Progress thread Big Schwanz Acht vs. inertia...or a 'how to' for the lazy guy to get

Big Schwanz Acht said:
I've been on The DL for the last few days, (too much walking exacerbated by too much pumping has caused sensitivity/itching/discharge where my scrotum meets my thigh). I'm hoping this clears-up soon cuz I have a 'field-trip' scheduled for tomorrow
Click to expand...


Hydrocortisone Will definitely help you with this, it will do his thing within 24 hours. Try some and see how quickly this heals up and then you can use it as a presented his preventative practice.
 
did 1/2 of my normal 45 minute pumping/stretching/squeezing routine yesterday...no issues :) I'll maintain a pragmatic (word of the week, lol) approach for the next few days, I don't want this to happen again
 
Big Schwanz Acht said:
did 1/2 of my normal 45 minute pumping/stretching/squeezing routine yesterday...no issues :) I'll maintain a pragmatic (word of the week, LOL) approach for the next few days, I don't want this to happen again
Click to expand...

You like that word don’t you? ?
 
...well the irritation returned and lucky for me, added a dose of hemorrhoids (who knew that these 'leak' fluid). I'm hoping they go away soon cuz my water bill is going to be astronomical with 3-5 showers a day and multiple loads of laundry. I'm effin' grossing myself out w/myself
 
Sorry to hear that, man. Have you talked to your doctor about your PE and how it might be interacting with these issues you're having? Focus on healing first and you can always get aggressive with your PE again after that!
 
antibiotics are my friend right now...today is better than yesterday...hoping tomorrow shows improvement. at least the 'anal leakage' has subsided (that was disgusting)
 
Everyone's butt makes gross shit every day. It's to keep humans from getting arrogant about themselves. ;)

Glad you're on the up and up!

EDIT: Although, if you could not use the term 'anal leakage' again, that would be okay. I get it, you're a wordsmith. Now use your powers for GOOD. :D
 
...on a positive note, the embarrassing fluid secretions have ended(I'm 99.999% certain I was the only person aware of it) and I was able to complete a '3/4 session', yea :) I could be mistaken, but the two-week lay-off may have opened the door for a quick boost in length (I'll confirm after today's routine)...but if it's true (and my eyes aren't lying to me) this might be something to explore
 
Big Schwanz Acht said:
I've had a good/solid week of my Bathmate routine with no issues, (although I ramped-up the intensity gradually). So it seems I'm 100% healed!
I did notice my 'hang' was particularly impressive, so I grabbed my tape-measure and was just a shade over 7" bone-pressed flaccid...looked mean :)
Click to expand...

That’s great news I’m so happy for you my brother! A 7 inch flaccid it’s pretty mean looking, shit a 7 inch hard dick is impressive!
 
I'll be heading out-of-town for this long weekend (but not before I get a solid routine completed)...there will be plenty of opportunities to see if she can feel any 'difference'. That's the best part of PE for me...when she says, 'ooooh, that's big' or grabs it and says 'how are you able to get that thing inside of me?' pure gold
 
Big Schwanz Acht said:
I'll be heading out-of-town for this long weekend (but not before I get a solid routine completed)...there will be plenty of opportunities to see if she can feel any 'difference'. That's the best part of PE for me...when she says, 'ooooh, that's big' or grabs it and says 'how are you able to get that thing inside of me?' pure gold
Click to expand...

Have a fun and safe trip my brother and really enjoy yourself. God bless!
 
Prior to heading out of town, I squeezed-in a BM routine (which keeps me 'pumped-up' for several hours after), and when I arrived at my GF's house, she surprised me by wanting to fool-around. This was the 1st time in 5 years that she's done this and it was early-afternoon, to boot! Fortunately it took at least 10 minutes (and her initial orgasm) until I was 90-95% EQ, so the size-difference wasn't that dramatic...but I was still a bit concerned that I was packing a 'false' size. After her second or third orgasm, all worries evaporated and I was mentally freed-up to fully enjoy her...but those first few moments were kind of stressful in an odd way.
Has anyone else experienced the feeling of having sex post-routine as being deceitful?
 
