DLD

Double Long Daddy, The Guru
Staff member
Super Moderator
I just got my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Hydromax[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words]. here is a short video showing what is in the box, how it is shipped and some of the new features.


ORDER DIRECT FROM THE MANUFACTURER USING THIS LINK

<iframe width="560" height="315" src="//www.youtube.com/embed/lHlk9JboIcA" frameborder="0" allowfullscreen></iframe>

ORDER DIRECT FROM THE MANUFACTURER USING THIS LINK

OK, first I have to say the shipping was amazing! They really came through on the preorders with speed. I woke up to mine this morning and I was able to test it out just recently. First of all, it is muck stronger, suction-wise, they say 30% but it it quite a lot, determining it would be difficult but a serious increase in pressure. I think this comes from three places of improvement, 1. The new [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]comfort pad[/words] insert is very thick and comfortable and creates an amazing seal. 2. The Gator itself is much stiffer and 3. The taped seal along the top of the Gator is a very good sealing technique.

These all come together beautifully when you get the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Hydromax[/words] going. The increase in pressure makes it easier to get expansion faster but it also increases the risk of retention, I think restraint should be should when anyone is first using the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Hydromax[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words]. Now, I could not fit in this pump at 100% erect, it is just not possible so I did all testing in a semi erect state, it is a marked difference in the same time and effort in comparison to it's [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X-40[/words] and [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X-40[/words] models.

It is an amazing seal and the new contoured, insert [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]comfort pad[/words], extremely thick and cushiony, extremely comfortable. Biggest issue is you can not do Hardcore Stretches unless you remove the insert pad, which is very simple. At first I was very disappointed than I realized they could be done simply by removing the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]comfort pad[/words] insert....very convenient and smart design for DLD HardCore Stretches. I don't think many users will need pump sleeves after using the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Hydromax[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words], but they might want to keep them handy for Hardcore Stretching.

The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Hydromax[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] expansion is amazing, just like it's older siblings it brings a massive gain after only a few minutes pumping. The power is clean and there is plenty of it. Using the pump outside the bath was very easy and it is strong enough to use with no water at all, but water does make the process much better.

I think the $40 increase in price was a bit steep but when I really got down to the nuts and bolts I can see where they invested some serious money. The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]comfort pad[/words] is just one of the many improvements on the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Hydromax[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words]. The smart latch is very similar to the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Penomet[/words], extremely efficient and very quick. The pump feels very familiar and the changes become evident with use but stay within the traditional look of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words] pumps.

As far as guys who are north of 9", you will need the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X-40[/words] as the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Hydromax[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] will not accommodate an erect size beyond 9" The depth is about an inch deeper than the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X-40[/words] which measures about 8.5" The difference is from the depth of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]comfort pad[/words]. If the pad is not in place the dimensions are identical. They could actually produce deeper comfort pads that would accommodate longer penis's and it is something I will suggest to the company.

I would love to see a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X-40[/words] version of this but I don't think that will happen for a while. We waited about 1.5 years for the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X-40[/words] after the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X-40[/words] was released. I assume we will see the same here. I hope [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words] comes to market also with a mid-size version that would complete the stables.

My hats off to [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Hydromax[/words] and everyone on the forums who helped in to formation of the new [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Hydromax[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] pump! I know the companies listen to our feedback so please relate your experiences when your model arrives. Definitely an advanced, quality tool and most likely the new face of [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Bathmate[/words] in the future.

Packaging was very private. It was packed in a box, in a box, in another box that is shrink wrapped. Beautiful packaging, such a shame it is buried so deep in the package. The new look is definitely a good look and a mature evolution in the largely, untapped, water pump market.

I am still sitting here with it on as I type...no mess, tight seal and incredible expansion!
 
Thanks DLD for putting on a open box video. I can't wait for you to do a head to head comparison between the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] and [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]penomet[/words].
 
so DLD are u uncircumsized to get the gains u did? i just think it would take years for my uncirumcised skin to stretch to 10" from 8.5" but i guess i could be wrong I just hope I can achieve 10" with the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] from 8.5" and im more concerned with length.
 
DLD [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] wont reply to my emails, i sent them two by now, i ordered on 28 sept and still no shipment info.
 
Supra;509554 said:
Looking good Mike, great video

Thanks:) I need to lose a few pounds but I am planning on doing the [words=http://www.mattersofsize.com/forum/showthread.php?64036-My-Best-Work-Ever-Penis-Enlargement-will-Be-Changed-Forever-gt-gt-Gain%20inches%20with%20SRT-Theory-and-Routine]SRT[/words] Routine when I hit Florida. Lose a few pounds:)

chris89;509565 said:
so DLD are u uncircumsized to get the gains u did? i just think it would take years for my uncirumcised skin to stretch to 10" from 8.5" but i guess i could be wrong I just hope I can achieve 10" with the [words=https://shop.mattersofsize.com/products/sizegenetics-penis-extender]extender[/words] from 8.5" and im more concerned with length.

