RR04;767116 said:
One of these days you psychos are gonna expressively stretch your dick off your body and it’s going to fall on the floor!

Lots of dicks on the floor!

Bachelorette-Party-font-b-Decor-b-font-font-b-Penis-b-font-Confetti-Set-of-3_large.jpg
 
huge-girth;767285 said:
All the dicks have mushroom head size

Good eyes! I wish I had a mushroom :) A magic mushroom that is :)
 
Re: Big Schwanz Acht vs. inertia...or a 'how to' for the lazy guy to get

guys please don't forget about understanding the actual measurements when using the BM because it is VERY deceiving and this is important to understanding true gains from mathematical perspective

***remember if you are hitting a certain number at MAX pressure, you have to subtract about .7 of an inch from that number because of the gator compression. it can be less than that depending how much pressure you use.

***THEN and only then will you find out your PUMPED BONE-PRESSED ERECT LENGTH measurement. and it is indeed BONE-PRESSED because the gator is pressed and compressed into the pubic bone

*so keep in mind this is a new measurement that we must start following. this is not just a BPEL, it is a PBPEL because a pumped version of penis will be longer and thicker than unpumped

here is my example:

- I hit 8.7 in the BM on whatever set it is. I subtract .7. Realistically it is now 8" in the BM. My PBPEL is 8". This is a completely different measurement than BPEL or EL when you are unpumped. So unpumped for me usually is minus another approximately .5, it could be a little more or less than that depending on number of sets and etc. you get the idea. So my unpumped BPEL could be 7.6 for example and unpumped EL could be 7.3. Hope this makes sense because it's very important
 
Last edited:
Re: Big Schwanz Acht vs. inertia...or a 'how to' for the lazy guy to get

guys please don't forget about understanding the actual measurements when using the BM because it is VERY deceiving and this is important to understanding true gains from mathematical perspective

***remember if you are hitting a certain number at MAX pressure, you have to subtract about .7 of an inch from that number because of the gator compression. it can be less than that depending how much pressure you use.

***THEN and only then will you find out your PUMPED BONE-PRESSED ERECT LENGTH measurement. and it is indeed BONE-PRESSED because the gator is pressed and compressed into the pubic bone

*so keep in mind this is a new measurement that we must start following. this is not just a BPEL, it is a PBPEL because a pumped version of penis will be longer and thicker than unpumped

here is my example:

- I hit 8.7 in the BM on whatever set it is. I subtract .7. Realistically it is now 8" in the BM. My PBPEL is 8". This is a completely different measurement than BPEL or EL when you are unpumped. So unpumped for me usually is minus another approximately .5, it could be a little more or less than that depending on number of sets and etc. you get the idea. So my unpumped BPEL could be 7.6 for example and unpumped EL could be 7.3. Hope this makes sense because it's very important

Thanks for this explanation. I know I'm going to be hitting higher numbers inside the X40 when I start doing girth exercise.
 
Re: Big Schwanz Acht vs. inertia...or a 'how to' for the lazy guy to get

ULTIM8 is exactly correct...the Bathmate sticker should be used as a reference-point vs. an actual length. I experimented on both my X40 and Goliath models by sealing them on my kitchen counter and using The VacuVin to compress the gaiter fully...then I used an actual tape measure to compare it against The BM gauge. Both were showing 3/8" more than the real measurement, so I usually subtract 1/2" from what I see in the cylinder during my sessions.
I don't think my BPEL and my PBPEL would be much different, but my MSEG and PMSEG definitely is.
This is a good thing to keep-in-mind during your training (I'm thinking Bathmate knew what they were doing when placing that sticker, lol)
 
Re: Big Schwanz Acht vs. inertia...or a 'how to' for the lazy guy to get

ULTIM8 is exactly correct...the Bathmate sticker should be used as a reference-point vs. an actual length. I experimented on both my X40 and Goliath models by sealing them on my kitchen counter and using The VacuVin to compress the gaiter fully...then I used an actual tape measure to compare it against The BM gauge. Both were showing 3/8" more than the real measurement, so I usually subtract 1/2" from what I see in the cylinder during my sessions.
I don't think my BPEL and my PBPEL would be much different, but my MSEG and PMSEG definitely is.
This is a good thing to keep-in-mind during your training (I'm thinking Bathmate knew what they were doing when placing that sticker, lol)

