Hanging Holy Grail

McMaster-Carr
70175K7
Aluminum Dust-Tight Cord Grip
W/Steel Mesh 1-1/2" NPT Male,
1.20"-1.50" Cord Diameter

This is it dudes it's very comfortable and the harder you pull the tighter the grip. It can be easily rigged to hold weight. Rock on bro's...
 
Last edited:
That looks really cool. How much weight have your tryed on it? I think what is really cool about it is that it would squeeze the blood out of the glans as it pulled tighter. Does it grip tighter on the glans than on any other part of the penis? Any pain overall?
 
That looks very similar to the swimcap method of hanging that Tom Hubbard used to advocate (see here)... I've used an [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words] in the past that worked on a similar principle and found that after wearing it for an hour or so, i got alot of swelling on the glans (especially on the tip area), if i didn't wrap very well.

Very clever idea though...
 
aares said:
WTH? Chinese Penis Trap :D Looks interesting!
Click to expand...

ROFL!!! Thats freakin hilarious.

Ive been using a captns wench but I must say this looks ingenious because its so simple.

Great Job! But yeah whats the most you can hang with that??
 
Bump for how much weight it can take.
Regardless, looks like it would make a killer [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words]
 
Where do you get the materials from??? That looks very interesting... I'm still learning how to use the BIB starter I have.... I think this would make an interesting [words=http://www.phallosan.com/shop/catalog/default.php?z=eNortjIxtVKyL0pNszWxMFcrSSxKTy2JL0hMT7U1UisoykyxtbBQSy4tLsnPjS8uKcrMS7dVsgZcMMpbEbo%2C]ADS[/words] if it can be cut into a short enough length...
 
I looked it up on the internet and several companies handle it. The problem I see is that it is going to pull on the glans and just the end of the penis not the inner shaft. I think it would be dangerous and could cause some serious long term problems. Cost is about $16 to $18 bucks. GS
 
what it is , is you put electrical cord through it, and it screws to the head of the cord, the end that plugs into the wall. this keeps the rubber around the wires from bending and splitting. i used to work with three phase a.c. power and we had these wires, or cords they were so thick and heavy, that were a good 1 1/2 inch diameter! that kind of weight would need be hard to handle, so we'd put these metal things like in the pic. on the cords. when you push the wire mesh towards itself, the inside diameter will increase. when you pull on it, the inside diameter will decrease, and grip the wire cord; or in this case it will grip your dick. one danger is that it is wire mesh, and any stray tiny wire that happens to poke out, may poke into your dick and that'll be like a needle! ouch! so you'll need a real good wrap for this. it really is a chines finger toy made into an adult's tool. i don't know if i descibed it good. i'm sure that you can find one at home depot or lowes etc. just ask for extension cords, big ones. they may have them. i doubt any of this makes sense. maybe do a search on
www.grainger.com
 
I haven't had that much time to experiment with it but here's what I have found so far.

It seems to pull evenly not just on the head.
I have not seen or felt any stray wires. They seem to be continious, no frays.
It does get a little sore but nothing unbearable or that couldnt be fixed with a thicker wrap. (I'm going to try to find a sheathing similar to that found on an aluminum bat handle that I can roll onto my dick similar to a condom to provide more comfort).
I would definitly get the next size up because it would be alot easier to get my dick into it. So if your around 5.5 - 5.75 girth I would go with 70175K8 instead of 70175K7
 
Hung 2 gallons of paint comfortably so whatever that weighs its all good. I double wrapped with self adhesive [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace[/words] wrap and it was comfortable as hell!!!!
I'm guessing a gallon of paint weighs around 9 or 10 lbs. Looks a little odd after unwraping but a few squeezes and its all normal :)
 
Last edited:
psychojitsu:

Could you estimate the allowable girth range of the one you use (70175K7), a smaller one (70175K6), and a bigger one (70175K8)?

I am interested in getting one of these, but my EG is currently around 4.5"-4.75", so maybe I should go with the smaller one... not sure though.

Has anybody else tried this yet?
 
Last edited:
mmm, well, I have just 2 more questions if you dont mind...

1.- What is your Flaccid Stretched Girth without/with wrap?

Also, The specs for 70175K7 say: 1 1/2" Trade size, NPT and 1.20"-1.50" For Cord dia., so...

2.- Is 1.20"-1.50" the min and max diameters, like when stretched and loose? If not, please specify, that would give an estimate of the girths this thing allows.

Thank you for this idea, cant wait to order one.

Chi
 
Great pdf, actually has diameter and "girth" tables for choosing...
Also, much more choices, but couldnt find the prices on www.leviton.com. I´ll check it out tomorrow, may have to register with them or something.

