my glans while clamping.

That’s it, pretty basic but works well for me.

View attachment 1821082

"Click" the link, to buy at MoS Shop.

"Click" the link, to buy at MoS Shop.

 

[DLD]

That’s pretty awesome DLD! I made a couple new holes and it’s working a lot better now. Getting some serious soreness from it. Loving it

That’s excellent and I’m gonna tag lightning in this thread so he can get in touch with you and perhaps make this modification for future models. @Lightning

"Click" the link, to buy at MoS Shop.

"Click" the link, to buy at MoS Shop.

 

[Lightning]

This is something I meant to add years ago but forgot due to it not being mentioned often. Get an assorted spacer collection also known as "stand offs" (basically thick washers) to put on the two bolts between the clamps to keep the clamps parallel to each other. This will ensure you get even clamping pressure across the penis shaft.

If you ever bought a wall mount for a flat screen TV, they always come in the package with the bolts so you can space your TV off the mount where needed.

They come in assorted lengths so they will cover everyones girth and you can get a few sizes for under $10 or a larger assortment. You can get short ones and double them up or get and assorted set with different lengths.

Just make sure the inside dimension of the spacer is at least 1/4" or M8 so they slide over the bolts something like these...

Electronics-Salon Plastic Round Spacer Assortment Kit. OD 14mm, ID 8.2mm, L 5 to 25mm, for M8 Screws. Length 5mm 8mm 10mm 12mm 15mm 18mm 20mm 25mm, Plastic ABS Standoff.: Amazon.com: Gateway

Electronics-Salon Plastic Round Spacer Assortment Kit. OD 14mm, ID 8.2mm, L 5 to 25mm, for M8 Screws. Length 5mm 8mm 10mm 12mm 15mm 18mm 20mm 25mm, Plastic ABS Standoff.: Amazon.com: Gateway

www.amazon.com

"Click" the link, to buy at MoS Shop.

"Click" the link, to buy at MoS Shop.

 

[DLD]

This is something I meant to add years ago but forgot due to it not being mentioned often. Get an assorted spacer collection also known as "stand offs" (basically thick washers) to put on the two bolts between the clamps to keep the clamps parallel to each other. This will ensure you get even clamping pressure across the penis shaft.

If you ever bought a wall mount for a flat screen TV, they always come in the package with the bolts so you can space your TV off the mount where needed.

They come in assorted lengths so they will cover everyones girth and you can get a few sizes for under $10 or a larger assortment. You can get short ones and double them up or get and assorted set with different lengths.

Just make sure the inside dimension of the spacer is at least 1/4" or M8 so they slide over the bolts something like these...

View attachment 1821673View attachment 1821674View attachment 1821675View attachment 1821676

Electronics-Salon Plastic Round Spacer Assortment Kit. OD 14mm, ID 8.2mm, L 5 to 25mm, for M8 Screws. Length 5mm 8mm 10mm 12mm 15mm 18mm 20mm 25mm, Plastic ABS Standoff.: Amazon.com: Gateway

Electronics-Salon Plastic Round Spacer Assortment Kit. OD 14mm, ID 8.2mm, L 5 to 25mm, for M8 Screws. Length 5mm 8mm 10mm 12mm 15mm 18mm 20mm 25mm, Plastic ABS Standoff.: Amazon.com: Gateway

www.amazon.com

Maybe something we can add to the package?

"Click" the link, to buy at MoS Shop.

"Click" the link, to buy at MoS Shop.

 

[REDZULU2003]

Hope so

"Click" the link, to buy at MoS Shop.

"Click" the link, to buy at MoS Shop.

 

[DLD]

Maybe something we can add to the package?

@Lightning

"Click" the link, to buy at MoS Shop.

"Click" the link, to buy at MoS Shop.

 

[lano1106]

I did read somewhere else that silisleeves were now included with the LengthMaster. Is it really the case? If so then the OP needs to be edited to add the new items found in the box...

"Click" the link, to buy at MoS Shop.

"Click" the link, to buy at MoS Shop.

 

[DLD]

I did read somewhere else that silisleeves were now included with the LengthMaster. Is it really the case? If so then the OP needs to be edited to add the new items found in the box...

Yes they are ?

"Click" the link, to buy at MoS Shop.

"Click" the link, to buy at MoS Shop.

 

[lano1106]

Yes they are ?

thx... I'm waiting my unit any moment now...

"Click" the link, to buy at MoS Shop.

"Click" the link, to buy at MoS Shop.

 

[lano1106]

As expected, I did receive my LM today!
however, there was no silisleeves with it...

"Click" the link, to buy at MoS Shop.

"Click" the link, to buy at MoS Shop.

 

[REDZULU2003]

As expected, I did receive my LM today!
however, there was no silisleeves with it...

Too bad, send lightning a PM, they'll be in the post first thing.

"Click" the link, to buy at MoS Shop.

"Click" the link, to buy at MoS Shop.

 

[DLD]

Too bad, send lightning a PM, they'll be in the post first thing.

Yeah I thought we are shipping sleeves with the Lengthmaster have no idea where that slip to the cracks.

"Click" the link, to buy at MoS Shop.

"Click" the link, to buy at MoS Shop.

 

[longstretch]

Been using the Lengthmaster for a few days now and I can definitely see what all the hype is about! Now it’s just about finding the happy growth spot without pulling my dick off ?. All in all very happy with the purchase and would highly recommend it to anyone looking to step up the stretch! I haven’t been sore like this since my first time hanging. View attachment 1821644
I am having one issue, the clamping pressure is so uneven that it kills my circulation quick. Is It normal to have a 3/4” difference from front to back on the clamping device? I have a tapered girth but this seems excessive. I have tried adding extra padding in the front to no avail.
When using the Bib hanger I found I got the best clamp while allowing flow at just a slight difference from front to back (like1/16” difference)
Is this normal? Can I move my bolt holes back without voiding my warranty!? (Not a chance ?)

Any help is greatly appreciated!
MD

I literally just posted about this. Did you try the modification because I'm thinking of doing the same.

"Click" the link, to buy at MoS Shop.

"Click" the link, to buy at MoS Shop.