I've had the stealth for a few weeks. Since dld asked for the link in another thread I think I'm safe posting a review now. I'm not paid in any way by this company.

http://www.stealthformen.com/homepage

Its kinda like the stretchy material on the back of knee pads or football pads or joint supports youd buy at the pharma next to [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace[/words] wrap... Not exactly comfortable material at times on sensative penis skin, but workable. I go hours in it, overnight especially but it can become irritating and off it comes.

Handwash in sink. Let it dry somehow. I hooked it up on a clothes hanger on shower bar.

Measuring is important. You pull your penis out like bpfsl measuring, but tape the flacid girth measurement of that stretched penis. I bought two, one exactly that size and one just fatter... thinking if I grow fg Ill need a fatter one. Well, I've grown eg 1/3" but yet to see reliable + fg .. and I need a bit longer tube stealth. So next buy would be next length up of the same girth...?

The dudes customer service was awesome. I had to email them 911 to fix the shipping address... late on Sunday afternoon. He replied about 2 hours later and we traded 3x2 emails in all. Pretty cool service.

The one trouble I have with this is, my balls like to pop out of the big ballsack loop, and its itchy along that loop around my package.

2nd issue is, I can't wear my Ring of Power along with this stealth. I'm looking at, how can I sew a little pockets on for the metal bars of RoP? Then I'd have everything. (I think the [words=http://www.mattersofsize.com/join-now.html]Mos[/words] product has this covered) I think the metal bars positioned right would help hold the balls in place too.

Its super easy to put on. Just put your fingers thru the big loop and grab your package, flip/slide it off your fingers and onto body. Then I put 3 fingers thru penis tube and widen them. I push glans up from underneath and grab with those 3 fingers. I pull penis through top. Adjust a bit and done. 5 seconds maybe?

Easy to use and seems to work too. I haven't measured [words=http://fleshlight.sjv.io/c/348327/302851/4702]fl[/words] yet but its longer when I take off the stealth, for sure.

I think this is worth the money if you hit the right girth & length first time. I'm debating buying +1 longer only because I suspect I will be using the [words=http://www.mattersofsize.com/join-now.html]Mos[/words] [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ads[/words] and cockring product soon enough to just make what I have work. Otherwise I'd buy the next length stealth x2 and swap on wash days.

Added:
Thanks for jogging my brain, d4days...

The shipping 2 weeks is pretty solid 2 weeks. It comes from China where they're sewn, maybe to order? So mine was right on 2 weeks. Forgot that completely. Ill add it to my OP. Sorry.
 
Last edited:
Hey,

thx a lot! kinda happy that I didn´t buy it yet. My unit has kinda sensitive skin so that´s a problem, I already have problems with the xleeve system at night (soft version). If you find a good way around that somehow I´d appreciate it since I kinda like the idea of the stealth.
 
Well, if you put some sort of silk (or maybe other) cloth around your penis before putting on the stealth, I think you can overcome this issue. This really looks nice, the review is nice and It really got me into this. I will just have to get more info on the other [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words], but this one looks good. I think on combining it with the circle weight [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words] for even better result :)
 
I ordered on 8/21, still have not received them. I had to email them about a week after I ordered to ask for the tracking information that was supposed to be emailed to me within two days. I got a reply saying that "the girls in China were on vacation for a week so the order shipped out yesterday." That was on 8/26. When I tracked the package, it wasn't shipped until 9/1. Overall, I have not been impressed, I hope the product is better than the service, I'll add my two cents when they arrive.
 
Thanks for jogging my brain, d4days...

The shipping 2 weeks is pretty solid 2 weeks. It comes from China where they're sewn, maybe to order? So mine was right on 2 weeks. Forgot that completely. Ill add it to my OP. Sorry.
 