I am circumcised but I gained much of my foreskin back (about half). An inch and a half gain is very possible and I have seen it happen in under 6 months! Get stretching! The sooner you start the faster that 1.5" will come.

Junglefever;509662 said:
DLD [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] wont reply to my emails, i sent them two by now, i ordered on 28 sept and still no shipment info.

I would think they are in overload mode at this point. I would exercise a bit of patience, they may have gotten more orders than they planned for. I will look into the status of their emails personally and let you know what I know.
 
Medicating;509950 said:
You're not alone buddy. I ordered yesterday and didn't get shipment info straight away either and I'm already getting so impatient!

Remember there was pre-orders, I think the first 100 sold and shipped, the new shipment must have just came in as they are filling those orders now. Be patient, it seems like every guy in the world wants one. As long as your name and order is in you will have seniority over orders after you.
 
Hi Dld did you manage to get some more information? I am patient but how long do you think it might take to get to recieve my order? Could it be a month?
 
Junglefever;510349 said:
Hi Dld did you manage to get some more information? I am patient but how long do you think it might take to get to recieve my order? Could it be a month?

I will get an update for you but I think it will arrive on Tuesday as a second shipment was made after initial pre-orders. I will find out for sure for you. I mean, they may have sold out???? I doubt it, but let me find out.
 
Junglefever;511174 said:
I got mine on the 9th and recieved tracking.

I think a lot of the correspondence for guys ordering is going into their spam box.
 
Junglefever;509662 said:
DLD [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words] wont reply to my emails, i sent them two by now, i ordered on 28 sept and still no shipment info.

I just want to tell myself if i ever read this again, "work hard at your job you lazy cunt".
 
Junglefever;511490 said:
I just want to tell myself if i ever read this again, "work hard at your job you lazy cunt".

Send me you name and address and I will find out for you. PM me.
 
i love this pump its much better then there original from fit to pulling force. i seem to hold thickness much longer then with the old device and no extra fluid retention.
 
diesel225;512758 said:
i love this pump its much better then there original from fit to pulling force. i seem to hold thickness much longer then with the old device and no extra fluid retention.

Seems like no one is getting retention...that is great but I wonder why?
 
i have no clue but it is true i wore it for 15 min straight and then got some retention for 24 hrs but if you just do as you advise 5 min on 5 min off 5 min on no retention really at all but huge expansion.
 
diesel225;513342 said:
i have no clue but it is true i wore it for 15 min straight and then got some retention for 24 hrs but if you just do as you advise 5 min on 5 min off 5 min on no retention really at all but huge expansion.

Good to know, thanks Diesel.
 
I am interested in getting the new [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] and worried at the same time. What makes it different than the original [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]?
 
megzobo;513505 said:
I am interested in getting the new [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words] and worried at the same time. What makes it different than the original [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Bathmate[/words]?

Biggest differences thus far have been increased pressure, removable [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words], new valve mechanism and due to the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]comfort pad[/words] it gives 9" of length instead of 8" of length (where the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X-40[/words] starts to become too small). The biggest issue men are having with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]Hydromax[/words] is mastering the new valve and a break in period that takes a few sessions. The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Penomet[/words] is also a brilliant choice, especially if you are into modifications as it is highly modifiable.
 
I just ordered the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words]. Nice that I could pay in my own currency, and the website changed to my language also. Now all I have to worry about is customs fees...
 
Zealie;532659 said:
I just ordered the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98 ]X40[/words]. Nice that I could pay in my own currency, and the website changed to my language also. Now all I have to worry about is customs fees...

I hope all goes well. It is a beautiful pump!
 
Well i was reading review on [words=http://www.mattersofsize.com/join-now.html]MOS[/words] that [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]penomet[/words] has more force to creat vacuum than [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words]. So please suggest [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] or [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]penomet[/words]. I am confused.
 
master_mind;650930 said:
Well i was reading review on [words=http://www.mattersofsize.com/join-now.html]MOS[/words] that [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]penomet[/words] has more force to creat vacuum than [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words]. So please suggest [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words] or [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]penomet[/words]. I am confused.

The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Penomet[/words] tests were not official nor were they fair in the way they were done. We did our own pressure testing and the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BathMate[/words] was far superior. Plus, with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BathMate[/words] you are going to get incredible customer service, the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Penomet[/words] you will not and that is a big deal.
 
templnite;651365 said:

This was the test that was accurate. It is plain to see not only is the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BathMate[/words] stronger but the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Penomet[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]gaiters[/words] really make no difference.
 
Nussie;661517 said:
I'm not seeing the 25% discount. Is the promotion over???

There is no discount but you get a bunch of extras and you also get the great warranty we have here, not to mention the support directly from [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BathMate[/words], we are the official forum of the real [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BathMate[/words] company. [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BathMate[/words] no longer discounts their pumps due to how many knockoffs have been made. These cheaper version of the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BathMate[/words] are complete garbage so save yourself a lot of grief and buy with confidence through the Brotherhood.
 
Nah man you just need to experience a real pump like [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]bathmate[/words]. I promise its worth it, and pretty good warranty as well
 
Back
Top