Hydromax X50 Xtreme

smerc · Oct 31, 2014

jordey;617203 said:
isnt that sort of what the penomet is? you can change all the gators on them

Yeah, but not w/ adjustable girth tubing. The gaitors would be for different tube sizes instead for different pressures like the penomet.

growingwriter · Oct 31, 2014

I like your idea about the screw tops-of-tubes smerc, you could add length easily that way. My complicated idea was to try and make it easier to use the bathmate to add length, and I'm currently trying to work out if its worth while devising some kind of baffle or padding that would go into an x40 xtreme to restrict the pump to a length routine

smerc · Oct 31, 2014

growingwriter;617210 said:
I like your idea about the screw tops-of-tubes smerc, you could add length easily that way. My complicated idea was to try and make it easier to use the bathmate to add length, and I'm currently trying to work out if its worth while devising some kind of baffle or padding that would go into an x40 xtreme to restrict the pump to a length routine

There is that also. Different acrylic/polycarbonate cones that fit inside to make the girth sizes smaller, therefore targeting the vacuum more towards elongation/length.

Good idea! :cool:

I would just get an air pump cylinder and target length through air pumping. Leluv sells them for cheap.

growingwriter · Oct 31, 2014

Well the reason I bought a bathmate (and i'm sure i'm not alone) is that with the water pressure, its hard to overpump and cause permanent damage in one session. At the moment I'm planning on a VLC Tugger with a sizegenetics for length work, especially as the bathmate wont even be long enough to accomodate the 10" eventually want to get to, no matter how long it takes.

jordey · Oct 31, 2014

i think the main issues with trying to make it adaptable, apart from the cost and complexity of production, is that for length you need a tube which isnt much bigger than your girth. with a pump that thin the gator would likely be a big issue with digging in, as opposed to air pumping

smerc · Oct 31, 2014

growingwriter;617213 said:
wont even be long enough to accomodate the 10" eventually want to get to, no matter how long it takes.

What size are you currently?

DLD · Oct 31, 2014

Rumors go around about this pump but we still have not heard of it's creation yet. The second it is ready we will be the first outlet to offer.

growingwriter · Oct 31, 2014

smerc;617253 said:
What size are you currently?

8" in length and 5.4" girth right now

smerc · Oct 31, 2014

growingwriter;617330 said:
8" in length and 5.4" girth right now

You're wanting to surpass 10" or just get to 10" cemented?

Was thinking about the whole gaitor thing being difficult to fit an adjustable tube. Seems like you could bypass a lot of that issue w/ using a winevac type thing to get suction, rather than pumping the gaitor itself.

growingwriter · Nov 1, 2014

10" cemented I think. I'm upgrading my bathmate because i'm feeling I don't have the room to expand as much as I used to, so I think my gains from using it have slowed as a result. Thats why I think a supersized device is good - I'd never get to 12" internal length but if there was a device with that, then it'd accommodate my eventual goals. I do understand though that the majority of their customers wont want such a large device and so they haven't gotten around to it yet. Perhaps they've had poor goliath sales and so they are wary of going that large again. It is a shame though

smerc · Nov 1, 2014

Could be the reason. Wondering if they broken even, just not up to their roi projections. Someone may fill the void though as there are a few people wanting elephant trunks out there.

DLD · Nov 1, 2014

smerc;617439 said:
Could be the reason. Wondering if they broken even, just not up to their roi projections. Someone may fill the void though as there are a few people wanting elephant trunks out there.

I would love to have a X50 and get to take advantage of the extra vacuum it would offer over the Goliath. I have no choice but the Goliath. I remember having to test the Hercules when it came out and I could not fit half my junk into it and pulling it off was impossible. When the Goliath came out I was finally able to pump. So looking forward to the X50.

smerc · Nov 1, 2014

doublelongdaddy;617495 said:
I would love to have a X50 and get to take advantage of the extra vacuum it would offer over the Goliath. I have no choice but the Goliath. I remember having to test the Hercules when it came out and I could not fit half my junk into it and pulling it off was impossible. When the Goliath came out I was finally able to pump. So looking forward to the X50.

Can see you being the first to review one, since you seem to fit the description of someone who needs it

. So maybe you're the first to know if something did come in the works.

DLD · Nov 1, 2014

smerc;617526 said:
Can see you being the first to review one, since you seem to fit the description of someone who needs it . So maybe you're the first to know if something did come in the works.

I felt left out for a long time until they finally came out with the Goliath, everyone was making great girth gains and I really could not participate on the same level.

growingwriter · Nov 1, 2014

I wonder how hard it would be to modify a goliath with the valve and pump from an x40 xtreme...

smerc · Nov 1, 2014

Would have to make some type of adapter for the gaitor/pump thing. If the valve doesn't work, then you could saw the housing off and use some high PSI epoxy

.

Might as well just buy an acrylic tube and make your own company/product after you're done.

growingwriter · Nov 1, 2014

ideas are one thing, having the funding to enter into a market and compete - especially in this litigious world is another. Maybe some of the ideas we've mentioned could be looked at by the owner of the bathmate company, but I think that's all we can realistically hope for

Barnstool123 · Nov 1, 2014

doublelongdaddy;617495 said:
I would love to have a X50 and get to take advantage of the extra vacuum it would offer over the Goliath. I have no choice but the Goliath. I remember having to test the Hercules when it came out and I could not fit half my junk into it and pulling it off was impossible. When the Goliath came out I was finally able to pump. So looking forward to the X50.

Will the pump that comes with the extreme bath mates not fit in the Goliath valve?

growingwriter · Nov 2, 2014

no, there is no hole for the fitting from the hand pump to slot into the valve on the goliath

Barnstool123 · Nov 2, 2014

Damn.

Hydromax X50 Xtreme

0

0

0

0

0

0

doublelongdaddy

0

0

0

0

doublelongdaddy

0

doublelongdaddy

0

0

0

0

0

0

Similar threads