Saw this and ordered it but never got it. After I got some reviews that it does not work too well. I am still curious for my own experience, maybe I will send one more email for review.
 
doublelongdaddy;562036 said:
Saw this and ordered it but never got it. After I got some reviews that it does not work too well. I am still curious for my own experience, maybe I will send one more email for review.

By the way DLD, when is the [words=http://www.mattersofsize.com/join-now.html]MOS[/words] [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words] supposed to come out? I am very interested! :)
 
doublelongdaddy;562036 said:
Saw this and ordered it but never got it. After I got some reviews that it does not work too well. I am still curious for my own experience, maybe I will send one more email for review.



Oh I'm sure you caused a stir at the little seamstress factory, Dld. Frst they have to write the guy 3 times confirming the measurements... All the little Chinese ladies... thinking some guys confused about ordering a knee brace. They each try it on their arm... might take a while for them to get this order finished what with all the 1/2 hour bathroom visits...

Mine took a good 2 weeks.
 
LoveHerDeeply;562327 said:
Oh I'm sure you caused a stir at the little seamstress factory, Dld. Frst they have to write the guy 3 times confirming the measurements... All the little Chinese ladies... thinking some guys confused about ordering a knee brace. They each try it on their arm... might take a while for them to get this order finished what with all the 1/2 hour bathroom visits...

Mine took a good 2 weeks.


You have no idea how funny this post is! rofl rofl rofl rofl
 
Zambrodom3;562090 said:
By the way DLD, when is the [words=http://www.mattersofsize.com/join-now.html]MOS[/words] [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words] supposed to come out? I am very interested! :)

One Month!
 
i think im going to order one of these . Ibve been looking for a anti turtiling solution i can wear for long periods as well as over nights
 
Mine finally arrived, about 3 weeks after ordering. It is comfortable and could be worn all day, I like the ball cuff to prevent shrinkage. The problem I have is it's way too short. When I put my size in to get the recommendation, I ordered the one it recommended, but they make them short. Pay close attention, when you put in your size, the picture below of the device changes to show you the actual dimensions that you'll get and they are about an inch short of the length you put in, I think to accommodate some shrinkage. If you put in 6.5 inches flaccid, the picture shows the recommended device/size below and it has a length measurement on there that shows the device at around 5.5 inches. I wanted this thing to push my max flaccid or at least keep it maximized. I don't think I'll re-order the right size and I'm sure I won't be able to return them, maybe one day I'll get around to it, lesson learned.
 
Well you are supposed to be measuring from behind the glans to base of nbpfsl... so yeah, off measures on yours.

I just took mine off after a 3 day endurance test. Only took it off for shower. After I washed it recently with tide with softener in it... its a lot softer feeling. May have made the difference. So 3 days, I guess that's pretty good huh? Easily can fo [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words] [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]UJS[/words] replacement as part of [words=http://www.mattersofsize.com/forum/showthread.php?64036-My-Best-Work-Ever-Penis-Enlargement-will-Be-Changed-Forever-gt-gt-Gain%20inches%20with%20SRT-Theory-and-Routine]SRT[/words] for extended healing.

Only problem is, no ROP for 3 days... so Ima put that on and wash my stealth.
 
Isn't is just better to put in 10 inches flaccid and when it arrives, just cut it wherever you think is the best. You choose your own size instead of having someone who has no idea what you want and how your penis looks like. Plus, in these 3 weeks, you could have grown rofl .
 
No. One of the design features that make this work is a little silicon ring at the glans end. It helps prevent the head from turtling, from popping inside the fabric tube of the device. Can't cut to length. Have to give good measure as they instruct. I hit it right first time... but 2nd one I asked for was longer and githier... still isnt right for my post pumping [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]Ads[/words] plans...

Well maybe it is just too firm still. Maybe I wash it it might relax that little bit I can start using it as planned, for post-pumping session [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ads[/words] fitting my girthier unit.


Oh that a part of true review... Handwash only. They say there's magnetic elements impregnating the fabric... so no machine washy. I dunno 'bout alla that.
 
