Progress thread Big Schwanz Acht vs. inertia...or a 'how to' for the lazy guy to get

[joaobigdick]

I have The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] and The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Goliath[/words], both modded w/The VV...the nice thing about the mod is the fact that you can easily modulate the pressure, up or down. I've beat my d!ck up so much that going 110% in either cylinder feels almost normal to me know, but that's after 2 years. Go at your own pace, but make sure you're always striving for more intensity in all exercises, that's where I've seen the most success

Thanks for the answer, brother! I'll take my time and get a VV in a couple months. All the gains that you made in girth came exclusively from the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words]? How much gains from the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] itself and homw much from the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] + VV mode?

Thank you!

 

[Big Schwanz Acht]

I'd say 90% of my overall gains have been from The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] with The VV mod...now that I've begun using my [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words], that percentage will hopefully be closer to 50%/50%.
I'd love to get to 9"X7" so I'll need to concentrate on length, (the last BPEL measurement I took was at about 90% EQ and I was about 7.75"X6.875"). Hoping to get some positive results from the new(ish) routine...I'll know on the 10th when I measure for Rocky's contest

 

[joaobigdick]

I'd say 90% of my overall gains have been from The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] with The VV mod...now that I've begun using my [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words], that percentage will hopefully be closer to 50%/50%.
I'd love to get to 9"X7" so I'll need to concentrate on length, (the last BPEL measurement I took was at about 90% EQ and I was about 7.75"X6.875"). Hoping to get some positive results from the new(ish) routine...I'll know on the 10th when I measure for Rocky's contest

You'll make it, my friend! Hopefully on the 10th, when I measure, I'll see some gains too! One more question: Do you get much FR? Did the FR harmed your gains?

 

[kyomoto]

I'd say 90% of my overall gains have been from The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] with The VV mod...now that I've begun using my [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words], that percentage will hopefully be closer to 50%/50%.
I'd love to get to 9"X7" so I'll need to concentrate on length, (the last BPEL measurement I took was at about 90% EQ and I was about 7.75"X6.875"). Hoping to get some positive results from the new(ish) routine...I'll know on the 10th when I measure for Rocky's contest

Incredible. Now i can't wait for time to pass by so quickly. I want to get huuuuuge.

 

[BIGDADDYBOOTYBREAKER]

Incredible. Now i can't wait for time to pass by so quickly. I want to get huuuuuge.

I am feeling the opposite for myself lately. I feel content and happy with my current size, don't quite have the drive I once did.

 

[Big Schwanz Acht]

I am feeling the opposite for myself lately. I feel content and happy with my current size, don't quite have the drive I once did.

Not buying this for a minute...trying to lull us to sleep? lol

 

[DLD]

Not buying this for a minute...trying to lull us to sleep? lol

Haha, exactly

 

[Big Schwanz Acht]

You'll make it, my friend! Hopefully on the 10th, when I measure, I'll see some gains too! One more question: Do you get much FR? Did the FR harmed your gains?

Thanks for the props, bro! The 1st year I had significant FR after every session, when I started breaking my routine into three 10 minute stages and that helped...I also believe that I began getting used to the amount of pressure I was placing upon my body, (so it's probably a combination of the two). I still get a minimal amount of the 'donut effect' below the head, but after a few hours it goes away. I don't think there's been anything negative with having FR

 

[Big Schwanz Acht]

It's been a while since I've updated this thread and I'm only doing it because my morning session today was probably the best one I've had in months. (I base this on the fact that I consistently reached my personal best in The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] throughout all three stages).

The first 30 minutes in the shower were spent stretching (@5 mins) and then [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words] stretches/bundles/all-angles/etc.(I particularly like the feeling of bundled, BTC's with the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words] trapped behind my thighs...grrrrrrreat stretch). My EQ was very strong and entered The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] at about 90%, pumped-up to about 75% of my max and noticed I was already past the 8" mark. Spent 10 minutes at this stage and did my normal Kegel/RK and leveraged side-to-side stretches while in the tube. A few jelq's and then round two, easily surpassing 8" and maintaining 8 1/4" at about 90% max...same drill, ten minutes. Last round, 100% pressure, included rhythmic pulsing (manually pressing the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] into my body then releasing in rhythm to my K's/RK's) and I kept upping the pressure bit-by-bit with my VV pump. I looked down and was 8 1/2" on the gauge and could surpass that line (my label/sticker doesn't have any lines or numbers past that) so I'd estimate 8 5/8"-8 3/4". Now I've 'bench-tested' my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] and found the gauge to be about 3/8" optimistic, (so I only use it for reference points not actual length), but that would put me well over the 8" mark! I was a tad disappointed when I took my last measurement for Rocky's Competition, because I didn't gain anything in that month period, so this is very encouraging and hoping it translates to BPEL on 1/10

 

[DLD]

Optimism is passing the 8 inch mark! Excellent work!

 

[GOLDEN TEACHER]

It's been a while since I've updated this thread and I'm only doing it because my morning session today was probably the best one I've had in months. (I base this on the fact that I consistently reached my personal best in The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] throughout all three stages).

