Ok Nico, you can google phimosis and find the surgical options you have. Some are ok, some have ugly results. If you choose one, tell the doctor exactly what you want, with pictures and everything.
Don't pull further down yet!! If you do, you will end up with your phimotic ring behing your glands, very tight and choking your glands. That would mean a trip to the emergency room, and a ugly cut on your foreskin.
The best, I'm sure, is to stretch it gradually. As I said, becouse you have primary phimosis (not caused by any disease or anything, but from birth), you CAN stretch it succesfully.
Hare pictures of the PVC device I made. Sorry for the bad light, flash was not working.
- On the first picture you see a cut up PVC pipe section. (This is not the one I used for this becouse I lost it, it's a piece of a re-modified homemade bibhanger... but I digress) that illustrates the cut you must make. You also need a hose clamp and I also used a little teflon.
So, cut the pipe like that (without the "widening" toward the top which is a feature of the hanger). The total pipe circunference minus the circumference section you remove shold be equal or less than your phimotic ring circumference.
Sand it real good on every part that will come in contact with your skin, don't leave sharp or angular edges as this would reduce your comfort time when wearing it.
Then, if you want put some teflon tape around it so it is even smoother. Teflon tape is very thin anyway, but as I said, this is optional and I used it with and without.
Finally, put the hose clamp on it and tighten it enough, so that you can put your phimotic ring (your foreskin hole) over the device. By loosening the clamp the Pipe will try to expand again, putting the pressure on your foreskin from the inside out. You may need to replace the PVC every once in a while so it keeps strong, and when you outgrow it.
I remember using some tape or wrap over my foreskin to secure the device so I don't need to hold it in place with my hand. Sometimes if I didn't, it would come out.
AND, buy some betamethasone cream and use it on your ring, but remember to not use periodically for over 2 weeks. Maybe 1 week with/one without could be best. That will make for faster stretching.
And well, I read you are developing a device for this. If you want to give one for fre..I mean need a beta tester this
you can send one my way. I sure need to stretch that shit good again becouse it appears I am gaining some girth (won't measure till christmas hehe) and it's getting in the way and overstimulating me during sex.
On the second pic, the device is as it would look just before you insert it under your foreskin.
Good luck with this, it's not as bad as others may think and you will do fine.
Don't pull further down yet!! If you do, you will end up with your phimotic ring behing your glands, very tight and choking your glands. That would mean a trip to the emergency room, and a ugly cut on your foreskin.
The best, I'm sure, is to stretch it gradually. As I said, becouse you have primary phimosis (not caused by any disease or anything, but from birth), you CAN stretch it succesfully.
Hare pictures of the PVC device I made. Sorry for the bad light, flash was not working.
- On the first picture you see a cut up PVC pipe section. (This is not the one I used for this becouse I lost it, it's a piece of a re-modified homemade bibhanger... but I digress) that illustrates the cut you must make. You also need a hose clamp and I also used a little teflon.
So, cut the pipe like that (without the "widening" toward the top which is a feature of the hanger). The total pipe circunference minus the circumference section you remove shold be equal or less than your phimotic ring circumference.
Sand it real good on every part that will come in contact with your skin, don't leave sharp or angular edges as this would reduce your comfort time when wearing it.
Then, if you want put some teflon tape around it so it is even smoother. Teflon tape is very thin anyway, but as I said, this is optional and I used it with and without.
Finally, put the hose clamp on it and tighten it enough, so that you can put your phimotic ring (your foreskin hole) over the device. By loosening the clamp the Pipe will try to expand again, putting the pressure on your foreskin from the inside out. You may need to replace the PVC every once in a while so it keeps strong, and when you outgrow it.
I remember using some tape or wrap over my foreskin to secure the device so I don't need to hold it in place with my hand. Sometimes if I didn't, it would come out.
AND, buy some betamethasone cream and use it on your ring, but remember to not use periodically for over 2 weeks. Maybe 1 week with/one without could be best. That will make for faster stretching.
And well, I read you are developing a device for this. If you want to give one for fre..I mean need a beta tester this
you can send one my way. I sure need to stretch that shit good again becouse it appears I am gaining some girth (won't measure till christmas hehe) and it's getting in the way and overstimulating me during sex.On the second pic, the device is as it would look just before you insert it under your foreskin.
Good luck with this, it's not as bad as others may think and you will do fine.