Last edited:
LoveHerDeeply;563545 said:
Well you are supposed to be measuring from behind the glans to base of nbpfsl... so yeah, off measures on yours.

I just took mine off after a 3 day endurance test. Only took it off for shower. After I washed it recently with tide with softener in it... its a lot softer feeling. May have made the difference. So 3 days, I guess that's pretty good huh? Easily can fo [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words] [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]UJS[/words] replacement as part of [words=http://www.mattersofsize.com/forum/showthread.php?64036-My-Best-Work-Ever-Penis-Enlargement-will-Be-Changed-Forever-gt-gt-Gain%20inches%20with%20SRT-Theory-and-Routine]SRT[/words] for extended healing.

Only problem is, no ROP for 3 days... so Ima put that on and wash my stealth.

LHD, I measured like you said, the problem is the size they recommend when you enter your measurement is and inch short. When you enter your size, the picture below updates and shows the size you'll get if you go with their recommended size, check out the screenshot below.
View attachment 27732
How did yours come out right? Did you not order the recommended size? Thanks LHD.
 
Wow D4d. Great post of screeny. My cellie diddnt show that bottom left part with the product... or I forget it now?


I'd write them an email and ask for customer service. Doesn't add up. This was your nbpfl flaccid stretch length, right?


I nailed mine somehow.
 
LHD, that isn't the one I ordered (I just pulled it up to show it), but yes, I put in my nbpfsl and ordered the one they recommended without paying much attention to the picture below it I guess. I just assumed the device was made to match the exact measurement I put in, I wonder if their program is messed up somehow now. I checked both of the devices that came and they are identical and both about an inch short. I'll email them and see what's going on, I'll keep everyone posted
 
So you tried it on and its not holding your length out there? Hmmm. I'm gonna have to look at my numbers on mine again. Maybe I missed something. Seems to be a good length on me when accounting for the gap for ball strap area...
 
LHD, I have about an inch that's uncovered by the device so it's not really doing it's job. The length shown on the sizing chart goes from the ball strap area to the tip. Just a thought, did you measure your length to the edge of the glans like the instructions say? If not, maybe that's where you got the extra length on yours that ended up working.
 
I emailed Bruce and this is his explanation:

"The stealth is not designed to extend the penis to the fully stretched length. The fabric will buckle under the stress and the penis slips back inside. Urination also becomes a problem with pain and leakage. The Sizing calculator is set up for a grower who is retracts excessively and showe-ers with a decent hang are instructed to upsize to get full coverage of the shaft.

We can have the resizing discount invoice sent which gives a deal... two for the price of one! Pay 15 + 7 s/h
for a total of $22 and we ship two Stealths of your choice. I will also include the new Stealth jacket which is worn over top of the Stealth regular... first customer. It works great to reinforce the sheath for a firmer extension.

Let me know if you want the discount invoice to be sent!

Bruce
Stealth for Men"

I might take him up on it, I just don't like the shipping time. He does seem nice and service oriented though.
 
Well, get started today is faster than thinking about it for a week then starting, LOL.

I totally get his explanation. A show-er wouldn't need this really. My grower status has been well documented from my earliest [words=http://www.mattersofsize.com/join-now.html]Mos[/words] posts.

Alternative tools like absilicons tube are even more constrictive but that also makes them hard to get on... I get it now.

So I imagine if I stretch hard for nbpfsl with it on ill be seeing a gap uncovered, yeah.
 
As the vendor of Stealth... I hope I am welcome at [words=http://www.mattersofsize.com/join-now.html]MOS[/words] to provide support to Stealth users that post here.

Stealth is first and foremost designed as an anti-turtle device (with FIR/NI healthy function treatment) hence the shorter length of the garment in relation to the fully stretched flaccid length. If your goal is for active stretching then one of the spring loaded stretching devices would be better suited.