A bit of fake extra confidence :) lol 3/8 instant gain! :)
 
Re: Big Schwanz Acht vs. inertia...or a 'how to' for the lazy guy to get

ULTIM8 is exactly correct...the Bathmate sticker should be used as a reference-point vs. an actual length. I experimented on both my X40 and Goliath models by sealing them on my kitchen counter and using The VacuVin to compress the gaiter fully...then I used an actual tape measure to compare it against The BM gauge. Both were showing 3/8" more than the real measurement, so I usually subtract 1/2" from what I see in the cylinder during my sessions.
I don't think my BPEL and my PBPEL would be much different, but my MSEG and PMSEG definitely is.
This is a good thing to keep-in-mind during your training (I'm thinking Bathmate knew what they were doing when placing that sticker, lol)

Shit good point, I completely forgot to mention MSEG and PMSEG

My PMSEG is definitely a whopping difference than MSEG LOL

My PBPEL or just even PEL is also a slight bit longer than unpumped
 
Re: Big Schwanz Acht vs. inertia...or a 'how to' for the lazy guy to get

Shit good point, I completely forgot to mention MSEG and PMSEG

My PMSEG is definitely a whopping difference than MSEG LOL

My PBPEL or just even PEL is also a slight bit longer than unpumped

The more you know....
 
Re: Big Schwanz Acht vs. inertia...or a 'how to' for the lazy guy to get

ULTIM8 is exactly correct...the Bathmate sticker should be used as a reference-point vs. an actual length. I experimented on both my X40 and Goliath models by sealing them on my kitchen counter and using The VacuVin to compress the gaiter fully...then I used an actual tape measure to compare it against The BM gauge. Both were showing 3/8" more than the real measurement, so I usually subtract 1/2" from what I see in the cylinder during my sessions.
I don't think my BPEL and my PBPEL would be much different, but my MSEG and PMSEG definitely is.
This is a good thing to keep-in-mind during your training (I'm thinking Bathmate knew what they were doing when placing that sticker, lol)

I will always come back to this progress log when it's time for me to focus on girth. Yourself and Ultim8 has done us a lot of favor with this discovery.
 
Re: Big Schwanz Acht vs. inertia...or a 'how to' for the lazy guy to get

Shit good point, I completely forgot to mention MSEG and PMSEG

My PMSEG is definitely a whopping difference than MSEG LOL

My PBPEL or just even PEL is also a slight bit longer than unpumped

how long does it take you to reach your max in the cylinder? For me, after a decent warm-up, I can almost pump to my max immediately. At that point I do a lot of Kegels and RK's at the highest pressure I can stand...it's pretty intense and I only recommend this to seasoned BM users
 
Re: Big Schwanz Acht vs. inertia...or a 'how to' for the lazy guy to get

Hi Big, just catching up on your thread since my hiatus. Glad to read that your health has improved. Your thread is a wealth of knowledge. I’m struggling with girth so I definitely plan to reread it from the beginning in the near future.
 
Re: Big Schwanz Acht vs. inertia...or a 'how to' for the lazy guy to get

Hi Big, just catching up on your thread since my hiatus. Glad to read that your health has improved. Your thread is a wealth of knowledge. I’m struggling with girth so I definitely plan to reread it from the beginning in the near future.

All the needed info to make massive girth gains are written in this thread
 
Re: Big Schwanz Acht vs. inertia...or a 'how to' for the lazy guy to get

Hi Big, just catching up on your thread since my hiatus. Glad to read that your health has improved. Your thread is a wealth of knowledge. I’m struggling with girth so I definitely plan to reread it from the beginning in the near future.

Thanks Bro, those stonez are no joke!

If you have a modded BM, all you have to add is the time and intensity (throwing some Kegels/RKs in there help, too)...good luck!
 
Hey Mike, your posts/replies are forked-up.

The Dr. said kidney stones are probably half hereditary and half diet or lifestyle...I've just replaced almost every beverage w/water since dehydration can exacerbate the problem
 
Big Schwanz Acht;n1814658 said:
Hey Mike, your posts/replies are forked-up.

The Dr. said kidney stones are probably half hereditary and half diet or lifestyle...I've just replaced almost every beverage w/water since dehydration can exacerbate the problem

God help me, I pray I don't encounter such a problem.
 
Help Users

You haven't joined any rooms.

    You haven't joined any rooms.
    Back
    Top