Big Schwanz Acht said:
Prior to heading out of town, I squeezed-in a BM routine (which keeps me 'pumped-up' for several hours after), and when I arrived at my GF's house, she surprised me by wanting to fool-around. This was the 1st time in 5 years that she's done this and it was early-afternoon, to boot! Fortunately it took at least 10 minutes (and her initial orgasm) until I was 90-95% EQ, so the size-difference wasn't that dramatic...but I was still a bit concerned that I was packing a 'false' size. After her second or third orgasm, all worries evaporated and I was mentally freed-up to fully enjoy her...but those first few moments were kind of stressful in an odd way.
Has anyone else experienced the feeling of having sex post-routine as being deceitful?
Click to expand...

Not at all! It is the future showing itself early, no deceit it is the future showing itself early, no deceit in that.
 
I posted a question in the MityVac thread, but thought I'd explore my rationale a bit more deeply in my progress thread.
Along with overall size, I'd also like to maintain symmetry...my height fits my weight (gotta work on that one, at 6'1" and 225#, dropping 20# would certainly help), and at 8" BPEL and 7" MSEG things just look...well, fat. Bringing my length to 9" would certainly create the 'look' (I've played-around with the online size simulator) I'm shooting for.
The 2.25" MityVac cylinder references a girth between 6 1/2"-6 3/4", so my thought would be to squeeze-into this size thereby focusing all the pumping-forces upward. My worry would be too much constriction damaging myself, (but since I've been 'full-package' pumping in my modded X40 things get packed-in there pretty tight), and my other fear is getting 'stuck', (this happened once in that German pump I was testing and it literally took me 10 minutes to extricate my d!ck from that dang plastic/accordion tube...and I have not used it since #PTSD)
My thought would be to use the same lubricant (a higher viscous hair conditioner) and do a combo H2O in my morning shower and air while relaxing in the evening.
Any thoughts/suggestions/warnings?
 
Hey @Big Schwanz Acht ! I don't know if I replied in the other thread, but apologies for being late to this party.

Considering you've done full package pumping with the modded X40, the 2.25" could be really apt for just pumping for your penis.

Getting stuck in that German pump is more due to the materials of it. I wouldn't see it as a big problem with Mityvac, especially if you use some lube. That hair conditioner can work quite well, other thing would a hybrid silicone/water lubricant. There are several good lubricants out there.

Just a PSA to all Brothers, having a good lubricant available for yourself and your partner is good healthcare. ;)
Many lubes out there can throw vaginal bacterial balance out of whack.
(Glycerin, in many lubes, it's sugar, hello yeast infection :P)

Dropping the weight helps a lot, I'm on the way to descend myself but it's tough work.
May you reach your goals but be very happy about what you have already!
 
Wow BSA, Consistency is the biggest virtue in PE! You are proof of that!

Could you give me advice on the X40 and girth?
I basically aim to increase only my base. What do you think at what base girth the X40 is too small?(I sure want to avoid "gator bite")
Right now I'm at 5.7 inches base but after some clamping I might enter with 6 inches into the water pump..
I fear the X50 is too big but the X40 too small seeing that you fill it completely girth wise.

Big Schwanz Acht said:
if I were to purchase a cylinder that's slightly less than my mseg, wouldn't that impart all the pumping-forces along the length?
Click to expand...
It might not exert the force -along- the whole length. It might merely pull on the top portion of your shaft with the lower parts being trapped to the sides of the pump getting no vacuum pull.

You might consider using a tight sleeve restricting you from expanding girth wise. Giving space all around allowing the vacuum to pull along the whole length.

I dabbled a bit into using bicycle inner tubes in a pump(you might need motorbike sized tubes though ;) ).