The idea behind this is that you can wear Stealth conveniently and in comfort 24/7 with no comprise in your ability to urinate or sleep through morning wood.

Some discomfort can be there initially due to the sensitive nature of the frenulum but with time this disappears.

Regarding shipping... yes it takes about 2 weeks and to this end we just switched our provider from Hong Kong Post to Singapore Post for faster and more consistent delivery times. Sucks to deal with not having delivery in 2-3 days but this is the best we can do at the moment.

As already mentioned we are service oriented and do our best to satisfy our clients.

Again.. I trust I am welcome here if only to answer questions and clear up any issues a user may be having with the product.

StealtHydromaxan
 
Last edited:
Danboy;564315 said:
As the vendor of Stealth... I hope I am welcome at [words=http://www.mattersofsize.com/join-now.html]MOS[/words] to provide support to Stealth users that post here.

Stealth is first and foremost designed as an anti-turtle device (with FIR/NI healthy function treatment) hence the shorter length of the garment in relation to the fully stretched flaccid length. If your goal is for active stretching then one of the spring loaded stretching devices would be better suited.

The idea behind this is that you can wear Stealth conveniently and in comfort 24/7 with no comprise in your ability to urinate or sleep through morning wood.

Some discomfort can be there initially due to the sensitive nature of the frenulum but with time this disappears.

Regarding shipping... yes it takes about 2 weeks and to this end we just switched our provider from Hong Kong Post to Singapore Post for faster and more consistent delivery times. Sucks to deal with not having delivery in 2-3 days but this is the best we can do at the moment.

As already mentioned we are service oriented and do our best to satisfy our clients.

Again.. I trust I am welcome here if only to answer questions and clear up any issues a user may be having with the product.

StealtHydromaxan


Welcome you are, yes! I've been hearing lots of stuff about your product and the only negative things are:
1- the slow delivery (which you said you have already fixed if I am not wrong)
2- the shorter sleeves you send. There was a user here (don't remember who he was, maybe jakb or AndroidR) that said that once he told you his size he expected to get the size he filled in ( the length from the extreme base till before the glans) and you gave him 1 inch shorter.

So, did you really fix your delivery time and why is that you give shorter stealths than people fill in for the order? Other than this- I have heard only good stuff about it. Loveherdeeply, as a user might have some questions and feedback he can give for this product, as much as I remember he really likes the product and he said that the only negativity is that it took him 2 weeks for the delivery. :) I would love to see you more around the forum, StealtHydromaxan!!! Keep us in touch with your product and post around the forum more giving more info about it. (From a potential buyer of the stealth sleeve ) Zam! :)
 
LoveHerDeeply;563846 said:
Alternative tools like absilicons tube are even more constrictive but that also makes them hard to get on... I get it now.

So is this abs. tube something like the xsleeve or not? I am not sure whether it's stretchable since it's a tube. Give me a link to see this product please :)
 
Zamb, yes absilicons tubes are much like xsleeves silicon tubes... very similar.


Dan/StealtHydromaxan. Yeah I get your explanation perfectly.

I understand from D4days and your post theres an add on product to make it a bit more tight and hold longer extension? Sounds interesting.

Now that my penis is used to the fabric and I've handwashed it properly a few times and its softened up... I can go 3 days, with shower and Penis Enlargement breaks of course... yeah the penis skin getting used to it is probably the biggest factor. I'm persistent, or stubborn LOL. I was determined to give it a go and try to get my moneys worth out of it. I sure have now!

I also just realized I've never really checked out my penis for a difference in turtling now that I've worn it a while...
 
Thanks Zam,

We have since two days shifted from Hong Kong Post which had become a problem for consistency.. they were sometimes 9 days flat for a delivery and others times 3 weeks. Singapore Post looks more promising and so we just started using their services a few days ago. Need to see some deliveries before knowing how they actually perform. We will be having a distribution point in the US to speed things up in the future, for sure.