Also, I might be wrong, but I think they don´t sell online... too bad

Chi
 
I stand up and compress the mesh pressing the connector end against the cabinet in my bathroom then slide my dick halfway in. Shouldnt be near your nuts dude.
 
I may be interested in this in the near future because I'm having serious problems adjusting my bib hanger. If I had more time I'd get it adjusted correctly but work has been busy lately and I just don't feel like doing even more work when I get home. Is this thing simple to use or does it have to be put on with extreme accuracy to work properly?
 
German Stallion said:
I looked it up on the internet and several companies handle it. The problem I see is that it is going to pull on the glans and just the end of the penis not the inner shaft. I think it would be dangerous and could cause some serious long term problems. Cost is about $16 to $18 bucks. GS
Click to expand...
Yes, I agree, it seems impossible for this to grab any inner tissues.
 
richard long said:
Yes, I agree, it seems impossible for this to grab any inner tissues.
Click to expand...
What if it were used as a stretching device instead of a prolonged hanging device? If I am correct, the manual stretchers on this site usually grasp just below the head and pull by the head with very little or no skin pulling at all. This way you wouldn't necessarily have to use your hands when you stretch if you got a long piece of cord or rope to loop around your foot. Psychojitsu may have found an awesome manual stretching device here...
 
I just ordered one each of 70175K7 and 70175K8. I still have my theraband wrapping that I used with my bib hanger so would it be okay to use that with this device instead of [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace bandage[/words]? Also, does it tend to try to pull skin over the head? It looks to me like the [words=http://www.mattersofsize.com/forum/showthread.php?44-Ace-Strapped-Jims-Joint]ace bandage[/words] in the pics would move forward, pulling skin along with it. Of course I wouldn't know because I haven't tried it yet but I'd like a better understanding of how this thing grips, how you wrap, and what exactly it squeezes and pulls on. Do you stretch it out, pull the skin back toward the base, wrap it tightly, and then attach the cord?
 
If that is as bad as it gets after unwrapping then I can't wait to get started. I used to really make mine look bad using my bib starter but yours looks like there was nothing attached to it at all. I ordered my cords on Sunday so hopefully they'll be here by Friday at the latest. For pics of how damaged my shaft looked, check my sig.
 
I just received my cords in the mail today so I'll start experimenting with them tonight. As far as stray wire poking into your dick, I don't think that will be a problem because each individual wire is too large in diameter to do that. Judging by looking at the cords and feeling them, you'd have to actually cut a wire and turn it up/down to make it pierce your dick. I could understand if the wires were as thin as electrical wire but they seem pretty heavy duty. I'll take some close up pics tonight to try to show you how thick the wires are.

I'm not trying to hijack psychojitsu's thread but I don't work 16 hour days either so I think I'll be able to spend some time and offer some more thorough insight into this hanging method. I may have some actual hanging or stretching pics up tonight also.
 
New guy here. I just bought one and received it today as well. Tried it out over lunch. Works pretty well, just need to have more wrap around the head area than anywhere else. Tried it with 15lbs and definately could feel the pull on ligs. Will keep working with better wrap styles. I could see how you could use a lot of weight once you got used to it and perfected wrapping.
 
With the way these things seem to work, I'm sure more wrap is better to a certain extent because if you push in on the cord it will increase in diameter. You insert your dick with quite a bit of wrap on it and then pull on the cord and it tightens up. I tried this earlier with my finger and a shit load of toilet paper wrapped around it and the more toilet paper I used, the tighter this thing gripped. I'm sure you can use too much wrapping but I do believe that more than usual is needed. I can't wait to get home and try this.
 
One more question for psychojitsu:When you hang or stretch with this thing, are you erect or partially erect? Either you are erect or your flaccid size is amazing because all of those pics show what looks like at least a partially erect dick.
 
psychojitsu, I'm having some problems with slipping. I have the K8 and the K7 and neither one will grip enough to pull more than a couple pounds before my dick slips completely out, leaving the wrapping inside the grip. I even tried wrapping it pretty tight and taping it together to secure it on my dick but it still slips out.

What I'm wondering is that since your flaccid size is very large, maybe normal guys like myself need a smaller one. My erect girth mid shaft is 5.5" BTW. But what is getting to me is that it is hard to get it in the K7 but once its in, it slips right out like its got KY jelly on it. Its like it doesn't grip anywhere near enough but I feel that if I go to a smaller cord that I won't be able to get it in at all. I'll keep trying to see if I can get it to work right.

If you have the time, please give us a step by step as to how you get this thing to grip so well because surely I'm not the only one who is having trouble with this.
 
You must log in or register to reply here.
Back
Top