These tubes are tough. They totally restrict girth expansion. Finding the right size is hard and I had to pump the tube up overnight to stretch it. A rather tough silicone might do it too.
 
  • Like
Reactions: DLD
dickerschwanz said:
Wow BSA, Consistency is the biggest virtue in PE! You are proof of that!

Could you give me advice on the X40 and girth?
I basically aim to increase only my base. What do you think at what base girth the X40 is too small?(I sure want to avoid "gator bite")
Right now I'm at 5.7 inches base but after some clamping I might enter with 6 inches into the water pump..
I fear the X50 is too big but the X40 too small seeing that you fill it completely girth wise.
Click to expand...

The X40 can accommodate the 'whole package', so I'd guess at least 7 1/2" of girth (perhaps more), so if you're aiming for 6"-7" of base, The X40 (modded w/The VacuVin) would be ideal. The X50 (Goliath) is truly a 'beast' that might be over-kill.
 
I did have another adventure north of the border yesterday and, although it's always a good time, I think it's starting to lose its 'excitement value'...perhaps it's similar to adult entertainment in the fact that you always have to 'ramp-it-up' to achieve the same pleasure.
 
  • Like
Reactions: DLD
Big Schwanz Acht said:
I did have another adventure north of the border yesterday and, although it's always a good time, I think it's starting to lose its 'excitement value'...perhaps it's similar to adult entertainment in the fact that you always have to 'ramp-it-up' to achieve the same pleasure.
Click to expand...

Maybe you need more girth and length.
 
Big Schwanz Acht said:
LOL, I wasn't able to get it all in her...so maybe that's the cause of my dissatisfaction
Click to expand...

Oh, well I think you are correct
giphy.gif
 
  • Like
Reactions: DLD
Big Schwanz Acht said:
Don't get me wrong, it's amazing watching a girl trying to wrestle getting it in...lots of lube and patience :) Knowing that's the biggest she's ever had is definitely a major mental turn-on.
Click to expand...

I can imagine my friend!
 
Just a quick update...my brand-new MityVac arrived today And I took it out on its Maiden Voyage! At first blush, I must say the entire packaging and presentation is top notch...I like the case and how well everything is wrapped.
Since my primary objective is to get to 9" BPEL, I opted for the 2" cylinder which ended-up being perfect for my goals. My entire shaft felt 'compressed' and as I increased pressure (nice little gauge on the hand-pump, btw), I could feel 90%+ of the forces along the length. I started at 5hg and increased to 10hg for the majority of the 45 minute session. Minimal FR and a definite longer 'hang' once I exited...very comfortable (I used copious amounts of virgin coconut oil) very easy to set-up, even easier to use. I can see this replacing my BM almost immediately, (and my water bill can get back to 'normal', lol). Here's a pic where I tried to capture the gauge and cylinder:View attachment 1823089
 
Hooray I’m so happy for you my brother! I’m also happy to see you because you haven’t been around in a while. Please when you get a chance leave your review in the store, your name holds so much value.
 
I'm really impressed by The MityVac...super easy set-up, I can infinitely vary the pressure, and getting the 2" cylinder seems to be working-out well. I'll get a few more pics up once I see some appreciable results...as a side-note, I still use my BM in the shower, but not nearly the duration I used to. Anyway, great product!
 
Big Schwanz Acht said:
I'm really impressed by The MityVac...super easy set-up, I can infinitely vary the pressure, and getting the 2" cylinder seems to be working-out well. I'll get a few more pics up once I see some appreciable results...as a side-note, I still use my BM in the shower, but not nearly the duration I used to. Anyway, great product!
Click to expand...