The sizing procedure is set up to eliminate as many variables as possible but due to the nature of the highly dynamic size fluctuations of the flaccid penis and equally problematic the often distorted perceptual interpretations a subject imposes on his own measurements... these two factors can lead to a hit or miss affair. Keep in mind there is a very even percentage of guys who report the Stealth as being oversized as under. Most get it right but Penis Enlargement guys tend to bring a lot of their own ideas/agendas which can play havoc too... better to experiment and push boundaries later after you establish a solid baseline.

The Stealth sizer is set up for the grower by default with an upsize option for the shower who with the same stretched measurement often hangs considerably longer in the flaccid state.... again upsize for the showers. Sometimes a measurement data point will be a borderline entry in which the user could go either way depending for the most part on the dynamics of his anatomy and intuition.

Another factor that is difficult to communicate is the level of tension to use on the measuring tape for girth. Only enough should be used to take up the loose skin so that you are in fact lightly measuring the firm underlying tissue of the penis itself... a lot of variation in size can be eliminated here when done correctly for getting an accurate data point. Same with the fat pad... only slight pressure amounting to no more than 1/2 inch of depression is the standard recommendation for a good fit.

My suggestion is to stick to the basic instructions with clarity of mind, upsize if a shower and select two different sizes if you are just not sure with a borderline entry. Once you get the Stealth and actually try it on you will be in a position to know clearly where you are at with it. At least 60% of the guys get it right and the balance split the difference... over or under.

So its literally in your hands.. so to speak.

In closing, you need some patience with delivery which is 100% guaranteed from our side (no questions) and try not to over think the measuring process and just simply follow the instructions . Practice it a few times and then do it one last time straight up in a clinical manner... finished.

Once you actually try it out you will be in a better position to optimize your fit if need be and we have the 2 for 1 discount to make it easier on the budget.

Hope that helps.

StealtHydromaxan

Zambrodom3;564324 said:
Welcome you are, yes! I've been hearing lots of stuff about your product and the only negative things are:
1- the slow delivery (which you said you have already fixed if I am not wrong)
2- the shorter sleeves you send. There was a user here (don't remember who he was, maybe jakb or AndroidR) that said that once he told you his size he expected to get the size he filled in ( the length from the extreme base till before the glans) and you gave him 1 inch shorter.

So, did you really fix your delivery time and why is that you give shorter stealths than people fill in for the order? Other than this- I have heard only good stuff about it. Loveherdeeply, as a user might have some questions and feedback he can give for this product, as much as I remember he really likes the product and he said that the only negativity is that it took him 2 weeks for the delivery. :) I would love to see you more around the forum, StealtHydromaxan!!! Keep us in touch with your product and post around the forum more giving more info about it. (From a potential buyer of the stealth sleeve ) Zam! :)
 
Remember the instructions are clearly stated not to be bone pressed, but rather lightly pressed 1/2" into the fat pad only. The sizer maxes out at G for just under 6" shaft measurement from fat pad to beginning of the glans. When an order comes in at a higher size this is dealt with as a custom request and made to size with a personal one on one fitting to be sure of the size required. We get very few who come in over the G size... although there was one today.

biggerthanu;564505 said:
Has anyone noticed that the longest available length is 5.9"? So if your 8" from bp to glans you are going to be shy 2+" ???
 
Dan, thank you for the clarification on the sizing and your dedication to improving shipping times. I want to clarify that I was not knocking you or your product, just trying to keep the members here informed and I think your explanations are excellent and your reasoning sound. Anyone who reads through this thread should be able to order exactly what they intend, keep up the good work and welcome to the forum!
 
No problem mate... i understand and appreciate the accountability a vendor must have to serve clients effectively.

cheers!
 
i've never tried the stealth [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ads[/words], but it looks decent. although to be honest I think the [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]Ace[/words] wrap seems better because of the ability to modify the compression and also wrap the entire shaft.
 
Back
Top