The first 30 minutes in the shower were spent stretching (@5 mins) and then [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words] stretches/bundles/all-angles/etc.(I particularly like the feeling of bundled, BTC's with the [words=http://www.mattersofsize.com/forum/showthread.php?83577-Length-master-official-order-thread-now-shipping-06-16-2014!!!]LM[/words] trapped behind my thighs...grrrrrrreat stretch). My EQ was very strong and entered The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] at about 90%, pumped-up to about 75% of my max and noticed I was already past the 8" mark. Spent 10 minutes at this stage and did my normal Kegel/RK and leveraged side-to-side stretches while in the tube. A few jelq's and then round two, easily surpassing 8" and maintaining 8 1/4" at about 90% max...same drill, ten minutes. Last round, 100% pressure, included rhythmic pulsing (manually pressing the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words] into my body then releasing in rhythm to my K's/RK's) and I kept upping the pressure bit-by-bit with my VV pump. I looked down and was 8 1/2" on the gauge and could surpass that line (my label/sticker doesn't have any lines or numbers past that) so I'd estimate 8 5/8"-8 3/4". Now I've 'bench-tested' my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] and found the gauge to be about 3/8" optimistic, (so I only use it for reference points not actual length), but that would put me well over the 8" mark! I was a tad disappointed when I took my last measurement for Rocky's Competition, because I didn't gain anything in that month period, so this is very encouraging and hoping it translates to BPEL on 1/10

Wow! This is excellent news Big 👍 I'm made up for you buddy. I'm going to start saving up and treat myself to a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] 😆

 

[DLD]

Wow! This is excellent news Big 👍 I'm made up for you buddy. I'm going to start saving up and treat myself to a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] 😆

[words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] is a big boy toy! You will love it! Be sure to get the Extreme or the Wine-vac modification to make it even better.

 

[Big Schwanz Acht]

I'd say I'm 70% in my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] and 30% in my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Goliath[/words]...for some reason I feel a more intense 'stretch' when I'm all-crammed into the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words]

 

[DLD]

I'd say I'm 70% in my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] and 30% in my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Goliath[/words]...for some reason I feel a more intense 'stretch' when I'm all-crammed into the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words]

The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] may be the next choice.

 

[Big Schwanz Acht]

The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] may be the next choice.

Since I already own The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Goliath[/words], I doubt the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] has anything more/new to offer. What I have been trying to find is a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]hydropump[/words] that isolates your shaft from your scrotum...I believe I saw someone post here on [words=http://www.mattersofsize.com/join-now.html]MOS[/words]. Essentially it has a larger/bulbous chamber and a longer, cylindrical chamber and it's a one-piece unit.

If anyone remembers seeing it or the original poster reads this, I'd be very interested in learning more.

Any way, Merry Christmas, (or Happy Festivus) to all!

 

[DLD]

Since I already own The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Goliath[/words], I doubt the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X50[/words] has anything more/new to offer. What I have been trying to find is a [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]hydropump[/words] that isolates your shaft from your scrotum...I believe I saw someone post here on [words=http://www.mattersofsize.com/join-now.html]MOS[/words]. Essentially it has a larger/bulbous chamber and a longer, cylindrical chamber and it's a one-piece unit.

If anyone remembers seeing it or the original poster reads this, I'd be very interested in learning more.

Any way, Merry Christmas, (or Happy Festivus) to all!

Happy Christmas to you too. The [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Goliath[/words], my favorite pump, is awesome but the newer models do provide more vacuum. This is easily solved with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Goliath[/words] by adding a wine-vac. So I suggest adding that and the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Goliath[/words] will be good for life.

 

[Big Schwanz Acht]

This is easily solved with the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Goliath[/words] by adding a wine-vac. So I suggest adding that and the [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Goliath[/words] will be good for life.

I guess I'm 'good-for-life' then, (both my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] and [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Goliath[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words]'s have been modded for a year now). I would like to continue exploring that 'isolation' pump that I glimpsed a while back...it essentially has a chamber for your scrotum and a cylinder for your shaft, (but all one-piece)...if anyone one has any intel, please share

 

[DLD]

I guess I'm 'good-for-life' then, (both my [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]X40[/words] and [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Goliath[/words] [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]BM[/words]'s have been modded for a year now). I would like to continue exploring that 'isolation' pump that I glimpsed a while back...it essentially has a chamber for your scrotum and a cylinder for your shaft, (but all one-piece)...if anyone one has any intel, please share

Definitely good for life, just don't break your [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Goliath[/words]!

 

[Big Schwanz Acht]

Definitely good for life, just don't break your [words=https://officialhydromaxpump.com/?uid=6&oid=2&affid=98]Goliath[/words]!

That sucker is a tank, it'll break me before I break it

 

[Big Schwanz Acht]

Hey Mike, there's a strong probability of 'adult entertainment-links' within my routine thread...feel free to ixnay any that you deem inappropriate