You are not pumping with a sleeve? I thought the mityvac cannot be used without the sleeve.
 
huge-girth said:
You are not pumping with a sleeve? I thought the mityvac cannot be used without the sleeve.
Click to expand...
Since I'm experimenting with 'compression pumping', I'm essentially using the cylinder as my 'sleeve'...I sized it about 1/4" to 1/8" smaller than my MSEG in an attempt to focus all the pressure-forces along the length axis. So far I feel like the majority of the 'pump' is working length, but we'll see...
 
Big Schwanz Acht said:
Since I'm experimenting with 'compression pumping', I'm essentially using the cylinder as my 'sleeve'...I sized it about 1/4" to 1/8" smaller than my MSEG in an attempt to focus all the pressure-forces along the length axis. So far I feel like the majority of the 'pump' is working length, but we'll see...
Click to expand...

Compression? What is this now?
 
DLD said:
Compression? What is this now?
Click to expand...
so my ultimate goal is to get to that elusive 9"X7" and I'm about 3/4" short. In sizing the MityVac cylinder, I decided to experiment with a slightly narrower diameter than what my max-girth is currently, thereby (in theory) forcing all the pumping energy along my length since this is the 'path of least resistance'. We'll see in a few months if this warrants its own tutorial, but so far so good (it's only been a week, lol)
 
Big Schwanz Acht said:
so my ultimate goal is to get to that elusive 9"X7" and I'm about 3/4" short. In sizing the MityVac cylinder, I decided to experiment with a slightly narrower diameter than what my max-girth is currently, thereby (in theory) forcing all the pumping energy along my length since this is the 'path of least resistance'. We'll see in a few months if this warrants its own tutorial, but so far so good (it's only been a week, LOL)
Click to expand...

That’s hot! I hope there’s awesome rewards and this from you. I’m also glad to see you back on the boards, I was worried for a second.
 
It's been a couple weeks since delivery of The MityVac and I've adopted a 2X's per day. 30-40 minutes of actual pump-time per session which adds-up to an hour to an hour and a half under pressure. I'm using the ruler on the cylinder as my gauge and have not seen anything noteworthy, but I reach my max of 21cm almost immediately (less than 2 minutes) which I'm considering as progress. It's only been 2 weeks, so I'll remain patient...but this pump suits my lifestyle: easy set-up, easy to use, easy to clean, easy to store. I also like going commando and using the cylinder itself as a sleeve to prevent any FR (after a session I have minimal fluid just at my circumcision scar). I also use my BM in the shower, but only for 5-10 minutes...essentially for girth maintenance
 
Big Schwanz Acht said:
It's been a couple weeks since delivery of The MityVac and I've adopted a 2X's per day. 30-40 minutes of actual pump-time per session which adds-up to an hour to an hour and a half under pressure. I'm using the ruler on the cylinder as my gauge and have not seen anything noteworthy, but I reach my max of 21cm almost immediately (less than 2 minutes) which I'm considering as progress. It's only been 2 weeks, so I'll remain patient...but this pump suits my lifestyle: easy set-up, easy to use, easy to clean, easy to store. I also like going commando and using the cylinder itself as a sleeve to prevent any FR (after a session I have minimal fluid just at my circumcision scar). I also use my BM in the shower, but only for 5-10 minutes...essentially for girth maintenance
Click to expand...

How would you compare it to the Bathmate? Pros and cons?
 
The MityVac beats-out The Bathmate in all categories...convenience being the most important. I can lie in bed before falling asleep and get 30-40 minutes of PE, (I've even toyed with the idea of sleeping with it on at a very low HG). I still use my BM, but since it's a 'shower-only', I only have it on for maybe 10 minutes now. Being able to infinitely size the cylinder is also a major 'win', since you can fine-tune your area of focus...I'm strictly pumping for length so the cylinder being equal (or slightly narrower) than my MSEG also eliminates almost 100% of any Fluid Retention (the bane of my Bathmate). I also like the ability to vary the pressure during any given session. It's only been a couple of weeks, but I can see this product being the ultimate 'Plateau Buster' for me
 
You must log in or register to reply here.
Back
Top