- Joined
- Apr 6, 2009
- Messages
- 853
I’ve been using my Bathmate X-40(BathmateG) for a while now. It is a great tool that works mainly girth and somewhat for length. I’m very pleased with my BathmateG.
The foam padding that touches your body while using the Bathmate will eventually come off, no matter how careful you handle it. When this happens you got a few options to get you Bathmate back into action; like buy new foam padding and glue it back on or buy a silicon sleeve. If you’re working with a BathmateG chances of finding a proper sleeve are very small.
I was tired of searching for a sleeve and didn’t like the idea of gluing another mofo back on just to lose it even sooner. I came up with an idea to use blue disposable power-free plastic gloves (used in labs and food industries), large size. It is so easy, such a minor mod, but IMHO it makes the difference.
Here is how to employ it:
1. First you need to completely get rid of the foam padding and all of the remaining glue. It will come off quite easy when dry.
2. Take a LARGE blue power-free disposable plastic glove and cut off the half of all fingers. Then cut all pieces that separate the fingers (except the thumb). Unite four fingers! You want to keep the material as long as possible.
3. The finger part of the glove will stay inside the BathmateG and wrist part can be fitted behind the first “ribs” of the pump.
4. Fill up your BathmateG and you’ll see that water pushes the glove outside. This part is hard to explain for me, it is more an experience thing. You should have a hole to put your erect penis in, so you might want to let some water out and push the material to the side. Fill it up as much as possible. Now press the BathmateG against you body and carefully pump. You might end up with water trapped in the glove material outside the BathmateG. Just pump and try to get rid of that water. You may perfectly succeed with this step at first, but it will come fast.
5. Pump for 20 min with your own pump intervals. Throw away the glove when finished.
When properly executed (I tested it over 10 times):
Feeling against body- harder than with foam padding
Suction- good
Leaks- none
Fluid buildup- same
Bathmate “rings”- less than without mod
I hope this will solves the problem for the BathmateG users.
KingCobra
The foam padding that touches your body while using the Bathmate will eventually come off, no matter how careful you handle it. When this happens you got a few options to get you Bathmate back into action; like buy new foam padding and glue it back on or buy a silicon sleeve. If you’re working with a BathmateG chances of finding a proper sleeve are very small.
I was tired of searching for a sleeve and didn’t like the idea of gluing another mofo back on just to lose it even sooner. I came up with an idea to use blue disposable power-free plastic gloves (used in labs and food industries), large size. It is so easy, such a minor mod, but IMHO it makes the difference.
Here is how to employ it:
1. First you need to completely get rid of the foam padding and all of the remaining glue. It will come off quite easy when dry.
2. Take a LARGE blue power-free disposable plastic glove and cut off the half of all fingers. Then cut all pieces that separate the fingers (except the thumb). Unite four fingers! You want to keep the material as long as possible.
3. The finger part of the glove will stay inside the BathmateG and wrist part can be fitted behind the first “ribs” of the pump.
4. Fill up your BathmateG and you’ll see that water pushes the glove outside. This part is hard to explain for me, it is more an experience thing. You should have a hole to put your erect penis in, so you might want to let some water out and push the material to the side. Fill it up as much as possible. Now press the BathmateG against you body and carefully pump. You might end up with water trapped in the glove material outside the BathmateG. Just pump and try to get rid of that water. You may perfectly succeed with this step at first, but it will come fast.
5. Pump for 20 min with your own pump intervals. Throw away the glove when finished.
When properly executed (I tested it over 10 times):
Feeling against body- harder than with foam padding
Suction- good
Leaks- none
Fluid buildup- same
Bathmate “rings”- less than without mod
I hope this will solves the problem for the BathmateG users.
KingCobra
